Welcome! Log In Create A New Profile

Advanced

Debian on Zyxel NSA310 - another example

Posted by eine 
eine
Debian on Zyxel NSA310 - another example
March 20, 2016 02:29PM
vcheche,

Thank you for answer, indeed 4.4 exist, I've just quick follow up, I was able to generate uInitrd like this:
in /mnt/sdh2 I've extracted
Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2
and did chroot:
apt-get install qemu-user-static
cp /usr/bin/qemu-arm-static /mnt/sdh2/usr/bin/
chroot /mnt/sdh2/ qemu-arm-static /bin/bash
Qemu-arm-static is needed to do chroot for diffrent architecture.
Then I've extracted to /mnt/sdh2/boot:
linux-4.4.0-kirkwood-tld-1-bodhi.tar.bz2
Then I've installed two debs from tar:
linux-headers-4.4.0-kirkwood-tld-1_1.0_armel.deb 
linux-image-4.4.0-kirkwood-tld-1_1.0_armel.deb
This operation generated initramfs. Then I've converted uImage and uInitrd. I've modified uboot to support systemd.
Debian booted successfully, but this kernel:
- NSA310 lacks support of LEDs, there's no: /sys/class/leds/nsa310
- fw_printenv is broken, lack of partitions in /proc/mtd, no info in dmsg.
- power button is not working, there's no: `gpio-keys as /devices/platform/gpio-keys/input/input0`
- WOL works.
- device start/reboots without any noise in boot/shutdown logs.

Does this kernel miss something? Is it not compiled or not patched?

-----
Moderator edit: these questions are more general so made it its own topic.



Edited 3 time(s). Last edit at 03/21/2016 11:54AM by bodhi.
Re: Question about kirkwood kernel and rootfs
March 20, 2016 03:09PM
eine,

From your questions, I assume you've installed this kernel on NSA310.

> and did chroot:
> apt-get install qemu-user-static
> cp /usr/bin/qemu-arm-static /mnt/sdh2/usr/bin/
> chroot /mnt/sdh2/ qemu-arm-static /bin/bash

No need to do chroot when you create rootfs Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar. All you need is a Linux box. The architecture does not come in to play when you tar the rootfs into an Ext3 partition on a new USB drive.

> - NSA310 lacks support of LEDs, there's no:
> /sys/class/leds/nsa310

You probably need to use the correct version of the NSA310 DTB (there are 3 versions):

/boot/dts/kirkwood-nsa310.dtb
/boot/dts/kirkwood-nsa310a.dtb
/boot/dts/kirkwood-nsa310b-lmsensor-redusbled.dtb


> - fw_printenv is broken, lack of partitions in
> /proc/mtd, no info in dmsg.

You need to use the correct mtdparts in kernel bootargs.

> - power button is not working, there's no:
> `gpio-keys as
> /devices/platform/gpio-keys/input/input0`

This should work with the correct DTB.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 03/20/2016 03:11PM by bodhi.
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 03:19PM
bodhi Wrote:
-------------------------------------------------------
> eine,
>
> From your questions, I assume you've installed
> this kernel on NSA310.

That's correct.

> > and did chroot:
> > apt-get install qemu-user-static
> > cp /usr/bin/qemu-arm-static /mnt/sdh2/usr/bin/
> > chroot /mnt/sdh2/ qemu-arm-static /bin/bash
>
> No need to do chroot when you create rootfs
> Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar. All
> you need is a Linux box. The architecture does not
> come in to play when you tar the rootfs into an
> Ext3 partition on a new USB drive.

I did this, because I wanted to install your root fs directly on HDD. I needed it (chroot) to generate initramfs.

> > - NSA310 lacks support of LEDs, there's no:
> > /sys/class/leds/nsa310
>
> You probably need to use the correct version of
> the NSA310 DTB (there are 3 versions):
>
>
> /boot/dts/kirkwood-nsa310.dtb
> /boot/dts/kirkwood-nsa310a.dtb
> /boot/dts/kirkwood-nsa310b-lmsensor-redusbled.dtb
>

I've used first one: kirkwood-nsa310.dtb .

> > - fw_printenv is broken, lack of partitions in
> > /proc/mtd, no info in dmsg.
>
> You need to use the correct mtdparts in kernel
> bootargs.
>
> > - power button is not working, there's no:
> > `gpio-keys as
> > /devices/platform/gpio-keys/input/input0`
>
> This should work with the correct DTB.

I'll let u know right away.
Re: Question about kirkwood kernel and rootfs
March 20, 2016 03:33PM
eine,

The initramfs is already in the rootfs.

-rw-r--r--  1 root root 7466909 Jan 28 15:00 initrd.img-4.4.0-kirkwood-tld-1
-rw-r--r--  1 root root 7466973 Jan 28 15:17 uInitrd.4.4.0-kirkwood-tld-1

-bodhi
===========================
Forum Wiki
bodhi's corner
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 03:47PM
Thank you for help.

I've regenerated again uImage and uInitrd, led works, I mean that:
/sys/class/leds/nsa310 appered, but how do you configure hdd led? I mean its activity?

I am testing now (which also appeared):
/devices/platform/gpio_keys/input/input0

Apparently bad /proc/mtd is also my fault, I am debugging it now.
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 04:32PM
bodhi, everything works as expected. WOW, nice job. :)
Re: Question about kirkwood kernel and rootfs
March 20, 2016 04:32PM
Ah. Thanks for the question! I forgot to add the LED activities for NSA310 in the new rootfs. These are the relevant trigger names:

nsa310:green:sys
nsa310:green:hdd

Look for the activity settings in the rootfs /etc/rc.local and /etc/init.d/halt, and replace the ones in there with

normal
if [ -d /sys/class/leds/nsa310:green:sys ]; then
   echo default-on > /sys/class/leds/nsa310:green:sys/trigger
fi
hdd
if [ -d /sys/class/leds/nsa310:green:hdd ]; then
   echo ide-disk1  > /sys/class/leds/nsa310:green:hdd/trigger 
fi
halt
if [ -d /sys/class/leds/nsa310:green:sys ]; then
   echo none > /sys/class/leds/nsa310:green:sys/trigger
fi

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 03/20/2016 05:34PM by bodhi.
Re: Question about kirkwood kernel and rootfs
March 20, 2016 04:32PM
eine Wrote:
-------------------------------------------------------
> bodhi, everything works as expected. WOW, nice
> job. :)


Cool:)

-bodhi
===========================
Forum Wiki
bodhi's corner
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 05:41PM
Correct u-boot variable to support fw_printenv:
bootargs=console=ttyS0,115200 root=/dev/sda2 init=/bin/systemd mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
root@nsa310:~# cat /etc/fw_env.config 
# MTD device name       Device offset   Env. size       Flash sector size       Number of sectors
/dev/mtd1               0x0000          0x20000         0x20000                 4
Example output of fw_printenv:
root@nsa310:~# fw_printenv 
bootdelay=2
baudrate=115200
loads_echo=0
eth1addr=00:19:CB:00:51:82
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
nandEcc=1bit
PRODUCT_NAME=NSA-310
FEATURE_BIT=00
CONTRY_TYPE=FF
VENDOR_NAME=ZyXEL Communications Corp.
run_diag=yes
ethaddr=50:67:F0:69:AB:58
MODEL_ID=A203
arcNumber=4022
console=100000
=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root)
CASset=min
ethprime=egiga1
bootargs_root=root=/dev/nfs rw
bootargs_end=:::orion:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
ethmtu=1500
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
MALLOC_len=3
bootcmd=ide reset;ext2load ide 0:1 0x800000 /uImage;ext2load ide 0:1 0xd00000 /uInitrd;bootm 0x800000 0xd00000
stdin=serial
stdout=serial
stderr=serial
nandEnvBase=100000
mainlineLinux=yes
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
disaMvPnp=no
hddPowerCtrl=no
enaAutoRecovery=yes
kernel_addr=0x4640000
pcieTune=no
ethact=egiga1
bootargs=console=ttyS0,115200 root=/dev/sda2 init=/bin/systemd mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)

Led support:
root@nsa310:~# cat /etc/rc.local  
#!/bin/sh -e
#
# rc.local

# turn on LED

echo default-on >  /sys/class/leds/nsa310\:green\:sys/trigger 
echo ide-disk1 > /sys/class/leds/nsa310\:green\:hdd/trigger 
exit 0

Fix power button:
apt-get install esekeyd
Enable deamon in:
root@nsa310:~# cat /etc/default/esekeyd 
# Defaults for esekeyd initscript

# Start esekeyd on boot (set it to "true" to enable)
START_ESEKEYD=true

# Daemon options, at last config location must be present
DAEMON_OPTS=/etc/esekeyd.conf
Create config file:
root@nsa310:~# cat /etc/esekeyd.conf 
#
# ESE Key Deamon 1.2.7 config file
#

#
# example 1: to run mutt in xterm we must set DISPLAY
#            so the command line will be as follows:
#MAIL:/bin/sh -c "DISPLAY=:0 xterm -e mutt"
#
# example 2: turn on/off GPS reciever when lid is open/closed
#RADIO(press):echo 1 >/sys/device/platform/gps/gps_power
#RADIO(release):echo 0 >/sys/device/platform/gps/gps_power
#
# example 3: run nautilus when both left meta and e keys are press
#LEFTMETA+E:nautilus
#

#POWER(press): /usr/bin/logger -s -i "POWER button pushed"
POWER:/sbin/shutdown -h now
Fix missing realtek firmware during updating initramfs (non-free repo):
apt-get install firmware-realtek
Creating zImage.fdt
cp -a zImage-4.4.0-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-nsa310.dtb >> zImage.fdt
Generating and converting uImage and uInitrd:
update-initramfs -u
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.4.0-kirkwood-tld-1 -d initrd.img-4.4.0-kirkwood-tld-1 uInitrd
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.4.0-kirkwood-tld-1 -d zImage.fdt uImage
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 05:45PM
Tags: zyxel NSA310, LEDs, power button, mtdparts, kirkwood, debian, jessie
eine
Re: Question about kirkwood kernel and rootfs
March 20, 2016 05:52PM
Fix wrong MAC addres:
root@nsa310:~# fw_printenv ethaddr | /bin/grep -E -o '[[:xdigit:]]{2}(:[[:xdigit:]]{2}){5}'
50:67:F0:69:AB:58
root@nsa310:~# cat /etc/network/interfaces
auto lo eth0
iface lo inet loopback
iface eth0 inet dhcp
    hwaddress ether 50:67:F0:69:AB:58
Re: Question about kirkwood kernel and rootfs
March 21, 2016 03:05AM
@eine,

If you don't mind: change the title of your first post to:

Debian on Zyxel NSA310 - another example

I think you've posted a real good write up of how to install new kernel on this box:
http://forum.doozan.com/read.php?2,26826,26840#msg-26840

-bodhi
===========================
Forum Wiki
bodhi's corner
eine
Re: Question about kirkwood kernel and rootfs
March 21, 2016 06:20AM
Sure, you are the moderator here and it's just my little contribution for your help. :)
eine
Re: Question about kirkwood kernel and rootfs
March 21, 2016 07:20AM
PS. I cannot edit it. ;)
Re: Question about kirkwood kernel and rootfs
November 22, 2017 09:05AM
Hello Bodhi,

reporting success for nsa-310 and kernel 4.13.5. I didn't test new filesystem, just a new kernel. Root FS is an updated version of Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 to:
root@nsa310:~# cat /etc/debian_version 
9.2

I've tested:
- 2TB/4TB HDD with GPT (I guess 8TB and 10TB should be supported too, but the unit may require better power supply - like 4A/12V)
- Wake On Lan
- LEDs
- fan control
- mtdparts
- powerbutton
- both USB ports
- S.M.A.R.T.
- unclear shutdown rootfs fsck test and repair

u-boot configuration:
root@nsa310:~# fw_printenv 
bootdelay=2
baudrate=115200
loads_echo=0
eth1addr=00:19:CB:00:51:82
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
nandEcc=1bit
PRODUCT_NAME=NSA-310
FEATURE_BIT=00
CONTRY_TYPE=FF
VENDOR_NAME=ZyXEL Communications Corp.
run_diag=yes
ethaddr=50:67:F0:69:56:9B
MODEL_ID=A203
arcNumber=4022
stdin=serial
stdout=serial
stderr=serial
console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root)
mainlineLinux=yes
CASset=min
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
ethprime=egiga1
netbsd_en=no
vxworks_en=no
bootargs_root=root=/dev/nfs rw
bootargs_end=:::orion:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
disaMvPnp=no
ethmtu=1500
eth1mtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
hddPowerCtrl=no
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
enaAutoRecovery=yes
kernel_addr=0xc80000
pcieTune=no
ethact=egiga1
bootargs=console=ttyS0,115200 root=/dev/sda2 init=/bin/systemd fsck.mode=force fsck.repair=yes mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
bootcmd=ide reset; ide read 0x800000 0x5000 0x2000; ide read 0xd00000 0xA000 0x5000; bootm 0x800000 0xd00000

root@nsa310:~# ls -l /boot/ /boot/4.13.5-kirkwood-tld1-bodhi/
/boot/:
total 72552
drwxr-xr-x 3 root root     4096 Nov 22 16:29 4.13.5-kirkwood-tld1-bodhi
-rw-r--r-- 1 root root   154699 Oct  7 10:53 config-4.13.5-kirkwood-tld-1
-rw-r--r-- 1 root root   140949 Jan 26  2016 config-4.4.0-kirkwood-tld-1
drwxr-xr-x 2 root root     4096 Jan 26  2016 dts
-rw-r--r-- 1 root root  8510569 Nov 22 16:21 initrd.img-4.13.5-kirkwood-tld-1
-rw-r--r-- 1 root root  8867114 Nov 22 15:09 initrd.img-4.4.0-kirkwood-tld-1
-rw-r--r-- 1 root root   114393 Jan 30  2016 linux-4.4.0-kirkwood-tld-1.patch
-rw-r--r-- 1 root root  1116160 Jan 30  2016 linux-dtb-4.4.0-kirkwood-tld-1.tar
-rw-r--r-- 1 root root  7511582 Jan 26  2016 linux-headers-4.4.0-kirkwood-tld-1_1.0_armel.deb
-rw-r--r-- 1 root root 17561216 Jan 26  2016 linux-image-4.4.0-kirkwood-tld-1_1.0_armel.deb
drwx------ 2 root root     4096 Mar 20  2016 lost+found
-rw------- 1 root root  2546047 Oct  7 13:26 System.map-4.13.5-kirkwood-tld-1
-rw------- 1 root root  2240040 Jan 26  2016 System.map-4.4.0-kirkwood-tld-1
-rw-r--r-- 1 root root  3167962 Nov 22 15:09 uImage
-rw-r--r-- 1 root root  8867178 Nov 22 15:09 uInitrd
-rw------- 1 root root  3848000 Oct  7 13:26 vmlinuz-4.13.5-kirkwood-tld-1
-rw------- 1 root root  3154832 Jan 26  2016 vmlinuz-4.4.0-kirkwood-tld-1
-rwxr-xr-x 1 root root  3154832 Jan 26  2016 zImage-4.4.0-kirkwood-tld-1
-rwxr-xr-x 1 root root  3167898 Nov 22 15:09 zImage.fdt

/boot/4.13.5-kirkwood-tld1-bodhi/:
total 47952
-rw-r--r-- 1 root root   154699 Oct  7 10:53 config-4.13.5-kirkwood-tld-1
drwxr-xr-x 2 root root     4096 Sep 20 10:13 dts
-rw-r--r-- 1 root root   142721 Oct  9 10:05 linux-4.13.5-kirkwood-tld-1.patch
-rw-r--r-- 1 root root  1300480 Oct  8 00:55 linux-dtb-4.13.5-kirkwood-tld-1.tar
-rw-r--r-- 1 root root  8653960 Oct  7 13:49 linux-headers-4.13.5-kirkwood-tld-1_1.0_armel.deb
-rw-r--r-- 1 root root 18669874 Oct  7 13:32 linux-image-4.13.5-kirkwood-tld-1_1.0_armel.deb
-rw-r--r-- 1 root root  3860522 Nov 22 16:26 uImage
-rw-r--r-- 1 root root  8510633 Nov 22 16:25 uInitrd
-rwxr-xr-x 1 root root  3848000 Oct  7 08:56 zImage-4.13.5-kirkwood-tld-1
-rwxr-xr-x 1 root root  3860458 Nov 22 16:21 zImage.fdt

root@nsa310:~# parted /dev/sda unit MiB print
Model: ATA WDC WD20EFRX-68E (scsi)
Disk /dev/sda: 1907729MiB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start     End         Size        File system     Name  Flags
 1      1000MiB   5096MiB     4096MiB     linux-swap(v1)
 2      5096MiB   46056MiB    40960MiB    ext2
 3      46056MiB  1907729MiB  1861673MiB  btrfs

root@nsa310:~# free -h
              total        used        free      shared  buff/cache   available
Mem:           241M         25M        185M        1.8M         31M        206M
Swap:          4.0G          0B        4.0G

root@nsa310:~# uname -a
Linux nsa310 4.13.5-kirkwood-tld-1 #1 PREEMPT Fri Oct 6 23:54:39 PDT 2017 armv5tel GNU/Linux

Kernel installation:
cd /boot/4.13.5-kirkwood-tld1-bodhi/
cp -a zImage-4.13.5-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-nsa310a.dtb >> zImage.fdt
update-initramfs -uv
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.13.5-kirkwood-tld-1 -d /boot/initrd.img-4.13.5-kirkwood-tld-1 /boot/4.13.5-kirkwood-tld1-bodhi/uInitrd
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.13.4-kirkwood-tld-1 -d /boot/4.13.5-kirkwood-tld1-bodhi/zImage.fdt /boot/4.13.5-kirkwood-tld1-bodhi/uImage
dd if=/boot/4.13.5-kirkwood-tld1-bodhi/uImage of=/dev/sda bs=1MiB seek=10
dd if=/boot/4.13.5-kirkwood-tld1-bodhi/uInitrd of=/dev/sda bs=1MiB seek=20

Boot/shutdown console logs:
         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Feb 22 2011 - 10:31:35) Marvell version: 3.4.19

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CFEE0

Soc: 88F6281 A1 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size 256MB
DRAM Total size 256MB  16bit width
Addresses 10M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (10M - 7M): Done
NAND:128 MB
Flash:  0 kB

CPU : Marvell Feroceon (Rev 1)
Kernel address is 0xc80000.

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0

Reset IDE:
Marvell Serial ATA Adapter
Integrated Sata device found
[0 0 0]: Enable DMA mode (6)
  Device 0 @ 0 0:
Model: WDC WD20EFRX-68EUZN0                     Firm: 80.00A80 Ser#:      WD-WMC4M2857576
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)


IDE read: device 0 block # 20480, count 8192 ... 8192 blocks read: OK

IDE read: device 0 block # 40960, count 20480 ... 20480 blocks read: OK
## Booting image at 00800000 ...
   Image Name:   Linux-4.13.4-kirkwood-tld-1
   Created:      2017-11-22  15:26:22 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3860458 Bytes =  3.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00d00000 ...
   Image Name:   initramfs-4.13.5-kirkwood-tld-1
   Created:      2017-11-22  15:25:20 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    8510569 Bytes =  8.1 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.13.5-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 PREEMPT Fri Oct 6 23:54:39 PDT 2017
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ZyXEL NSA310
[    0.000000] Memory policy: Data cache writeback
[    0.000000] INITRD: 0x00d00000+0x0081e000 overlaps in-use memory region - disabling initrd
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 init=/bin/systemd fsck.mode=force fsck.repair=yes mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 246448K/262144K available (8192K kernel code, 713K rwdata, 2008K rodata, 1024K init, 284K bss, 15696K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0900000   (9184 kB)
[    0.000000]       .init : 0xc0c00000 - 0xc0d00000   (1024 kB)
[    0.000000]       .data : 0xc0d00000 - 0xc0db2744   ( 714 kB)
[    0.000000]        .bss : 0xc0db91bc - 0xc0e001d4   ( 285 kB)
[    0.000000] random: get_random_u32 called from cache_alloc_refill+0x378/0x8dc with crng_init=0
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Tasks RCU enabled.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000039] Switching to timer-based delay loop, resolution 5ns
[    0.000487] Console: colour dummy device 80x30
[    0.000519] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.000539] pid_max: default: 32768 minimum: 301
[    0.000721] Security Framework initialized
[    0.000855] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000877] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001680] CPU: Testing write buffer coherency: ok
[    0.002637] Setting up static identity map for 0x100000 - 0x100058
[    0.002906] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.003137] Hierarchical SRCU implementation.
[    0.006308] devtmpfs: initialized
[    0.010594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.010621] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.010984] prandom: seed boundary self test passed
[    0.015165] prandom: 100 self tests passed
[    0.015177] pinctrl core: initialized pinctrl subsystem
[    0.016194] NET: Registered protocol family 16
[    0.016678] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.018096] cpuidle: using governor ladder
[    0.018160] cpuidle: using governor menu
[    0.018682] Feroceon L2: Enabling L2
[    0.018725] Feroceon L2: Cache support initialised.
[    0.023951] No ATAGs?
[    0.033473] vgaarb: loaded
[    0.033788] SCSI subsystem initialized
[    0.034283] usbcore: registered new interface driver usbfs
[    0.034360] usbcore: registered new interface driver hub
[    0.034435] usbcore: registered new device driver usb
[    0.035644] clocksource: Switched to clocksource orion_clocksource
[    0.125340] VFS: Disk quotas dquot_6.6.0
[    0.125424] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.135829] NET: Registered protocol family 2
[    0.136558] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.136597] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.136628] TCP: Hash tables configured (established 2048 bind 2048)
[    0.136708] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.136732] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.136909] NET: Registered protocol family 1
[    0.137322] RPC: Registered named UNIX socket transport module.
[    0.137335] RPC: Registered udp transport module.
[    0.137342] RPC: Registered tcp transport module.
[    0.137349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.137783] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.138670] audit: initializing netlink subsys (disabled)
[    0.139127] Initialise system trusted keyrings
[    0.139177] Key type blacklist registered
[    0.139275] audit: type=2000 audit(0.133:1): state=initialized audit_enabled=0 res=1
[    0.139352] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[    0.139436] zbud: loaded
[    0.140301] NFS: Registering the id_resolver key type
[    0.140327] Key type id_resolver registered
[    0.140336] Key type id_legacy registered
[    0.140354] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.140364] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.140574] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.140772] fuse init (API version 7.26)
[    0.141118] orangefs_debugfs_init: called with debug mask: :none: :0:
[    0.141318] orangefs_init: module version upstream loaded
[    0.141329] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    2.555657] random: fast init done
[    6.056644] jitterentropy: Initialization failed with host not compliant with requirements: 2
[    6.057472] Key type asymmetric registered
[    6.057485] Asymmetric key parser 'x509' registered
[    6.057546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    6.057558] io scheduler noop registered
[    6.057566] io scheduler deadline registered
[    6.057642] io scheduler cfq registered (default)
[    6.058869] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[    6.060854] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00
[    6.060876] pci_bus 0000:00: root bus resource [io  0x1000-0xfffff]
[    6.060890] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[    6.060904] pci_bus 0000:00: root bus resource [bus 00-ff]
[    6.061253] PCI: bus0: Fast back to back transfers disabled
[    6.061277] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    6.085761] PCI: bus1: Fast back to back transfers disabled
[    6.085830] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[    6.085847] pci 0000:00:01.0: BAR 13: assigned [io  0x10000-0x10fff]
[    6.085867] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
[    6.085884] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref]
[    6.085909] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref]
[    6.085931] pci 0000:01:00.0: BAR 0: assigned [io  0x10000-0x100ff]
[    6.085947] pci 0000:00:01.0: PCI bridge to [bus 01]
[    6.085960] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
[    6.085975] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
[    6.086083] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
[    6.086604] mv_xor f1060800.xor: Marvell shared XOR driver
[    6.146413] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    6.146646] mv_xor f1060900.xor: Marvell shared XOR driver
[    6.206410] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
[    6.206867] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    6.208233] console [ttyS0] disabled
[    6.208302] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[    6.951481] console [ttyS0] enabled
[    6.962405] loop: module loaded
[    6.966186] sata_mv f1080000.sata: slots 32 ports 2
[    6.973802] scsi host0: sata_mv
[    6.977447] scsi host1: sata_mv
[    6.980836] ata1: SATA max UDMA/133 irq 32
[    6.984954] ata2: SATA max UDMA/133 irq 32
[    6.989854] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    6.996337] nand: Samsung NAND 128MiB 3,3V 8-bit
[    7.000982] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    7.008616] Scanning device for bad blocks
[    7.014515] Bad eraseblock 18 at 0x000000240000
[    7.039585] Bad eraseblock 232 at 0x000001d00000
[    7.046291] Bad eraseblock 254 at 0x000001fc0000
[    7.072951] Bad eraseblock 484 at 0x000003c80000
[    7.129425] 9 cmdlinepart partitions found on MTD device orion_nand
[    7.135745] Creating 9 MTD partitions on "orion_nand":
[    7.140916] 0x000000000000-0x000000100000 : "uboot"
[    7.147020] 0x000000100000-0x000000180000 : "uboot_env"
[    7.153400] 0x000000180000-0x000000200000 : "key_store"
[    7.159884] 0x000000200000-0x000000280000 : "info"
[    7.165772] 0x000000280000-0x000000c80000 : "etc"
[    7.171542] 0x000000c80000-0x000001680000 : "kernel_1"
[    7.177792] 0x000001680000-0x000004640000 : "rootfs1"
[    7.184209] 0x000004640000-0x000005040000 : "kernel_2"
[    7.190567] 0x000005040000-0x000008000000 : "rootfs2"
[    7.198352] libphy: Fixed MDIO Bus: probed
[    7.203354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.209964] ehci-pci: EHCI PCI platform driver
[    7.214497] ehci-orion: EHCI orion driver
[    7.218794] orion-ehci f1050000.ehci: EHCI Host Controller
[    7.224373] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[    7.232282] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[    7.265670] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[    7.271952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.278821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.286113] usb usb1: Product: EHCI Host Controller
[    7.291018] usb usb1: Manufacturer: Linux 4.13.5-kirkwood-tld-1 ehci_hcd
[    7.297788] usb usb1: SerialNumber: f1050000.ehci
[    7.303164] hub 1-0:1.0: USB hub found
[    7.307025] hub 1-0:1.0: 1 port detected
[    7.311596] usbcore: registered new interface driver usb-storage
[    7.318013] mousedev: PS/2 mouse device common for all mice
[    7.324179] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
[    7.331337] i2c /dev entries driver
[    7.337764] hidraw: raw HID events driver (C) Jiri Kosina
[    7.343552] drop_monitor: Initializing network drop monitor service
[    7.350180] NET: Registered protocol family 17
[    7.354724] Key type dns_resolver registered
[    7.359874] registered taskstats version 1
[    7.363993] Loading compiled-in X.509 certificates
[    7.368894] zswap: loaded using pool lzo/zbud
[    7.379531] Key type big_key registered
[    7.385236] Key type encrypted registered
[    7.390677] rtc-mv f1010300.rtc: setting system clock to 2017-11-22 15:17:30 UTC (1511363850)
[    7.495695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[    7.504446] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 80.00A80, max UDMA/133
[    7.511209] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    7.520591] ata1.00: configured for UDMA/133
[    7.535331] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A80 PQ: 0 ANSI: 5
[    7.544722] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    7.553023] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    7.558419] sd 0:0:0:0: [sda] Write Protect is off
[    7.563360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.621253]  sda: sda1 sda2 sda3
[    7.626578] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.665685] usb 1-1: new high-speed USB device number 2 using orion-ehci
[    7.857414] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    7.864181] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.871407] usb 1-1: Product: USB2.0 Hub
[    7.876258] hub 1-1:1.0: USB hub found
[    7.880415] hub 1-1:1.0: 4 ports detected
[    7.890211] ata2: SATA link down (SStatus 0 SControl F300)
[    7.934181] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[    7.954835] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    7.962051] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    7.981769] devtmpfs: mounted
[    7.987649] Freeing unused kernel memory: 1024K
[    8.628369] systemd[1]: Module 'ipv6' is blacklisted
[    8.673955] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.728264] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.746963] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

[    8.786154] systemd[1]: Set hostname to <nsa310>.
[    9.644537] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    9.676099] systemd[1]: Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on fsck to fsckd communication Socket.
[    9.716179] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    9.749316] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    9.809140] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    9.861534] systemd[1]: Starting File System Check on Root Device...
         Starting File System Check on Root Device...
[    9.916197] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on udev Control Socket.
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
         Mounting Debug File System...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
         Starting Create list of required st…ce nodes for the current kernel...
         Starting Nameserver information manager...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
         Starting Journal Service...
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Debug File System.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started File System Check Daemon to report status.
         Starting Create Static Device Nodes in /dev...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...)
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Nameserver information manager.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Journal Service.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started udev Kernel Device Manager.e)
[   19.831485] random: crng init done complete)
[  OK  ] Started File System Check on Root Device.
         Starting Remount Root and Kernel File Systems...
[   76.685812] EXT4-fs (sda2): re-mounted. Opts: (null)
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Mounted /tmp.
[   77.109608] systemd-journald[116]: Received request to flush runtime journal from PID 1
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target System Time Synchronized.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[   77.890496] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[  OK  ] Found device /dev/ttyS0.
[   78.202758] hwmon_vid: Unknown VRM version of your CPU
[   78.256841] lm85 0-002e: Starting monitoring
[   78.268227] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   78.269218] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd1949000, 00:00:00:00:00:30, XID 083000c0 IRQ 38
[   78.269227] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   78.353429] marvell-cesa f1030000.crypto: CESA device successfully registered
[   78.354694] orion_wdt: Initial timeout 21 sec
[   78.419063] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  OK  ] Found device WDC_WD20EFRX-68EUZN0 1.
[  OK  ] Found device WDC_WD20EFRX-68EUZN0 1.
         Activating swap Swap Partition...
[   79.014223] Adding 4194300k swap on /dev/sda1.  Priority:-1 extents:1 across:4194300k FS
[  OK  ] Activated swap Swap Partition.
[  OK  ] Activated swap /dev/disk/by-uuid/1789cdaa-6fa3-4909-b7d9-7d3e459a0140.
[  OK  ] Reached target Swap.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Basic System.
         Starting Initialize hardware monitoring sensors...
         Starting Login Service...
         Starting System Logging Service...
         Starting LSB: Starts syslogd...
[  OK  ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
         Starting LSB: ESE Key Daemon...
         Starting LSB: Starts the Name Service Cache Daemon...
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
[  OK  ] Started System Logging Service.
[  OK  ] Started LSB: Starts syslogd.
[  OK  ] Started LSB: Starts the Name Service Cache Daemon.
[  OK  ] Started Initialize hardware monitoring sensors.
         Starting LSB: Starts klogd...
[  OK  ] Started LSB: Starts klogd.
[  OK  ] Started Login Service.
[  OK  ] Started LSB: ESE Key Daemon.
[   81.157046] r8169 0000:01:00.0 eth0: link down
[   81.161534] r8169 0000:01:00.0 eth0: link down
[   83.977326] r8169 0000:01:00.0 eth0: link up
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting OpenVPN service...
         Starting Permit User Sessions...
         Starting Simple Network Management Protocol (SNMP) Daemon....
         Starting OpenBSD Secure Shell server...
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
         Starting LSB: LDAP connection daemon...
         Starting LSB: start Samba daemons for the AD DC...
[  OK  ] Started OpenVPN service.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Simple Network Management Protocol (SNMP) Daemon..
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: LDAP connection daemon.
[  OK  ] Started LSB: start Samba daemons for the AD DC.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
         Mounting Arbitrary Executable File Formats File System...
[  OK  ] Mounted Arbitrary Executable File Formats File System.
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux 9 nsa310 ttyS0

nsa310 login:


[  OK  ] Stopped target Timers.
[  OK  ] Stopped Daily Cleanup of Temporary Directories.
[  OK  ] Stopped Daily apt upgrade and clean activities.
[  OK  ] Stopped Daily apt download activities.
[  OK  ] Stopped target Graphical Interfac         Stopping Serial Getty on ttyS0...
[  OK  ] Stopped OpenVPN service.
[  OK  ] Stopped Initialize hardware monitoring sensors.
         Stopping D-Bus System Message Bus...
         Stopping Simple Network Management Protocol (SNMP) Daemon....
         Stopping LSB: ESE Key Daemon...
         Stopping LSB: start Samba daemons for the AD DC...
         Stopping LSB: Starts the Name Service Cache Daemon...
         Stopping LSB: Starts klogd...
         Stopping Getty on tty1...
         Stopping Login Service...
         Stopping Self Monitoring and Reporting Technology (SMART) Daemon...
         Stopping OpenBSD Secure Shell server...
         Stopping System Logging Service...
[  OK  ] Stopped Login Service.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped Self Monitoring and Reporting Technology (SMART) Daemon.
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped Simple Network Management Protocol (SNMP) Daemon..
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped Serial Getty on ttyS0.
[  OK  ] Stopped LSB: start Samba daemons for the AD DC.
[  OK  ] Stopped LSB: Starts the Name Service Cache Daemon.
[  OK  ] Stopped LSB: Starts klogd.
         Stopping LSB: Starts syslogd...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
         Stopping Permit User Sessions...
[  OK  ] Stopped /etc/rc.local Compatibility.
[  OK  ] Removed slice system-getty.slice.
         Stopping LSB: LDAP connection daemon...
[  OK  ] Stopped LSB: ESE Key Daemon.
[  OK  ] Stopped LSB: Starts syslogd.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped LSB: LDAP connection daemon.
[  OK  ] Stopped target System Time Synchronized.
[  OK  ] Stopped target Network is Online.
[  OK  ] Stopped target Network.
         Stopping Raise network interfaces...
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target System Initialization.
[  OK  ] Stopped target Encrypted Volumes.
[  OK  ] Stopped Forward Password Requests to Wall Directory Watch.
[  OK  ] Stopped Dispatch Password Requests to Console Directory Watch.
[  OK  ] Stopped target Swap.
         Deactivating swap Swap Partition...
         Deactivating swap /dev/disk/by-id/wwn-0x50014ee0ae6ff021-part1...
         Stopping Load/Save Random Seed...
         Stopping Update UTMP about System Boot/Shutdown...
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Deactivated swap /dev/disk/by-path/platform-f1080000.sata-ata-1-part1.
[  OK  ] Deactivated swap /dev/disk/by-partu…da65d-18f8-4ee7-9d87-2f86cc555d84.
[  OK  ] Deactivated swap /dev/disk/by-id/wwn-0x50014ee0ae6ff021-part1.
[  OK  ] Deactivated swap /dev/disk/by-id/at…FRX-68EUZN0_WD-WMC4M2857576-part1.
[  OK  ] Deactivated swap Swap Partition.
[  OK  ] Deactivated swap /dev/disk/by-uuid/…9cdaa-6fa3-4909-b7d9-7d3e459a0140.
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped Raise network interfaces.
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped target Local File Systems.
         Unmounting /tmp...
[  OK  ] Stopped Load Kernel Modules.
[  OK  ] Unmounted /tmp.
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[  306.762421] systemd-shutdow: 32 output lines suppressed due to ratelimiting
[  306.945848] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[  306.963714] systemd-journald[116]: Received SIGTERM from PID 1 (systemd-shutdow).
[  307.006562] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[  307.022576] systemd-shutdown[1]: Unmounting file systems.
[  307.029132] systemd-shutdown[1]: Remounting '/' read-only with options 'block_validity,delalloc,barrier,user_xattr,acl'.
[  307.105762] EXT4-fs (sda2): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,acl
[  307.325470] systemd-shutdown[1]: Remounting '/' read-only with options 'block_validity,delalloc,barrier,user_xattr,acl'.
[  307.336931] EXT4-fs (sda2): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,acl
[  307.345448] systemd-shutdown[1]: All filesystems unmounted.
[  307.351207] systemd-shutdown[1]: Deactivating swaps.
[  307.356458] systemd-shutdown[1]: All swaps deactivated.
[  307.361732] systemd-shutdown[1]: Detaching loop devices.
[  307.393747] systemd-shutdown[1]: All loop devices detached.
[  307.445794] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  307.451179] sd 0:0:0:0: [sda] Stopping disk
[  307.876067] reboot: Power down

Just one thing you may want to know about:
[  112.169306] ------------[ cut here ]------------
[  112.173962] WARNING: CPU: 0 PID: 522 at fs/filesystems.c:281 get_fs_type+0xa0/0xe4
[  112.183271] request_module fs-btrfs succeeded, but still no fs?
[  112.190216] Modules linked in: binfmt_misc evdev fixed sg uas lm85 hwmon_vid orion_wdt marvell_cesa r8169 gpio_keys uio_pdrv_genirq uio ip_tables x_tables autofs4
[  112.205856] CPU: 0 PID: 522 Comm: mount Not tainted 4.13.5-kirkwood-tld-1 #1
[  112.212933] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[  112.220646] [<c010ea24>] (unwind_backtrace) from [<c010ab28>] (show_stack+0x10/0x14)
[  112.229373] [<c010ab28>] (show_stack) from [<c011812c>] (__warn+0xe0/0xfc)
[  112.237236] [<c011812c>] (__warn) from [<c011817c>] (warn_slowpath_fmt+0x34/0x44)
[  112.244764] [<c011817c>] (warn_slowpath_fmt) from [<c0250f38>] (get_fs_type+0xa0/0xe4)
[  112.254113] [<c0250f38>] (get_fs_type) from [<c02549d4>] (do_mount+0x664/0xb30)
[  112.262359] [<c02549d4>] (do_mount) from [<c02550e4>] (SyS_mount+0x70/0x98)
[  112.270262] [<c02550e4>] (SyS_mount) from [<c0106ec0>] (ret_fast_syscall+0x0/0x38)
[  112.278767] ---[ end trace 8fb1adfba3d8f851 ]---

It happened during:
mount -t btrfs /dev/sda3 /srv/backup/ -o defaults,autodefrag,compress
Btrfs module somehow didn't load, I had to do it manually. It's not a big deal for me. Great work, congrats.



Edited 10 time(s). Last edit at 11/22/2017 09:42AM by eine.
Re: Question about kirkwood kernel and rootfs
November 22, 2017 03:41PM
eine,

Thanks for reporting! great job :)

> Btrfs module somehow didn't load, I had to do it
> manually. It's not a big deal for me. Great work,
> congrats.

Since btrfs is a module, you need to load it early enough in the boot process to make sure it is running before mounting. In sysvinit, we modify the modules file like this:

http://forum.doozan.com/read.php?2,9522

The above might still work in systemd.

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: