Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 29, 2016 03:07AM |
Registered: 8 years ago Posts: 295 |
Stage-1 Bootloader XCE_STAGE1: 1.1: Tue Feb 8 01:40:26 PST 2011 Attempting to set PLLA to 700MHz ... plla_ctrl0 : 0x0000000A plla_ctrl1 : 0x000E0000 plla_ctrl2 : 0x001C01A0 plla_ctrl3 : 0x00000016 PLLA Set Setup memory, testing Reading NAND, Image 0 Hdr len: 0x0001C030 Hdr CRC: 0x39F6D832 OK U-Boot 1.1.2 (Jul 29 2010 - 19:36:07) U-Boot code: 60D00000 -> 60D1C030 BSS: -> 60D21800 RAM Configuration: Bank #0: 60000000 128 MB SRAM Configuration: 64KB at 0x50000000 NAND:128 MiB In: serial Out: serial Err: serial Setting Linux mem= boot arg value Hit any key to stop autoboot: 0 CE>>
CE>> setenv ipaddr 192.168.10.245 CE>> setenv serverip 192.168.10.128 CE>> ping 192.168.10.128 Wait GMAC to reset Wait for PHY reset PHY is Realtek RTL8211D Wait for link to come up..........Link up Wait for auto-negotiation to complete Link is 1000M host 192.168.10.128 is alive CE>>
CE>> tftp 0x60500000 ox820/uImage Wait GMAC to reset Wait for PHY reset PHY is Realtek RTL8211D Wait for link to come up...........Link up Wait for auto-negotiation to complete Link is 1000M TFTP from server 192.168.10.128; our IP address is 192.168.10.245 Filename 'ox820/uImage'. Load address: 0x60500000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################################## done Bytes transferred = 4289601 (417441 hex) CE>> CE>> tftp 0x60e00000 ox820/uInitrd Wait GMAC to reset Wait for PHY reset PHY is Realtek RTL8211D Wait for link to come up...........Link up Wait for auto-negotiation to complete Link is 1000M TFTP from server 192.168.10.128; our IP address is 192.168.10.245 Filename 'ox820/uInitrd'. Load address: 0x60e00000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################## done Bytes transferred = 3874326 (3b1e16 hex) CE>>
CE>> setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootfstype=ext4 mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 rootwait mem=128M poweroutage=yes CE>>
CE>> bootm 0x60500000 0x60e00000 CE>>
setenv dtb_file '/dts/ox820-pogoplug-pro.dtb' setenv load_dtb 'echo loading DTB $dtb_file ...; fatload $bootdev $device 0x62c00000 $dtb_file' setenv load_initrd 'echo loading uInitrd ...; fatload $bootdev $device 0x60e00000 /uInitrd' setenv load_uimage 'echo loading uImage ...; fatload $bootdev $device 0x60500000 /uImage' setenv uenv_read 'echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /uEnv.txt; then setenv uenv_loaded 1; fi'
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 30, 2016 10:28AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 31, 2016 06:44AM |
Registered: 8 years ago Posts: 295 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 31, 2016 10:27AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 31, 2016 01:58PM |
Admin Registered: 13 years ago Posts: 18,548 |
Quote
Updated 02 Nov 2014:
Rootfs Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 was uploaded. This rootfs is to keep in sync with kernel Linux-3.17.0-oxnas-tld-1.
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable July 31, 2016 10:07PM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 07, 2016 04:29AM |
Registered: 7 years ago Posts: 114 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 08, 2016 12:58PM |
Admin Registered: 13 years ago Posts: 18,548 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 08, 2016 10:33PM |
Registered: 7 years ago Posts: 114 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 09, 2016 12:42AM |
Admin Registered: 13 years ago Posts: 18,548 |
Quote
Updated 02 Nov 2014:
Rootfs Debian-3.17.0-oxnas-tld-1-rootfs-bodhi.tar.bz2 was uploaded. This rootfs is to keep in sync with kernel Linux-3.17.0-oxnas-tld-1.
version printenv boot
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 15, 2016 01:12AM |
Registered: 7 years ago Posts: 114 |
Stage-1 Bootloader XCE_STAGE1: 1.1: Tue Feb 8 01:40:26 PST 2011 Attempting to set PLLA to 700MHz ... plla_ctrl0 : 0x0000000A plla_ctrl1 : 0x000E0000 plla_ctrl2 : 0x001C01A0 plla_ctrl3 : 0x00000016 PLLA Set Setup memory, testing Reading NAND, Image 0 Hdr len: 0x0001C030 Hdr CRC: 0x39F6D832 OK U-Boot 1.1.2 (Jul 29 2010 - 19:36:07) U-Boot code: 60D00000 -> 60D1C030 BSS: -> 60D21800 RAM Configuration: Bank #0: 60000000 128 MB SRAM Configuration: 64KB at 0x50000000 NAND:128 MiB In: serial Out: serial Err: serial Setting Linux mem= boot arg value Hit any key to stop autoboot: 0 CE>> onnection closed. Disconnected from remote host(pogpoplug) at 00:31:22. Type `help' to learn how to use Xshell prompt. [c:\~]$ Connecting to COM3... Connected. Hdr len: 0x0001C030 Hdr CRC: 0x39F6D832 OK U-Boot 1.1.2 (Jul 29 2010 - 19:36:07) U-Boot code: 60D00000 -> 60D1C030 BSS: -> 60D21800 RAM Configuration: Bank #0: 60000000 128 MB SRAM Configuration: 64KB at 0x50000000 NAND:128 MiB In: serial Out: serial Err: serial Setting Linux mem= boot arg value Hit any key to stop autoboot: 0 CE>>
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 15, 2016 02:34AM |
Registered: 7 years ago Posts: 114 |
Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x440000, size 0x90000 589824 bytes read: OK ## Starting application at 0x64000000 ... U-Boot 2014.04 (Jul 01 2014 - 00:52:16) for OXNAS DRAM: 128 MiB NAND: 128 MiB UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=1" UBI: MTD device size: 114 MiB UBI: number of good PEBs: 909 UBI: number of bad PEBs: 3 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 909 UBI: number of PEBs reserved for bad PEB handling: 9 UBI: max/mean erase counter: 2/1 Volume ubootenv not found! ** Unable to read env from ubi:ubootenv ** Volume ubootenv2 not found! ** Unable to read redundant env from ubi:ubootenv2 ** *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 Read 0 bytes from volume kernel to 62000000 Volume kernel not found! UBI: mtd1 is detached from ubi0 incorrect device type in data Partition data not found! ubifsumount - unmount UBIFS volume Usage: ubifsumount - unmount current volume NAND read: device 0 offset 0x4e0000, size 0x400000 4194304 bytes read: OK Wrong Image Format for bootm command ERROR: can't get kernel image! <NULL> Waiting for PHY auto negotiation to complete......... TIMEOUT ! Waiting for PHY realtime link...... TIMEOUT ! done <NULL>: No link. OX820 #
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 15, 2016 02:36AM |
Registered: 7 years ago Posts: 114 |
<NULL>: No link. OX820 # version U-Boot 2014.04 (Jul 01 2014 - 00:52:16) for OXNAS arm-openwrt-linux-uclibcgnueabi-gcc (OpenWrt/Linaro GCC 4.8-2014.04 20140629) 4.8.3 GNU ld (GNU Binutils) 2.22 OX820 # printenv autoload=no baudrate=115200 boot_dhcp=run load_kernel_dhcp && run boot_kernel; boot_kernel=bootm 0x62000000; boot_rescue=run load_kernel_rescue && run boot_kernel; boot_ubi=run load_kernel_ubi && run boot_kernel; boot_ubifs=run load_kernel_ubifs && run boot_kernel; ubifsumount ubi0; bootargs=console=ttyS0,115200n8 earlyprintk=serial bootcmd=run normalboot; bootdelay=1 console=console=ttyS0,115200n8 earlyprintk=serial ethact=dwmac.40400000 ethaddr=00:25:31:01:66:5F ipaddr=192.168.1.1 load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin; load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000; load_kernel_ubi=ubi readvol 0x62000000 kernel; load_kernel_ubifs=ubi part data &&ubifsmount ubi0 &&ubifsload 62000000 /boot/uImage.itb; mtddevname=boot mtddevnum=0 mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(ubi) normalboot=run boot_ubi; run boot_ubifs; run boot_rescue; run boot_dhcp; partition=nand0,0 serverip=192.168.1.100 stderr=serial stdin=serial stdout=serial Environment size: 1051/16379 bytes OX820 # boot Read 0 bytes from volume kernel to 62000000 Volume kernel not found! incorrect device type in data Partition data not found! ubifsumount - unmount UBIFS volume Usage: ubifsumount - unmount current volume NAND read: device 0 offset 0x4e0000, size 0x400000 4194304 bytes read: OK Wrong Image Format for bootm command ERROR: can't get kernel image! <NULL> Waiting for PHY auto negotiation to complete......... TIMEOUT ! Waiting for PHY realtime link...... TIMEOUT ! done <NULL>: No link. OX820 #
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 15, 2016 02:42AM |
Registered: 7 years ago Posts: 114 |
Re: Pogoplug Pro / v3 - flashing U-Boot / running Debian when internal rootfs isn't accessable November 16, 2016 12:34AM |
Admin Registered: 13 years ago Posts: 18,548 |