Need help install rootfs for Pogo Pro V3

Rob,

While in Debian, download the attached DTB to /boot/dts:

cd /boot/dts
mv ox820-pogoplug-pro.dtb ox820-pogoplug-pro.dtb.old
wget http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1
sync

Reboot and try to set the ethaddr using fw_setenv

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 2 time(s). Last edit at 01/24/2017 03:48PM by bodhi.

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> I'll compile a different version of the Pogo Pro
> DTB for you to test.


OK bodhi no problem. Please add installation instructions to it ;-)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> I'll compile a different version of the Pogo Pro
> DTB for you to test.


That is OK bodhi, but pls add an installation description to it... ;-)

See updated instruction above.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> While in Debian, download the attached DTB to
> /boot/dts:
>

> cd /boot/dts
> mv ox820-pogoplug-pro.dtb
> ox820-pogoplug-pro.dtb.old
> wget
> http://forum.doozan.com/file.php?2,file=1264,filen
> ame=ox820-pogoplug-pro.dtb,download=1
> sync
>

>
> Reboot and try to set the ethaddr using fw_setenv

Bodhi,

After rebooting the Pogoplug it does not make a connection.

So I mounted the Debian USB stick on my Raspberry and I found the ox820 file was downloaded but not with the right name. The name was part of the URL. Maybe I made a typing error in the wget...
I changed the name to the right one, ox820-pogoplu-pro.dtb and put the USB-stick back in de Pogoplug.

I restart the Pogoplug again and what happens.... The WiFi connection was up and not the Eth0 connection!
But the password was incorrect. I used root / root. So I could not start Debian.

Any ideas?
Rob

Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
> --------------------------------------------------
> -----
> > Rob,
> >
> > While in Debian, download the attached DTB to
> > /boot/dts:
> >

> > cd /boot/dts
> > mv ox820-pogoplug-pro.dtb
> > ox820-pogoplug-pro.dtb.old
> > wget
> >
> http://forum.doozan.com/file.php?2,file=1264,filen
> 
> > ame=ox820-pogoplug-pro.dtb,download=1
> > sync
> >

> >
> > Reboot and try to set the ethaddr using
> fw_setenv
>
> Bodhi,
>
> After rebooting the Pogoplug it does not make a
> connection.
>
> So I mounted the Debian USB stick on my Raspberry
> and I found the ox820 file was downloaded but not
> with the right name. The name was part of the URL.
> Maybe I made a typing error in the wget...
> I changed the name to the right one,
> ox820-pogoplu-pro.dtb and put the USB-stick back
> in de Pogoplug.
>
> I restart the Pogoplug again and what happens....
> The WiFi connection was up and not the Eth0
> connection!
> But the password was incorrect. I used root /
> root. So I could not start Debian.
>
> Any ideas?
> Rob

Ooops.... Sorry, I did not look very well. It was not the Pogoplug but my raspberry WiFi..
Now I connect the serial console and look what happens en post the messages.
Rob

Roberto48 Wrote:
-------------------------------------------------------
> Roberto48 Wrote:
> --------------------------------------------------
> -----
> > bodhi Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > Rob,
> > >
> > > While in Debian, download the attached DTB to
> > > /boot/dts:
> > >

> > > cd /boot/dts
> > > mv ox820-pogoplug-pro.dtb
> > > ox820-pogoplug-pro.dtb.old
> > > wget
> > >
> >
> http://forum.doozan.com/file.php?2,file=1264,filen
> 
> > 
> > > ame=ox820-pogoplug-pro.dtb,download=1
> > > sync
> > >

> > >
> > > Reboot and try to set the ethaddr using
> > fw_setenv
> >
> > Bodhi,
> >
> > After rebooting the Pogoplug it does not make a
> > connection.
> >
> > So I mounted the Debian USB stick on my
> Raspberry
> > and I found the ox820 file was downloaded but
> not
> > with the right name. The name was part of the
> URL.
> > Maybe I made a typing error in the wget...
> > I changed the name to the right one,
> > ox820-pogoplu-pro.dtb and put the USB-stick
> back
> > in de Pogoplug.
> >
> > I restart the Pogoplug again and what
> happens....
> > The WiFi connection was up and not the Eth0
> > connection!
> > But the password was incorrect. I used root /
> > root. So I could not start Debian.
> >
> > Any ideas?
> > Rob
>
> Ooops.... Sorry, I did not look very well. It was
> not the Pogoplug but my raspberry WiFi..
> Now I connect the serial console and look what
> happens en post the messages.
> Rob

Well I repaired the filename of the new downloaded dtb file but the kernel is in panic...

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] Start Ox820 platform
[    0.000000] PERCPU: Embedded 7 pages/cpu @c7ee3000 s6592 r8192 d13888 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 119844K/131072K available (5686K kernel code, 286K rwdata, 1680K rodata, 174K init, 233K bss, 11228K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0739db0   (7368 kB)
[    0.000000]       .init : 0xc073a000 - 0xc07659c0   ( 175 kB)
[    0.000000]       .data : 0xc0766000 - 0xc07adb00   ( 287 kB)
[    0.000000]        .bss : 0xc07adb00 - 0xc07e809c   ( 234 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns
[    0.000181] Console: colour dummy device 80x30
[    0.000212] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050048] pid_max: default: 32768 minimum: 301
[    0.050219] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050237] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051066] Initializing cgroup subsys net_cls
[    0.051130] CPU: Testing write buffer coherency: ok
[    0.051520] Setting up static identity map for 0x60567fa0 - 0x60567fd8
[    0.110451] CPU1: Booted secondary processor
[    0.170140] Brought up 2 CPUs
[    0.170160] SMP: Total of 2 processors activated.
[    0.171100] devtmpfs: initialized
[    0.175196] prandom: seed boundary self test passed
[    0.179115] prandom: 100 self tests passed
[    0.179138] pinctrl core: initialized pinctrl subsystem
[    0.181975] NET: Registered protocol family 16
[    0.182515] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.186775] gpio-oxnas 44000000.gpio: at address c8846000
[    0.187051] gpio-oxnas 44100000.gpio: at address c8848000
[    0.187594] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.309132] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5
[    0.309248] oxnas-pcie 47c0: link up
[    0.309483] oxnas-pcie 47c0: PCI host bridge to bus 0000:00
[    0.309511] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.309529] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.309550] pci_bus 0000:00: root bus resource [io  0x4be00000-0x4befffff]
[    0.309570] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.310056] PCI: bus0: Fast back to back transfers disabled
[    0.310136] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[    0.310535] vgaarb: loaded
[    0.311029] SCSI subsystem initialized
[    0.311907] usbcore: registered new interface driver usbfs
[    0.312010] usbcore: registered new interface driver hub
[    0.312212] usbcore: registered new device driver usb
[    0.312327] pps_core: LinuxPPS API ver. 1 registered
[    0.312340] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312407] PTP clock support registered
[    0.313856] cfg80211: Calling CRDA to update world regulatory domain
[    0.314337] Switched to clocksource rps_clocksource_timer
[    0.328128] NET: Registered protocol family 2
[    0.329241] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.329282] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.329315] TCP: Hash tables configured (established 1024 bind 1024)
[    0.329402] TCP: reno registered
[    0.329428] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.329466] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.329768] NET: Registered protocol family 1
[    0.330291] RPC: Registered named UNIX socket transport module.
[    0.330311] RPC: Registered udp transport module.
[    0.330324] RPC: Registered tcp transport module.
[    0.330334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.330731] Unpacking initramfs...
[    0.530547] Freeing initrd memory: 1904K (c7c4e000 - c7e2a000)
[    0.531648] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.549767] NFS: Registering the id_resolver key type
[    0.549834] Key type id_resolver registered
[    0.549847] Key type id_legacy registered
[    0.549885] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.549903] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.550858] fuse init (API version 7.23)
[    0.552204] msgmni has been set to 237
[    0.552719] Key type big_key registered
[    0.556472] alg: No test for stdrng (krng)
[    0.631101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.631132] io scheduler noop registered
[    0.631152] io scheduler deadline registered
[    0.631503] io scheduler cfq registered (default)
[    0.632033] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.633303] console [ttyS0] disabled
[    0.633428] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
[    1.188582] console [ttyS0] enabled
[    1.193098] Unable to handle kernel paging request at virtual address c8885000
[    1.200286] pgd = c0004000
[    1.203018] [c8885000] *pgd=67823811, *pte=00000000, *ppte=00000000
[    1.209269] Internal error: Oops: 807 [#1] PREEMPT SMP ARM
[    1.214722] Modules linked in:
[    1.217766] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.17.0-oxnas-tld-1 #1
[    1.224693] task: c783c000 ti: c7840000 task.ti: c7840000
[    1.230072] PC is at sata_oxnas_set_mode+0x90/0x240
[    1.234931] LR is at sata_oxnas_post_reset_init+0x20/0x120
[    1.240389] pc : [<c0334988>]    lr : [<c0334b58>]    psr: 00000113
[    1.240389] sp : c7841d74  ip : c8884000  fp : c7907010
[    1.251806] r10: c788ca70  r9 : c7807300  r8 : c725c000
[    1.257006] r7 : c7907010  r6 : 00000001  r5 : c079a8c0  r4 : 00000000
[    1.263498] r3 : c8885000  r2 : c0593fd8  r1 : 00000000  r0 : 0228a280
[    1.269992] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    1.277263] Control: 00c5787d  Table: 6000400a  DAC: 00000015
[    1.282977] Process swapper/0 (pid: 1, stack limit = 0xc78401c0)
[    1.288949] Stack: (0xc7841d74 to 0xc7842000)
[    1.293283] 1d60:                                              c725c000 00000000 c7259380
[    1.301422] 1d80: c725c000 c7259380 c788c9d0 c0334d30 00000000 c788ca70 c7807300 67258000
[    1.309560] 1da0: c7907010 00000000 c788ca30 00000001 c7259370 c031e788 00000080 c788ca30
[    1.317698] 1dc0: 00000032 c079a918 00000080 c88c0000 c0334660 c0323de0 c8882000 c8884000
[    1.325839] 1de0: c88c0000 c0324158 00000000 c8888000 c8882000 c8884000 c88c0000 c7807300
[    1.333977] 1e00: c788c9d0 c0334084 c079a918 c010de88 00000000 00000032 00000001 44900000
[    1.342115] 1e20: 4490000b c7ef8ed8 00000200 00000000 00000000 00000000 c0593a9c 00000000
[    1.350254] 1e40: 00000000 c7907010 c079a8d4 c7907010 00000000 c079a8d4 c0763398 c72591a0
[    1.358394] 1e60: 00000000 c02fcbc4 c02fcb98 c07db2a8 00000000 c02fba98 c7907010 c079a8d4
[    1.366533] 1e80: c7907044 00000000 c0777258 c02fbc48 c079a8d4 c02fbbbc 00000000 c02fa454
[    1.374671] 1ea0: c782245c c78a9b14 c079a8d4 c788c960 c0799940 c02fb2cc c06b7ea8 c079a8d4
[    1.382809] 1ec0: c7840000 c079a8d4 c7840000 c0777258 00000000 c02fc03c 00000000 c074ffb0
[    1.390947] 1ee0: c7840000 c00088a4 00000000 c0567418 0000006d 00000000 00000001 c067fddc
[    1.399088] 1f00: 0000005f c056a1b0 c78a8280 c07cfa48 00000000 00000000 00000001 c7840000
[    1.407226] 1f20: 00000000 c0779b74 60000113 00000000 c070cbf0 c7ffc794 000000a7 c002c28c
[    1.415365] 1f40: c06c6d4c c070c180 00000006 00000006 c0779b3c c075b428 00000006 c075b408
[    1.423505] 1f60: c07adb00 000000a7 c0763398 c073a508 00000000 c073ac90 00000006 00000006
[    1.431644] 1f80: c073a508 c0031244 00000000 c055dcf4 00000000 00000000 00000000 00000000
[    1.439782] 1fa0: 00000000 c055dcfc 00000000 c00095d8 00000000 00000000 00000000 00000000
[    1.447920] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    1.456058] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[    1.464212] [<c0334988>] (sata_oxnas_set_mode) from [<c0334b58>] (sata_oxnas_post_reset_init+0x20/0x120)
[    1.473651] [<c0334b58>] (sata_oxnas_post_reset_init) from [<c0334d30>] (sata_oxnas_port_start+0xd8/0x12c)
[    1.483266] [<c0334d30>] (sata_oxnas_port_start) from [<c031e788>] (ata_host_start+0x108/0x1cc)
[    1.491929] [<c031e788>] (ata_host_start) from [<c0323de0>] (ata_host_activate+0x20/0xf8)
[    1.500078] [<c0323de0>] (ata_host_activate) from [<c0334084>] (sata_oxnas_probe+0x218/0x284)
[    1.508572] [<c0334084>] (sata_oxnas_probe) from [<c02fcbc4>] (platform_drv_probe+0x2c/0x5c)
[    1.516976] [<c02fcbc4>] (platform_drv_probe) from [<c02fba98>] (driver_probe_device+0xf8/0x21c)
[    1.525721] [<c02fba98>] (driver_probe_device) from [<c02fbc48>] (__driver_attach+0x8c/0x90)
[    1.534123] [<c02fbc48>] (__driver_attach) from [<c02fa454>] (bus_for_each_dev+0x54/0x88)
[    1.542266] [<c02fa454>] (bus_for_each_dev) from [<c02fb2cc>] (bus_add_driver+0xd8/0x1d0)
[    1.550410] [<c02fb2cc>] (bus_add_driver) from [<c02fc03c>] (driver_register+0x78/0xf4)
[    1.558382] [<c02fc03c>] (driver_register) from [<c00088a4>] (do_one_initcall+0x80/0x1c8)
[    1.566530] [<c00088a4>] (do_one_initcall) from [<c073ac90>] (kernel_init_freeable+0xfc/0x1cc)
[    1.575109] [<c073ac90>] (kernel_init_freeable) from [<c055dcfc>] (kernel_init+0x8/0xe4)
[    1.583165] [<c055dcfc>] (kernel_init) from [<c00095d8>] (ret_from_fork+0x14/0x3c)
[    1.590702] Code: e2422004 e3a04000 ee074f9a e5b20004 (e5830000) 
[    1.596823] ---[ end trace d074425de5fb06fc ]---
[    1.601454] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.601454] 
[    1.610549] CPU0: stopping
[    1.613255] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G      D        3.17.0-oxnas-tld-1 #1
[    1.621335] [<c000f4b0>] (unwind_backtrace) from [<c000baac>] (show_stack+0x10/0x14)
[    1.629048] [<c000baac>] (show_stack) from [<c056216c>] (dump_stack+0x74/0xd0)
[    1.636244] [<c056216c>] (dump_stack) from [<c000e4cc>] (handle_IPI+0x15c/0x190)
[    1.643612] [<c000e4cc>] (handle_IPI) from [<c0008564>] (gic_handle_irq+0x58/0x60)
[    1.651151] [<c0008564>] (gic_handle_irq) from [<c000c5a0>] (__irq_svc+0x40/0x74)
[    1.658593] Exception stack(0xc0767f70 to 0xc0767fb8)
[    1.663621] 7f60:                                     00000000 00000000 00000000 00000000
[    1.671764] 7f80: c0766000 00000000 c07746cc c056960c c07ad8ce 410fb025 c07ad8ce 00000000
[    1.679897] 7fa0: 00000000 c0767fb8 c000a130 c000a134 60000113 ffffffff
[    1.686487] [<c000c5a0>] (__irq_svc) from [<c000a134>] (arch_cpu_idle+0x28/0x30)
[    1.693854] [<c000a134>] (arch_cpu_idle) from [<c00426a8>] (cpu_startup_entry+0x104/0x170)
[    1.702085] [<c00426a8>] (cpu_startup_entry) from [<c073ab2c>] (start_kernel+0x320/0x388)
[    1.710228] [<c073ab2c>] (start_kernel) from [<6000806c>] (0x6000806c)
[    1.716728] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.716728] 

Rob,

This panic was due to the USB drive being messed up. Shutdown the Pogo V3 completely (unplug power cord too). Take this drive to another Linux box and run e2fsck to fix whatever problem it might have. And then cold start the Pogo V3 with it.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> This panic was due to the USB drive being messed
> up. Shutdown the Pogo V3 completely (unplug power
> cord too). Take this drive to another Linux box
> and run e2fsck to fix whatever problem it might
> have. And then cold start the Pogo V3 with it.

It doesn't help so I made a new USB Debian stick. But again the panic...
But there is something wrong with the wget statement. See below. The downloaded filename is wrong.
Maybe that corrupted my USB stick?
Tomorrow I will try it again with the old .dtb file, to see if there isn't any other problem.
Rob

root@raspberrypi:/tmp/usb/boot/dts# wget http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1
--2017-01-27 16:00:59--  http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1
Herleiden van forum.doozan.com (forum.doozan.com)... 50.116.34.13
Verbinding maken met forum.doozan.com (forum.doozan.com)|50.116.34.13|:80... verbonden.
HTTP-verzoek is verzonden; wachten op antwoord... 200 OK
Lengte: 7067 (6,9K) [application/octet-stream]
Wordt opgeslagen als: ‘file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1’

file.php?2,file=126 100%[=====================>]   6,90K  --.-KB/s   in 0,001s

2017-01-27 16:00:59 (4,52 MB/s) - '‘file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1’' opgeslagen [7067/7067]

If you want the wget command to create the file with the proper name, use:

wget -O ox820-pogoplug-pro.dtb http://forum.doozan.com/file.php?2,file=1264,filename=ox820-pogoplug-pro.dtb,download=1

-JT

Thanks JT!

and

@Rob, can you reformat that stick? or use a different one.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Thanks JT!
>
> and
>
> @Rob, can you reformat that stick? or use a
> different one.


I reformat the stick, added the Debian installation and the Pogoplug runs fine.
But...after I renamed the ox820 file to .old and downloaded the new one (with addition by JT), and reboot.... panic again.
So I don't know what happens every time. Maybe my stick has a problem, I will try an other one.

Rob

Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
> --------------------------------------------------
> -----
> > Thanks JT!
> >
> > and
> >
> > @Rob, can you reformat that stick? or use a
> > different one.
>
>
> I reformat the stick, added the Debian
> installation and the Pogoplug runs fine.
> But...after I renamed the ox820 file to .old and
> downloaded the new one (with addition by JT), and
> reboot.... panic again.
> So I don't know what happens every time. Maybe my
> stick has a problem, I will try an other one.
>
> Rob

bodhi,

I know what the problem is.... It's the new .dtb file. This is what I did:

I downloaded the new file as ox820-pogoplug-pro1.dtb. Rebooting, averything was working OK.
Then I changed in the uEnv.txt the ....-pro.dtb file to the ....-pro1.dtb file. Rebooting: and panic!
I changed it back to the original dtb file and the Pogoplug was running without problems.

I hope you can analyze what caused the problem.
Rob

Rob,

Let me take verify on my Pogo V3.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Rob,

The DTB boots fine in my Pogo V3.

Redownload it and check the md5. See if it is the same file.

cd /boot/dts
md5sum ox820-pogoplug-pro.dtb

1b4a4eab5eb94563e980c338cc1762ab  ox820-pogoplug-pro.dtb

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> The DTB boots fine in my Pogo V3.
>
> Redownload it and check the md5. See if it is the
> same file.
>

> cd /boot/dts
> md5sum ox820-pogoplug-pro.dtb
>

>

> 1b4a4eab5eb94563e980c338cc1762ab  ox820-pogoplug-p
> ro.dtb
>

bodhi,
it's the same file... Maybe an other installation issue or should I update to 3.18.5 kernal?

root@debian:~# cd /boot/dts
root@debian:/boot/dts# ls
.   ox820-pogoplug-classic.dtb  ox820-pogoplug-pro1.dtb
..  ox820-pogoplug-pro.dtb
root@debian:/boot/dts# md5sum ox820-pogoplug-pro1.dtb
1b4a4eab5eb94563e980c338cc1762ab  ox820-pogoplug-pro1.dtb
root@debian:/boot/dts#

Rob,

I forgot that you are still running 3.17 kernel. Yes, update the kernel to 4.4.38.

But backup your rootfs before doing that. Because it will be a massive change when you upgrade to jessie (the 3.17 rootfs is wheezy). If you rather not doing this then I will have to provide you with the DTB compiled on 3.17 to make things consistent.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 01/30/2017 01:43PM by bodhi.

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> I forgot that you are still running 3.17 kernel. Y
> es, update the kernel to 4.4.38.
>
> But backup your rootfs before doing that. Because
> it will be a massive change when you upgrade to je
> ssie (the 3.17 rootfs is wheezy). If you rather no
> t doing this then I will have to provide you with
> the DTB compiled on 3.17 to make things consistent
> .

bodhi,

OK, I will do that big step... ;-) But I'm still learning (!), so how do I make the back-up as you describe in step 1 of the kernel installation?
Thanks!
Rob

See the Wiki thread:
http://forum.doozan.com/read.php?2,23630

Quote

Backup

Backup/Restore rootfs using tar command

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> See the Wiki thread:
> http://forum.doozan.com/read.php?2,23630
>
>
>

Quote

Backup
>
> Backup/Restore rootfs using tar command

bodhi,

I have successfully installed kernel 4.4.38 and no panic with your .dtb file but no ethaddr update as well....

debian login: root

Password: 
Last login: Tue Jan 31 10:39:19 PST 2017 from 192.168.1.7 on pts/0
Linux debian 4.4.38-oxnas-tld-5 #1 SMP PREEMPT Sun Dec 11 17:32:48 PST 2016 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

root@debian:~# fw_setenv ethaddr 00:25:31:01:DE:8A
Can't overwrite "ethaddr"
root@debian:~# 

Rob,

Did you use the new DTB after upgraded?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> Did you use the new DTB after upgraded?

bodhi,

Yes I did and the Pogoplug is running fine with that new DTB file and the new kernel.

But I found that the problem of updating the ethaddr parameter is only with that specific parameter. There is no problem of deleting or add an other (fake) parameter.

I put the ethaddr in the /boot/uEnv.txt file and that was working. Now I see the right MAC address in my router.



Edited 1 time(s). Last edit at 02/01/2017 08:05AM by Roberto48.

Rob,


Thanks for the report! It is a good work around using uEnvt.txt.

I need to look at this closely in the future release.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
>
> Thanks for the report! It is a good work around us
> ing uEnvt.txt.
>
> I need to look at this closely in the future relea
> se.

bodhi, thank you for helping me to get an up-to-date working Pogoplug!

Rob

Roberto48 Wrote:
-------------------------------------------------------
> bodhi Wrote:
> --------------------------------------------------
> -----
> > Rob,
> >
> >
> > Thanks for the report! It is a good work around
> us
> > ing uEnvt.txt.
> >
> > I need to look at this closely in the future rel
> ea
> > se.
>
> bodhi, thank you for helping me to get an up-to-da
> te working Pogoplug!
>
> Rob

bodhi,

I found that I'm running wheezy and not jessie.... But the kernal is 4.4.38...
What did I wrong?

B.t.w. I'm playing around with the plug and now running Motion with an USB camera...

root@DebianPlug:/home# uname -r
4.4.38-oxnas-tld-5
root@DebianPlug:/home# lsb_release -da
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 7.11 (wheezy)
Release:        7.11
Codename:       wheezy

Rob,

The kernel is new and you can run with Debian jessie. Upgrading kernel alone does not make it jessie, you would have to change the /etc/apr/source.list and then upgrade Debian packages too. Debian jessie source will upgrade your system packages to the later versions that work with kernel 4.4.38. Before you do this, you must backup your rootfs, because it will be a massive change. If any thing goes wrong, just restore the backup rootfs.

To upgrade, edit your apt source list (adjust the locality in the 1st line to somewhere near your country region):

cat /etc/apt/sources.list

deb http://ftp.us.debian.org/debian jessie main
deb http://security.debian.org/ jessie/updates main contrib non-free

deb http://http.debian.net/debian jessie-updates main contrib
deb-src http://http.debian.net/debian jessie-updates main contrib

and then

apt-get update
apt-get upgrade

And after it is done, pay attention to the /boot folder changes (if any). If the initrd.image-4.4.38-oxnas-tld-5 file was regenerated, then you need to also regenerate the uInitrd manually.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> The kernel is new and you can run with Debian jess
> ie. Upgrading kernel alone does not make it jessie
> , you would have to change the /etc/apr/source.lis
> t and then upgrade Debian packages too. Debian jes
> sie source will upgrade your system packages to th
> e later versions that work with kernel 4.4.38. Bef
> ore you do this, you must backup your rootfs,
> because it will be a massive change. If any thi
> ng goes wrong, just restore the backup rootfs.
>
> To upgrade, edit your apt source list (adjust the
> locality in the 1st line to somewhere near your co
> untry region):
>
> cat /etc/apt/sources.list
>

> deb http://ftp.us.debian.org/debian jessie main
> deb http://security.debian.org/ jessie/updates mai
> n contrib non-free
> 
> deb http://http.debian.net/debian jessie-updates m
> ain contrib
> deb-src http://http.debian.net/debian jessie-updat
> es main contrib
>

> and then
>

> apt-get update
> apt-get upgrade
>

> And after it is done, pay attention to the /boot f
> older changes (if any). If the initrd.image-4.4.38
> -oxnas-tld-5 file was regenerated, then you need t
> o also regenerate the uInitrd manually.

OK bodhi, I did the upgrade and indeed the tld-5 file was regenerated, but how to regenerate the ulnitrd manuallly ?

update-initramfs: Generating /boot/initrd.img-4.4.38-oxnas-tld-5

Edited 1 time(s). Last edit at 02/06/2017 08:07AM by Roberto48.

Rob,

Look in the kernel and rootfs release thread:

http://forum.doozan.com/read.php?2,16044

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Rob,
>
> Look in the kernel and rootfs release thread:
>
> http://forum.doozan.com/read.php?2,16044

Hi bodhi,

Pogoplug is running fine now on jessie! Thanks again for your help.

Rob

root@DebianPlug:~# uname -r
4.4.38-oxnas-tld-5

root@DebianPlug:~# lsb_release -da
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 8.7 (jessie)
Release:        8.7
Codename:       jessie

Edited 1 time(s). Last edit at 02/06/2017 01:56PM by Roberto48.

Cool!

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)