Welcome! Log In Create A New Profile


Update MTDs?

Posted by youxiaojie 
Update MTDs?
February 27, 2017 01:52AM

the nandwrite and nanddump donot work under openwrt CC. So the openwrt 15.05 is not the best os for recovery but pretty good for general usage.I want to try lede next step.

is there the way to use tftp load firmware to memory and uboot command cp.b to update mtd partition as flash router?

root@OpenWrt:/mnt/sda1/nand# ./nandwrite
/bin/ash: ./nandwrite: not found
root@OpenWrt:/mnt/sda1/nand# ./nanddump
/bin/ash: ./nanddump: not found
root@OpenWrt:/mnt/sda1/nand# ls -l
-rwxr-xr-x 1 root root 1616492 Feb 27 2017 busybox
-rwxr-xr-x 1 root root 787036 Feb 27 2017 e2fsck
-rwxr-xr-x 1 root root 25632 Feb 27 2017 flash_erase
-rw-r--r-- 1 root root 329 Feb 27 2017 fw_env.config
-rwxr-xr-x 1 root root 668497 Feb 27 2017 fw_printenv
-rwxr-xr-x 1 root root 26548 Feb 27 2017 nanddump
-rwxr-xr-x 1 root root 29644 Feb 27 2017 nandwrite

Edited 3 time(s). Last edit at 02/27/2017 02:05AM by bodhi.
Re: Update MTDs?
February 28, 2017 03:29PM
Where did you get the nandwrite and nanddump that you are trying to use with OpenWrt CC? OpenWrt does have a nand-utils package available via opkg.

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.