Welcome! Log In Create A New Profile

Advanced

Tutorial of native sata boot for pogoplug pro

Posted by youxiaojie 
Re: Tutorial of native sata boot for pogoplug pro
March 23, 2018 09:11PM
Bodhi, I believe when I was messing around figuring it all out I may have attempted typing it in by error, I had put all the files in the usb so it may have just booted either one. kinda just glad it boots up every time:) I am now wondering if it is something I should fix,lol...Echowarrior108



followup on last question, what happened was I was was looking up different versions and made a backup copy, I then pasted the name into the backup file and when I was having trouble getting it all to work I sent the files to my laptop and ran everything else from there instead and must have copied the edited file. It is funny that it actually works. I guess my question now is should I try to upgrade to the newer version or edit the file name in u-boot?also here is a reboot with just the usb inserted it starts with this very well:

root@debian:~# reboot

Broadcast message from root@debian (ttyS0) (Fri Mar 23 23:48:00 2018):

INIT: Sending p[info] Using makefile-style concurrent boot in runlevel 6.
[....] Stopping busybox' klogd implementation: klogd1243 (klogd)
Stopped klogd (pid 1243).
. ok 
[ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[....] Stopping busybox' syslogd implementation: syslogd1244 (syslogd)
. ok 
[ ok ] Stopping NFS kernel daemon: mountd nfsd.
[ ok ] Unexporting directories for NFS kernel daemon....
[ ok ] Asking all remaining processes to terminate...done.
[ ok ] All processes ended within 1 seconds...done.
[ ok ] Stopping RPC port mapper daemon: rpcbind.
[ ok ] Stopping NFS common utilities: idmapd statd.
[....] Deconfiguring network interfaces...Removed stale PID file
Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:25:31:01:0c:d5
Sending on   LPF/eth0/00:25:31:01:0c:d5
Sending on   Socket/fallback
DHCPRELEASE on eth0 to 192.168.5.72 port 67
done.
[ ok ] Unmounting temporary filesystems...done.
[ ok ] Deactivating swap...done.
[  107.043120] EXT4-fs (sda1): re-mounted. Opts: (null)
[info] Will now restart.
[  109.184688] reboot: Restarting system

U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
  Boot device: NAND
Attempting to set PLLA to 850 MHz ...
  plla_ctrl0 : 0000020a
  plla_ctrl1 : 00330000
  plla_ctrl2 : 0065008b
  plla_ctrl3 : 000000f1

PLLA Set


U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820

DRAM:  128 MiB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete. done
Speed: 1000, full duplex
Using dwmac.40400000 device
host 192.168.5.72 is alive
Speed: 1000, full duplex
Using dwmac.40400000 device
host 192.168.5.72 is alive
Speed: 1000, full duplex
Using dwmac.40400000 device
host 192.168.5.72 is alive
Speed: 1000, full duplex
Using dwmac.40400000 device
host 192.168.5.72 is alive
Speed: 1000, full duplex
Using dwmac.40400000 device
host 192.168.5.72 is alive
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017
[    0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Pogoplug V3 Pro
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[    0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data)
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 116204K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14868K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0827e14   (8320 kB)
[    0.000000]       .init : 0xc0828000 - 0xc0860000   ( 224 kB)
[    0.000000]       .data : 0xc0860000 - 0xc08a8378   ( 289 kB)
[    0.000000]        .bss : 0xc08a8378 - 0xc08e6350   ( 248 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:160
[    0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[    0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[    0.000163] Console: colour dummy device 80x30
[    0.000197] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[    0.050017] pid_max: default: 32768 minimum: 301
[    0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051023] Initializing cgroup subsys net_cls
[    0.051105] CPU: Testing write buffer coherency: ok
[    0.051525] Setting up static identity map for 0x60008220 - 0x60008258
[    0.190133] Brought up 2 CPUs
[    0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[    0.190929] devtmpfs: initialized
[    0.196395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.196441] futex hash table entries: 512 (order: 2, 16384 bytes)
[    0.196743] prandom: seed boundary self test passed
[    0.201159] prandom: 100 self tests passed
[    0.201190] pinctrl core: initialized pinctrl subsystem
[    0.202022] NET: Registered protocol family 16
[    0.202585] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230018] cpuidle: using governor ladder
[    0.260008] cpuidle: using governor menu
[    0.265044] gpio-oxnas 44000000.gpio: at address c8848000
[    0.265431] gpio-oxnas 44100000.gpio: at address c884a000
[    0.265994] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[    0.388838] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[    0.388917] oxnas-pcie 47c00000.pcie-controller: link up
[    0.389248] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[    0.389273] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[    0.389294] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[    0.389309] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    0.389329] pci_bus 0000:00: root bus resource [bus 00-7f]
[    0.389882] PCI: bus0: Fast back to back transfers disabled
[    0.390033] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[    0.390502] vgaarb: loaded
[    0.390986] SCSI subsystem initialized
[    0.391841] usbcore: registered new interface driver usbfs
[    0.391943] usbcore: registered new interface driver hub
[    0.392094] usbcore: registered new device driver usb
[    0.392304] pps_core: LinuxPPS API ver. 1 registered
[    0.392320] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392363] PTP clock support registered
[    0.394496] clocksource: Switched to clocksource rps_clocksource_timer
[    0.413273] NET: Registered protocol family 2
[    0.414156] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.414197] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.414231] TCP: Hash tables configured (established 1024 bind 1024)
[    0.414328] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.414371] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.414635] NET: Registered protocol family 1
[    0.415175] RPC: Registered named UNIX socket transport module.
[    0.415198] RPC: Registered udp transport module.
[    0.415208] RPC: Registered tcp transport module.
[    0.415221] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.415633] Unpacking initramfs...
[    0.891537] Freeing initrd memory: 4488K (c79c5000 - c7e27000)
[    0.893040] Initialise system trusted keyring
[    0.922828] zbud: loaded
[    0.941350] NFS: Registering the id_resolver key type
[    0.941422] Key type id_resolver registered
[    0.941434] Key type id_legacy registered
[    0.941475] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.941498] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.942430] fuse init (API version 7.23)
[    0.944448] Key type big_key registered
[    1.032890] Key type asymmetric registered
[    1.032924] Asymmetric key parser 'x509' registered
[    1.033057] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.033085] io scheduler noop registered
[    1.033103] io scheduler deadline registered
[    1.033164] io scheduler cfq registered (default)
[    1.033825] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    1.035376] console [ttyS0] disabled
[    1.035473] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[    1.618416] console [ttyS0] enabled
[    1.633182] loop: module loaded
[    1.638341] scsi host0: sata_oxnas
[    1.642224] ata1: SATA max UDMA/133 irq 7
[    1.646310] sata_oxnas: resetting SATA core
[    1.647342] nand: Could not find valid ONFI parameter page; aborting
[    1.647383] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[    1.647390] nand: Hynix NAND 128MiB 3,3V 8-bit
[    1.647400] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.647416] Scanning device for bad blocks
[    1.667496] Bad eraseblock 249 at 0x000001f20000
[    1.729712] 2 cmdlinepart partitions found on MTD device 41000000.nand
[    1.736227] Creating 2 MTD partitions on "41000000.nand":
[    1.741639] 0x000000000000-0x000000e00000 : "boot"
[    1.748321] 0x000000e00000-0x000008000000 : "data"
[    1.755571] oxnas-gmac 40400000.ethernet: no reset control found
[    1.761594] stmmac - user ID: 0x12, Synopsys ID: 0x35
[    1.766615]  Ring mode enabled
[    1.769651]  DMA HW capability register supported
[    1.774169]  Enhanced/Alternate descriptors
[    1.778501] 	Enabled extended descriptors
[    1.782520]  RX Checksum Offload Engine supported (type 2)
[    1.787973]  TX Checksum insertion supported
[    1.792235]  Wake-Up On Lan supported
[    1.795875]  Enable RX Mitigation via HW Watchdog Timer
[    1.816253] libphy: stmmac: probed
[    1.819648] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[    1.826112] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[    1.832796] PPP generic driver version 2.4.2
[    1.837473] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142)
[    1.843847] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[    1.855032] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[    1.864168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.870725] ehci-pci: EHCI PCI platform driver
[    1.875525] oxnas-ehci 40200100.ehci: EHCI Host Controller
[    1.881077] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[    1.888872] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[    1.910141] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[    1.916439] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.923238] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.930447] usb usb1: Product: EHCI Host Controller
[    1.935306] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd
[    1.941731] usb usb1: SerialNumber: 40200100.ehci
[    1.947415] hub 1-0:1.0: USB hub found
[    1.951275] hub 1-0:1.0: 2 ports detected
[    1.956387] usbcore: registered new interface driver cdc_acm
[    1.962063] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.970178] usbcore: registered new interface driver cdc_wdm
[    1.975984] usbcore: registered new interface driver usb-storage
[    1.982205] usbcore: registered new interface driver usbserial
[    1.988080] usbcore: registered new interface driver usbserial_generic
[    1.994688] usbserial: USB Serial support registered for generic
[    2.001146] mousedev: PS/2 mouse device common for all mice
[    2.006881] i2c /dev entries driver
[    2.011845] hidraw: raw HID events driver (C) Jiri Kosina
[    2.017484] usbcore: registered new interface driver usbhid
[    2.023068] usbhid: USB HID core driver
[    2.028907] NET: Registered protocol family 10
[    2.034923] sit: IPv6 over IPv4 tunneling driver
[    2.040048] ata1: SATA link down (SStatus 0 SControl 310)
[    2.040655] NET: Registered protocol family 17
[    2.040842] Key type dns_resolver registered
[    2.042155] registered taskstats version 1
[    2.042201] Loading compiled-in X.509 certificates
[    2.042324] zswap: loaded using pool lzo/zbud
[    2.074147] Key type encrypted registered
[    2.081461] Freeing unused kernel memory: 224K (c0828000 - c0860000)
Loading, please wait...
starting version 232
[    2.263557] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.274880] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.276154] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.278433] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.278604] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.279682] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.280204] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[    2.281006] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.285160] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.286136] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.287093] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[    2.432033] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.438714] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.460190] usb 1-1: Product: USB2.0 Hub
[    2.470661] hub 1-1:1.0: USB hub found
[    2.474859] hub 1-1:1.0: 4 ports detected
[    2.599805] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0
[    2.770278] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci
[    2.892080] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530
[    2.898969] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.913512] usb 1-1.3: Product: Cruzer
Begin: Loading e[    2.925209] usb 1-1.3: Manufacturer: SanDisk
ssential drivers[    2.930560] usb 1-1.3: SerialNumber: 20053248121181F0AC47
 ... done.
[    2.939584] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    2.970393] scsi host1: usb-storage 1-1.3:1.0
[    2.983413] usbcore: registered new interface driver uas
[    3.971397] scsi 1:0:0:0: Direct-Access     SanDisk  Cruzer           1.20 PQ: 0 ANSI: 5
[    3.987402] sd 1:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    3.997020] sd 1:0:0:0: [sda] Write Protect is off
[    4.003013] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.022474]  sda: sda1
[    4.031298] sd 1:0:0:0: [sda] Attached SCSI removable disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 
rootfs: clean, 17933/488640 files, 192152/1953792 blocks
done.
[   13.272248] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
. ok 
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[   17.345896] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[   18.676275] random: nonblocking pool is initialized
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:25:31:01:0c:d5
Sending on   LPF/eth0/00:25:31:01:0c:d5
Sending on   Socket/fallback
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
[   27.000161] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
DHCPOFFER of 192.168.5.97 from 192.168.5.72
DHCPACK of 192.168.5.97 from 192.168.5.72
bound to 192.168.5.97 -- renewal in 19365 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1241 (syslogd)
. ok 
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting system message bus: dbus.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1240 (klogd)
. ok 
[ ok ] Starting NTP server: ntpd.

Debian GNU/Linux 9 debian ttyS0

debian login: root
Password: 
Last login: Fri Mar 23 23:47:48 EDT 2018 on ttyS0
Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#


thanks,
EW108



Edited 2 time(s). Last edit at 03/23/2018 09:52PM by echowarrior108.
Re: Tutorial of native sata boot for pogoplug pro
March 23, 2018 10:02PM
echowarrior108,

Dont worry about it. That was just a name for the image. What actually inside the image is what count! That name could be anything you want it to be.

The images were from kernel 4.4.54- oxnas-tld-1. So the kernel identification after it is running is always going to be 4.4.54-oxnas-tld-1.

After you have running this rootfs for a while, and then decide to upgrade the the latest kernel to the new version I release, that will be corrected at that time.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Tutorial of native sata boot for pogoplug pro
March 23, 2018 10:39PM
Bodhi, thanks this is huge earning experience and I have a great backup in case I mess it up too bad!:) I can't wait to make this more functional:)

Echowarrior108
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: