Welcome! Log In Create A New Profile

Advanced

Clonning or reuse rootfs for a different Kirkwood box

Posted by bodhi 
Clonning or reuse rootfs for a different Kirkwood box
March 31, 2017 03:44AM
joerg_999,

I did so many times, perhaps it was not enough :)

The rootfs has the correct settings the first time you extracted to the disk. But after you have booted with it at least once, in some cases, the settings was overwritten by udev. So always check those 2 files when you clone it, or use it to boot other boxes.

Furthermore, you actually need to deal with 2 files, not one. See my previous post:

http://forum.doozan.com/read.php?2,13053,13070#msg-13070

-bodhi
===========================
Wiki
latest Kirkwood kernel builds and rootfs
latest u-boot-kirkwood builds
latest Oxnas kernel builds and rootfs
latest u-boot-oxnas builds
latest MVEBU Armada kernel builds and rootfs
U-Boot & Kernel Booting process
bodhi's u-boot GitHub
bodhi's corner



Edited 3 time(s). Last edit at 04/02/2017 02:59PM by bodhi.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: