Welcome! Log In Create A New Profile

Advanced

HP T5325 with bad flash - what to do?

Posted by kalehrl 
Forum List Message List New Topic
bodhi
Re: HP T5325 with bad flash - what to do?
September 19, 2017 07:53AM 
[....] Configuring network interfaces...[   30.158663] Unable to handle kernel paging request at virtual address 6961775e

So close :) this is bad, because with 256M, the paging error occured (even though the kernel could not print out the whole log before hanging, it is most likely the RAM error),

So I guess you should go down to 128M and then go up if 128M is successful.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
kalehrl
Re: HP T5325 with bad flash - what to do?
September 21, 2017 01:21PM
I've decided to trash the faulty unit.
It's no use trying to make it work since RAM is bas so you never know when it may freeze.
I guess all parts are soldered to the motherboard so I can't salvage anything for spare parts?
Reply Quote
bodhi
Re: HP T5325 with bad flash - what to do?
September 21, 2017 05:38PM
kalehrl,

Too bad! and right, looks like you can only keep the power supply (this one is very handy). Everything is soldered.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
kalehrl
Re: HP T5325 with bad flash - what to do?
September 22, 2017 01:55PM
Thank you very much for your kind support, bodhi.
Reply Quote
Page 3 of 3    Pages: Previous123
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: