Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's October 01, 2017 01:50PM |
Admin Registered: 13 years ago Posts: 18,555 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's October 09, 2017 01:59PM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's October 14, 2017 03:15PM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 11, 2017 04:29AM |
Admin Registered: 13 years ago Posts: 18,555 |
dmesg mount fw_printenv e2label /dev/sda1 e2label /dev/sdb1 ls -lart /media/sdb1 ls -lart /media/sdb1/boot
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 12, 2017 09:11AM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 12, 2017 04:30PM |
Admin Registered: 13 years ago Posts: 18,555 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 19, 2017 03:42AM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 19, 2017 04:20AM |
Admin Registered: 13 years ago Posts: 18,555 |
./kwboot -t -B 115200 /dev/ttyUSB0 -d
printenv boot
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 19, 2017 05:52AM |
Admin Registered: 13 years ago Posts: 18,555 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 19, 2017 06:04AM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 21, 2017 01:45PM |
Registered: 6 years ago Posts: 23 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-svn48023 (Oct 13 2015 - 09:25:56) Marvell version: 2014_T3.0p6
pi@raspberrypi:~/Downloads $ sudo ./kwboot -t -B 115200 /dev/ttyUSB1 -d Sending debug message. Please reboot the target...- [Type Ctrl-\ + c to quit] M - 1.73 Booting from NAND flash General initialization - Version: 1.0.0 Detected Device ID 6810 High speed PHY - Version: 2.0 Init RD NAS topology board SerDes lanes topology details: | Lane # | Speed | Type | -------------------------------- | 0 | 06 | SATA0 | | 1 | 05 | USB3 HOST0 | | 2 | 06 | SATA1 | | 5 | 05 | USB3 HOST1 | -------------------------------- High speed PHY - Ended Successfully DDR3 Training Sequence - Ver TIP-1.26.0 mvSysEnvGetTopologyUpdateInfo: TWSI Read failed DDR3 Training Sequence - Switching XBAR Window to FastPath Window DDR3 Training Sequence - Ended Successfully Not detected suspend to RAM indication BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-svn48023 (Oct 13 2015 - 09:25:56) Marvell version: 2014_T3.0p6 Board: RD-NAS-88F6820-DDR3 SoC: MV88F6810 Rev A0 running 1 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1332 [MHz] L2 @ 666 [MHz] TClock @ 250 [MHz] DDR @ 666 [MHz] DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 512 MiB Map: Code: 0x1fed0000:0x1ff95d60 BSS: 0x1ffef2b4 Stack: 0x1f9cff20 Heap: 0x1f9d0000:0x1fed0000 U-Boot Environment: 0x00200000:0x00280000 (NAND) NAND: 256 MiB MMC: mv_sdh: 0 *** Booting kernel from kernel 1 @0x00000000; run bootcmd_custom; *** USB2.0 0: Host Mode USB3.0 0: Host Mode USB3.0 1: Host Mode Board configuration detected: Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x01 | egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> printenv CASset=max CONTRY_TYPE=FF FEATURE_BIT=00 MALLOC_len=5 MODEL_ID=B303 MPmode=SMP PRODUCT_NAME=STG-328 VENDOR_NAME=MitraStar Technology Corp. autoload=no baudrate=115200 boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=armada-nand:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2) earlyprintk=serial bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=nand read 0x2000000 0x00000000; run bootcmd_custom; 0xF00000 && bootz 0x2000000 bootcmd_auto=stage_boot $boot_order bootcmd_custom=if run bootcmd_exec; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; reset; fi; fi bootcmd_custom_sata=if run sata_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; reset; fi; fi bootcmd_exec=run scan_disk; echo Booting from $bootdev $device ...; setenv fdt_skip_update yes; if run load_image; then if run load_dtb; then if run load_initrd; then run set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr; fi; fi; fi bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000; bootcmd_stock_1=run set_bootargs_stock; echo Booting from NAND kernel 1 ...; nand read 0x2000000 0x00E00000 0xF00000 && bootz 0x2000000 bootcmd_stock_2=run set_bootargs_stock; echo Booting from NAND kernel 2 ...; nand read 0x2000000 0x08700000 0xF00000 && bootz 0x2000000 bootdelay=3 cacheShare=no change_boot_part=1 console=console=ttyS0,115200 core_checksum_1=e9b3248e8c69ec9ef52a8698d0835aae core_checksum_2=2773b03df8b32c243f8b84dcefa79efb curr_bootfrom=1 device_partition=0:1 devices=usb scsi disaMvPnp=no disks=0 1 2 3 dtb_file=/boot/dts/armada-380-zyxel-nas326.dtb eeeEnable=no enaClockGating=no enaCpuStream=no enaFPU=yes enaMonExt=no enaWrAllo=no eth1addr=00:50:43:38:32:25 eth1mtu=1500 eth2addr=00:50:43:38:a6:25 eth2mtu=1500 eth3addr=00:50:43:32:a6:38 eth3mtu=1500 ethact=egiga0 ethaddr=58:8B:F3:DB:DD:3E ethmtu=1500 ethprime=egiga0 fdt_addr=2040000 fdt_skip_update=yes fdtaddr=0x1000000 fdtfile=armada-38x-modular.dtb filesize=0x6e8f80 fwversion_1=V5.21(AAZF.0) fwversion_2=V5.21(AAZF.1) ide_path=/ image_name=uImage img_checksum_1=db4be927b09d7ea9a1284d2e6f330db5 img_checksum_2=5356a1c083dfd6bc8c74bfd231aa15a6 initrd_name=uInitrd ipaddr=10.4.50.170 kernel_addr=${kernel_addr_1} kernel_addr_1=0x00000000; run bootcmd_custom; kernel_addr_2=0x08700000 kernel_addr_r=2080000 kernel_mtd_1=3 kernel_mtd_2=5 lcd0_enable=0 lcd0_params=640x480-16@60 lcd_panel=0 load_dtb=echo loading DTB $dtb_file ...; ext2load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1000000 load_image=echo loading Image ...; ext2load $bootdev $device $load_image_addr /boot/zImage load_image_addr=0x02000000 load_initrd=echo loading uInitrd ...; ext2load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x2900000 loadaddr=0x02000000 loads_echo=0 modelid_1=B303 modelid_2=B303 mtdids=nand0=armada-nand mtdparts=mtdparts=armada-nand:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2) mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500 mv_pon_addr=00:50:43:25:a6:38 nandEcc=nfcConfig=4bitecc netbsd_en=no netmask=255.255.255.0 netretry=no next_bootfrom=1 pcieTune=no pexMode=RC pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 ramdisk_addr_r=2880000 revision_1=50967 revision_2=50984 romfile_checksum_1=4EE9 romfile_checksum_2=A762 rootpath=/srv/nfs/ sata_bootcmd=echo Booting from SATA ...; setenv fdt_skip_update yes; run sata_init; ext2load scsi 0:1 $load_image_addr /boot/zImage; ext2load scsi 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load scsi 0:1 $load_initrd_addr /boot/uInitrd; run sata_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr sata_delay_reset=0 sata_dma_mode=yes sata_init=mw.l f1018100 20420000; mw.l f1018140 003ca800; sleep 3; scsi init sata_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial" scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "run usb_init"; setenv scan_scsi "run sata_init"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if ext2load $dev $disknum:1 $load_image_addr /boot/zImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done script_addr_r=3000000 script_name=boot.scr scsidevs=0 serial_number=S150Y46042395 serverip=10.4.50.38 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial set_bootargs_stock=setenv bootargs "console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw rootdelay=2" standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; stderr=serial stdin=serial stdout=serial sysimg_mtd_1=4 sysimg_mtd_2=6 usb0Mode=host usbActive=0 usbType=2 usb_bootcmd=echo Booting from USB ...; setenv fdt_skip_update yes; run usb_init; ext2load usb 0:1 $load_image_addr /boot/zImage; ext2load usb 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load usb 0:1 $load_initrd_addr /boot/uInitrd; run usb_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr usb_init=mw.l f1018100 20420000; mw.l f1018140 003E8800; sleep 3; usb start usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts earlyprintk=serial" vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 zld_checksum_1=b44f1fe16e53092068270b337dee223c zld_checksum_2=102d2dc16f397df0dddc4f1ad6380e52 Environment size: 7101/524284 bytes Marvell>> boot NAND read: device 0 whole chip Attempt to read outside the flash area 0 bytes read: ERROR running scan_disk ... Scan device usb (Re)start USB... USB0: Port (usbActive) : 0 Interface (usbType = 2) : USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 0 Ethernet Device(s) found device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device scsi AHCI init for unit0 Target spinup took 0 ms. Target spinup took 0 ms. Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found scanning bus for devices...
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 21, 2017 04:19PM |
Admin Registered: 13 years ago Posts: 18,555 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 21, 2017 06:22PM |
Admin Registered: 13 years ago Posts: 18,555 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 22, 2017 12:57PM |
Registered: 6 years ago Posts: 23 |
Re: Problem booting Debian-4.9.0-mvebu-tld-12 with 2 hdd's November 22, 2017 04:27PM |
Admin Registered: 13 years ago Posts: 18,555 |