Welcome! Log In Create A New Profile

Advanced

NAS Iconbit I-STOR IS608 with Linux Kernel 4.4.89 Oxnas (OX820)

Posted by sakatgg 
NAS Iconbit I-STOR IS608 with Linux Kernel 4.4.89 Oxnas (OX820)
January 31, 2018 02:53PM
There was a version (NAS Iconbit I-STOR IS608). Previous messages here
root @ debian: ~ # cat /proc/version
Linux version 4.1.0-oxnas-tld-1 (root @ tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10)) # 3 SMP PREEMPT Wed Jul 1 05:11:47 PDT 2015
Installed from the first page linux-4.4.89-oxnas-tld-1.bodhi.tar.bz2
root@debian:~# cat /proc/version
Linux version 4.4.89-oxnas-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP PREEMPT Wed Oct 4 22:22:09 PDT 2017
WiFi usb are defined
TEW-684UB

[  127.520281] usb 1-2: new high-speed USB device number 2 using oxnas-ehci
[  127.686799] usb 1-2: New USB device found, idVendor=148f, idProduct=3573
[  127.693529] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  127.700712] usb 1-2: Product: 802.11 n WLAN
[  127.705100] usb 1-2: Manufacturer: Ralink
[  127.709102] usb 1-2: SerialNumber: 1.0
[  127.990028] usb 1-2: reset high-speed USB device number 2 using oxnas-ehci
[  128.149688] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3593, rev 0402 detected
[  128.186296] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000d detected
[  128.198382] usbcore: registered new interface driver rt2800usb

DWA-140 rev B2

[  235.971694] usb 1-2: USB disconnect, device number 2
[  254.000053] usb 1-2: new high-speed USB device number 3 using oxnas-ehci
[  254.166174] usb 1-2: New USB device found, idVendor=07d1, idProduct=3c0a
[  254.172904] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  254.180096] usb 1-2: Product: 11n Adapter
[  254.184094] usb 1-2: Manufacturer: Ralink
[  254.188085] usb 1-2: SerialNumber: 1.0
[  254.320058] usb 1-2: reset high-speed USB device number 3 using oxnas-ehci
[  254.479685] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3071, rev 0213 detected
[  254.516418] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0008 detected

TEW-664-UB

[  316.629611] usb 1-2: USB disconnect, device number 3
[  325.350074] usb 1-2: new high-speed USB device number 4 using oxnas-ehci
[  325.518046] usb 1-2: New USB device found, idVendor=148f, idProduct=2870
[  325.524779] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  325.531962] usb 1-2: Product: 802.11 n WLAN
[  325.536135] usb 1-2: Manufacturer: Ralink
[  325.540160] usb 1-2: SerialNumber: 1.0
[  325.670077] usb 1-2: reset high-speed USB device number 4 using oxnas-ehci
[  325.831057] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[  325.893309] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0002 detected

DWA -131

[  417.880094] usb 1-2: new high-speed USB device number 6 using oxnas-ehci
[  418.032921] usb 1-2: New USB device found, idVendor=07d1, idProduct=3303
[  418.039603] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  418.046789] usb 1-2: Product: 11n Adapter
[  418.050816] usb 1-2: Manufacturer: Manufacturer Realtek
[  418.056104] usb 1-2: SerialNumber: 00e04c000001

DWA -131 no line ieee80211 phy......, no wlan0

Question: How to raise wlan interface and what other packages do I need to install? Thank you
root@debian:~#  ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT qlen 1000
    link/ether 74:f0:6d:6a:1d:17 brd ff:ff:ff:ff:ff:ff
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT qlen 1
    link/sit 0.0.0.0 brd 0.0.0.0
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
    link/ether f0:7d:68:71:18:34 brd ff:ff:ff:ff:ff:ff
root@debian:~# ip link set wlan0 up
[  357.880258] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  357.909102] rt2800usb 1-2:1.0: Direct firmware load for rt2870.bin failed with error -2
[  357.917201] ieee80211 phy0: rt2x00lib_request_firmware: Error - Failed to request Firmware
RTNETLINK answers: No such file or directory
root@debian:~# dmesg | grep firmware
[  357.880258] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  357.909102] rt2800usb 1-2:1.0: Direct firmware load for rt2870.bin failed with error -2
[  357.917201] ieee80211 phy0: rt2x00lib_request_firmware: Error - Failed to request Firmware

P.S. Took from debian8 and inserted /lib/firmware/4.4.89-oxnas-tld-1/rt2870.bin

root@debian:~# ip link set wlan0 up
[   67.000051] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   67.031656] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[   67.447644] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
root@debian:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 74:f0:6d:6a:1d:17
          inet addr:192.168.3.179  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::76f0:6dff:fe6a:1d17/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:22 errors:0 dropped:0 overruns:0 frame:0
          TX packets:75 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2339 (2.2 KiB)  TX bytes:10172 (9.9 KiB)
          Interrupt:8 Base address:0xc000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr ff:ff:ff:ff:ff:ff
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)



Edited 17 time(s). Last edit at 02/03/2018 05:50PM by sakatgg.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: