Restore Goflex Net back to orignal

I have a goflex net running debian, this was installed using Jeff's script and I have net console configured.
Does anyone know how i can restore this to factory settings, i am wanting to give this to a family member to use with the standard segate software as i no longer need it.

Will this work:

http://jeff.doozan.com/debian/uboot/

Quote
Old: Restore old uBoot on mtd0 This section is for reference only.

You should not run this unless you have a very good reason.
If, for some reason, you want to revert back to the original bootloader, you can use the following instructions to restore the original bootloader:

# Restore original uBoot
wget [url]http://jeff.doozan.com/debian/uboot/files/uboot/uboot.mtd0.dockstar.original.kwb[/url]
flash_erase /dev/mtd0 0 4
nandwrite /dev/mtd0 uboot.mtd0.dockstar.original.kwb

From my understanding when you run Jeff's script it just installs a new uboot and loads debian on to the flash drive, but leaves the existing segate software where it is. can anyone confirm this?

So if I follow the instructions above it should revert my Goflex Net back to how it originally was. Has anyone got any experience from doing this?

How do I restore my goflexnet to original firmw
are

Look there: http://forum.doozan.com/read.php?3,12506