Welcome! Log In Create A New Profile

Advanced

Fusion/freeswitch on debian

Posted by asterix 
Fusion/freeswitch on debian
June 05, 2018 11:49PM
Arm-device could be IP PBX, very easy to install both freepbx(asterisk) and fusionpbx (freeswitch) on debian, Just follow official tutorial

512MB memory at least, 1GB recommended. it's better to install plain asterisk or freeswitch if memory less than 512MB, but need more time to configure/debug.

Fusionpbx(Freeswitch): https://www.fusionpbx.com/download.php

Install Script

Debian Install

Debian 8 is currently the recommended operating system by the FreeSWITCH developers. Start with a minimal install of Debian 8. You can download it from here. Then run the following commands as 'root'.

wget -O - https://raw.githubusercontent.com/fusionpbx/fusionpbx-install.sh/master/debian/pre-install.sh | sh;
cd /usr/src/fusionpbx-install.sh/debian && ./install.sh

Note: If using Debian Jessie on Proxmox LXC containers please run the following BEFORE starting the FusionPBX install.

apt-get update && apt-get upgrade
apt-get install systemd
apt-get install systemd-sysv
apt-get install ca-certificates
reboot


Freepbx(asterisk):

freepbx 13 on debian 8.1: https://wiki.freepbx.org/display/FOP/Installing+FreePBX+13+on+Debian+8.1

freepbx 14 on debian 8.8: https://wiki.freepbx.org/display/FOP/Installing+FreePBX+14+on+Debian+8.8
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: