|
manti
Debian-4.18.4-kirkwood-tld-1-rootfs-bodhi - NSA325v2 September 18, 2018 09:47AM |
Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.18.4-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Fri Aug 24 22:13:40 PDT 201 8 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ZyXEL NSA325 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4e8 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 506308K/524288K available (8192K kernel code, 799K rwdata , 2148K rodata, 1024K init, 279K bss, 17980K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 800 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 280 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.000039] Switching to timer-based delay loop, resolution 5ns [ 0.000509] Console: colour dummy device 80x30 [ 0.000544] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000565] pid_max: default: 32768 minimum: 301 [ 0.000835] Security Framework initialized [ 0.000961] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000980] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001915] CPU: Testing write buffer coherency: ok [ 0.003194] Setting up static identity map for 0x100000 - 0x100058 [ 0.003440] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1 [ 0.003654] Hierarchical SRCU implementation. [ 0.006369] devtmpfs: initialized [ 0.010693] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.010719] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.010987] prandom: seed boundary self test passed [ 0.014127] prandom: 100 self tests passed [ 0.014138] pinctrl core: initialized pinctrl subsystem [ 0.015250] NET: Registered protocol family 16 [ 0.015551] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.016154] audit: initializing netlink subsys (disabled) [ 0.016444] audit: type=2000 audit(0.010:1): state=initialized audit_enabled= 0 res=1 [ 0.017466] cpuidle: using governor ladder [ 0.017552] cpuidle: using governor menu [ 0.017887] Feroceon L2: Enabling L2 [ 0.017926] Feroceon L2: Cache support initialised. [ 0.018227] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet 0-port@0: local-mac-address is not set [ 0.022222] No ATAGs? [ 0.028717] vgaarb: loaded [ 0.029002] SCSI subsystem initialized [ 0.029356] usbcore: registered new interface driver usbfs [ 0.029402] usbcore: registered new interface driver hub [ 0.029446] usbcore: registered new device driver usb [ 0.029559] pps_core: LinuxPPS API ver. 1 registered [ 0.029567] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 0.029587] PTP clock support registered [ 0.030374] clocksource: Switched to clocksource orion_clocksource [ 0.114053] VFS: Disk quotas dquot_6.6.0 [ 0.114130] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.121224] NET: Registered protocol family 2 [ 0.121834] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.121862] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.121915] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.121967] TCP: Hash tables configured (established 4096 bind 4096) [ 0.122037] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.122060] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.122213] NET: Registered protocol family 1 [ 0.122716] RPC: Registered named UNIX socket transport module. [ 0.122726] RPC: Registered udp transport module. [ 0.122733] RPC: Registered tcp transport module. [ 0.122738] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.122993] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.123843] Initialise system trusted keyrings [ 0.123886] Key type blacklist registered [ 0.124051] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.124131] zbud: loaded [ 0.124885] NFS: Registering the id_resolver key type [ 0.124909] Key type id_resolver registered [ 0.124916] Key type id_legacy registered [ 0.124932] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.124940] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.125179] jffs2: version 2.2. (NAND) (SUMMARY) Š 2001-2006 Red Hat, Inc. [ 0.125343] fuse init (API version 7.27) [ 0.125638] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.125789] orangefs_init: module version upstream loaded [ 0.125798] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 2.550379] random: fast init done [ 4.540924] Key type asymmetric registered [ 4.540939] Asymmetric key parser 'x509' registered [ 4.541001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 47) [ 4.541013] io scheduler noop registered [ 4.541020] io scheduler deadline registered [ 4.541104] io scheduler cfq registered (default) [ 4.542172] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 4.543702] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 00:00 [ 4.543721] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 4.543732] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 4.543743] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.545054] PCI: bus0: Fast back to back transfers disabled [ 4.545075] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 4.571493] PCI: bus1: Fast back to back transfers disabled [ 4.571555] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 4.571572] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bi t] [ 4.571594] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.571608] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 4.571700] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 4.571766] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 4.572216] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.630996] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.631203] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.690987] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.691372] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.692392] console [ttyS0] disabled [ 4.692453] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 5.397278] console [ttyS0] enabled [ 5.406176] loop: module loaded [ 5.409789] sata_mv f1080000.sata: slots 32 ports 2 [ 5.416720] scsi host0: sata_mv [ 5.420234] scsi host1: sata_mv [ 5.423586] ata1: SATA max UDMA/133 irq 32 [ 5.427698] ata2: SATA max UDMA/133 irq 32 [ 5.432499] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1 [ 5.438961] nand: Eon NAND 128MiB 3,3V 8-bit [ 5.443273] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 5.450897] Scanning device for bad blocks [ 5.459852] Bad eraseblock 100 at 0x000000c80000 [ 5.469290] Bad eraseblock 200 at 0x000001900000 [ 5.513383] 9 fixed-partitions partitions found on MTD device orion_nand [ 5.520111] Creating 9 MTD partitions on "orion_nand": [ 5.525288] 0x000000000000-0x000000100000 : "uboot" [ 5.530981] 0x000000100000-0x000000180000 : "uboot_env" [ 5.536918] 0x000000180000-0x000000200000 : "key_store" [ 5.542882] 0x000000200000-0x000000280000 : "info" [ 5.548367] 0x000000280000-0x000000c80000 : "etc" [ 5.553868] 0x000000c80000-0x000001680000 : "kernel_1" [ 5.559755] 0x000001680000-0x000004640000 : "rootfs1" [ 5.565807] 0x000004640000-0x000005040000 : "kernel_2" [ 5.571720] 0x000005040000-0x000008000000 : "rootfs2" [ 5.578531] libphy: Fixed MDIO Bus: probed [ 5.583259] libphy: orion_mdio_bus: probed [ 5.588201] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.690830] mv643xx_eth: Set the PHY to fix link down [ 5.691387] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 5c:f4:ab:48:f2:b9 [ 5.705352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.711964] ehci-pci: EHCI PCI platform driver [ 5.716468] ehci-orion: EHCI orion driver [ 5.720691] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.726249] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 5.734108] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 5.760393] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.766453] ata1: SATA link down (SStatus 0 SControl F300) [ 5.772189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 4.18 [ 5.780566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.787818] usb usb1: Product: EHCI Host Controller [ 5.792839] usb usb1: Manufacturer: Linux 4.18.4-kirkwood-tld-1 ehci_hcd [ 5.799597] usb usb1: SerialNumber: f1050000.ehci [ 5.804824] hub 1-0:1.0: USB hub found [ 5.808617] hub 1-0:1.0: 1 port detected [ 5.813209] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.818475] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 5.826238] xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 qui rks 0x0000000000000004 [ 5.835768] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 4.18 [ 5.844098] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.851367] usb usb2: Product: xHCI Host Controller [ 5.856269] usb usb2: Manufacturer: Linux 4.18.4-kirkwood-tld-1 xhci-hcd [ 5.863015] usb usb2: SerialNumber: 0000:01:00.0 [ 5.868073] hub 2-0:1.0: USB hub found [ 5.871921] hub 2-0:1.0: 2 ports detected [ 5.876358] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 5.881668] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 3 [ 5.889110] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 5.895595] usb usb3: We don't know the algorithms for LPM for this host, dis abling LPM. [ 5.903851] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 4.18 [ 5.912168] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.919420] usb usb3: Product: xHCI Host Controller [ 5.924414] usb usb3: Manufacturer: Linux 4.18.4-kirkwood-tld-1 xhci-hcd [ 5.931167] usb usb3: SerialNumber: 0000:01:00.0 [ 5.936220] hub 3-0:1.0: USB hub found [ 5.940019] hub 3-0:1.0: 2 ports detected [ 5.944661] usbcore: registered new interface driver usb-storage [ 5.950985] mousedev: PS/2 mouse device common for all mice [ 5.956818] i2c /dev entries driver [ 5.966680] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 5.976120] hidraw: raw HID events driver (C) Jiri Kosina [ 5.982032] drop_monitor: Initializing network drop monitor service [ 5.988549] NET: Registered protocol family 17 [ 5.993119] Key type dns_resolver registered [ 5.997945] registered taskstats version 1 [ 6.002099] Loading compiled-in X.509 certificates [ 6.006973] zswap: loaded using pool lzo/zbud [ 6.016345] Key type big_key registered [ 6.021829] Key type encrypted registered [ 6.028559] rtc-pcf8563 0-0051: setting system clock to 2018-09-17 17:12:53 U TC (1537204373) [ 6.123187] ata2: SATA link down (SStatus 0 SControl F300) [ 6.138957] VFS: Cannot open root device "(null)" or unknown-block(0,0): erro r -6 [ 6.146515] Please append a correct "root=" boot option; here are the availab le partitions: [ 6.154952] 1f00 1024 mtdblock0 [ 6.154956] (driver?) [ 6.161558] 1f01 512 mtdblock1 [ 6.161561] (driver?) [ 6.168124] 1f02 512 mtdblock2 [ 6.168126] (driver?) [ 6.174708] 1f03 512 mtdblock3 [ 6.174712] (driver?) [ 6.181301] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.188069] 1f04 10240 mtdblock4 [ 6.188073] (driver?) [ 6.194733] 1f05 10240 mtdblock5 [ 6.194737] (driver?) [ 6.201333] 1f06 48896 mtdblock6 [ 6.201341] (driver?) [ 6.207904] 1f07 10240 mtdblock7 [ 6.207907] (driver?) [ 6.214498] 1f08 48896 mtdblock8 [ 6.214501] (driver?) [ 6.221086] Kernel panic - not syncing: VFS: Unable to mount root fs on unkno wn-block(0,0) [ 6.229392] CPU: 0 PID: 1 Comm: swapper Not tainted 4.18.4-kirkwood-tld-1 #1 [ 6.236468] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 6.242778] [<c010fccc>] (unwind_backtrace) from [<c010bf6c>] (show_stack+0x1 0/0x14) [ 6.250562] [<c010bf6c>] (show_stack) from [<c011a3a8>] (panic+0xc0/0x258) [ 6.257481] [<c011a3a8>] (panic) from [<c0c015d0>] (mount_block_root+0x1bc/0x 2a8) [ 6.265000] [<c0c015d0>] (mount_block_root) from [<c0c017a4>] (mount_root+0xe 8/0x154) [ 6.272865] [<c0c017a4>] (mount_root) from [<c0c01958>] (prepare_namespace+0x 148/0x188) [ 6.280905] [<c0c01958>] (prepare_namespace) from [<c0c0116c>] (kernel_init_f reeable+0x270/0x2e0) [ 6.289816] [<c0c0116c>] (kernel_init_freeable) from [<c08e93cc>] (kernel_ini t+0x8/0x10c) [ 6.298029] [<c08e93cc>] (kernel_init) from [<c01010e0>] (ret_from_fork+0x14/ 0x34) [ 6.305627] Exception stack(0xdf485fb0 to 0xdf485ff8) [ 6.310695] 5fa0: 00000000 00000000 00000 000 00000000 [ 6.318910] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000 000 00000000 [ 6.327123] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 6.333776] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]--- [ 6.461861] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcd Device=85.32 [ 6.470082] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.490386] usb 1-1: Product: USB2.0 Hub [ 6.500980] hub 1-1:1.0: USB hub found [ 6.510396] hub 1-1:1.0: 4 ports detected [ 6.840392] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 7.017985] usb 1-1.2: New USB device found, idVendor=0930, idProduct=6545, b cdDevice= 1.10 [ 7.040388] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 7.047735] usb 1-1.2: Product: DataTraveler 2.0 [ 7.060388] usb 1-1.2: Manufacturer: Kingston [ 7.064766] usb 1-1.2: SerialNumber: C86000BDBA0FBFB09A338F70 [ 7.081009] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.100601] scsi host2: usb-storage 1-1.2:1.0 [ 8.163570] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ : 0 ANSI: 6 [ 8.181771] sd 2:0:0:0: [sda] 15249408 512-byte logical blocks: (7.81 GB/7.27 GiB) [ 8.200413] sd 2:0:0:0: [sda] Write Protect is off [ 8.205253] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00 [ 8.220409] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe sn't support DPO or FUA [ 8.244976] sda: sda1 [ 8.250010] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 113.850424] random: crng init done
|
manti
Re: Debian-4.18.4-kirkwood-tld-1-rootfs-bodhi - NSA325v2 September 18, 2018 12:03PM |