Welcome! Log In Create A New Profile

Advanced

Kernel 4.18.5 MVEBU not booting on NAS326 (long file)

Posted by wha 
Tried installing 4.18.5 MVEBU package onto NAS326. It will boot, BUT then after a while, will crash.

Below was captured via serial port. Since I can't find a way of attaching the 800 lines of text, here it is in-line...



Welcome to minicom 2.7                                                                   
                                                                                         
OPTIONS: I18n                                                                            
Compiled on Apr 22 2017, 09:14:19.                                                       
Port /dev/ttyUSB0, 00:05:01                                                              
                                                                                         
Press CTRL-A Z for help on special keys                                                  
                                                                                         
                                                                                         
Marvell>> printenv mtdparts                                                              
mtdparts=mtdparts=pxa3xx_nand-0:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2)                                                                                       

Marvell>> printenv                                                                       
CASset=max                                                                               
CONTRY_TYPE=FF                                                                           
FEATURE_BIT=00                                                                           
MALLOC_len=5                                                                             
MODEL_ID=B303                                                                            
MPmode=SMP                                                                               
PRODUCT_NAME=STG-328
VENDOR_NAME=MitraStar Technology Corp.
autoload=yes
baudrate=115200
boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=armada-nand:2m(u-boot),2m(env),2m(config
),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs2) earlyprintk=serial
bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$boot
args_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=nand read 0x2000000 0x00000000; run bootcmd_custom;  0xF00000 && bootz 0x2000000
bootcmd_auto=stage_boot $boot_order
bootcmd_custom=if run sata_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; reset; 
fi; fi
bootcmd_custom_sata=if run sata_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; re
set; fi; fi
bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdpa
rts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd
0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nf
sroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.l
cd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000;
bootcmd_stock_1=run set_bootargs_stock; echo Booting from NAND kernel 1 ...; nand read 0x2000000 0x00E00000 0x
F00000 && bootz 0x2000000
bootcmd_stock_2=run set_bootargs_stock; echo Booting from NAND kernel 2 ...; nand read 0x2000000 0x08700000 0x
F00000 && bootz 0x2000000
bootdelay=10
cacheShare=no
change_boot_part=1
console=console=ttyS0,115200
core_checksum_1=868590f39fdf3fe14e07e5824a550dd7
core_checksum_2=868590f39fdf3fe14e07e5824a550dd7
curr_bootfrom=1
device_partition=0:1
disaMvPnp=no
eeeEnable=no
enaClockGating=no
enaCpuStream=no
enaFPU=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:38:32:25
eth1mtu=1500
eth2addr=00:50:43:38:a6:25
eth2mtu=1500
eth3addr=00:50:43:32:a6:38
eth3mtu=1500
ethact=egiga0
ethaddr=8C:59:73:15:74:51
ethmtu=1500
ethprime=egiga0
fdt_addr=2040000
fdt_skip_update=yes
fdtaddr=0x1000000
fdtfile=armada-38x-modular.dtb
fwversion_1=V5.20(AAZF.1)
fwversion_2=V5.20(AAZF.1)
ide_path=/
image_name=uImage
img_checksum_1=596153a55a196698e2f816f42d2dae47
img_checksum_2=596153a55a196698e2f816f42d2dae47
initrd_name=uInitrd
ipaddr=10.4.50.170
kernel_addr=${kernel_addr_1}
kernel_addr_1=0x00000000; run bootcmd_custom; 
kernel_addr_2=0x08700000
kernel_addr_r=2080000
kernel_mtd_1=3
kernel_mtd_2=5
lcd0_enable=0
lcd0_params=640x480-16@60
lcd_panel=0
load_dtb_addr=0x1000000
load_image_addr=0x02000000
load_initrd_addr=0x2900000
loadaddr=0x02000000
loads_echo=0
modelid_1=B303
modelid_2=B303
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=armada-nand
mtdparts=mtdparts=pxa3xx_nand-0:2m(u-boot),2m(env),2m(config),15m(kernel1),110m(rootfs1),15m(kernel2),-(rootfs
2)
mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
mv_pon_addr=00:50:43:25:a6:38
nandEcc=nfcConfig=4bitecc
netbsd_en=no
netmask=255.255.255.0
netretry=no
next_bootfrom=1
partition=nand0,0
pcieTune=no
pexMode=RC
pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
ramdisk_addr_r=2880000
revision_1=50729
revision_2=50729
romfile_checksum_1=9D0A
romfile_checksum_2=9D0A
rootpath=/srv/nfs/
sata_bootcmd=echo Booting from SATA ...; setenv fdt_skip_update yes; run sata_init; ext2load scsi 0:1 $load_im
age_addr /boot/zImage; ext2load scsi 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load scsi 0
:1 $load_initrd_addr /boot/uInitrd; run sata_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_
addr
sata_delay_reset=1
sata_dma_mode=yes
sata_init=mw.l f1018100 20420000; mw.l f1018140 003ca800; sleep 3; scsi reset
sata_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootHD rootdelay=4 earlyprintk=serial
script_addr_r=3000000
script_name=boot.scr
scsidevs=1
serial_number=S180Y04059618
serverip=10.4.50.38
set_bootargs_stock=setenv bootargs "console=ttyS0,115200 ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs1 rw 
rootdelay=2"
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=
$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
sysimg_mtd_1=4
sysimg_mtd_2=6
usb0Mode=host
usbActive=0
usbType=2
usb_bootcmd=echo Booting from USB ...; setenv fdt_skip_update yes; run usb_init; ext2load usb 0:1 $load_image_
addr /boot/zImage; ext2load usb 0:1 $load_dtb_addr /boot/dts/armada-380-zyxel-nas326.dtb; ext2load usb 0:1 $lo
ad_initrd_addr /boot/uInitrd; run usb_set_bootargs; bootz $load_image_addr $load_initrd_addr $load_dtb_addr
usb_init=mw.l f1018100 20420000; mw.l f1018140 003E8800; sleep 3; usb start
usb_set_bootargs=setenv bootargs "console=ttyS0,115200 root=LABEL=rootHD rootdelay=3 $mtdpartsearlyprintk=seri
al"
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81
zld_checksum_1=845ace22f5de7ac51fbd2ed1338bd28d
zld_checksum_2=845ace22f5de7ac51fbd2ed1338bd28d

Environment size: 5897/524284 bytes
Marvell>> printenv boot
  boot_order bootargs bootargs_dflt bootargs_end bootargs_root bootcmd
  bootcmd_auto bootcmd_custom bootcmd_custom_sata bootcmd_fdt
  bootcmd_fdt_boot bootcmd_fdt_edit bootcmd_lgcy bootcmd_stock_1
  bootcmd_stock_2 bootdelay
Marvell>> printenv boot
  boot_order bootargs bootargs_dflt bootargs_end bootargs_root bootcmd
  bootcmd_auto bootcmd_custom bootcmd_custom_sata bootcmd_fdt
  bootcmd_fdt_boot bootcmd_fdt_edit bootcmd_lgcy bootcmd_stock_1
  bootcmd_stock_2 bootdelay
Marvell>> printenv bootcmd_custom_sata 
bootcmd_custom_sata=if run sata_bootcmd; then; else if run bootcmd_stock_1; then; else run bootcmd_stock_2; re
set; fi; fi
Marvell>>  
Marvell>> 
Marvell>> 
Marvell>> 
Marvell>> run sata_bootcmd 
Booting from SATA ...

Reset SCSI
AHCI init for unit0
Target spinup took 0 ms.
SATA link 1 timeout.

Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found
scanning bus for devices...
  Device 0: (0:0) Vendor: ATA Prod.: ST9500325AS Rev: 0001
            Type: Hard Disk
            Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
Found 1 device(s).
4451808 bytes read in 387 ms (11 MiB/s)
18929 bytes read in 126 ms (146.5 KiB/s)
12368539 bytes read in 358 ms (32.9 MiB/s)
*  kernel: cmdline image address = 0x02000000
## Loading init Ramdisk from Legacy Image at 02900000 ...
   Image Name:   initrd.img-4.18.5-mvebu-tld-1
   Created:      2018-09-30   5:02:52 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    12368475 Bytes = 11.8 MiB
   Load Address: 00000000
   Entry Point:  00000000
## Flattened Device Tree blob at 01000000
   Booting using the fdt blob at 0x01000000
   Loading Ramdisk to 1ee03000, end 1f9cea5b ... OK
   Loading Device Tree to 00ff8000, end 00fff9f0 ... OK

   Skipping Device Tree update ('fdt_skip_update' = yes)

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.18.5-mvebu-tld-1 (root@tldDebianVM) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 
5.4.0-6ubuntu1~16.04.9)) #1 SMP PREEMPT Thu Aug 30 22:19:21 PDT 2018
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Zyxel NAS326
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] random: get_random_bytes called from start_kernel+0x78/0x4c4 with crng_init=0
[    0.000000] percpu: Embedded 18 pages/cpu @(ptrval) s41548 r8192 d23988 u73728
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootHD rootdelay=4 earlyprintk=serial
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 493092K/524288K available (9216K kernel code, 790K rwdata, 2304K rodata, 1024K init, 32
7K bss, 31196K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 791 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 328 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000007] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.007986] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 
440795225152 ns
[    0.018995] Switching to timer-based delay loop, resolution 1ns
[    0.025086] Ignoring duplicate/late registration of read_current_timer delay
[    0.032110] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7
6450417870 ns
[    0.043388] Console: colour dummy device 80x30
[    0.047833] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lp
j=6660000)
[    0.058409] pid_max: default: 32768 minimum: 301
[    0.063114] Security Framework initialized
[    0.067246] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.073834] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.081325] CPU: Testing write buffer coherency: ok
[    0.086204] CPU0: Spectre v2: using BPIALL workaround
[    0.091375] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.154976] Setting up static identity map for 0x100000 - 0x100060
[    0.161217] mvebu-soc-id: MVEBU SoC ID=0x6810, Rev=0x4
[    0.166454] mvebu-pmsu: Initializing Power Management Service Unit
[    0.172687] Hierarchical SRCU implementation.
[    0.214949] smp: Bringing up secondary CPUs ...
[    0.219463] smp: Brought up 1 node, 1 CPU
[    0.223455] SMP: Total of 1 processors activated (1332.00 BogoMIPS).
[    0.229797] CPU: All CPU(s) started in SVC mode.
[    0.234875] devtmpfs: initialized
[    0.245040] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.252923] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 n
s
[    0.262846] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.269093] prandom: seed boundary self test passed
[    0.275966] prandom: 100 self tests passed
[    0.280046] pinctrl core: initialized pinctrl subsystem
[    0.286092] NET: Registered protocol family 16
[    0.291036] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.298569] audit: initializing netlink subsys (disabled)
[    0.304075] audit: type=2000 audit(0.270:1): state=initialized audit_enabled=0 res=1
[    0.325090] cpuidle: using governor ladder
[    0.329209] cpuidle: using governor menu
[    0.333222] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.341221] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.347198] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.355268] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.426441] vgaarb: loaded
[    0.429429] SCSI subsystem initialized
[    0.435251] usbcore: registered new interface driver usbfs
[    0.440741] usbcore: registered new interface driver hub
[    0.446585] usbcore: registered new device driver usb
[    0.452101] media: Linux media interface: v0.10
[    0.456951] videodev: Linux video capture interface: v2.00
[    0.462670] pps_core: LinuxPPS API ver. 1 registered
[    0.467832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.477046] PTP clock support registered
[    0.482053] clocksource: Switched to clocksource arm_global_timer
[    0.534735] VFS: Disk quotas dquot_6.6.0
[    0.538688] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.555533] NET: Registered protocol family 2
[    0.560780] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.568470] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.575935] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.582416] TCP: Hash tables configured (established 4096 bind 4096)
[    0.588784] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.594669] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.601066] NET: Registered protocol family 1
[    0.635787] RPC: Registered named UNIX socket transport module.
[    0.641684] RPC: Registered udp transport module.
[    0.646406] RPC: Registered tcp transport module.
[    0.651089] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.657630] Unpacking initramfs...
[    1.111354] Freeing initrd memory: 12080K
[    1.115784] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.122523] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.132195] Initialise system trusted keyrings
[    1.136645] Key type blacklist registered
[    1.141327] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    1.147839] zbud: loaded
[    1.160931] NFS: Registering the id_resolver key type
[    1.166086] Key type id_resolver registered
[    1.170252] Key type id_legacy registered
[    1.174280] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.180954] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.187457] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.194814] orangefs_debugfs_init: called with debug mask: :none: :0:
[    1.201315] orangefs_init: module version upstream loaded
[    1.209977] Key type asymmetric registered
[    1.214116] Asymmetric key parser 'x509' registered
[    1.219062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.226513] io scheduler noop registered
[    1.230420] io scheduler deadline registered
[    1.234840] io scheduler cfq registered (default)
[    1.241232] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    1.251078] mv_xor f1060800.xor: Marvell shared XOR driver
[    1.312578] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.320173] mv_xor f1060900.xor: Marvell shared XOR driver
[    1.382571] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    1.457484] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.466322] console [ttyS0] disabled
[    1.490582] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 12500000) is a 16550A
[    1.499730] console [ttyS0] enabled
[    1.499730] console [ttyS0] enabled
[    1.506765] bootconsole [earlycon0] disabled
[    1.506765] bootconsole [earlycon0] disabled
[    1.516489] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    1.525928] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    1.545774] scsi host0: ahci-mvebu
[    1.559624] scsi host1: ahci-mvebu
[    1.563340] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 42
[    1.571301] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 42
[    1.580231] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[    1.586667] nand: Macronix MX30LF2G18AC
[    1.590611] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.598471] Bad block table found at page 131008, version 0x01
[    1.604683] Bad block table found at page 130944, version 0x01
[    1.610955] 7 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[    1.618289] Creating 7 MTD partitions on "pxa3xx_nand-0":
[    1.623749] 0x000000000000-0x000000200000 : "U-Boot"
[    1.629497] 0x000000200000-0x000000400000 : "U-Boot env"
[    1.635680] 0x000000400000-0x000000e00000 : "Config"
[    1.641549] 0x000000e00000-0x000001d00000 : "Kernel-1"
[    1.647724] 0x000001d00000-0x000008700000 : "RootFS-1"
[    1.654532] 0x000008700000-0x000009600000 : "Kernel-2"
[    1.660593] 0x000009600000-0x000010000000 : "RootFS-2"
[    1.669013] libphy: Fixed MDIO Bus: probed
[    1.675106] libphy: orion_mdio_bus: probed
[    1.684766] mvneta f1070000.ethernet eth0: Using device tree mac address 8c:59:73:15:74:51
[    1.695022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.701601] ehci-pci: EHCI PCI platform driver
[    1.706382] ehci-orion: EHCI orion driver
[    1.710541] orion-ehci f1058000.usb: EHCI Host Controller
[    1.716182] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    1.723939] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[    1.752069] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    1.758158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.766481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.773751] usb usb1: Product: EHCI Host Controller
[    1.778655] usb usb1: Manufacturer: Linux 4.18.5-mvebu-tld-1 ehci_hcd
[    1.785139] usb usb1: SerialNumber: f1058000.usb
[    1.790166] hub 1-0:1.0: USB hub found
[    1.794069] hub 1-0:1.0: 1 port detected
[    1.798741] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    1.804322] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    1.811941] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    1.821291] xhci-hcd f10f0000.usb3: irq 45, io mem 0xf10f0000
[    1.827350] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.835704] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.843001] usb usb2: Product: xHCI Host Controller
[    1.847905] usb usb2: Manufacturer: Linux 4.18.5-mvebu-tld-1 xhci-hcd
[    1.854403] usb usb2: SerialNumber: f10f0000.usb3
[    1.859516] hub 2-0:1.0: USB hub found
[    1.863414] hub 2-0:1.0: 1 port detected
[    1.867650] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    1.873121] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    1.880681] xhci-hcd f10f0000.usb3: Host supports USB 3.0  SuperSpeed
[    1.887235] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.895512] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    1.903995] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.911278] usb usb3: Product: xHCI Host Controller
[    1.916206] usb usb3: Manufacturer: Linux 4.18.5-mvebu-tld-1 xhci-hcd
[    1.922717] ata2: SATA link down (SStatus 0 SControl 300)
[    1.928159] usb usb3: SerialNumber: f10f0000.usb3
[    1.933293] hub 3-0:1.0: USB hub found
[    1.937180] hub 3-0:1.0: 1 port detected
[    1.941521] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    1.947033] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    1.954656] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    1.964020] xhci-hcd f10f8000.usb3: irq 46, io mem 0xf10f8000
[    1.969992] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.978396] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.985681] usb usb4: Product: xHCI Host Controller
[    1.990586] usb usb4: Manufacturer: Linux 4.18.5-mvebu-tld-1 xhci-hcd
[    1.997069] usb usb4: SerialNumber: f10f8000.usb3
[    2.002169] hub 4-0:1.0: USB hub found
[    2.006040] hub 4-0:1.0: 1 port detected
[    2.010251] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    2.015707] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    2.023270] xhci-hcd f10f8000.usb3: Host supports USB 3.0  SuperSpeed
[    2.029787] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.038051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    2.046456] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.053741] usb usb5: Product: xHCI Host Controller
[    2.058645] usb usb5: Manufacturer: Linux 4.18.5-mvebu-tld-1 xhci-hcd
[    2.065130] usb usb5: SerialNumber: f10f8000.usb3
[    2.070192] hub 5-0:1.0: USB hub found
[    2.074086] hub 5-0:1.0: 1 port detected
[    2.078512] usbcore: registered new interface driver usblp
[    2.084353] usbcore: registered new interface driver usb-storage
[    2.090654] mousedev: PS/2 mouse device common for all mice
[    2.097166] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[    2.104741] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.111553] i2c /dev entries driver
[    2.118741] orion_wdt: Initial timeout 171 sec
[    2.127278] marvell-cesa f1090000.crypto: CESA device successfully registered
[    2.134911] hidraw: raw HID events driver (C) Jiri Kosina
[    2.140816] usbcore: registered new interface driver usbhid
[    2.146768] usbhid: USB HID core driver
[    2.151004] drop_monitor: Initializing network drop monitor service
[    2.157801] NET: Registered protocol family 10
[    2.165125] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[    2.171080] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[    2.177929] Segment Routing with IPv6
[    2.181657] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.188769] NET: Registered protocol family 17
[    2.193568] 8021q: 802.1Q VLAN Support v1.8
[    2.197803] ata1.00: configured for UDMA/133
[    2.202159] Key type dns_resolver registered
[    2.206540] ThumbEE CPU extension supported.
[    2.210837] Registering SWP/SWPB emulation handler
[    2.216177] registered taskstats version 1
[    2.220296] Loading compiled-in X.509 certificates
[    2.225391] zswap: loaded using pool lzo/zbud
[    2.230084] scsi 0:0:0:0: Direct-Access     ATA      ST9500325AS      SDM1 PQ: 0 ANSI: 5
[    2.242412] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.252529] sd 0:0:0:0: [sda] Write Protect is off
[    2.262191] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.271797] Key type big_key registered
[    2.281538] Key type encrypted registered
[    2.287349] v5.0-sata0: supplied by pwr_en_sata0
[    2.292569] v12.0-sata0: supplied by pwr_en_sata0
[    2.298191] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    2.305024]  sda: sda1 sda2 sda3
[    2.309239] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    2.315578] armada38x-rtc f10a3800.rtc: setting system clock to 2018-09-30 07:09:25 UTC (1538291365)
[    2.325144] v5.0-sata1: supplied by pwr_en_sata1
[    2.329831] v12.0-sata1: supplied by pwr_en_sata1
[    2.334678] v5.0-sata0: disabling
[    2.338012] v12.0-sata0: disabling
[    2.341430] v5.0-sata1: disabling
[    2.344824] v12.0-sata1: disabling
[    2.349293] Freeing unused kernel memory: 1024K
[    2.354235] Checked W+X mappings: passed, no W+X pages found
Loading, please wait...
starting version 239
Begin: Loading essential drivers ... [    3.792382] raid6: int32x1  gen()   216 MB/s
[    3.962142] raid6: int32x1  xor()   248 MB/s
[    4.132410] raid6: int32x2  gen()   216 MB/s
[    4.302192] raid6: int32x2  xor()   223 MB/s
[    4.472309] raid6: int32x4  gen()   237 MB/s
[    4.642203] raid6: int32x4  xor()   192 MB/s
[    4.812163] raid6: int32x8  gen()   249 MB/s
[    4.982136] raid6: int32x8  xor()   191 MB/s
[    4.986429] raid6: using algorithm int32x8 gen() 249 MB/s
[    4.991855] raid6: .... xor() 191 MB/s, rmw enabled
[    4.996766] raid6: using intx1 recovery algorithm
[    5.004488] xor: measuring software checksum speed
[    5.102201]    arm4regs  :  2091.600 MB/sec
[    5.202092]    8regs     :  1582.000 MB/sec
[    5.302093]    32regs    :  1672.400 MB/sec
[    5.306298] xor: using function: arm4regs (2091.600 MB/sec)
[    5.317521] async_tx: api initialized (async)
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [    9.426237] Btrfs loaded, crc32c=crc32c-generic
Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.32.1
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 
rootHD: recovering journal
[   10.108528] random: fast init done
rootHD: Clearing orphaned inode 788125 (uid=0, gid=0, mode=0100600, size=47)
rootHD: clean, 97605/1222992 files, 705197/4882432 blocks
done.
[   10.858489] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   12.819864] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SY
SVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 de
fault-hierarchy=hybrid)
[   12.841614] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux buster/sid!

[   12.945456] systemd[1]: Set hostname to <nas326-51>.
[   14.963072] random: systemd: uninitialized urandom read (16 bytes read)
[   14.970034] systemd[1]: Listening on LVM2 poll daemon socket.
[  OK  ] Listening on LVM2 poll daemon socket.
[   15.002149] random: systemd: uninitialized urandom read (16 bytes read)
[   15.009394] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[   15.042152] random: systemd: uninitialized urandom read (16 bytes read)
[   15.049019] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[   15.131858] systemd[1]: Listening on RPCbind Server Activation Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
[   15.172386] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[   15.212282] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[   15.252269] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Created slice system-systemd\x2dfsck.slice.
[  OK  ] Listening on Journal Socket.
         Starting Monitoring of LVM2 mirrorsâ…ng dmeventd or progress polling...
         Starting udev Coldplug all Devices...
         Mounting Kernel Debug File System...
         Mounting NFSD configuration filesystem...
         Starting Load Kernel Modules...
         Starting Availability of block devices...
[  OK  ] Listening on Journal Audit Socket.
         Starting Create list of required stâ…ce nodes for the current kernel...
[  OK  ] Listening on Journal Socket (/dev/log).
         Starting Journal Service...
         Mounting RPC Pipe File System...
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Set up automount Arbitrary Executabâ…rmats File System Automount Point.
[   15.941900] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
         Mounting POSIX Message Queue File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Paths.
[  OK  ] Started Journal Service.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted NFSD configuration filesystem.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Availability of block devices.
[  OK  ] Started Create list of required staâ…vice nodes for the current kernel.
[  OK  ] Mounted RPC Pipe File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started LVM2 metadata daemon.
         Starting Create System Users...
         Starting Load/Save Random Seed...
         Starting pNFS block layout mapping daemon...
         Starting Apply Kernel Variables...
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started pNFS block layout mapping daemon.
[  OK  ] Started Apply Kernel Variables.
[   16.800255] systemd-journald[1560]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Monitoring of LVM2 mirrors,â…sing dmeventd or progress polling.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Found device /dev/ttyS0.
[   18.084253] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  OK  ] Found device /sys/subsystem/net/devices/eth0.
[   18.768811] random: crng init done
[   18.772263] random: 7 urandom warning(s) missed due to ratelimiting
[  OK  ] Found device ST9500325AS swapHD.
[  OK  ] Found device ST9500325AS Data1.
         Starting File System Check on /dev/disk/by-label/Data1...
         Activating swap /dev/disk/by-label/swapHD...
[  OK  ] Started File System Check Daemon to report status.
[   21.456453] Adding 1952764k swap on /dev/sda2.  Priority:-2 extents:1 across:1952764k FS
[  OK  ] Activated swap /dev/disk/by-label/swapHD.
[  OK  ] Reached target Swap.
[  OK  ] Started File System Check on /dev/disk/by-label/Data1.
         Mounting /data1...
[   22.519266] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[  OK  ] Mounted /data1.
[  OK  ] Reached target Local File Systems.
         Starting Create Volatile Files and Directories...
         Starting Raise network interfaces...
         Starting Preprocess NFS configuration...
         Starting Enable support for additional executable binary formats...
[  OK  ] Started ifup for eth0.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting RPC bind portmap service...
         Mounting Arbitrary Executable File Formats File System...
[  OK  ] Mounted Arbitrary Executable File Formats File System.
[  OK  ] Started Preprocess NFS configuration.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Snapper Snapshots.
[  OK  ] Started Take snapper snapshot of root on boot.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Timeline of Snapper Snapshots.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on UUID daemon activation socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started Self Monitoring and Reporting Technology (SMART) Daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting Initialize hardware monitoring sensors...
         Starting Login Service...
         Starting Disk Manager...
         Starting LSB: Execute the kexec -e command to reboot system...
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
         Starting NFSv4 ID-name mapping service...
[  OK  ] Reached target NFS client services.
[  OK  ] Started Enable support for additional executable binary formats.
         Starting Take snapper snapshot of root on boot...
[   25.113092] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:01] driver [Marvell 88E1510]
[   25.121987] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode
[   25.130799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  OK  ] Started Login Service.
[  OK  ] Started RPC bind portmap service.
[  OK  ] Started NFSv4 ID-name mapping service.
[  OK  ] Started Initialize hardware monitoring sensors.
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target Network.
         Starting OpenNTPd Network Time Protocol...
         Starting NFS Mount Daemon...
         Starting OpenBSD Secure Shell server...
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Started LSB: Execute the kexec -e command to reboot system.
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started NFS Mount Daemon.
         Starting NFS server and services...
[  OK  ] Started OpenNTPd Network Time Protocol.
[   27.420242] NFSD: starting 90-second grace period (net f0000039)
[  OK  ] Started NFS server and services.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Started Regular background program processing daemon.
         Starting LSB: Load kernel image with kexec...
         Starting Permit User Sessions...
         Starting LSB: exim Mail Transport Agent...
         Starting LSB: Starts syslogd...
[FAILED] Failed to start Take snapper snapshot of root on boot.
See 'systemctl status snapper-boot.service' for details.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Disk Manager.
[  OK  ] Started LSB: Load kernel image with kexec.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: Starts syslogd.
         Starting LSB: Starts klogd...
[  OK  ] Started LSB: Starts klogd.
[   28.352845] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   28.360913] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  OK  ] Started LSB: exim Mail Transport Agent.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux buster/sid nas326-51 ttyS0

nas326-51 login: 
Debian GNU/Linux buster/sid nas326-51 ttyS0

nas326-51 login: 
Debian GNU/Linux buster/sid nas326-51 ttyS0

nas326-51 login: root
Password: 
Last login: Sun Sep  9 01:21:54 PDT 2018 on ttyS0
Linux nas326-51 4.18.5-mvebu-tld-1 #1 SMP PREEMPT Thu Aug 30 22:19:21 PDT 2018 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
nas326-51
ip a
df -h

^C
[  243.712086] INFO: task kworker/0:2:46 blocked for more than 120 seconds.
[  243.718831]       Not tainted 4.18.5-mvebu-tld-1 #1
[  243.725256] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  243.733306] kworker/0:2     D    0    46      2 0x00000000
[  243.738836] Workqueue: events_power_efficient phy_state_machine
[  243.745019] [<c0958f90>] (__schedule) from [<c0959400>] (schedule+0xac/0xc4)
[  243.752259] [<c0959400>] (schedule) from [<c0959814>] (schedule_preempt_disabled+0x14/0x20)
[  243.760662] [<c0959814>] (schedule_preempt_disabled) from [<c095b07c>] (__mutex_lock.constprop.3+0x414/0x5d
8)
[  243.770842] [<c095b07c>] (__mutex_lock.constprop.3) from [<c06b059c>] (mdiobus_write+0x44/0x70)
[  243.779724] [<c06b059c>] (mdiobus_write) from [<c06b36d8>] (marvell_read_status+0x38/0x8c)
[  243.788170] [<c06b36d8>] (marvell_read_status) from [<c06accec>] (phy_state_machine+0x220/0x474)
[  243.797145] [<c06accec>] (phy_state_machine) from [<c013f9a0>] (process_one_work+0x258/0x474)
[  243.805846] [<c013f9a0>] (process_one_work) from [<c0140888>] (worker_thread+0x2bc/0x3d8)
[  243.814200] [<c0140888>] (worker_thread) from [<c0144c64>] (kthread+0x12c/0x14c)
[  243.821641] [<c0144c64>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[  243.829126] Exception stack(0xde9bffb0 to 0xde9bfff8)
[  243.834333] ffa0:                                     00000000 00000000 00000000 00000000
[  243.842676] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[  243.850899] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[  243.857790] INFO: task ethtool:2040 blocked for more than 120 seconds.
[  243.864477]       Not tainted 4.18.5-mvebu-tld-1 #1
[  243.869381] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  243.877464] ethtool         D    0  2040   2039 0x00000000
[  243.883111] [<c0958f90>] (__schedule) from [<c0959400>] (schedule+0xac/0xc4)
[  243.890203] [<c0959400>] (schedule) from [<c0959814>] (schedule_preempt_disabled+0x14/0x20)
[  243.898826] [<c0959814>] (schedule_preempt_disabled) from [<c095b07c>] (__mutex_lock.constprop.3+0x414/0x5d
8)
[  243.908920] [<c095b07c>] (__mutex_lock.constprop.3) from [<c06b04c0>] (mdiobus_read+0x40/0x68)
[  243.917714] [<c06b04c0>] (mdiobus_read) from [<c06b2dc4>] (m88e1318_set_wol+0x5c/0x188)
[  243.925887] [<c06b2dc4>] (m88e1318_set_wol) from [<c06bd3ac>] (mvneta_ethtool_set_wol+0x14/0x38)
[  243.934854] [<c06bd3ac>] (mvneta_ethtool_set_wol) from [<c07fb4c8>] (dev_ethtool+0x1bb4/0x273c)
[  243.943728] [<c07fb4c8>] (dev_ethtool) from [<c08163b4>] (dev_ioctl+0x178/0x454)
[  243.951173] [<c08163b4>] (dev_ioctl) from [<c07d1928>] (sock_ioctl+0x37c/0x47c)
[  243.958745] [<c07d1928>] (sock_ioctl) from [<c028e7ac>] (vfs_ioctl+0x18/0x3c)
[  243.966053] [<c028e7ac>] (vfs_ioctl) from [<c028ef40>] (do_vfs_ioctl+0x658/0x7d4)
[  243.973709] [<c028ef40>] (do_vfs_ioctl) from [<c028f108>] (ksys_ioctl+0x4c/0x74)
[  243.981149] [<c028f108>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[  243.989081] Exception stack(0xdc9d1fa8 to 0xdc9d1ff0)
[  243.994300] 1fa0:                   be9895e0 be989c54 00000003 00008946 be989c54 00000006
[  244.002650] 1fc0: be9895e0 be989c54 00000002 00000036 00000000 ffffffff ffffffff 00000002
[  244.010874] 1fe0: 0047705c be989004 0042feef b6ec9158
[  244.016181] INFO: task sshd:2043 blocked for more than 120 seconds.
[  244.022610]       Not tainted 4.18.5-mvebu-tld-1 #1
[  244.027514] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  244.035593] sshd            D    0  2043   1765 0x00000000
[  244.041120] [<c0958f90>] (__schedule) from [<c0959400>] (schedule+0xac/0xc4)
[  244.048416] [<c0959400>] (schedule) from [<c0959814>] (schedule_preempt_disabled+0x14/0x20)
[  244.056947] [<c0959814>] (schedule_preempt_disabled) from [<c095b07c>] (__mutex_lock.constprop.3+0x414/0x5d
8)
[  244.067041] [<c095b07c>] (__mutex_lock.constprop.3) from [<c08337b0>] (__netlink_dump_start+0x40/0x160)
[  244.076622] [<c08337b0>] (__netlink_dump_start) from [<c080531c>] (rtnetlink_rcv_msg+0x144/0x26c)
[  244.085668] [<c080531c>] (rtnetlink_rcv_msg) from [<c08357b8>] (netlink_rcv_skb+0x94/0xf8)
[  244.094111] [<c08357b8>] (netlink_rcv_skb) from [<c0834fdc>] (netlink_unicast+0x124/0x1e0)
[  244.102546] [<c0834fdc>] (netlink_unicast) from [<c0835494>] (netlink_sendmsg+0x354/0x374)
[  244.110860] [<c0835494>] (netlink_sendmsg) from [<c07d2ac4>] (sock_sendmsg+0x34/0x44)
[  244.118969] [<c07d2ac4>] (sock_sendmsg) from [<c07d3e80>] (__sys_sendto+0xc4/0x104)
[  244.126795] [<c07d3e80>] (__sys_sendto) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[  244.134797] Exception stack(0xdde47fa8 to 0xdde47ff0)
[  244.139879] 7fa0:                   beb28cf8 0000000c 00000003 beb28d20 00000014 00000000
[  244.148307] 7fc0: beb28cf8 0000000c beb28d20 00000122 00000003 beb28e34 b683dc00 beb28e38
[  244.156657] 7fe0: 00000122 beb27c60 b6b608dd b6ade286
[  244.161741] INFO: task ifconfig:2066 blocked for more than 120 seconds.
[  244.168603]       Not tainted 4.18.5-mvebu-tld-1 #1
[  244.173628] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  244.181501] ifconfig        D    0  2066   2065 0x00000001
[  244.187227] [<c0958f90>] (__schedule) from [<c0959400>] (schedule+0xac/0xc4)
[  244.194448] [<c0959400>] (schedule) from [<c0959814>] (schedule_preempt_disabled+0x14/0x20)
[  244.202972] [<c0959814>] (schedule_preempt_disabled) from [<c095b07c>] (__mutex_lock.constprop.3+0x414/0x5d
8)
[  244.213076] [<c095b07c>] (__mutex_lock.constprop.3) from [<c07d1978>] (sock_ioctl+0x3cc/0x47c)
[  244.221740] [<c07d1978>] (sock_ioctl) from [<c028e7ac>] (vfs_ioctl+0x18/0x3c)
[  244.229133] [<c028e7ac>] (vfs_ioctl) from [<c028ef40>] (do_vfs_ioctl+0x658/0x7d4)
[  244.236792] [<c028ef40>] (do_vfs_ioctl) from [<c028f108>] (ksys_ioctl+0x4c/0x74)
[  244.244383] [<c028f108>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x54)
[  244.252223] Exception stack(0xdd1e7fa8 to 0xdd1e7ff0)
[  244.257304] 7fa0:                   00000000 000003c0 00000004 00008912 bedfd9cc 00000000
[  244.265732] 7fc0: 00000000 000003c0 00000000 00000036 00000004 bedfd9cc 0000001e 00000000
[  244.274082] 7fe0: b6e85151 bedfd9c4 004a8199 b6e85158



CTRL-A Z for help | 115200 8N1 | NOR | Minicom 2.7 | VT102 | Online 0:7 | ttyUSB0

Re: Kernel 4.18.5 MVEBU not booting on NAS326 (long file)
September 30, 2018 03:17AM
wha,

This is the problem with systemd running with WOL activated.

If you don't need WOL, use ethtool to turn it off. It should be running OK after that.

Post if you are not sure how.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Kernel 4.18.5 MVEBU not booting on NAS326 (long file)
September 30, 2018 05:48AM
I hope I am wrong here. But, it looks like your device probably has a faulty RAM.
Re: Kernel 4.18.5 MVEBU not booting on NAS326 (long file)
September 30, 2018 03:58PM
habibie Wrote:
-------------------------------------------------------
> I hope I am wrong here. But, it looks like your
> device probably has a faulty RAM.

I don't see where it would be faulty RAM.

-bodhi
===========================
Forum Wiki
bodhi's corner
Turning Wake-On-Lan [WOL] off fixed the problem. The NAS has been running for over a day now. Before, it would crash within minutes. Thanks you bodhi !
Re: Kernel 4.18.5 MVEBU not booting on NAS326 (long file)
October 05, 2018 03:30AM
wha Wrote:
-------------------------------------------------------
> Turning Wake-On-Lan [WOL] off fixed the problem.
> The NAS has been running for over a day now.
> Before, it would crash within minutes. Thanks you
> bodhi !

Cool! I will retest this problem in sysvinit to confirm. IIRC, I did not see it on my box running sysvinit. But will reconfirm for sure. If it is common, then I will see if I can figure it out when kernel 4.19 is available. NSA326 WOL does not work right now, so turning it off is no loss.

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: