Luke G
Pogoplug won't boot with USB HDD attached. February 23, 2012 06:05AM |
Re: Pogoplug won't boot with USB HDD attached. February 23, 2012 06:38AM |
Registered: 13 years ago Posts: 78 |
Re: Pogoplug won't boot with USB HDD attached. February 23, 2012 03:54PM |
Registered: 14 years ago Posts: 264 |
Re: Pogoplug won't boot with USB HDD attached. February 23, 2012 04:06PM |
Registered: 14 years ago Posts: 264 |
Re: Pogoplug won't boot with USB HDD attached. February 23, 2012 09:54PM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 12:44AM |
Registered: 14 years ago Posts: 264 |
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 01:32AM |
Admin Registered: 13 years ago Posts: 19,106 |
Luke G
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 02:41AM |
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 11:11AM |
Registered: 14 years ago Posts: 132 |
Luke G
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 11:36AM |
Re: Pogoplug won't boot with USB HDD attached. February 24, 2012 02:25PM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Pogoplug won't boot with USB HDD attached. February 29, 2012 05:55PM |
Registered: 14 years ago Posts: 132 |
ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_installed=0 rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi force_rescue=0 force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi ubifs_mtd=3 ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_list=1 2 3 4 usb_scan_1=usb=0:1 dev=sda1 usb_scan_2=usb=1:1 dev=sdb1 usb_scan_3=usb=2:1 dev=sdc1 usb_scan_4=usb=3:1 dev=sdd1 usb_device=0:1 usb_root=/dev/sda1 usb_rootfstype=ext2 usb_rootdelay=10 usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset ethaddr=00:10:75:1A:5B:37 arcNumber=2097 usb_init=run usb_scan ; setenv usb_root LABEL=ROOTFS serverip=192.168.1.175 if_netconsole=ping $serverip start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; preboot=run if_netconsole start_netconsole
U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... unable to get device descriptor (error=-1) 6 USB Device(s) found scanning bus for storage devices... Device NOT ready Request Sense returned 00 00 00 2 Storage Device(s) found Loading file "/rescueme" from usb device 0:1 (usbda1) ** File not found /rescueme reading /rescueme.txt ** Unable to read "/rescueme.txt" from usb 0:1 ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 219 MiB UBI: number of good PEBs: 1751 UBI: number of bad PEBs: 1 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 1730 UBI: total number of reserved PEBs: 21 UBI: number of PEBs reserved for bad PEB handling: 17 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 Error reading superblock on volume 'ubi:rootfs'! Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1 bytes read Found bootable drive on usb 0:1 Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1438876 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 4745145 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32-5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1438812 Bytes = 1.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4745081 Bytes = 4.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ...
Re: Pogoplug won't boot with USB HDD attached. February 29, 2012 06:22PM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Pogoplug won't boot with USB HDD attached. February 29, 2012 08:14PM |
Registered: 14 years ago Posts: 132 |
Re: Pogoplug won't boot with USB HDD attached. March 01, 2012 12:03AM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Pogoplug won't boot with USB HDD attached. March 01, 2012 08:59AM |
Registered: 14 years ago Posts: 132 |
/dev/root / ext2 noatime,errors=remount-ro 0 1 UUID=9xx none swap sw 0 0 UUID=9xx /mnt/data ext3 rw,auto,user 0 0
Re: Pogoplug won't boot with USB HDD attached. March 01, 2012 04:40PM |
Admin Registered: 13 years ago Posts: 19,106 |
Re: Pogoplug won't boot with USB HDD attached. March 02, 2012 07:42AM |
Registered: 14 years ago Posts: 132 |
Re: Pogoplug won't boot with USB HDD attached. March 02, 2012 10:44AM |
Registered: 14 years ago Posts: 264 |
Foredecker
Re: Pogoplug won't boot with USB HDD attached. May 10, 2012 06:17AM |