edda_
NAS326 installation problem December 21, 2018 10:08AM |
Michael Käppler
NAS326 installation problem (without serial console) December 21, 2018 09:02AM |
Re: NAS326 installation problem December 21, 2018 04:33PM |
Admin Registered: 13 years ago Posts: 18,495 |
Quote
I tried the described steps for my NAS326 box, firmware
V5.21(AAZF.2) without serial console, but ended up booting the old kernel.
How can I debug this? Do these steps work with recent firmware or do I have to downgrade?
dmesg cat /proc/mtd fw_printenv
Michael Käppler
Re: NAS326 installation problem December 22, 2018 01:50PM |
Re: NAS326 installation problem December 22, 2018 01:58PM |
Registered: 5 years ago Posts: 9 |
Re: NAS326 installation problem December 22, 2018 06:06PM |
Admin Registered: 13 years ago Posts: 18,495 |
Re: NAS326 installation problem December 23, 2018 04:39PM |
Registered: 5 years ago Posts: 9 |
Re: NAS326 installation problem December 23, 2018 10:04PM |
Admin Registered: 13 years ago Posts: 18,495 |
Quote
Two another observations: Even with the flashdrive removed from the usb port, the nas326
looses its configuration on every startup (login settings admin/1234) This occurs since I changed
the uboot settings. Additionately, the web interface url shows a different revision (?):
(r50984 instead of the former r51161)
fw_setenv change_boot_part 1
fw_setenv kernel_addr_1 0x00E00000 fw_setenv kernel_addr_2 '0x00000000; run bootcmd_custom; '
Re: NAS326 installation problem January 01, 2019 03:25PM |
Registered: 5 years ago Posts: 9 |
Re: NAS326 installation problem January 01, 2019 10:50PM |
Admin Registered: 13 years ago Posts: 18,495 |