Welcome! Log In Create A New Profile

Advanced

Debian on Action Tech SG200 and MI424WR-rev-I

Posted by veriqster 
Forum List Message List New Topic
8086k
Re: Aruba AP-135
February 07, 2022 05:39PM
bkallus,
Look at my u-boot repo here. I provided a toolchain from marvell. I found this in actiontech official site.
https://github.com/msdos03/avanta-uboot-f660
Whatever, try all the kwboot sources you know, then you are more likely to find a usable one.



Edited 1 time(s). Last edit at 02/07/2022 05:49PM by 8086k.
Reply Quote
8086k
Re: Debian on Action Tech SG200 and MI424WR-rev-I
March 18, 2022 05:12AM
Hi bodhi
It's me again, I find the cause of realtek chip issue now.
Can you run DSA driver on 88f6560 internal switch now? I don't have much time to read the driver code, but I have read it briefly. Many functions are similar. Have a look on this project, please.
Reply Quote
bodhi
Re: Debian on Action Tech SG200 and MI424WR-rev-I
March 18, 2022 03:17PM
8086k,

I have not revisited this at all. It seems there is always something else more important on my list!

-bodhi
===========================
Forum Wiki
bodhi's corner
Reply Quote
8086k
Re: Debian on Action Tech SG200 and MI424WR-rev-I
March 26, 2022 10:52PM
bodhi,

It looks like rtl8192ce card is extremely sensitive to the time of PEX initialization. Adding a little delay could change the problem a lot. For example, before I add the delay, AP mode of channel 1 is unable to transfer data at all. After I add the delay, channel 1 is able to transfer data but there's massive packet loss and delay. I found a factor causing rtl8192ce problem.
Reply Quote
8086k
Re: Debian on Action Tech SG200 and MI424WR-rev-I
May 14, 2022 11:11PM
bodhi,

Do you know what is 'CPU Streaming' in marvell SoCs? Does it mean hardware decoding or something else?
Reply Quote
Page 11 of 11    Pages: Previous1234567891011
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: