Seagate go-flex boot failure October 03, 2019 11:51PM |
Registered: 9 years ago Posts: 22 |
Re: Seagate go-flex boot failure October 04, 2019 12:11AM |
Admin Registered: 13 years ago Posts: 19,107 |
Re: Seagate go-flex boot failure October 04, 2019 01:19AM |
Registered: 9 years ago Posts: 22 |
Re: Seagate go-flex boot failure October 04, 2019 02:09AM |
Admin Registered: 13 years ago Posts: 19,107 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:21:31 -0700) Seagate GoFlex Home <snip> Found bootable drive on ide 0 loading uImage ... 3821592 bytes read in 734 ms (5 MiB/s) loading uInitrd ... 11542986 bytes read in 1830 ms (6 MiB/s) loading DTB /boot/dts/kirkwood-goflexhome.dtb ... 10603 bytes read in 110 ms (93.8 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2019-10-03 23:50:59 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3821528 Bytes = 3.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.12.1-kirkwood-tld-1 Created: 2019-10-03 23:51:00 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 11542922 Bytes = 11 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... Bad Data CRC Ramdisk image is corrupt or invalid
#!/bin/bash pushd /boot pwd cp uInitrd uInitrd_$(date +%Y%m%d%H%M) /usr/bin/mkimage \ -A arm \ -O linux \ -T ramdisk \ -C gzip \ -a 0x00000000 \ -e 0x00000000 \ -n initramfs-4.4.0-kirkwood-tld-1 \ -d initrd.img-4.4.0-kirkwood-tld-1 \ uInitrd
Re: Seagate go-flex boot failure October 04, 2019 03:11AM |
Admin Registered: 13 years ago Posts: 19,107 |
cd /media/sdb1/boot ls -lart *
initrd.img-4.12.1-kirkwood-tld-1
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.12.1--kirkwood-tld-1 -d initrd.img-4.12.1-kirkwood-tld-1 uInitrd
sync
Re: Seagate go-flex boot failure October 04, 2019 07:40AM |
Registered: 11 years ago Posts: 1,303 |
Re: Seagate go-flex boot failure October 05, 2019 05:06PM |
Registered: 9 years ago Posts: 22 |
Re: Seagate go-flex boot failure October 05, 2019 05:39PM |
Admin Registered: 13 years ago Posts: 19,107 |
dmesg ls -lart /boot
Re: Seagate go-flex boot failure October 05, 2019 10:43PM |
Registered: 9 years ago Posts: 22 |
Re: Seagate go-flex boot failure October 06, 2019 01:11AM |
Admin Registered: 13 years ago Posts: 19,107 |
Re: Seagate go-flex boot failure October 06, 2019 06:25AM |
Registered: 9 years ago Posts: 22 |
Re: Seagate go-flex boot failure October 06, 2019 05:17PM |
Admin Registered: 13 years ago Posts: 19,107 |
Quote
Updated 25 Aug 2019:
Basic Debian buster Kirkwood rootfs for most Kirwood plugs:
- tarball size: 209M
- install size: 536M
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, sysvinit-utils, u-boot-tools, and mtd-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Download at Dropbox:
Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
md5:
cd8ad170aa1a9fdc2a0a1c43ab1c0721
sha256:
8ccbbced367b4c2bf3728262e882f8232aff0fecd1c0c767219a0cab49a0b9bf