Welcome! Log In Create A New Profile

Advanced

help! why my boot process always stopped here? just untar root. without modification.

Posted by youxiaojie 
MB302>> setenv bootargs rootdelay=1 root=/dev/mmcblk0p2 console=ttyS0,9600; mmcinit; ext2load mmc 0:2 0x2000000 /boot/uqzt529.fdt; ext2load mmc 0:2 0x2800000 /boot/uInitrd; bootm 0x2000000 0x2800000
SDHC found. Card desciption is:
Manufacturer: 0x1b, OEM "SM"
Product name: "00000", revision 1.0
Serial number: 2982811284
Manufacturing date: 2/2009
CRC: 0x00, b0 = 0

4976571 bytes read

9713936 bytes read
## Booting image at 02000000 ...
Image Name: Linux-5.2.9-kirkwood-tld-1
Created: 2019-12-04 3:31:01 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4976507 Bytes = 4.7 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02800000 ...
Image Name: initramfs-5.2.9-kirkwood-tld-1
Created: 2019-08-25 2:22:50 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9713872 Bytes = 9.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000][ T0] Booting Linux on physical CPU 0x0
[ 0.000000][ T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000][ T0] OF: fdt: Machine model: QiZhiTong 501M V2
[ 0.000000][ T0] Memory policy: Data cache writeback
[ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000][ T0] Kernel command line: rootdelay=1 root=/dev/mmcblk0p2 console=ttyS0,9600
[ 0.000000][ T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000][ T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000][ T0] Memory: 494680K/524288K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 29608K reserved, 0K cma-reserved)
[ 0.000000][ T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000][ T0] Tasks RCU enabled.
[ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000009][ T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000044][ T0] Switching to timer-based delay loop, resolution 5ns
[ 0.000775][ T0] Console: colour dummy device 80x30
[ 0.000823][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000848][ T0] pid_max: default: 32768 minimum: 301
[ 0.001203][ T0] LSM: Security Framework initializing
[ 0.001376][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001401][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002211][ T0] *** VALIDATE proc ***
[ 0.002448][ T0] *** VALIDATE cgroup1 ***
[ 0.002473][ T0] *** VALIDATE cgroup2 ***
[ 0.002565][ T0] CPU: Testing write buffer coherency: ok
[ 0.004084][ T1] Setting up static identity map for 0x100000 - 0x100058
[ 0.004372][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[ 0.004626][ T1] rcu: Hierarchical SRCU implementation.
[ 0.007748][ T1] devtmpfs: initialized
[ 0.013663][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.013693][ T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.013917][ T1] xor: measuring software checksum speed
[ 0.110105][ T1] arm4regs : 1083.600 MB/sec
[ 0.210065][ T1] 8regs : 650.400 MB/sec
[ 0.310066][ T1] 32regs : 946.000 MB/sec
[ 0.310084][ T1] xor: using function: arm4regs (1083.600 MB/sec)
[ 0.310103][ T1] prandom: seed boundary self test passed
[ 0.314298][ T1] prandom: 100 self tests passed
[ 0.314309][ T1] pinctrl core: initialized pinctrl subsystem
[ 0.315637][ T1] NET: Registered protocol family 16
[ 0.316118][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.316890][ T1] audit: initializing netlink subsys (disabled)
[ 0.318034][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1
[ 0.318142][ T1] cpuidle: using governor ladder
[ 0.318213][ T1] cpuidle: using governor menu
[ 0.318715][ T1] Feroceon L2: Enabling L2
[ 0.318761][ T1] Feroceon L2: Cache support initialised.
[ 0.324938][ T1] No ATAGs?
[ 2.560051][ C0] random: fast init done
[ 6.281646][ T71] alg: No test for lzo-rle (lzo-rle-generic)
[ 6.281998][ T73] alg: No test for lzo-rle (lzo-rle-scomp)
[ 6.460552][ T1] raid6: int32x8 gen() 127 MB/s
[ 6.630433][ T1] raid6: int32x8 xor() 86 MB/s
[ 6.800131][ T1] raid6: int32x4 gen() 129 MB/s
[ 6.970318][ T1] raid6: int32x4 xor() 83 MB/s
[ 7.140112][ T1] raid6: int32x2 gen() 132 MB/s
[ 7.310358][ T1] raid6: int32x2 xor() 94 MB/s
[ 7.480608][ T1] raid6: int32x1 gen() 100 MB/s
[ 7.650326][ T1] raid6: int32x1 xor() 68 MB/s
[ 7.650338][ T1] raid6: using algorithm int32x2 gen() 132 MB/s
[ 7.650346][ T1] raid6: .... xor() 94 MB/s, rmw enabled
[ 7.650354][ T1] raid6: using intx1 recovery algorithm
[ 7.650601][ T1] vgaarb: loaded
[ 7.651093][ T1] SCSI subsystem initialized
[ 7.651578][ T1] usbcore: registered new interface driver usbfs
[ 7.651640][ T1] usbcore: registered new interface driver hub
[ 7.651724][ T1] usbcore: registered new device driver usb
[ 7.651914][ T1] pps_core: LinuxPPS API ver. 1 registered
[ 7.651926][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 7.651953][ T1] PTP clock support registered
[ 7.653188][ T1] clocksource: Switched to clocksource orion_clocksource
[ 8.688778][ T1] VFS: Disk quotas dquot_6.6.0
[ 8.688875][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.698633][ T1] NET: Registered protocol family 2
[ 8.699438][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[ 8.699474][ T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 8.699533][ T1] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 8.699586][ T1] TCP: Hash tables configured (established 4096 bind 4096)
[ 8.699677][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 8.699704][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 8.699928][ T1] NET: Registered protocol family 1
[ 8.700547][ T1] RPC: Registered named UNIX socket transport module.
[ 8.700561][ T1] RPC: Registered udp transport module.
[ 8.700570][ T1] RPC: Registered tcp transport module.
[ 8.700578][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.700591][ T1] PCI: CLS 0 bytes, default 32
[ 8.700829][ T1] Trying to unpack rootfs image as initramfs...
[ 9.531615][ T1] Freeing initrd memory: 9488K
[ 9.531762][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
[ 9.532955][ T1] Initialise system trusted keyrings
[ 9.533000][ T1] Key type blacklist registered
[ 9.533291][ T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 9.533402][ T1] zbud: loaded
[ 9.534504][ T1] NFS: Registering the id_resolver key type
[ 9.534538][ T1] Key type id_resolver registered
[ 9.534547][ T1] Key type id_legacy registered
[ 9.534568][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 9.534584][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.534875][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 9.535107][ T1] fuse: init (API version 7.31)
[ 9.535498][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 9.535689][ T1] orangefs_init: module version upstream loaded
[ 9.535702][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[ 9.552497][ T1] async_tx: api initialized (async)
[ 9.552520][ T1] Key type asymmetric registered
[ 9.552530][ T1] Asymmetric key parser 'x509' registered
[ 9.552597][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 9.554086][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 9.556021][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 9.556044][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 9.556060][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 9.556074][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
[ 9.556188][ T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[ 9.556226][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[ 9.557739][ T1] PCI: bus0: Fast back to back transfers disabled
[ 9.557766][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 9.557949][ T1] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[ 9.557999][ T1] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4000ffff 64bit]
[ 9.558136][ T1] pci 0000:01:00.0: supports D1
[ 9.558152][ T1] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 9.584550][ T1] PCI: bus1: Fast back to back transfers disabled
[ 9.584577][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 9.584780][ T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[ 9.584799][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[ 9.584820][ T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[ 9.584843][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 9.584861][ T1] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 9.584968][ T1] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[ 9.585533][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
[ 9.644039][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 9.646010][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
[ 9.703984][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[ 9.706258][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 9.707529][ T1] printk: console [ttyS0] disabled
[ 9.707599][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 20.332277][ T1] printk: console [ttyS0] enabled
[ 20.398211][ T1] loop: module loaded
[ 20.444649][ T1] sata_mv f1080000.sata: slots 32 ports 1
[ 20.513002][ T1] scsi host0: sata_mv
[ 20.559271][ T1] ata1: SATA max UDMA/133 irq 33
[ 20.617472][ T1] nand: device found, Manufacturer ID: 0x20, Chip ID: 0x76
[ 20.701965][ T1] nand: ST Micro NAND 64MiB 3,3V 8-bit
[ 20.765567][ T1] nand: 64 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[ 20.861510][ T1] Scanning device for bad blocks
[ 20.919196][ T1] 3 fixed-partitions partitions found on MTD device orion_nand
[ 21.007866][ T1] Creating 3 MTD partitions on "orion_nand":
[ 21.077753][ T112] ata1: SATA link down (SStatus 0 SControl F300)
[ 21.151896][ T1] 0x000000000000-0x000000100000 : "u-boot"
[ 21.221039][ T1] 0x000000100000-0x000000400000 : "kernel"
[ 21.290257][ T1] 0x000000400000-0x000004000000 : "ubi"
[ 21.359079][ T1] libphy: Fixed MDIO Bus: probed
[ 21.417245][ T1] libphy: orion_mdio_bus: probed
[ 21.488240][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 21.578932][ T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[ 21.660895][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:90:0b:1f:bb:6c
[ 21.773682][ T1] mv643xx_eth_port mv643xx_eth_port.1: DMA mask not set
[ 22.573791][ T1] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:90:0b:1f:bb:6d
[ 22.686519][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.773065][ T1] ehci-pci: EHCI PCI platform driver
[ 22.834652][ T1] ehci-orion: EHCI orion driver
[ 22.891136][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
[ 22.965245][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 23.065482][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[ 23.173227][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 23.253793][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 23.361135][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 23.456016][ T1] usb usb1: Product: EHCI Host Controller
[ 23.522787][ T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[ 23.610381][ T1] usb usb1: SerialNumber: f1050000.ehci
[ 23.675659][ T1] hub 1-0:1.0: USB hub found
[ 23.729002][ T1] hub 1-0:1.0: 1 port detected
[ 23.785058][ T1] usbcore: registered new interface driver usb-storage
[ 23.865740][ T1] mousedev: PS/2 mouse device common for all mice
[ 23.941480][ T1] rtc-mv f1010300.rtc: registered as rtc0
[ 24.008451][ T1] i2c /dev entries driver
[ 24.060015][ T1] device-mapper: uevent: version 1.0.3
[ 24.124152][ T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 24.234077][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 24.320698][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 24.409328][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 24.496930][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
[ 24.584632][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[ 24.666066][ T1] device-mapper: raid: Loading target version 1.14.0
[ 24.745050][ T1] hidraw: raw HID events driver (C) Jiri Kosina
[ 24.818352][ T1] drop_monitor: Initializing network drop monitor service
[ 24.902256][ T1] NET: Registered protocol family 17
[ 24.963888][ T15] usb 1-1: New USB device found, idVendor=04cc, idProduct=1520, bcdDevice= 2.00
[ 25.070443][ T1] Key type dns_resolver registered
[ 25.130673][ T1] registered taskstats version 1
[ 25.188122][ T15] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 25.281946][ T1] Loading compiled-in X.509 certificates
[ 25.347740][ T1] zswap: loaded using pool lzo/zbud
[ 25.409047][ T15] hub 1-1:1.0: USB hub found
[ 25.475643][ T15] hub 1-1:1.0: 2 ports detected
[ 25.608859][ T1] Key type big_key registered
[ 25.704464][ T1] Key type encrypted registered
[ 25.762777][ T1] rtc-mv f1010300.rtc: setting system clock to 2000-07-27T17:14:46 UTC (964718086)
[ 25.875644][ T1] Freeing unused kernel memory: 1024K
[ 25.938837][ T1] Checked W+X mappings: passed, no W+X pages found
[ 26.014927][ T1] Run /init as init process
Loading, please wait...
Starting version 241
[ 27.020668][ T159] mvsdio f1090000.mvsdio: Got CD GPIO
[ 27.088121][ T157] mv88e6085 f1072004.mdio-bus-mii:0a: switch 0x1610 detected: Marvell 88E6161, revision 3
[ 27.425544][ T157] libphy: mdio: probed
[ 27.505140][ T15] mmc0: host does not support reading read-only switch, assuming write-enable
[ 27.611306][ T15] mmc0: new high speed SDHC card at address 0002
[ 27.693694][ T166] mmcblk0: mmc0:0002 00000 3.81 GiB
[ 27.759111][ T166] mmcblk0: p1 p2 p3 p4
[ 27.972646][ T157] mv88e6085 f1072004.mdio-bus-mii:0a: No tagger for this switch
[ 28.085754][ T157] mv88e6085: probe of f1072004.mdio-bus-mii:0a failed with error -92
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/mmcblk0p2] fsck.ext3 -a -C0 /dev/mmcbl[ 29.771404][ T199] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
k0p2
debian: clean, 15081/9753[ 29.894606][ T199] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
6 files, 158224/390144 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ 32.621341][ T400] input: buttons as /devices/platform/buttons/input/input0
[ ok done.
[ 32.762796][ T381] systemd-udevd[381]: Using default interface naming scheme 'v240'.
[....] Waiting for /dev[ 32.876010][ T380] systemd-udevd[380]: Using default interface naming scheme 'v240'.
to be fully populated...[ 33.241404][ T382] at24 0-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
[ 33.334490][ T379] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[ 33.723703][ T398] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 33.999178][ T401] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 34.131669][ T380] systemd-udevd[380]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 34.270916][ T381] systemd-udevd[381]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 34.524108][ T382] systemd-udevd[382]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 34.682616][ T379] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[ 35.310214][ T379] orion_wdt: Initial timeout 21 sec
[ 35.856602][ T398] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 35.943384][ T15] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 36.055471][ T15] cfg80211: failed to load regulatory.db
[ 36.339112][ T398] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xe08e0000, irq=42
[ 36.437831][ T382] systemd-udevd[382]: Using default interface naming scheme 'v240'.
[ 36.542732][ T382] systemd-udevd[382]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[ 36.681997][ T382] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 36.808895][ T378] systemd-udevd[378]: Using default interface naming scheme 'v240'.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[ 37.761276][ T609] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=debian is mounted
[ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[....] Initializing random number gener[ 40.467690][ T1083] random: dd: uninitialized urandom read (512 bytes read)
[ ok ..done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP[ 41.114485][ T1133] mv643xx_eth: no PHY
Client 4.4.1
C[ 41.114522][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
opyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:90:0b:1f:bb:6c
Sending on LPF/eth0/00:90:0b:1f:bb:6c
Sending on Socket/fallback
DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67
DHCPREQUEST for 192.168.0.15 on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
No DHCPOFFERS received.
Trying recorded lease 192.168.0.15
[ 116.183538][ T1140] NET: Registered protocol family 10
[ 116.249060][ T1140] Segment Routing with IPv6
PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.

--- 192.168.0.1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

No working leases in persistent database - sleeping.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1361 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1388 (klogd)
. ok
[....] Starting system message bus: dbus[ 123.729060][ T1418] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[ 123.844390][ T1418] random: dbus-daemon: uninitialized urandom read (12 bytes read)
. ok
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[ 124.102164][ T1441] random: avahi-daemon: uninitialized urandom read (4 bytes read)
. ok
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[....] Starting OpenBSD Secure Shell server: sshd[ 130.033255][ C0] random: crng init done
[ 130.082301][ C0] random: 1 urandom warning(s) missed due to ratelimiting
. ok
[ ok ] Running local boot scripts (/etc/rc.local).
\�
Re: help! why my boot process always stopped here? just untar root. without modification.
December 04, 2019 05:15AM
youxiaojie,

> MB302>> setenv bootargs rootdelay=1
> root=/dev/mmcblk0p2 console=ttyS0,9600; mmcinit;
> ext2load mmc 0:2 0x2000000 /boot/uqzt529.fdt;
> ext2load mmc 0:2 0x2800000 /boot/uInitrd; bootm
> 0x2000000 0x2800000

1. Is the /boot/uqzt529.fdt file an uImage with the DTB appended?

2. The rootfs is Ext4

debian: clean, 15081/9753[ 29.894606][ T199] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

Ext4 needs to be formatted with a no delay format option so it can be used as a rootfs. How did you format it? if the default option was used, the Ext4 file system will not be finalized right away, and it cannot be used as rootfs.

-bodhi
===========================
Forum Wiki
bodhi's corner
yes, devicetree appended. I formatted rootfs to ext3, is this fault?
got it!!! it is because of the speed of rs232 changed from 9600 to 115200!!
how to change it?
CPU0
17: 8998 bridge-interrupt-ctrl 2 Edge orion_event
25: 7 main-interrupt-ctrl@20200 29 Edge mv64xxx_i2c
26: 2571 main-interrupt-ctrl@20200 33 Edge ttyS0
28: 0 bridge-interrupt-ctrl 3 Edge f1020300.watchdog-timer
29: 0 main-interrupt-ctrl@20200 22 Edge f1030000.crypto
30: 23 main-interrupt-ctrl@20200 19 Edge ehci_hcd:usb1
31: 16227 main-interrupt-ctrl@20200 46 Edge f1072004.mdio-bus
32: 1 main-interrupt-ctrl@20200 53 Edge f1010300.rtc
33: 0 main-interrupt-ctrl@20200 21 Edge sata_mv[f1080000.sata]
34: 4067 main-interrupt-ctrl@20200 28 Edge mvsdio
35: 2 main-interrupt-ctrl@20200 5 Edge f1060800.xor
36: 2 main-interrupt-ctrl@20200 7 Edge f1060900.xor
37: 4 f1010140.gpio 10 Edge f1072004.mdio-bus-mii:0a
38: 923 main-interrupt-ctrl@20200 11 Edge eth0
39: 0 main-interrupt-ctrl@20200 15 Edge eth1
40: 0 f1010100.gpio 28 Edge f1090000.mvsdio cd
44: 0 mv88e6xxx-g1 3 Edge mv88e6xxx-g1-atu-prob
46: 0 mv88e6xxx-g1 5 Edge mv88e6xxx-g1-vtu-prob
48: 7 mv88e6xxx-g1 7 Edge mv88e6xxx-g2
50: 0 mv88e6xxx-g2 0 Edge mv88e6xxx-1:00
51: 0 mv88e6xxx-g2 1 Edge mv88e6xxx-1:01
52: 0 mv88e6xxx-g2 2 Edge mv88e6xxx-1:02
53: 6 mv88e6xxx-g2 3 Edge mv88e6xxx-1:03
54: 0 mv88e6xxx-g2 4 Edge mv88e6xxx-1:04
65: 1 mv88e6xxx-g2 15 Edge mv88e6xxx-watchdog
66: 294 f1010140.gpio 12 Edge Reset Button
67: 0 f1010140.gpio 8 Edge Power Button
Err: 0


look interrupt and reset button has respond when I press the button, but linux could not reset.
stty -F /dev/ttyS0 9600

edit /etc/inittab for permanent
T0:2345:respawn:/sbin/getty -L ttyS0 9600 linux



Edited 1 time(s). Last edit at 12/05/2019 04:39AM by youxiaojie.
Re: help! why my boot process always stopped here? just untar root. without modification.
December 04, 2019 05:20PM
youxiaojie,

> got it!!! it is because of the speed of rs232
> changed from 9600 to 115200!!
> how to change it?

setenv bootargs rootdelay=1 root=/dev/mmcblk0p2 console=ttyS0,115200

> look interrupt and reset button has respond when I press the button, but linux could not reset.

When you running the new basic Debian rootfs, you need to set this up yourself. Install esekeyd and use it to monitor the key presses and run the command/script when esekeyd receives the key event:

https://forum.doozan.com/read.php?2,32460,32467#msg-32467

-bodhi
===========================
Forum Wiki
bodhi's corner
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: