Re: LG N2R1D December 24, 2019 04:28PM |
Admin Registered: 13 years ago Posts: 18,821 |
dmesg cat /proc/cpuinfo cat /proc/mtd
Re: LG N2R1D December 26, 2019 04:50AM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D December 26, 2019 05:48AM |
Registered: 7 years ago Posts: 8 |
root@Neko-Nas:~# cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 992.87 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : LG Advanced Multimedia Storage NC1 Revision : 0000 Serial : 0000000000000000 root@Neko-Nas:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "u-boot" mtd1: 00400000 00020000 "kernel" mtd2: 00b00000 00020000 "rootfs" mtd3: 07000000 00020000 "data"
Re: LG N2R1D December 26, 2019 04:17PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Updated 25 Aug 2019:
Basic Debian buster Kirkwood rootfs for most Kirwood plugs:
- tarball size: 209M
- install size: 536M
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, sysvinit-utils, u-boot-tools, and mtd-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Download at Dropbox:
Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
./dts/kirkwood-n1t1.dtb
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Do not do this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Re: LG N2R1D December 26, 2019 05:00PM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D December 26, 2019 06:25PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: LG N2R1D March 08, 2020 02:33PM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D March 08, 2020 03:01PM |
Registered: 5 years ago Posts: 255 |
Re: LG N2R1D March 08, 2020 03:26PM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D March 08, 2020 03:53PM |
Registered: 5 years ago Posts: 255 |
Re: LG N2R1D March 08, 2020 04:30PM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D March 17, 2020 11:53AM |
Registered: 7 years ago Posts: 8 |
Re: LG N2R1D March 17, 2020 05:09PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Do not do this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts for the exact spelling of your Kirkwood box name).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-5.2.9-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-n2r1d.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.2.9-kirkwood-tld-1 -d zImage.fdt uImage
sync
Ynojal
Re: LG N2R1D September 11, 2020 07:47AM |
Re: LG N2R1D September 12, 2020 04:34PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
N2B1
88F6192
800Mhz ram
2 bay