|
Pogoplug V4 - no SATA or USB January 02, 2020 06:32PM |
Registered: 4 years ago Posts: 8 |
|
Re: Pogoplug V4 - no SATA or USB January 03, 2020 01:30AM |
Admin Registered: 13 years ago Posts: 19,114 |
Quote
udev
Automount USB drives with udev rules using disk label
|
Re: Pogoplug V4 - no SATA or USB January 03, 2020 07:34PM |
Registered: 4 years ago Posts: 8 |
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Pogoplug v4 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 104860K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 26212K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000081] Switching to timer-based delay loop, resolution 6ns [ 0.001267] Console: colour dummy device 80x30 [ 0.001347] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001390] pid_max: default: 32768 minimum: 301 [ 0.001979] LSM: Security Framework initializing [ 0.002250] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002298] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.002525] *** VALIDATE tmpfs *** [ 0.003915] *** VALIDATE proc *** [ 0.004361] *** VALIDATE cgroup1 *** [ 0.004401] *** VALIDATE cgroup2 *** [ 0.004585] CPU: Testing write buffer coherency: ok [ 0.007596] Setting up static identity map for 0x100000 - 0x100058 [ 0.008047] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.008526] rcu: Hierarchical SRCU implementation. [ 0.012650] devtmpfs: initialized [ 0.021391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021453] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.021899] xor: measuring software checksum speed [ 0.120187] arm4regs : 724.800 MB/sec [ 0.220129] 8regs : 435.200 MB/sec [ 0.320123] 32regs : 632.800 MB/sec [ 0.320156] xor: using function: arm4regs (724.800 MB/sec) [ 0.320191] prandom: seed boundary self test passed [ 0.326459] prandom: 100 self tests passed [ 0.326478] pinctrl core: initialized pinctrl subsystem [ 0.328953] NET: Registered protocol family 16 [ 0.330265] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.331884] audit: initializing netlink subsys (disabled) [ 0.334158] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1 [ 0.334357] cpuidle: using governor ladder [ 0.334487] cpuidle: using governor menu [ 0.335276] Feroceon L2: Enabling L2 [ 0.335349] Feroceon L2: Cache support initialised. [ 0.344533] No ATAGs? [ 2.560096] random: fast init done [ 7.880885] raid6: int32x8 gen() 70 MB/s [ 8.050469] raid6: int32x8 xor() 44 MB/s [ 8.220347] raid6: int32x4 gen() 72 MB/s [ 8.390232] raid6: int32x4 xor() 46 MB/s [ 8.560623] raid6: int32x2 gen() 93 MB/s [ 8.730261] raid6: int32x2 xor() 63 MB/s [ 8.900237] raid6: int32x1 gen() 75 MB/s [ 9.070306] raid6: int32x1 xor() 46 MB/s [ 9.070323] raid6: using algorithm int32x2 gen() 93 MB/s [ 9.070337] raid6: .... xor() 63 MB/s, rmw enabled [ 9.070350] raid6: using intx1 recovery algorithm [ 9.070740] vgaarb: loaded [ 9.071669] SCSI subsystem initialized [ 9.072036] libata version 3.00 loaded. [ 9.072427] usbcore: registered new interface driver usbfs [ 9.072542] usbcore: registered new interface driver hub [ 9.072671] usbcore: registered new device driver usb [ 9.072985] pps_core: LinuxPPS API ver. 1 registered [ 9.073002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 9.073045] PTP clock support registered [ 9.075237] clocksource: Switched to clocksource orion_clocksource [ 10.797093] *** VALIDATE bpf *** [ 10.797434] VFS: Disk quotas dquot_6.6.0 [ 10.797570] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 10.797723] *** VALIDATE ramfs *** [ 10.812946] thermal_sys: Registered thermal governor 'step_wise' [ 10.813382] NET: Registered protocol family 2 [ 10.814700] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 10.814755] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 10.814797] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 10.814830] TCP: Hash tables configured (established 1024 bind 1024) [ 10.815072] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 10.815119] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 10.815595] NET: Registered protocol family 1 [ 10.816703] RPC: Registered named UNIX socket transport module. [ 10.816722] RPC: Registered udp transport module. [ 10.816735] RPC: Registered tcp transport module. [ 10.816748] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.816770] PCI: CLS 0 bytes, default 32 [ 10.817299] Trying to unpack rootfs image as initramfs... [ 12.141074] Freeing initrd memory: 9440K [ 12.141330] NetWinder Floating Point Emulator V0.97 (double precision) [ 12.143309] Initialise system trusted keyrings [ 12.143402] Key type blacklist registered [ 12.143786] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 12.143926] zbud: loaded [ 12.145969] NFS: Registering the id_resolver key type [ 12.146016] Key type id_resolver registered [ 12.146032] Key type id_legacy registered [ 12.146067] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 12.146093] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.146782] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 12.147567] *** VALIDATE jffs2 *** [ 12.147593] fuse: init (API version 7.31) [ 12.147623] *** VALIDATE fuse *** [ 12.147643] *** VALIDATE fuse *** [ 12.148224] orangefs_debugfs_init: called with debug mask: :none: :0: [ 12.148532] orangefs_init: module version upstream loaded [ 12.148551] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 12.226845] async_tx: api initialized (async) [ 12.226886] Key type asymmetric registered [ 12.226902] Asymmetric key parser 'x509' registered [ 12.227015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 12.228617] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47 [ 12.228644] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49 [ 12.229221] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 12.231368] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 12.232268] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 12.232301] pci_bus 0000:00: root bus resource [bus 00-ff] [ 12.232325] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 12.232346] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 12.232368] pci_bus 0000:00: scanning bus [ 12.232498] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 12.232558] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 12.234155] pci_bus 0000:00: fixups for bus [ 12.234175] PCI: bus0: Fast back to back transfers disabled [ 12.234204] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 12.234218] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 12.234249] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 12.234456] pci_bus 0000:01: scanning bus [ 12.234528] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330 [ 12.234590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit] [ 12.234626] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 12.234660] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit] [ 12.234786] pci 0000:01:00.0: supports D1 [ 12.234808] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 12.234832] pci 0000:01:00.0: PME# disabled [ 12.234895] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 12.266534] pci_bus 0000:01: fixups for bus [ 12.266553] PCI: bus1: Fast back to back transfers disabled [ 12.266577] pci_bus 0000:01: bus scan returning with max=01 [ 12.266596] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 12.266623] pci_bus 0000:00: bus scan returning with max=01 [ 12.266899] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 12.266927] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref] [ 12.266959] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit] [ 12.266995] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit] [ 12.267030] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit] [ 12.267060] pci 0000:00:01.0: PCI bridge to [bus 01] [ 12.267087] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 12.267234] pcieport 0000:00:01.0: assign IRQ: got 0 [ 12.267263] pcieport 0000:00:01.0: enabling device (0140 -> 0142) [ 12.267305] pcieport 0000:00:01.0: enabling bus mastering [ 12.267367] pci 0000:00:01.0: enabling bus mastering [ 12.267387] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 12.268215] mv_xor f1060800.xor: Marvell shared XOR driver [ 12.326788] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 12.330634] mv_xor f1060900.xor: Marvell shared XOR driver [ 12.396767] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 12.401036] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 12.403089] printk: console [ttyS0] disabled [ 12.403228] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 13.397860] printk: console [ttyS0] enabled [ 13.415678] loop: module loaded [ 13.420002] sata_mv f1080000.sata: version 1.28 [ 13.420404] sata_mv f1080000.sata: slots 32 ports 2 [ 13.431525] scsi host0: sata_mv [ 13.436284] scsi host1: sata_mv [ 13.440511] ata1: SATA max UDMA/133 irq 32 [ 13.445375] ata2: SATA max UDMA/133 irq 32 [ 13.452084] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it [ 13.461574] ONFI parameter recovery failed, aborting [ 13.467267] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 13.474293] nand: Hynix NAND 128MiB 3,3V 8-bit [ 13.479440] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 13.487754] Scanning device for bad blocks [ 13.576852] 5 cmdlinepart partitions found on MTD device orion_nand [ 13.583788] Creating 5 MTD partitions on "orion_nand": [ 13.589642] 0x000000000000-0x000000200000 : "u-boot" [ 13.597486] 0x000000200000-0x000000500000 : "uImage" [ 13.605171] 0x000000500000-0x000000800000 : "uImage2" [ 13.613018] 0x000000800000-0x000001000000 : "failsafe" [ 13.620976] 0x000001000000-0x000008000000 : "root" [ 13.631122] libphy: Fixed MDIO Bus: probed [ 13.637243] libphy: orion_mdio_bus: probed [ 13.664263] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 13.778524] ata1: SATA link down (SStatus 0 SControl F300) [ 14.127074] ata2: SATA link down (SStatus 0 SControl F300) [ 14.386305] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:04:34:44 [ 14.395925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 14.403161] ehci-pci: EHCI PCI platform driver [ 14.408405] ehci-orion: EHCI orion driver [ 14.413406] orion-ehci f1050000.ehci: EHCI Host Controller [ 14.419656] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 14.428281] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 14.455294] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 14.462416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 14.471389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.479306] usb usb1: Product: EHCI Host Controller [ 14.484859] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 14.492169] usb usb1: SerialNumber: f1050000.ehci [ 14.498584] hub 1-0:1.0: USB hub found [ 14.503087] hub 1-0:1.0: 1 port detected [ 14.508853] xhci_hcd 0000:01:00.0: assign IRQ: got 37 [ 14.508970] xhci_hcd 0000:01:00.0: enabling bus mastering [ 14.508990] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 14.514922] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 14.524799] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010 [ 14.534680] xhci_hcd 0000:01:00.0: enabling Mem-Wr-Inval [ 14.535498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 14.544434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.552354] usb usb2: Product: xHCI Host Controller [ 14.557938] usb usb2: Manufacturer: Linux 5.4.2-kirkwood-tld-1 xhci-hcd [ 14.565218] usb usb2: SerialNumber: 0000:01:00.0 [ 14.571504] hub 2-0:1.0: USB hub found [ 14.576085] hub 2-0:1.0: 2 ports detected [ 14.581715] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 14.587736] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3 [ 14.595890] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 14.603023] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 14.612056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 14.621220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.629150] usb usb3: Product: xHCI Host Controller [ 14.634711] usb usb3: Manufacturer: Linux 5.4.2-kirkwood-tld-1 xhci-hcd [ 14.642023] usb usb3: SerialNumber: 0000:01:00.0 [ 14.648274] hub 3-0:1.0: USB hub found [ 14.652763] hub 3-0:1.0: 2 ports detected [ 14.658716] usbcore: registered new interface driver usb-storage [ 14.666046] mousedev: PS/2 mouse device common for all mice [ 14.925325] usb usb2-port1: over-current condition [ 15.005331] usb usb3-port1: over-current condition [ 15.165337] usb usb2-port2: over-current condition [ 15.245331] usb usb3-port2: over-current condition [ 15.685286] rtc-mv f1010300.rtc: internal RTC not ticking [ 15.691623] i2c /dev entries driver [ 15.696834] device-mapper: uevent: version 1.0.3 [ 15.702601] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 15.712418] device-mapper: multipath round-robin: version 1.2.0 loaded [ 15.719723] device-mapper: multipath queue-length: version 0.2.0 loaded [ 15.727076] device-mapper: multipath service-time: version 0.3.0 loaded [ 15.734479] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 15.741283] device-mapper: raid: Loading target version 1.14.0 [ 15.749637] hidraw: raw HID events driver (C) Jiri Kosina [ 15.756189] exFAT: Version 1.3.0 [ 15.760242] drop_monitor: Initializing network drop monitor service [ 15.767643] NET: Registered protocol family 17 [ 15.773183] Key type dns_resolver registered [ 15.778841] registered taskstats version 1 [ 15.783618] Loading compiled-in X.509 certificates [ 15.789289] zswap: loaded using pool lzo/zbud [ 15.794674] Key type ._fscrypt registered [ 15.799418] Key type .fscrypt registered [ 15.951072] Key type big_key registered [ 16.021131] Key type encrypted registered [ 16.030020] hctosys: unable to open rtc device (rtc0) [ 16.040953] Freeing unused kernel memory: 1024K [ 16.066535] Checked W+X mappings: passed, no W+X pages found [ 16.072868] Run /init as init process [ 17.244867] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 17.567871] mvsdio f1090000.mvsdio: Got CD GPIO [ 17.649935] mmc0: host does not support reading read-only switch, assuming write-enable [ 17.667271] mmc0: new high speed SDHC card at address 59b4 [ 17.928263] mmcblk0: mmc0:59b4 00000 14.9 GiB [ 17.937494] mmcblk0: p1 [ 29.879403] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem [ 29.928268] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 34.190481] systemd-udevd[379]: Using default interface naming scheme 'v240'. [ 34.463415] systemd-udevd[379]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 34.788878] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 34.944016] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 35.017277] orion_wdt f1020300.watchdog-timer: IRQ index 1 not found [ 35.095792] orion_wdt: Initial timeout 25 sec [ 35.402757] systemd-udevd[398]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 35.974675] marvell-cesa f1030000.crypto: CESA device successfully registered [ 38.543721] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro [ 42.960944] random: dd: uninitialized urandom read (512 bytes read) [ 46.135870] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 52.424141] NET: Registered protocol family 10 [ 52.431706] Segment Routing with IPv6 [ 58.045270] sched: RT throttling activated [ 62.249460] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 62.293609] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 62.581933] random: avahi-daemon: uninitialized urandom read (4 bytes read) [ 63.479309] urandom_read: 1 callbacks suppressed [ 63.479323] random: fail2ban-client: uninitialized urandom read (24 bytes read) [ 65.434061] random: fail2ban-client: uninitialized urandom read (24 bytes read) [ 67.951262] random: fail2ban-server: uninitialized urandom read (24 bytes read) [ 69.861706] random: fail2ban-server: uninitialized urandom read (256 bytes read) [ 71.985401] random: crng init done
fdisk -l Disk /dev/mtdblock0: 2 MiB, 2097152 bytes, 4096 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mtdblock1: 3 MiB, 3145728 bytes, 6144 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mtdblock2: 3 MiB, 3145728 bytes, 6144 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mtdblock3: 8 MiB, 8388608 bytes, 16384 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mtdblock4: 112 MiB, 117440512 bytes, 229376 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/mmcblk0: 14.9 GiB, 16021192704 bytes, 31291392 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xfd637859 Device Boot Start End Sectors Size Id Type /dev/mmcblk0p1 * 2048 31291391 31289344 14.9G 83 Linux
drwxr-xr-x 12 root root 2880 Dec 31 1969 . drwxr-xr-x 21 root root 4096 Feb 16 2015 .. lrwxrwxrwx 1 root root 9 Dec 31 1969 MAKEDEV -> /bin/true crw------- 1 root root 10, 235 Dec 31 1969 autofs drwxr-xr-x 2 root root 340 Dec 31 1969 block crw------- 1 root root 10, 234 Dec 31 1969 btrfs-control drwxr-xr-x 3 root root 60 Dec 31 1969 bus drwxr-xr-x 2 root root 2260 Dec 31 1969 char crw------- 1 root root 5, 1 Dec 31 1969 console crw------- 1 root root 10, 62 Dec 31 1969 cpu_dma_latency crw------- 1 root root 10, 203 Dec 31 1969 cuse drwxr-xr-x 7 root root 140 Dec 31 1969 disk lrwxrwxrwx 1 root root 13 Dec 31 1969 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 Dec 31 1969 full crw-rw-rw- 1 root root 10, 229 Dec 31 1969 fuse crw------- 1 root root 254, 0 Dec 31 1969 gpiochip0 crw------- 1 root root 254, 1 Dec 31 1969 gpiochip1 drwxr-xr-x 3 root root 100 Dec 31 1969 input crw-r--r-- 1 root root 1, 11 Dec 31 1969 kmsg srw-rw-rw- 1 root root 0 Dec 31 1969 log crw-rw---- 1 root disk 10, 237 Dec 31 1969 loop-control brw-rw---- 1 root disk 7, 0 Dec 31 1969 loop0 brw-rw---- 1 root disk 7, 1 Dec 31 1969 loop1 brw-rw---- 1 root disk 7, 2 Dec 31 1969 loop2 brw-rw---- 1 root disk 7, 3 Dec 31 1969 loop3 brw-rw---- 1 root disk 7, 4 Dec 31 1969 loop4 brw-rw---- 1 root disk 7, 5 Dec 31 1969 loop5 brw-rw---- 1 root disk 7, 6 Dec 31 1969 loop6 brw-rw---- 1 root disk 7, 7 Dec 31 1969 loop7 drwxr-xr-x 2 root root 60 Dec 31 1969 mapper crw-r----- 1 root kmem 1, 1 Dec 31 1969 mem brw-rw---- 1 root disk 179, 0 Dec 31 1969 mmcblk0 brw-rw---- 1 root disk 179, 1 Dec 31 1969 mmcblk0p1 crw------- 1 root root 90, 0 Dec 31 1969 mtd0 crw------- 1 root root 90, 1 Dec 31 1969 mtd0ro crw------- 1 root root 90, 2 Dec 31 1969 mtd1 crw------- 1 root root 90, 3 Dec 31 1969 mtd1ro crw------- 1 root root 90, 4 Dec 31 1969 mtd2 crw------- 1 root root 90, 5 Dec 31 1969 mtd2ro crw------- 1 root root 90, 6 Dec 31 1969 mtd3 crw------- 1 root root 90, 7 Dec 31 1969 mtd3ro crw------- 1 root root 90, 8 Dec 31 1969 mtd4 crw------- 1 root root 90, 9 Dec 31 1969 mtd4ro brw-rw---- 1 root disk 31, 0 Dec 31 1969 mtdblock0 brw-rw---- 1 root disk 31, 1 Dec 31 1969 mtdblock1 brw-rw---- 1 root disk 31, 2 Dec 31 1969 mtdblock2 brw-rw---- 1 root disk 31, 3 Dec 31 1969 mtdblock3 brw-rw---- 1 root disk 31, 4 Dec 31 1969 mtdblock4 drwxr-xr-x 2 root root 60 Dec 31 1969 net crw-rw-rw- 1 root root 1, 3 Dec 31 1969 null crw-r----- 1 root kmem 1, 4 Dec 31 1969 port crw------- 1 root root 108, 0 Dec 31 1969 ppp crw------- 1 root root 10, 1 Dec 31 1969 psaux crw-rw-rw- 1 root tty 5, 2 Jan 3 19:29 ptmx drwxr-xr-x 2 root root 0 Dec 31 1969 pts crw-rw-rw- 1 root root 1, 8 Dec 31 1969 random drwxrwxrwt 2 root root 60 Dec 31 1969 shm crw------- 1 root root 10, 231 Dec 31 1969 snapshot drwxr-xr-x 2 root root 80 Dec 31 1969 snd lrwxrwxrwx 1 root root 15 Dec 31 1969 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 Dec 31 1969 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 Dec 31 1969 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 Dec 31 1969 tty crw--w---- 1 root tty 4, 0 Dec 31 1969 tty0 crw--w---- 1 root tty 4, 1 Dec 31 1969 tty1 crw--w---- 1 root tty 4, 10 Dec 31 1969 tty10 crw--w---- 1 root tty 4, 11 Dec 31 1969 tty11 crw--w---- 1 root tty 4, 12 Dec 31 1969 tty12 crw--w---- 1 root tty 4, 13 Dec 31 1969 tty13 crw--w---- 1 root tty 4, 14 Dec 31 1969 tty14 crw--w---- 1 root tty 4, 15 Dec 31 1969 tty15 crw--w---- 1 root tty 4, 16 Dec 31 1969 tty16 crw--w---- 1 root tty 4, 17 Dec 31 1969 tty17 crw--w---- 1 root tty 4, 18 Dec 31 1969 tty18 crw--w---- 1 root tty 4, 19 Dec 31 1969 tty19 crw--w---- 1 root tty 4, 2 Dec 31 1969 tty2 crw--w---- 1 root tty 4, 20 Dec 31 1969 tty20 crw--w---- 1 root tty 4, 21 Dec 31 1969 tty21 crw--w---- 1 root tty 4, 22 Dec 31 1969 tty22 crw--w---- 1 root tty 4, 23 Dec 31 1969 tty23 crw--w---- 1 root tty 4, 24 Dec 31 1969 tty24 crw--w---- 1 root tty 4, 25 Dec 31 1969 tty25 crw--w---- 1 root tty 4, 26 Dec 31 1969 tty26 crw--w---- 1 root tty 4, 27 Dec 31 1969 tty27 crw--w---- 1 root tty 4, 28 Dec 31 1969 tty28 crw--w---- 1 root tty 4, 29 Dec 31 1969 tty29 crw--w---- 1 root tty 4, 3 Dec 31 1969 tty3 crw--w---- 1 root tty 4, 30 Dec 31 1969 tty30 crw--w---- 1 root tty 4, 31 Dec 31 1969 tty31 crw--w---- 1 root tty 4, 32 Dec 31 1969 tty32 crw--w---- 1 root tty 4, 33 Dec 31 1969 tty33 crw--w---- 1 root tty 4, 34 Dec 31 1969 tty34 crw--w---- 1 root tty 4, 35 Dec 31 1969 tty35 crw--w---- 1 root tty 4, 36 Dec 31 1969 tty36 crw--w---- 1 root tty 4, 37 Dec 31 1969 tty37 crw--w---- 1 root tty 4, 38 Dec 31 1969 tty38 crw--w---- 1 root tty 4, 39 Dec 31 1969 tty39 crw--w---- 1 root tty 4, 4 Dec 31 1969 tty4 crw--w---- 1 root tty 4, 40 Dec 31 1969 tty40 crw--w---- 1 root tty 4, 41 Dec 31 1969 tty41 crw--w---- 1 root tty 4, 42 Dec 31 1969 tty42 crw--w---- 1 root tty 4, 43 Dec 31 1969 tty43 crw--w---- 1 root tty 4, 44 Dec 31 1969 tty44 crw--w---- 1 root tty 4, 45 Dec 31 1969 tty45 crw--w---- 1 root tty 4, 46 Dec 31 1969 tty46 crw--w---- 1 root tty 4, 47 Dec 31 1969 tty47 crw--w---- 1 root tty 4, 48 Dec 31 1969 tty48 crw--w---- 1 root tty 4, 49 Dec 31 1969 tty49 crw--w---- 1 root tty 4, 5 Dec 31 1969 tty5 crw--w---- 1 root tty 4, 50 Dec 31 1969 tty50 crw--w---- 1 root tty 4, 51 Dec 31 1969 tty51 crw--w---- 1 root tty 4, 52 Dec 31 1969 tty52 crw--w---- 1 root tty 4, 53 Dec 31 1969 tty53 crw--w---- 1 root tty 4, 54 Dec 31 1969 tty54 crw--w---- 1 root tty 4, 55 Dec 31 1969 tty55 crw--w---- 1 root tty 4, 56 Dec 31 1969 tty56 crw--w---- 1 root tty 4, 57 Dec 31 1969 tty57 crw--w---- 1 root tty 4, 58 Dec 31 1969 tty58 crw--w---- 1 root tty 4, 59 Dec 31 1969 tty59 crw--w---- 1 root tty 4, 6 Dec 31 1969 tty6 crw--w---- 1 root tty 4, 60 Dec 31 1969 tty60 crw--w---- 1 root tty 4, 61 Dec 31 1969 tty61 crw--w---- 1 root tty 4, 62 Dec 31 1969 tty62 crw--w---- 1 root tty 4, 63 Dec 31 1969 tty63 crw--w---- 1 root tty 4, 7 Dec 31 1969 tty7 crw--w---- 1 root tty 4, 8 Dec 31 1969 tty8 crw--w---- 1 root tty 4, 9 Dec 31 1969 tty9 crw--w---- 1 root tty 4, 64 Dec 31 1969 ttyS0 crw-rw---- 1 root dialout 4, 65 Dec 31 1969 ttyS1 crw------- 1 root root 10, 61 Dec 31 1969 ubi_ctrl crw------- 1 root root 10, 239 Dec 31 1969 uhid crw------- 1 root root 10, 223 Dec 31 1969 uinput crw-rw-rw- 1 root root 1, 9 Dec 31 1969 urandom crw-rw---- 1 root tty 7, 0 Dec 31 1969 vcs crw-rw---- 1 root tty 7, 1 Dec 31 1969 vcs1 crw-rw---- 1 root tty 7, 128 Dec 31 1969 vcsa crw-rw---- 1 root tty 7, 129 Dec 31 1969 vcsa1 crw-rw---- 1 root tty 7, 64 Dec 31 1969 vcsu crw-rw---- 1 root tty 7, 65 Dec 31 1969 vcsu1 crw------- 1 root root 10, 63 Dec 31 1969 vga_arbiter crw------- 1 root root 10, 137 Dec 31 1969 vhci crw------- 1 root root 10, 130 Dec 31 1969 watchdog crw------- 1 root root 248, 0 Dec 31 1969 watchdog0 crw-rw-rw- 1 root root 1, 5 Dec 31 1969 zero
|
Re: Pogoplug V4 - no SATA or USB January 03, 2020 10:48PM |
Admin Registered: 13 years ago Posts: 19,114 |
lsusb -vvv
|
Re: Pogoplug V4 - no SATA or USB January 03, 2020 11:19PM |
Registered: 4 years ago Posts: 8 |
lsusb -vvvcommand:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 5.04
iManufacturer 3 Linux 5.4.2-kirkwood-tld-1 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 f1050000.ehci
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 1
wHubCharacteristic 0x0009
Per-port power switching
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 5.04
iManufacturer 3 Linux 5.4.2-kirkwood-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:01:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x001f
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.0088 5Gbps SS.disabled oc
Port 2: 0000.0088 5Gbps SS.disabled oc
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000f
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 0 micro seconds
bU2DevExitLat 0 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 5.04
iManufacturer 3 Linux 5.4.2-kirkwood-tld-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:01:00.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 2
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0008 oc
Port 2: 0000.0008 oc
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
|
Re: Pogoplug V4 - no SATA or USB January 04, 2020 01:47AM |
Admin Registered: 13 years ago Posts: 19,114 |
usb start ide reset
usb part ide part
|
Re: Pogoplug V4 - no SATA or USB January 04, 2020 09:38AM |
Registered: 4 years ago Posts: 8 |
Bus 002 Device 004: ID 058f:6387 Alcor Micro Corp. Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x058f Alcor Micro Corp.
idProduct 0x6387 Flash Drive
bcdDevice 1.0b
iManufacturer 1
iProduct 2
iSerial 3 13062586130113
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Pogov4> usb start
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Pogov4>
Pogov4> ide reset Reset IDE: ide_preinit failed Pogov4>
|
Re: Pogoplug V4 - no SATA or USB January 04, 2020 11:24PM |
Admin Registered: 13 years ago Posts: 19,114 |
|
Re: Pogoplug V4 - no SATA or USB January 10, 2020 06:03PM |
Registered: 4 years ago Posts: 8 |
[ 14.925325] usb usb2-port1: over-current condition [ 15.005331] usb usb3-port1: over-current condition [ 15.165337] usb usb2-port2: over-current condition [ 15.245331] usb usb3-port2: over-current condition
|
Re: Pogoplug V4 - no SATA or USB February 14, 2021 06:44AM |
Registered: 3 years ago Posts: 1 |
[ 12.773706] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 603A PQ: 0 ANSI: 5 [ 12.828229] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 12.837760] sd 0:0:0:0: [sda] Write Protect is off [ 12.842549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 12.842714] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 12.857859] sda: sda1 sda2 sda3 sda5 sda6 sda7 sda8 sda9 [ 12.869204] sd 0:0:0:0: [sda] Attached SCSI disk [ 12.888701] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.684455] scsi 1:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6 [ 13.704321] sd 1:0:0:0: [sdb] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB) [ 13.712462] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 13.718146] sd 1:0:0:0: [sdb] Write Protect is off [ 13.722930] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 13.728542] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.755602] sdb: sdb1 sdb2
|
Re: Pogoplug V4 - no SATA or USB February 14, 2021 04:18PM |
Admin Registered: 13 years ago Posts: 19,114 |
|
Re: Pogoplug V4 - no SATA or USB February 15, 2021 12:46AM |
Registered: 9 years ago Posts: 466 |
|
Re: Pogoplug V4 - no SATA or USB February 15, 2021 01:50AM |
Admin Registered: 13 years ago Posts: 19,114 |