Welcome! Log In Create A New Profile

Advanced

Pogoplug V4 - no SATA or USB

Posted by Olek 
Forum List Message List New Topic
Olek
Pogoplug V4 - no SATA or USB
January 02, 2020 06:32PM
Hello gents,

First off, happy New Year 2020 to everyone and their families. May it bring joy and happiness.

I am puzzled by this issue: whenever a USB or a SATA drive is plugged in, nothing happens. There are no messages on the screen, the Pogo seems to be unaware of any devices plugged in.
I tried two known working USB sticks and two SATA drives, one spinner (ext4) and one SSD (this one has NTFS filesystem on it).
The SSD is not mine and is not intended to be used in the Pogo long term.

TBH, I never plugged in the drives before wiping the stock uboot/OS.
Uboot has been upgraded to Bodhi's latest and Debian 5.4.2 has been installed.

Perhaps the USB/SATA is bad on this computer?

Thanks and best regards.
Olek
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
January 03, 2020 01:30AM
Olek,

This rootfs is a basic rootfs. So I did not have automount capabity installed. It is up to individual users to install what they want to use.

But to check the drive being recognized by the system, you can look at dmesg output at the time it is plugged in. And then you can mount it manually.

Later, look in the Wiki thread for how to set up the automount (either install and run autofs, or add udev rules). Post questions if you are not clear about something.

https://forum.doozan.com/read.php?2,23630

Quote

udev

Automount USB drives with udev rules using disk label

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 01/03/2020 01:48AM by bodhi.
Reply Quote
Olek
Re: Pogoplug V4 - no SATA or USB
January 03, 2020 07:34PM
Bodhi,

Thanks for a quick response.
Unfortunately, there is no activity (dmesg) when the USB pendrive is plugged in, not even a brief flash of light from its internal LED.
I verified that the drive is good by plugging it in laptop with Mint running - LED flashes and the OS reports the pendrive as an ext4 one labeled 'rootfs'.
My pogo boots up from an SD card, btw.
For clarity, SATA drive is absent at the moment.

Dmesg: 
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: Pogoplug v4
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 256 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 104860K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 26212K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
[    0.000016] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
[    0.000081] Switching to timer-based delay loop, resolution 6ns
[    0.001267] Console: colour dummy device 80x30
[    0.001347] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
[    0.001390] pid_max: default: 32768 minimum: 301
[    0.001979] LSM: Security Framework initializing
[    0.002250] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002298] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002525] *** VALIDATE tmpfs ***
[    0.003915] *** VALIDATE proc ***
[    0.004361] *** VALIDATE cgroup1 ***
[    0.004401] *** VALIDATE cgroup2 ***
[    0.004585] CPU: Testing write buffer coherency: ok
[    0.007596] Setting up static identity map for 0x100000 - 0x100058
[    0.008047] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.008526] rcu: Hierarchical SRCU implementation.
[    0.012650] devtmpfs: initialized
[    0.021391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.021453] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.021899] xor: measuring software checksum speed
[    0.120187]    arm4regs  :   724.800 MB/sec
[    0.220129]    8regs     :   435.200 MB/sec
[    0.320123]    32regs    :   632.800 MB/sec
[    0.320156] xor: using function: arm4regs (724.800 MB/sec)
[    0.320191] prandom: seed boundary self test passed
[    0.326459] prandom: 100 self tests passed
[    0.326478] pinctrl core: initialized pinctrl subsystem
[    0.328953] NET: Registered protocol family 16
[    0.330265] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.331884] audit: initializing netlink subsys (disabled)
[    0.334158] audit: type=2000 audit(0.330:1): state=initialized audit_enabled=0 res=1
[    0.334357] cpuidle: using governor ladder
[    0.334487] cpuidle: using governor menu
[    0.335276] Feroceon L2: Enabling L2
[    0.335349] Feroceon L2: Cache support initialised.
[    0.344533] No ATAGs?
[    2.560096] random: fast init done
[    7.880885] raid6: int32x8  gen()    70 MB/s
[    8.050469] raid6: int32x8  xor()    44 MB/s
[    8.220347] raid6: int32x4  gen()    72 MB/s
[    8.390232] raid6: int32x4  xor()    46 MB/s
[    8.560623] raid6: int32x2  gen()    93 MB/s
[    8.730261] raid6: int32x2  xor()    63 MB/s
[    8.900237] raid6: int32x1  gen()    75 MB/s
[    9.070306] raid6: int32x1  xor()    46 MB/s
[    9.070323] raid6: using algorithm int32x2 gen() 93 MB/s
[    9.070337] raid6: .... xor() 63 MB/s, rmw enabled
[    9.070350] raid6: using intx1 recovery algorithm
[    9.070740] vgaarb: loaded
[    9.071669] SCSI subsystem initialized
[    9.072036] libata version 3.00 loaded.
[    9.072427] usbcore: registered new interface driver usbfs
[    9.072542] usbcore: registered new interface driver hub
[    9.072671] usbcore: registered new device driver usb
[    9.072985] pps_core: LinuxPPS API ver. 1 registered
[    9.073002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    9.073045] PTP clock support registered
[    9.075237] clocksource: Switched to clocksource orion_clocksource
[   10.797093] *** VALIDATE bpf ***
[   10.797434] VFS: Disk quotas dquot_6.6.0
[   10.797570] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.797723] *** VALIDATE ramfs ***
[   10.812946] thermal_sys: Registered thermal governor 'step_wise'
[   10.813382] NET: Registered protocol family 2
[   10.814700] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[   10.814755] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[   10.814797] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[   10.814830] TCP: Hash tables configured (established 1024 bind 1024)
[   10.815072] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[   10.815119] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[   10.815595] NET: Registered protocol family 1
[   10.816703] RPC: Registered named UNIX socket transport module.
[   10.816722] RPC: Registered udp transport module.
[   10.816735] RPC: Registered tcp transport module.
[   10.816748] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.816770] PCI: CLS 0 bytes, default 32
[   10.817299] Trying to unpack rootfs image as initramfs...
[   12.141074] Freeing initrd memory: 9440K
[   12.141330] NetWinder Floating Point Emulator V0.97 (double precision)
[   12.143309] Initialise system trusted keyrings
[   12.143402] Key type blacklist registered
[   12.143786] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   12.143926] zbud: loaded
[   12.145969] NFS: Registering the id_resolver key type
[   12.146016] Key type id_resolver registered
[   12.146032] Key type id_legacy registered
[   12.146067] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   12.146093] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   12.146782] jffs2: version 2.2. (NAND) (SUMMARY)  \xc2\xa9 2001-2006 Red Hat, Inc.
[   12.147567] *** VALIDATE jffs2 ***
[   12.147593] fuse: init (API version 7.31)
[   12.147623] *** VALIDATE fuse ***
[   12.147643] *** VALIDATE fuse ***
[   12.148224] orangefs_debugfs_init: called with debug mask: :none: :0:
[   12.148532] orangefs_init: module version upstream loaded
[   12.148551] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   12.226845] async_tx: api initialized (async)
[   12.226886] Key type asymmetric registered
[   12.226902] Asymmetric key parser 'x509' registered
[   12.227015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   12.228617] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 47
[   12.228644] kirkwood-pinctrl f1010000.pin-controller: unknown pinctrl group 49
[   12.229221] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   12.231368] mvebu-gpio f1010140.gpio: IRQ index 3 not found
[   12.232268] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   12.232301] pci_bus 0000:00: root bus resource [bus 00-ff]
[   12.232325] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   12.232346] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   12.232368] pci_bus 0000:00: scanning bus
[   12.232498] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   12.232558] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   12.234155] pci_bus 0000:00: fixups for bus
[   12.234175] PCI: bus0: Fast back to back transfers disabled
[   12.234204] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0
[   12.234218] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   12.234249] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1
[   12.234456] pci_bus 0000:01: scanning bus
[   12.234528] pci 0000:01:00.0: [1b73:1009] type 00 class 0x0c0330
[   12.234590] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[   12.234626] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[   12.234660] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit]
[   12.234786] pci 0000:01:00.0: supports D1
[   12.234808] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[   12.234832] pci 0000:01:00.0: PME# disabled
[   12.234895] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[   12.266534] pci_bus 0000:01: fixups for bus
[   12.266553] PCI: bus1: Fast back to back transfers disabled
[   12.266577] pci_bus 0000:01: bus scan returning with max=01
[   12.266596] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   12.266623] pci_bus 0000:00: bus scan returning with max=01
[   12.266899] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff]
[   12.266927] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref]
[   12.266959] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]
[   12.266995] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0010000-0xe0010fff 64bit]
[   12.267030] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0011000-0xe0011fff 64bit]
[   12.267060] pci 0000:00:01.0: PCI bridge to [bus 01]
[   12.267087] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe00fffff]
[   12.267234] pcieport 0000:00:01.0: assign IRQ: got 0
[   12.267263] pcieport 0000:00:01.0: enabling device (0140 -> 0142)
[   12.267305] pcieport 0000:00:01.0: enabling bus mastering
[   12.267367] pci 0000:00:01.0: enabling bus mastering
[   12.267387] pci 0000:01:00.0: enabling device (0140 -> 0142)
[   12.268215] mv_xor f1060800.xor: Marvell shared XOR driver
[   12.326788] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   12.330634] mv_xor f1060900.xor: Marvell shared XOR driver
[   12.396767] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   12.401036] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   12.403089] printk: console [ttyS0] disabled
[   12.403228] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A
[   13.397860] printk: console [ttyS0] enabled
[   13.415678] loop: module loaded
[   13.420002] sata_mv f1080000.sata: version 1.28
[   13.420404] sata_mv f1080000.sata: slots 32 ports 2
[   13.431525] scsi host0: sata_mv
[   13.436284] scsi host1: sata_mv
[   13.440511] ata1: SATA max UDMA/133 irq 32
[   13.445375] ata2: SATA max UDMA/133 irq 32
[   13.452084] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it
[   13.461574] ONFI parameter recovery failed, aborting
[   13.467267] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[   13.474293] nand: Hynix NAND 128MiB 3,3V 8-bit
[   13.479440] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   13.487754] Scanning device for bad blocks
[   13.576852] 5 cmdlinepart partitions found on MTD device orion_nand
[   13.583788] Creating 5 MTD partitions on "orion_nand":
[   13.589642] 0x000000000000-0x000000200000 : "u-boot"
[   13.597486] 0x000000200000-0x000000500000 : "uImage"
[   13.605171] 0x000000500000-0x000000800000 : "uImage2"
[   13.613018] 0x000000800000-0x000001000000 : "failsafe"
[   13.620976] 0x000001000000-0x000008000000 : "root"
[   13.631122] libphy: Fixed MDIO Bus: probed
[   13.637243] libphy: orion_mdio_bus: probed
[   13.664263] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   13.778524] ata1: SATA link down (SStatus 0 SControl F300)
[   14.127074] ata2: SATA link down (SStatus 0 SControl F300)
[   14.386305] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:04:34:44
[   14.395925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.403161] ehci-pci: EHCI PCI platform driver
[   14.408405] ehci-orion: EHCI orion driver
[   14.413406] orion-ehci f1050000.ehci: EHCI Host Controller
[   14.419656] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   14.428281] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[   14.455294] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   14.462416] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[   14.471389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.479306] usb usb1: Product: EHCI Host Controller
[   14.484859] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd
[   14.492169] usb usb1: SerialNumber: f1050000.ehci
[   14.498584] hub 1-0:1.0: USB hub found
[   14.503087] hub 1-0:1.0: 1 port detected
[   14.508853] xhci_hcd 0000:01:00.0: assign IRQ: got 37
[   14.508970] xhci_hcd 0000:01:00.0: enabling bus mastering
[   14.508990] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   14.514922] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[   14.524799] xhci_hcd 0000:01:00.0: hcc params 0x200073a1 hci version 0x100 quirks 0x0000000000080010
[   14.534680] xhci_hcd 0000:01:00.0: enabling Mem-Wr-Inval
[   14.535498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[   14.544434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.552354] usb usb2: Product: xHCI Host Controller
[   14.557938] usb usb2: Manufacturer: Linux 5.4.2-kirkwood-tld-1 xhci-hcd
[   14.565218] usb usb2: SerialNumber: 0000:01:00.0
[   14.571504] hub 2-0:1.0: USB hub found
[   14.576085] hub 2-0:1.0: 2 ports detected
[   14.581715] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   14.587736] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[   14.595890] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[   14.603023] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[   14.612056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[   14.621220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.629150] usb usb3: Product: xHCI Host Controller
[   14.634711] usb usb3: Manufacturer: Linux 5.4.2-kirkwood-tld-1 xhci-hcd
[   14.642023] usb usb3: SerialNumber: 0000:01:00.0
[   14.648274] hub 3-0:1.0: USB hub found
[   14.652763] hub 3-0:1.0: 2 ports detected
[   14.658716] usbcore: registered new interface driver usb-storage
[   14.666046] mousedev: PS/2 mouse device common for all mice
[   14.925325] usb usb2-port1: over-current condition
[   15.005331] usb usb3-port1: over-current condition
[   15.165337] usb usb2-port2: over-current condition
[   15.245331] usb usb3-port2: over-current condition
[   15.685286] rtc-mv f1010300.rtc: internal RTC not ticking
[   15.691623] i2c /dev entries driver
[   15.696834] device-mapper: uevent: version 1.0.3
[   15.702601] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[   15.712418] device-mapper: multipath round-robin: version 1.2.0 loaded
[   15.719723] device-mapper: multipath queue-length: version 0.2.0 loaded
[   15.727076] device-mapper: multipath service-time: version 0.3.0 loaded
[   15.734479] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   15.741283] device-mapper: raid: Loading target version 1.14.0
[   15.749637] hidraw: raw HID events driver (C) Jiri Kosina
[   15.756189] exFAT: Version 1.3.0
[   15.760242] drop_monitor: Initializing network drop monitor service
[   15.767643] NET: Registered protocol family 17
[   15.773183] Key type dns_resolver registered
[   15.778841] registered taskstats version 1
[   15.783618] Loading compiled-in X.509 certificates
[   15.789289] zswap: loaded using pool lzo/zbud
[   15.794674] Key type ._fscrypt registered
[   15.799418] Key type .fscrypt registered
[   15.951072] Key type big_key registered
[   16.021131] Key type encrypted registered
[   16.030020] hctosys: unable to open rtc device (rtc0)
[   16.040953] Freeing unused kernel memory: 1024K
[   16.066535] Checked W+X mappings: passed, no W+X pages found
[   16.072868] Run /init as init process
[   17.244867] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[   17.567871] mvsdio f1090000.mvsdio: Got CD GPIO
[   17.649935] mmc0: host does not support reading read-only switch, assuming write-enable
[   17.667271] mmc0: new high speed SDHC card at address 59b4
[   17.928263] mmcblk0: mmc0:59b4 00000 14.9 GiB 
[   17.937494]  mmcblk0: p1
[   29.879403] EXT4-fs (mmcblk0p1): mounting ext3 file system using the ext4 subsystem
[   29.928268] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   34.190481] systemd-udevd[379]: Using default interface naming scheme 'v240'.
[   34.463415] systemd-udevd[379]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   34.788878] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   34.944016] watchdog: f1020300.watchdog-timer: falling back to default timeout (25)
[   35.017277] orion_wdt f1020300.watchdog-timer: IRQ index 1 not found
[   35.095792] orion_wdt: Initial timeout 25 sec
[   35.402757] systemd-udevd[398]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   35.974675] marvell-cesa f1030000.crypto: CESA device successfully registered
[   38.543721] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[   42.960944] random: dd: uninitialized urandom read (512 bytes read)
[   46.135870] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[   52.424141] NET: Registered protocol family 10
[   52.431706] Segment Routing with IPv6
[   58.045270] sched: RT throttling activated
[   62.249460] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[   62.293609] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[   62.581933] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[   63.479309] urandom_read: 1 callbacks suppressed
[   63.479323] random: fail2ban-client: uninitialized urandom read (24 bytes read)
[   65.434061] random: fail2ban-client: uninitialized urandom read (24 bytes read)
[   67.951262] random: fail2ban-server: uninitialized urandom read (24 bytes read)
[   69.861706] random: fail2ban-server: uninitialized urandom read (256 bytes read)
[   71.985401] random: crng init done

fdisk -l: 
fdisk -l
Disk /dev/mtdblock0: 2 MiB, 2097152 bytes, 4096 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock1: 3 MiB, 3145728 bytes, 6144 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock2: 3 MiB, 3145728 bytes, 6144 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock3: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mtdblock4: 112 MiB, 117440512 bytes, 229376 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/mmcblk0: 14.9 GiB, 16021192704 bytes, 31291392 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xfd637859

Device         Boot Start      End  Sectors  Size Id Type
/dev/mmcblk0p1 *     2048 31291391 31289344 14.9G 83 Linux

ls -l /dev: 
drwxr-xr-x 12 root root        2880 Dec 31  1969 .
drwxr-xr-x 21 root root        4096 Feb 16  2015 ..
lrwxrwxrwx  1 root root           9 Dec 31  1969 MAKEDEV -> /bin/true
crw-------  1 root root     10, 235 Dec 31  1969 autofs
drwxr-xr-x  2 root root         340 Dec 31  1969 block
crw-------  1 root root     10, 234 Dec 31  1969 btrfs-control
drwxr-xr-x  3 root root          60 Dec 31  1969 bus
drwxr-xr-x  2 root root        2260 Dec 31  1969 char
crw-------  1 root root      5,   1 Dec 31  1969 console
crw-------  1 root root     10,  62 Dec 31  1969 cpu_dma_latency
crw-------  1 root root     10, 203 Dec 31  1969 cuse
drwxr-xr-x  7 root root         140 Dec 31  1969 disk
lrwxrwxrwx  1 root root          13 Dec 31  1969 fd -> /proc/self/fd
crw-rw-rw-  1 root root      1,   7 Dec 31  1969 full
crw-rw-rw-  1 root root     10, 229 Dec 31  1969 fuse
crw-------  1 root root    254,   0 Dec 31  1969 gpiochip0
crw-------  1 root root    254,   1 Dec 31  1969 gpiochip1
drwxr-xr-x  3 root root         100 Dec 31  1969 input
crw-r--r--  1 root root      1,  11 Dec 31  1969 kmsg
srw-rw-rw-  1 root root           0 Dec 31  1969 log
crw-rw----  1 root disk     10, 237 Dec 31  1969 loop-control
brw-rw----  1 root disk      7,   0 Dec 31  1969 loop0
brw-rw----  1 root disk      7,   1 Dec 31  1969 loop1
brw-rw----  1 root disk      7,   2 Dec 31  1969 loop2
brw-rw----  1 root disk      7,   3 Dec 31  1969 loop3
brw-rw----  1 root disk      7,   4 Dec 31  1969 loop4
brw-rw----  1 root disk      7,   5 Dec 31  1969 loop5
brw-rw----  1 root disk      7,   6 Dec 31  1969 loop6
brw-rw----  1 root disk      7,   7 Dec 31  1969 loop7
drwxr-xr-x  2 root root          60 Dec 31  1969 mapper
crw-r-----  1 root kmem      1,   1 Dec 31  1969 mem
brw-rw----  1 root disk    179,   0 Dec 31  1969 mmcblk0
brw-rw----  1 root disk    179,   1 Dec 31  1969 mmcblk0p1
crw-------  1 root root     90,   0 Dec 31  1969 mtd0
crw-------  1 root root     90,   1 Dec 31  1969 mtd0ro
crw-------  1 root root     90,   2 Dec 31  1969 mtd1
crw-------  1 root root     90,   3 Dec 31  1969 mtd1ro
crw-------  1 root root     90,   4 Dec 31  1969 mtd2
crw-------  1 root root     90,   5 Dec 31  1969 mtd2ro
crw-------  1 root root     90,   6 Dec 31  1969 mtd3
crw-------  1 root root     90,   7 Dec 31  1969 mtd3ro
crw-------  1 root root     90,   8 Dec 31  1969 mtd4
crw-------  1 root root     90,   9 Dec 31  1969 mtd4ro
brw-rw----  1 root disk     31,   0 Dec 31  1969 mtdblock0
brw-rw----  1 root disk     31,   1 Dec 31  1969 mtdblock1
brw-rw----  1 root disk     31,   2 Dec 31  1969 mtdblock2
brw-rw----  1 root disk     31,   3 Dec 31  1969 mtdblock3
brw-rw----  1 root disk     31,   4 Dec 31  1969 mtdblock4
drwxr-xr-x  2 root root          60 Dec 31  1969 net
crw-rw-rw-  1 root root      1,   3 Dec 31  1969 null
crw-r-----  1 root kmem      1,   4 Dec 31  1969 port
crw-------  1 root root    108,   0 Dec 31  1969 ppp
crw-------  1 root root     10,   1 Dec 31  1969 psaux
crw-rw-rw-  1 root tty       5,   2 Jan  3 19:29 ptmx
drwxr-xr-x  2 root root           0 Dec 31  1969 pts
crw-rw-rw-  1 root root      1,   8 Dec 31  1969 random
drwxrwxrwt  2 root root          60 Dec 31  1969 shm
crw-------  1 root root     10, 231 Dec 31  1969 snapshot
drwxr-xr-x  2 root root          80 Dec 31  1969 snd
lrwxrwxrwx  1 root root          15 Dec 31  1969 stderr -> /proc/self/fd/2
lrwxrwxrwx  1 root root          15 Dec 31  1969 stdin -> /proc/self/fd/0
lrwxrwxrwx  1 root root          15 Dec 31  1969 stdout -> /proc/self/fd/1
crw-rw-rw-  1 root tty       5,   0 Dec 31  1969 tty
crw--w----  1 root tty       4,   0 Dec 31  1969 tty0
crw--w----  1 root tty       4,   1 Dec 31  1969 tty1
crw--w----  1 root tty       4,  10 Dec 31  1969 tty10
crw--w----  1 root tty       4,  11 Dec 31  1969 tty11
crw--w----  1 root tty       4,  12 Dec 31  1969 tty12
crw--w----  1 root tty       4,  13 Dec 31  1969 tty13
crw--w----  1 root tty       4,  14 Dec 31  1969 tty14
crw--w----  1 root tty       4,  15 Dec 31  1969 tty15
crw--w----  1 root tty       4,  16 Dec 31  1969 tty16
crw--w----  1 root tty       4,  17 Dec 31  1969 tty17
crw--w----  1 root tty       4,  18 Dec 31  1969 tty18
crw--w----  1 root tty       4,  19 Dec 31  1969 tty19
crw--w----  1 root tty       4,   2 Dec 31  1969 tty2
crw--w----  1 root tty       4,  20 Dec 31  1969 tty20
crw--w----  1 root tty       4,  21 Dec 31  1969 tty21
crw--w----  1 root tty       4,  22 Dec 31  1969 tty22
crw--w----  1 root tty       4,  23 Dec 31  1969 tty23
crw--w----  1 root tty       4,  24 Dec 31  1969 tty24
crw--w----  1 root tty       4,  25 Dec 31  1969 tty25
crw--w----  1 root tty       4,  26 Dec 31  1969 tty26
crw--w----  1 root tty       4,  27 Dec 31  1969 tty27
crw--w----  1 root tty       4,  28 Dec 31  1969 tty28
crw--w----  1 root tty       4,  29 Dec 31  1969 tty29
crw--w----  1 root tty       4,   3 Dec 31  1969 tty3
crw--w----  1 root tty       4,  30 Dec 31  1969 tty30
crw--w----  1 root tty       4,  31 Dec 31  1969 tty31
crw--w----  1 root tty       4,  32 Dec 31  1969 tty32
crw--w----  1 root tty       4,  33 Dec 31  1969 tty33
crw--w----  1 root tty       4,  34 Dec 31  1969 tty34
crw--w----  1 root tty       4,  35 Dec 31  1969 tty35
crw--w----  1 root tty       4,  36 Dec 31  1969 tty36
crw--w----  1 root tty       4,  37 Dec 31  1969 tty37
crw--w----  1 root tty       4,  38 Dec 31  1969 tty38
crw--w----  1 root tty       4,  39 Dec 31  1969 tty39
crw--w----  1 root tty       4,   4 Dec 31  1969 tty4
crw--w----  1 root tty       4,  40 Dec 31  1969 tty40
crw--w----  1 root tty       4,  41 Dec 31  1969 tty41
crw--w----  1 root tty       4,  42 Dec 31  1969 tty42
crw--w----  1 root tty       4,  43 Dec 31  1969 tty43
crw--w----  1 root tty       4,  44 Dec 31  1969 tty44
crw--w----  1 root tty       4,  45 Dec 31  1969 tty45
crw--w----  1 root tty       4,  46 Dec 31  1969 tty46
crw--w----  1 root tty       4,  47 Dec 31  1969 tty47
crw--w----  1 root tty       4,  48 Dec 31  1969 tty48
crw--w----  1 root tty       4,  49 Dec 31  1969 tty49
crw--w----  1 root tty       4,   5 Dec 31  1969 tty5
crw--w----  1 root tty       4,  50 Dec 31  1969 tty50
crw--w----  1 root tty       4,  51 Dec 31  1969 tty51
crw--w----  1 root tty       4,  52 Dec 31  1969 tty52
crw--w----  1 root tty       4,  53 Dec 31  1969 tty53
crw--w----  1 root tty       4,  54 Dec 31  1969 tty54
crw--w----  1 root tty       4,  55 Dec 31  1969 tty55
crw--w----  1 root tty       4,  56 Dec 31  1969 tty56
crw--w----  1 root tty       4,  57 Dec 31  1969 tty57
crw--w----  1 root tty       4,  58 Dec 31  1969 tty58
crw--w----  1 root tty       4,  59 Dec 31  1969 tty59
crw--w----  1 root tty       4,   6 Dec 31  1969 tty6
crw--w----  1 root tty       4,  60 Dec 31  1969 tty60
crw--w----  1 root tty       4,  61 Dec 31  1969 tty61
crw--w----  1 root tty       4,  62 Dec 31  1969 tty62
crw--w----  1 root tty       4,  63 Dec 31  1969 tty63
crw--w----  1 root tty       4,   7 Dec 31  1969 tty7
crw--w----  1 root tty       4,   8 Dec 31  1969 tty8
crw--w----  1 root tty       4,   9 Dec 31  1969 tty9
crw--w----  1 root tty       4,  64 Dec 31  1969 ttyS0
crw-rw----  1 root dialout   4,  65 Dec 31  1969 ttyS1
crw-------  1 root root     10,  61 Dec 31  1969 ubi_ctrl
crw-------  1 root root     10, 239 Dec 31  1969 uhid
crw-------  1 root root     10, 223 Dec 31  1969 uinput
crw-rw-rw-  1 root root      1,   9 Dec 31  1969 urandom
crw-rw----  1 root tty       7,   0 Dec 31  1969 vcs
crw-rw----  1 root tty       7,   1 Dec 31  1969 vcs1
crw-rw----  1 root tty       7, 128 Dec 31  1969 vcsa
crw-rw----  1 root tty       7, 129 Dec 31  1969 vcsa1
crw-rw----  1 root tty       7,  64 Dec 31  1969 vcsu
crw-rw----  1 root tty       7,  65 Dec 31  1969 vcsu1
crw-------  1 root root     10,  63 Dec 31  1969 vga_arbiter
crw-------  1 root root     10, 137 Dec 31  1969 vhci
crw-------  1 root root     10, 130 Dec 31  1969 watchdog
crw-------  1 root root    248,   0 Dec 31  1969 watchdog0
crw-rw-rw-  1 root root      1,   5 Dec 31  1969 zero

Anything else I should try?
Best regards.
O.
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
January 03, 2020 10:48PM
Olek,

There are 3 USB ports on this Pogo V4, the top one is USB 2.0, the rear 2 are USB 3.0. Try all 3 ports, see if any got a system response.

Note that currently, only the USB 2.0 port can be used for booting (u-boot limitation). But all 3 should work fine.

And also see what the USB tree look like: 

lsusb -vvv

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Olek
Re: Pogoplug V4 - no SATA or USB
January 03, 2020 11:19PM
Bodhi,

With the USB stick plugged in the top, here is the output of the 
lsusb -vvv
command: 

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.04
  iManufacturer           3 Linux 5.4.2-kirkwood-tld-1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 f1050000.ehci
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             1
  wHubCharacteristic 0x0009
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         3 
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            5.04
  iManufacturer           3 Linux 5.4.2-kirkwood-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:01:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x001f
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0
Hub Descriptor:
  bLength              12
  bDescriptorType      42
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  bHubDecLat          0.0 micro seconds
  wHubDelay             0 nano seconds
  DeviceRemovable    0x00
 Hub Port Status:
   Port 1: 0000.0088 5Gbps SS.disabled oc
   Port 2: 0000.0088 5Gbps SS.disabled oc
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength       0x000f
  bNumDeviceCaps          1
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x0008
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   3
      Lowest fully-functional device speed is SuperSpeed (5Gbps)
    bU1DevExitLat           0 micro seconds
    bU2DevExitLat           0 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            5.04
  iManufacturer           3 Linux 5.4.2-kirkwood-tld-1 xhci-hcd
  iProduct                2 xHCI Host Controller
  iSerial                 1 0000:01:00.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0019
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
    TT think time 8 FS bits
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0008 oc
   Port 2: 0000.0008 oc
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Thanks in advance!
Olek.
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
January 04, 2020 01:47AM
Olek,

Since you have serial console, try to initialize the drives in uboot. Plug in the usb drive in top port. HDD drive in its slot.

BTW, what type of USB are you using (brand, 2 or 3, capacity), and HDD (brand, size, capacity)?

Power up, interrupt serial console, and 

usb start
ide reset

If the output look good 

usb part
ide part


Please post the log here!

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Olek
Re: Pogoplug V4 - no SATA or USB
January 04, 2020 09:38AM
Bodhi,

Mint on laptop reports the USB stick as: 

Bus 002 Device 004: ID 058f:6387 Alcor Micro Corp. Flash Drive
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x058f Alcor Micro Corp.
  idProduct          0x6387 Flash Drive
  bcdDevice            1.0b
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 13062586130113
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

The output of the usb start command: 
Pogov4> usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Pogov4>

And the ide start: 
Pogov4> ide reset

Reset IDE: ide_preinit failed
Pogov4>




The SATA HD is a WD2500BEKT by Western Digital.
USB stick is plugged in at the top of the device.

Thanks!
Olek.
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
January 04, 2020 11:24PM
Olek,

I think you should check the power supply (using a meter). Or if you have another power supply with compatible barrel jack, and voltage, and 2A, try using that.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Olek
Re: Pogoplug V4 - no SATA or USB
January 10, 2020 06:03PM
Bodhi,

Thank you again.

This project is de-prioritized for now.
There is one puzzling area that I plan to take a closer look at: 
[   14.925325] usb usb2-port1: over-current condition
[   15.005331] usb usb3-port1: over-current condition
[   15.165337] usb usb2-port2: over-current condition
[   15.245331] usb usb3-port2: over-current condition

Take care!
Reply Quote
netrunner
Re: Pogoplug V4 - no SATA or USB
February 14, 2021 06:44AM
hello, I had the same issue with 2 different pogoplug v4 with either openwrt or debian, and after reading this post i checked the power supply, i was using 5v while it should have been 12v, once changed usb and sata device appeared.

thanks again, your work is gold 

[   12.773706] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 603A PQ: 0 ANSI: 5
[   12.828229] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[   12.837760] sd 0:0:0:0: [sda] Write Protect is off
[   12.842549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.842714] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   12.857859]  sda: sda1 sda2 sda3 sda5 sda6 sda7 sda8 sda9
[   12.869204] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.888701] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.684455] scsi 1:0:0:0: Direct-Access     SanDisk  Ultra            1.00 PQ: 0 ANSI: 6
[   13.704321] sd 1:0:0:0: [sdb] 121307136 512-byte logical blocks: (62.1 GB/57.8 GiB)
[   13.712462] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   13.718146] sd 1:0:0:0: [sdb] Write Protect is off
[   13.722930] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   13.728542] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   13.755602]  sdb: sdb1 sdb2
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
February 14, 2021 04:18PM
netrunner,

Cool!

It happens often. Once during testing, I burnt a 5V router box plugging in a 12V power supply :)) Since that I labeled all my power supply cords at the barrel connector.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
rayknight
Re: Pogoplug V4 - no SATA or USB
February 15, 2021 12:46AM
bodhi Wrote:
-------------------------------------------------------
> netrunner,
>
> Cool!
>
> It happens often. Once during testing, I burnt a
> 5V router box plugging in a 12V power supply :))
> Since that I labeled all my power supply cords at
> the barrel connector.

This is issue is what I consider an engineering failure! The Japan Electronics and Information Technology Industries Association has attempted to standardize barrel connectors to help prevent this (see https://en.wikipedia.org/wiki/EIAJ_connector), but it appears to have little actual support in the industry. If they followed the standard a 5V power adapter would use a 4mm plug (EIAJ-02) instead of the 5.5mm plug (EIAJ-04) which is correct for 12V.

Ray
Reply Quote
bodhi
Re: Pogoplug V4 - no SATA or USB
February 15, 2021 01:50AM
> This is issue is what I consider an engineering
> failure!

The Verizon/Actiontec router did it correctly with the smaller size barrel jack for 5V. Seagate also used larger barrel jack for the GoFlex and Dockstar 12V boxes, never the smaller one.

IIRC, Cisco commercial routers have the worst design (in that I can accidentlly plug in the 12V large barrel jack and fried it!). So I considered it not worthwhile to keep those old routers going to landfill :))

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Reply Quote
Newer Topic Older Topic
Author:

Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: