Unable to use LABEL for root fs on D-Link DNS-320 B1 January 07, 2020 01:59PM |
Registered: 10 years ago Posts: 13 |
bootargs=console=ttyS0,115200 root=/dev/sda1 usb-storage.delay_use=0 rootdelay=1 rw bootcmd=usb reset; ext2load usb 0:1 0xa00000 /boot/uImage; ext2load usb 0:1 0xf00000 /boot/uInitrd; bootm 0xa00000 0xf00000
[ 12.591782][ T1] VFS: Cannot open root device "sda1" or unknown-block(8,1): error -6 [ 12.599821][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 12.608930][ T1] 1f00 1024 mtdblock0 [ 12.608935][ T1] (driver?) [ 12.616886][ T1] 1f01 5120 mtdblock1 [ 12.616890][ T1] (driver?) [ 12.624834][ T1] 1f02 5120 mtdblock2 [ 12.624837][ T1] (driver?) [ 12.632735][ T1] 1f03 102400 mtdblock3 [ 12.632738][ T1] (driver?) [ 12.640660][ T1] 1f04 10240 mtdblock4 [ 12.640663][ T1] (driver?) [ 12.648582][ T1] 1f05 5120 mtdblock5 [ 12.648585][ T1] (driver?) [ 12.656500][ T1] 1f06 2048 mtdblock6 [ 12.656504][ T1] (driver?) [ 12.664422][ T1] 0800 3907018584 sda [ 12.664427][ T1] driver: sd [ 12.671891][ T1] 0810 1954176 sdb [ 12.671895][ T1] driver: sd [ 12.679383][ T1] 0811 1952768 sdb1 00046dc1-01 [ 12.679386][ T1] [ 12.687133][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) [ 12.696058][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.2-kirkwood-tld-1 #1.0 [ 12.703854][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 12.710814][ T1] [<8010f5a8>] (unwind_backtrace) from [<8010b930>] (show_stack+0x10/0x14) [ 12.719227][ T1] [<8010b930>] (show_stack) from [<80119bb8>] (panic+0xfc/0x328) [ 12.726771][ T1] [<80119bb8>] (panic) from [<80e01550>] (mount_block_root+0x1f8/0x290) [ 12.734916][ T1] [<80e01550>] (mount_block_root) from [<80e016d8>] (mount_root+0xf0/0x130) [ 12.743409][ T1] [<80e016d8>] (mount_root) from [<80e01860>] (prepare_namespace+0x148/0x188) [ 12.752075][ T1] [<80e01860>] (prepare_namespace) from [<80e010d0>] (kernel_init_freeable+0x174/0) [ 12.761609][ T1] [<80e010d0>] (kernel_init_freeable) from [<809c036c>] (kernel_init+0x8/0x10c) [ 12.770456][ T1] [<809c036c>] (kernel_init) from [<801010e0>] (ret_from_fork+0x14/0x34) [ 12.778686][ T1] Exception stack(0x87883fb0 to 0x87883ff8) [ 12.784409][ T1] 3fa0: 00000000 00000000 00000000 00000000 [ 12.793242][ T1] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.802078][ T1] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 12.809362][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-blo-
root@debian:~# tune2fs -L rootfs /dev/sda1 tune2fs 1.44.5 (15-Dec-2018) root@debian:~# blkid /dev/sda1: LABEL="rootfs" UUID="f4814f03-f575-4a5b-85f4-6e06ade640ea" TYPE="ext2" PARTUUID="00046dc1-01"
bootargs=console=ttyS0,115200 root=LABEL=rootfs usb-storage.delay_use=0 rootdelay=1 rw
## Booting image at 00a00000 ... Image Name: Linux-5.4.2-kirkwood-tld-1 Created: 1970-01-01 0:04:39 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5103948 Bytes = 4.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00f00000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2020-01-07 1:58:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 89 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-320L [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] INITRD: 0x00f00000+0x00944000 overlaps in-use memory region - disabling initrd [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs usb-storage.delay_usw [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 114296K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata,) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idls [ 0.000010][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000055][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.000933][ T0] Console: colour dummy device 80x30 [ 0.000988][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.3) [ 0.001020][ T0] pid_max: default: 32768 minimum: 301 [ 0.001452][ T0] LSM: Security Framework initializing [ 0.001645][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001679][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001836][ T0] *** VALIDATE tmpfs *** [ 0.002819][ T0] *** VALIDATE proc *** [ 0.003136][ T0] *** VALIDATE cgroup1 *** [ 0.003164][ T0] *** VALIDATE cgroup2 *** [ 0.003292][ T0] CPU: Testing write buffer coherency: ok [ 0.005296][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.005628][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.005957][ T1] rcu: Hierarchical SRCU implementation. [ 0.008874][ T1] devtmpfs: initialized [ 0.015926][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911s [ 0.015966][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.016268][ T1] xor: measuring software checksum speed [ 0.110134][ T1] arm4regs : 906.800 MB/sec [ 0.210082][ T1] 8regs : 544.400 MB/sec [ 0.310082][ T1] 32regs : 791.600 MB/sec [ 0.310103][ T1] xor: using function: arm4regs (906.800 MB/sec) [ 0.310129][ T1] prandom: seed boundary self test passed [ 0.315139][ T1] prandom: 100 self tests passed [ 0.315155][ T1] pinctrl core: initialized pinctrl subsystem [ 0.316883][ T1] NET: Registered protocol family 16 [ 0.317660][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.318834][ T1] audit: initializing netlink subsys (disabled) [ 0.320517][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 [ 0.320650][ T1] cpuidle: using governor ladder [ 0.320737][ T1] cpuidle: using governor menu [ 0.321344][ T1] Feroceon L2: Enabling L2 [ 0.321394][ T1] Feroceon L2: Cache support initialised. [ 0.328573][ T1] No ATAGs? [ 2.560063][ C0] random: fast init done [ 6.380919][ T1] raid6: int32x8 gen() 88 MB/s [ 6.550519][ T1] raid6: int32x8 xor() 55 MB/s [ 6.720592][ T1] raid6: int32x4 gen() 91 MB/s [ 6.890175][ T1] raid6: int32x4 xor() 58 MB/s [ 7.060084][ T1] raid6: int32x2 gen() 116 MB/s [ 7.230266][ T1] raid6: int32x2 xor() 79 MB/s [ 7.400645][ T1] raid6: int32x1 gen() 94 MB/s [ 7.570478][ T1] raid6: int32x1 xor() 58 MB/s [ 7.570491][ T1] raid6: using algorithm int32x2 gen() 116 MB/s [ 7.570502][ T1] raid6: .... xor() 79 MB/s, rmw enabled [ 7.570512][ T1] raid6: using intx1 recovery algorithm [ 7.570809][ T1] vgaarb: loaded [ 7.571492][ T1] SCSI subsystem initialized [ 7.572074][ T1] usbcore: registered new interface driver usbfs [ 7.572150][ T1] usbcore: registered new interface driver hub [ 7.572250][ T1] usbcore: registered new device driver usb [ 7.572505][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.572519][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@l> [ 7.572551][ T1] PTP clock support registered [ 7.574228][ T1] clocksource: Switched to clocksource orion_clocksource [ 8.945792][ T1] *** VALIDATE bpf *** [ 8.946052][ T1] VFS: Disk quotas dquot_6.6.0 [ 8.946152][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.946265][ T1] *** VALIDATE ramfs *** [ 8.957945][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 8.958277][ T1] NET: Registered protocol family 2 [ 8.959273][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 8.959314][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959343][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959369][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 8.959518][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959551][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959818][ T1] NET: Registered protocol family 1 [ 8.960623][ T1] RPC: Registered named UNIX socket transport module. [ 8.960639][ T1] RPC: Registered udp transport module. [ 8.960650][ T1] RPC: Registered tcp transport module. [ 8.960660][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.960677][ T1] PCI: CLS 0 bytes, default 32 [ 8.961246][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.962618][ T1] Initialise system trusted keyrings [ 8.962676][ T1] Key type blacklist registered [ 8.962950][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.963087][ T1] zbud: loaded [ 8.964547][ T1] NFS: Registering the id_resolver key type [ 8.964586][ T1] Key type id_resolver registered [ 8.964598][ T1] Key type id_legacy registered [ 8.964623][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 8.964643][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.965156][ T1] jffs2: version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc. [ 8.965659][ T1] *** VALIDATE jffs2 *** [ 8.965679][ T1] fuse: init (API version 7.31) [ 8.965704][ T1] *** VALIDATE fuse *** [ 8.965720][ T1] *** VALIDATE fuse *** [ 8.966179][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 8.966431][ T1] orangefs_init: module version upstream loaded [ 8.966446][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.011660][ T1] async_tx: api initialized (async) [ 9.011686][ T1] Key type asymmetric registered [ 9.011698][ T1] Asymmetric key parser 'x509' registered [ 9.011766][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 9.013517][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.015328][ T1] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 9.016144][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.075459][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.078487][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.135446][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.138804][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.140319][ T1] printk: console [ttyS0] disabled [ 9.140426][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a A [ 9.921360][ T1] printk: console [ttyS0] enabled [ 9.927062][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 10416666) is a A [ 9.946435][ T1] loop: module loaded [ 9.950948][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 9.960518][ T1] scsi host0: sata_mv [ 9.965085][ T1] scsi host1: sata_mv [ 9.969212][ T1] ata1: SATA max UDMA/133 irq 33 [ 9.973992][ T1] ata2: SATA max UDMA/133 irq 33 [ 9.980149][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 9.987269][ T1] nand: Hynix H27U1G8F2BTR-BC [ 9.991781][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.000059][ T1] Scanning device for bad blocks [ 10.092114][ T1] Bad eraseblock 783 at 0x0000061e0000 [ 10.124200][ T1] 7 fixed-partitions partitions found on MTD device orion_nand [ 10.131590][ T1] Creating 7 MTD partitions on "orion_nand": [ 10.137427][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 10.144778][ T1] 0x000000100000-0x000000600000 : "uImage" [ 10.152029][ T1] 0x000000600000-0x000000b00000 : "ramdisk" [ 10.159374][ T1] 0x000000b00000-0x000006f00000 : "image" [ 10.167040][ T1] 0x000006f00000-0x000007900000 : "mini firmware" [ 10.174931][ T1] 0x000007900000-0x000007e00000 : "config" [ 10.182171][ T1] 0x000007e00000-0x000008000000 : "my-dlink" [ 10.191071][ T1] libphy: Fixed MDIO Bus: probed [ 10.196903][ T1] libphy: orion_mdio_bus: probed [ 10.203179][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.212540][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:022 [ 10.222206][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.229524][ T1] ehci-pci: EHCI PCI platform driver [ 10.234785][ T1] ehci-orion: EHCI orion driver [ 10.239694][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.245966][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 10.254597][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 10.284261][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.291293][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 10.300278][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.308209][ T118] ata1: SATA link down (SStatus 0 SControl F300) [ 10.314397][ T1] usb usb1: Product: EHCI Host Controller [ 10.319947][ T1] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 10.327317][ T1] usb usb1: SerialNumber: f1050000.ehci [ 10.333484][ T1] hub 1-0:1.0: USB hub found [ 10.338155][ T1] hub 1-0:1.0: 1 port detected [ 10.343613][ T1] usbcore: registered new interface driver usb-storage [ 10.350788][ T1] mousedev: PS/2 mouse device common for all mice [ 10.665935][ T120] ata2: SATA link down (SStatus 0 SControl F300) [ 10.704271][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 10.905260][ T15] usb 1-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 1.26 [ 10.914119][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.921964][ T15] usb 1-1: Product: Cruzer Micro [ 10.926764][ T15] usb 1-1: Manufacturer: SanDisk [ 10.931537][ T15] usb 1-1: SerialNumber: 20043515700598026046 [ 10.938343][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.945652][ T15] scsi host2: usb-storage 1-1:1.0 [ 10.952122][ T22] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 [ 10.962805][ T7] sd 2:0:0:0: [sda] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 10.972664][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 10.978913][ T7] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPA [ 10.994036][ T7] sda: sda1 [ 11.000796][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 11.444264][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 11.450530][ T1] i2c /dev entries driver [ 11.455509][ T1] device-mapper: uevent: version 1.0.3 [ 11.461129][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 11.470745][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 11.478019][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 11.485348][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 11.492695][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 11.499492][ T1] device-mapper: raid: Loading target version 1.14.0 [ 11.507769][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 11.514145][ T1] exFAT: Version 1.3.0 [ 11.518207][ T1] drop_monitor: Initializing network drop monitor service [ 11.525496][ T1] NET: Registered protocol family 17 [ 11.530901][ T1] Key type dns_resolver registered [ 11.536423][ T1] registered taskstats version 1 [ 11.541197][ T1] Loading compiled-in X.509 certificates [ 11.546810][ T1] zswap: loaded using pool lzo/zbud [ 11.552115][ T1] Key type ._fscrypt registered [ 11.556836][ T1] Key type .fscrypt registered [ 11.581374][ T1] Key type big_key registered [ 11.589979][ T1] Key type encrypted registered [ 11.597737][ T1] hctosys: unable to open rtc device (rtc0) [ 11.603946][ T1] Waiting 1 sec before mounting root device... [ 12.644451][ T1] md: Waiting for all devices to be available before autodetect [ 12.651905][ T1] md: If you don't use raid, use raid=noautodetect [ 12.659170][ T1] md: Autodetecting RAID arrays. [ 12.663940][ T1] md: autorun ... [ 12.667489][ T1] md: ... autorun DONE. [ 12.671722][ T1] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 12.680447][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 12.689556][ T1] 1f00 1024 mtdblock0 [ 12.689560][ T1] (driver?) [ 12.697516][ T1] 1f01 5120 mtdblock1 [ 12.697519][ T1] (driver?) [ 12.705466][ T1] 1f02 5120 mtdblock2 [ 12.705470][ T1] (driver?) [ 12.713366][ T1] 1f03 102400 mtdblock3 [ 12.713369][ T1] (driver?) [ 12.721290][ T1] 1f04 10240 mtdblock4 [ 12.721294][ T1] (driver?) [ 12.729213][ T1] 1f05 5120 mtdblock5 [ 12.729217][ T1] (driver?) [ 12.737131][ T1] 1f06 2048 mtdblock6 [ 12.737134][ T1] (driver?) [ 12.745054][ T1] 0800 1954176 sda [ 12.745058][ T1] driver: sd [ 12.752522][ T1] 0801 1952768 sda1 00046dc1-01 [ 12.752525][ T1] [ 12.760273][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 12.769199][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.2-kirkwood-tld-1 #1.0 [ 12.776993][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 12.783954][ T1] [<8010f5a8>] (unwind_backtrace) from [<8010b930>] (show_stack+0x10/0x14) [ 12.792368][ T1] [<8010b930>] (show_stack) from [<80119bb8>] (panic+0xfc/0x328) [ 12.799911][ T1] [<80119bb8>] (panic) from [<80e01550>] (mount_block_root+0x1f8/0x290) [ 12.808057][ T1] [<80e01550>] (mount_block_root) from [<80e016d8>] (mount_root+0xf0/0x130) [ 12.816548][ T1] [<80e016d8>] (mount_root) from [<80e01860>] (prepare_namespace+0x148/0x188) [ 12.825215][ T1] [<80e01860>] (prepare_namespace) from [<80e010d0>] (kernel_init_freeable+0x174/0) [ 12.834751][ T1] [<80e010d0>] (kernel_init_freeable) from [<809c036c>] (kernel_init+0x8/0x10c) [ 12.843595][ T1] [<809c036c>] (kernel_init) from [<801010e0>] (ret_from_fork+0x14/0x34) [ 12.851818][ T1] Exception stack(0x87883fb0 to 0x87883ff8) [ 12.857540][ T1] 3fa0: 00000000 00000000 00000000 00000000 [ 12.866373][ T1] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.875210][ T1] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 12.882493][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-blo-
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 07, 2020 05:36PM |
Registered: 10 years ago Posts: 13 |
Marvell>> printenv baudrate=115200 loads_echo=0 ipaddr=2.66.66.201 serverip=2.66.66.32 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root) MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; ethaddr=00:50:43:00:02:02 ethmtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes ethact=egiga0 bootargs_orig=root=/dev/ram=console=ttyS0,115200 :::DB88FXX81:egiga0:none bootcmd_orig=nand=read.e 0xa00000 0x100000 0x300000;nand read.e 0xf00000 0x600000 0x300000;bootm 0xa00000 0xf00000 bootargs=console=ttyS0,115200 root=/dev/sda1 usb-storage.delay_use=0 rootdelay=1 rw bootcmd=usb reset; ext2load usb 0:1 0xa00000 /boot/uImage; ext2load usb 0:1 0xf00000 /boot/uInitrd; bootm 0xa00000 0xf00000 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=1 disaMvPnp=no enaAutoRecovery=yes pcieTune=no
** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... ................................................................................................................................................................................................................... .... .................................................................................... 5104012 bytes read .... ................................................................................................................................................................................................................... ................................................................................................................................................................................................................... ............................................................................................................................ 9713936 bytes read ## Booting image at 00a00000 ... Image Name: Linux-5.4.2-kirkwood-tld-1 Created: 1970-01-01 0:04:39 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5103948 Bytes = 4.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00f00000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2020-01-07 1:58:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-320L [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] INITRD: 0x00f00000+0x00944000 overlaps in-use memory region - disabling initrd [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=/dev/sda1 usb-storage.delay_use=0 rootdelay=1 rw [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 114296K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 16776K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000010][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000055][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.000936][ T0] Console: colour dummy device 80x30 [ 0.000992][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001023][ T0] pid_max: default: 32768 minimum: 301 [ 0.001461][ T0] LSM: Security Framework initializing [ 0.001656][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001689][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001844][ T0] *** VALIDATE tmpfs *** [ 0.002835][ T0] *** VALIDATE proc *** [ 0.003148][ T0] *** VALIDATE cgroup1 *** [ 0.003176][ T0] *** VALIDATE cgroup2 *** [ 0.003304][ T0] CPU: Testing write buffer coherency: ok [ 0.005314][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.005645][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.005974][ T1] rcu: Hierarchical SRCU implementation. [ 0.008880][ T1] devtmpfs: initialized [ 0.015991][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.016031][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.016338][ T1] xor: measuring software checksum speed [ 0.110133][ T1] arm4regs : 906.800 MB/sec [ 0.210081][ T1] 8regs : 544.400 MB/sec [ 0.310081][ T1] 32regs : 791.600 MB/sec [ 0.310104][ T1] xor: using function: arm4regs (906.800 MB/sec) [ 0.310130][ T1] prandom: seed boundary self test passed [ 0.315140][ T1] prandom: 100 self tests passed [ 0.315154][ T1] pinctrl core: initialized pinctrl subsystem [ 0.316878][ T1] NET: Registered protocol family 16 [ 0.317657][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.318835][ T1] audit: initializing netlink subsys (disabled) [ 0.320511][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 [ 0.320645][ T1] cpuidle: using governor ladder [ 0.320732][ T1] cpuidle: using governor menu [ 0.321343][ T1] Feroceon L2: Enabling L2 [ 0.321393][ T1] Feroceon L2: Cache support initialised. [ 0.328576][ T1] No ATAGs? [ 2.560062][ C0] random: fast init done [ 6.380988][ T1] raid6: int32x8 gen() 88 MB/s [ 6.550550][ T1] raid6: int32x8 xor() 55 MB/s [ 6.720620][ T1] raid6: int32x4 gen() 91 MB/s [ 6.890146][ T1] raid6: int32x4 xor() 58 MB/s [ 7.060206][ T1] raid6: int32x2 gen() 116 MB/s [ 7.230276][ T1] raid6: int32x2 xor() 79 MB/s [ 7.400643][ T1] raid6: int32x1 gen() 94 MB/s [ 7.570484][ T1] raid6: int32x1 xor() 58 MB/s [ 7.570497][ T1] raid6: using algorithm int32x2 gen() 116 MB/s [ 7.570507][ T1] raid6: .... xor() 79 MB/s, rmw enabled [ 7.570518][ T1] raid6: using intx1 recovery algorithm [ 7.570816][ T1] vgaarb: loaded [ 7.571495][ T1] SCSI subsystem initialized [ 7.572074][ T1] usbcore: registered new interface driver usbfs [ 7.572150][ T1] usbcore: registered new interface driver hub [ 7.572246][ T1] usbcore: registered new device driver usb [ 7.572502][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.572516][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.572549][ T1] PTP clock support registered [ 7.574231][ T1] clocksource: Switched to clocksource orion_clocksource [ 8.945560][ T1] *** VALIDATE bpf *** [ 8.945818][ T1] VFS: Disk quotas dquot_6.6.0 [ 8.945924][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.946037][ T1] *** VALIDATE ramfs *** [ 8.957744][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 8.958074][ T1] NET: Registered protocol family 2 [ 8.959072][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 8.959112][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959147][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959172][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 8.959321][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959354][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959614][ T1] NET: Registered protocol family 1 [ 8.960420][ T1] RPC: Registered named UNIX socket transport module. [ 8.960435][ T1] RPC: Registered udp transport module. [ 8.960445][ T1] RPC: Registered tcp transport module. [ 8.960456][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.960473][ T1] PCI: CLS 0 bytes, default 32 [ 8.961043][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.962421][ T1] Initialise system trusted keyrings [ 8.962485][ T1] Key type blacklist registered [ 8.962731][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.962866][ T1] zbud: loaded [ 8.964335][ T1] NFS: Registering the id_resolver key type [ 8.964370][ T1] Key type id_resolver registered [ 8.964382][ T1] Key type id_legacy registered [ 8.964408][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 8.964428][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.964944][ T1] jffs2: version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc. [ 8.965440][ T1] *** VALIDATE jffs2 *** [ 8.965460][ T1] fuse: init (API version 7.31) [ 8.965488][ T1] *** VALIDATE fuse *** [ 8.965504][ T1] *** VALIDATE fuse *** [ 8.965964][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 8.966214][ T1] orangefs_init: module version upstream loaded [ 8.966229][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.010066][ T1] async_tx: api initialized (async) [ 9.010091][ T1] Key type asymmetric registered [ 9.010103][ T1] Asymmetric key parser 'x509' registered [ 9.010171][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 9.011934][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.013597][ T1] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 9.014554][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.075466][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.078567][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.135450][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.138800][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.140318][ T1] printk: console [ttyS0] disabled [ 9.140424][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 9.921089][ T1] printk: console [ttyS0] enabled [ 9.926790][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 10416666) is a 16550A [ 9.946152][ T1] loop: module loaded [ 9.950664][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 9.960225][ T1] scsi host0: sata_mv [ 9.964802][ T1] scsi host1: sata_mv [ 9.968932][ T1] ata1: SATA max UDMA/133 irq 33 [ 9.973703][ T1] ata2: SATA max UDMA/133 irq 33 [ 9.979864][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 9.986980][ T1] nand: Hynix H27U1G8F2BTR-BC [ 9.991494][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 9.999772][ T1] Scanning device for bad blocks [ 10.091836][ T1] Bad eraseblock 783 at 0x0000061e0000 [ 10.123919][ T1] 7 fixed-partitions partitions found on MTD device orion_nand [ 10.131311][ T1] Creating 7 MTD partitions on "orion_nand": [ 10.137145][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 10.144486][ T1] 0x000000100000-0x000000600000 : "uImage" [ 10.151747][ T1] 0x000000600000-0x000000b00000 : "ramdisk" [ 10.159117][ T1] 0x000000b00000-0x000006f00000 : "image" [ 10.166792][ T1] 0x000006f00000-0x000007900000 : "mini firmware" [ 10.174677][ T1] 0x000007900000-0x000007e00000 : "config" [ 10.181915][ T1] 0x000007e00000-0x000008000000 : "my-dlink" [ 10.190819][ T1] libphy: Fixed MDIO Bus: probed [ 10.196646][ T1] libphy: orion_mdio_bus: probed [ 10.202884][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.212250][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 10.221921][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.229246][ T1] ehci-pci: EHCI PCI platform driver [ 10.234506][ T1] ehci-orion: EHCI orion driver [ 10.239417][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.245696][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 10.254336][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 10.284262][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.291301][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 10.300282][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.308215][ T118] ata1: SATA link down (SStatus 0 SControl F300) [ 10.314403][ T1] usb usb1: Product: EHCI Host Controller [ 10.319952][ T1] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 10.327315][ T1] usb usb1: SerialNumber: f1050000.ehci [ 10.333478][ T1] hub 1-0:1.0: USB hub found [ 10.338144][ T1] hub 1-0:1.0: 1 port detected [ 10.343597][ T1] usbcore: registered new interface driver usb-storage [ 10.350777][ T1] mousedev: PS/2 mouse device common for all mice [ 10.665929][ T120] ata2: SATA link down (SStatus 0 SControl F300) [ 10.704273][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 10.905221][ T15] usb 1-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 1.26 [ 10.914073][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.921918][ T15] usb 1-1: Product: Cruzer Micro [ 10.926718][ T15] usb 1-1: Manufacturer: SanDisk [ 10.931492][ T15] usb 1-1: SerialNumber: 20043515700598026046 [ 10.938303][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.945614][ T15] scsi host2: usb-storage 1-1:1.0 [ 10.952080][ T22] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 [ 10.962766][ T7] sd 2:0:0:0: [sda] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 10.972624][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 10.978873][ T7] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.994437][ T7] sda: sda1 [ 11.001128][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 11.444267][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 11.450534][ T1] i2c /dev entries driver [ 11.455517][ T1] device-mapper: uevent: version 1.0.3 [ 11.461141][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 11.470774][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 11.478051][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 11.485380][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 11.492726][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 11.499514][ T1] device-mapper: raid: Loading target version 1.14.0 [ 11.507779][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 11.514150][ T1] exFAT: Version 1.3.0 [ 11.518211][ T1] drop_monitor: Initializing network drop monitor service [ 11.525503][ T1] NET: Registered protocol family 17 [ 11.530903][ T1] Key type dns_resolver registered [ 11.536426][ T1] registered taskstats version 1 [ 11.541203][ T1] Loading compiled-in X.509 certificates [ 11.546817][ T1] zswap: loaded using pool lzo/zbud [ 11.552121][ T1] Key type ._fscrypt registered [ 11.556842][ T1] Key type .fscrypt registered [ 11.581410][ T1] Key type big_key registered [ 11.590019][ T1] Key type encrypted registered [ 11.597783][ T1] hctosys: unable to open rtc device (rtc0) [ 11.603987][ T1] Waiting 1 sec before mounting root device... [ 12.644457][ T1] md: Waiting for all devices to be available before autodetect [ 12.651910][ T1] md: If you don't use raid, use raid=noautodetect [ 12.659174][ T1] md: Autodetecting RAID arrays. [ 12.663945][ T1] md: autorun ... [ 12.667491][ T1] md: ... autorun DONE. [ 12.690034][ T1] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 12.697926][ T1] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 12.715565][ T1] devtmpfs: mounted [ 12.722380][ T1] Freeing unused kernel memory: 1024K [ 12.728478][ T1] Checked W+X mappings: passed, no W+X pages found [ 12.734862][ T1] Run /sbin/init as init process INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. ERROR: could not open /proc/stat: No such file or directory findfs: unable to resolve 'LABEL=rootfs' [....] Files under mount point '/run' will be hidden. ... (warning). [....] Starting hotplug events dispatcher: systemd-udevd. ok [....] Synthesizing the initial hotplug events (subsystems)...done. [....] Synthesizing the initial hotplug events (devices)...[ 15.605622][ T325] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 15.682834][ T321] systemd-udevd[321]: Using default interface naming scheme 'v240'. done. [....] Waiting for /dev to be fully populated...[ 15.869596][ T321] systemd-udevd[321]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 16.250110][ T320] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 16.365408][ T320] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 16.463462][ T321] usbcore: registered new interface driver uas [ 16.502251][ T320] orion_wdt f1020300.watchdog-timer: IRQ index 1 not found [ 16.576289][ T320] orion_wdt: Initial timeout 25 sec [ 16.649161][ T342] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 16.858957][ T324] systemd-udevd[324]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 17.102667][ T341] marvell-cesa f1030000.crypto: CESA device successfully registered done. [....] Setting hostname to 'debian'...done. [....] Activating swap:. ok [ 19.511252][ C0] random: crng init done [ 19.629257][ T554] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.33.1 [/sbin/fsck.ext2 (1) -- /] fsck.ext2 -y -C0 /dev/sda1 e2fsck 1.44.5 (15-Dec-2018) rootfs: clean, 18066/122160 files, 198252/488192 blocks . ok [ 20.134663][ T580] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. ok [....] Cleaning up temporary files...[....] Cleaning /tmp...done. /tmp. ok [....] Will now mount local filesystems:. ok [....] Will now activate swapfile swap:done. [....] Checking minimum space in /tmp...done. [....] Cleaning up temporary files.... ok [....] Starting Setting kernel variables: sysctl. ok [....] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 24.275171][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 24.285896][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 24.292683][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 24.303212][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled Listening on LPF/eth0/00:50:43:00:02:02 Sending on LPF/eth0/00:50:43:00:02:02 Sending on Socket/fallback DHCPREQUEST for 10.0.1.185 on eth0 to 255.255.255.255 port 67 DHCPACK of 10.0.1.185 from 10.0.1.1 bound to 10.0.1.185 -- renewal in 35627 seconds. [ 25.551017][ T1134] NET: Registered protocol family 10 [ 25.557926][ T1134] Segment Routing with IPv6 done. [....] Starting RPC port mapper daemon: rpcbind. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1345 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1372 (klogd) . ok [....] Starting system message bus: dbus. ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting NTP server: ntpd. ok [....] Starting OpenBSD Secure Shell server: sshd. ok [....] Running local boot scripts (/etc/rc.local). ok Debian GNU/Linux 10 debian ttyS0 debian login:
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 07, 2020 11:42PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 01:43AM |
Registered: 10 years ago Posts: 13 |
** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs usb-storage.delay_use=0 rootdelay=1 rw' Marvell>> printenv baudrate=115200 loads_echo=0 ipaddr=2.66.66.201 serverip=2.66.66.32 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root) MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; ethaddr=00:50:43:00:02:02 ethmtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes ethact=egiga0 bootargs_orig=root=/dev/ram=console=ttyS0,115200 :::DB88FXX81:egiga0:none bootcmd_orig=nand=read.e 0xa00000 0x100000 0x300000;nand read.e 0xf00000 0x600000 0x300000;bootm 0xa00000 0xf00000 bootcmd=usb reset; ext2load usb 0:1 0xa00000 /boot/uImage; ext2load usb 0:1 0xf00000 /boot/uInitrd; bootm 0xa00000 0xf00000 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=1 disaMvPnp=no enaAutoRecovery=yes pcieTune=no bootargs=console=ttyS0,115200 root=LABEL=rootfs usb-storage.delay_use=0 rootdelay=1 rw Environment size: 1493/131068 bytes Marvell>> boot (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... ................................................................................................................................................................................................................... .... .................................................................................... 5104012 bytes read .... ................................................................................................................................................................................................................... ................................................................................................................................................................................................................... ............................................................................................................................ 9713936 bytes read ## Booting image at 00a00000 ... Image Name: Linux-5.4.2-kirkwood-tld-1 Created: 1970-01-01 0:04:39 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5103948 Bytes = 4.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00f00000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2020-01-07 1:58:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-320L [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] INITRD: 0x00f00000+0x00944000 overlaps in-use memory region - disabling initrd [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs usb-storage.delay_use=0 rootdelay=1 rw [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 114296K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 16776K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000010][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000055][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.000933][ T0] Console: colour dummy device 80x30 [ 0.000988][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.001020][ T0] pid_max: default: 32768 minimum: 301 [ 0.001452][ T0] LSM: Security Framework initializing [ 0.001645][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001679][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.001836][ T0] *** VALIDATE tmpfs *** [ 0.002819][ T0] *** VALIDATE proc *** [ 0.003136][ T0] *** VALIDATE cgroup1 *** [ 0.003164][ T0] *** VALIDATE cgroup2 *** [ 0.003292][ T0] CPU: Testing write buffer coherency: ok [ 0.005301][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.005633][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.005963][ T1] rcu: Hierarchical SRCU implementation. [ 0.008875][ T1] devtmpfs: initialized [ 0.015915][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.015957][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.016260][ T1] xor: measuring software checksum speed [ 0.110131][ T1] arm4regs : 907.200 MB/sec [ 0.210083][ T1] 8regs : 544.400 MB/sec [ 0.310084][ T1] 32regs : 791.600 MB/sec [ 0.310106][ T1] xor: using function: arm4regs (907.200 MB/sec) [ 0.310131][ T1] prandom: seed boundary self test passed [ 0.315140][ T1] prandom: 100 self tests passed [ 0.315154][ T1] pinctrl core: initialized pinctrl subsystem [ 0.316872][ T1] NET: Registered protocol family 16 [ 0.317649][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.318822][ T1] audit: initializing netlink subsys (disabled) [ 0.320492][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1 [ 0.320628][ T1] cpuidle: using governor ladder [ 0.320715][ T1] cpuidle: using governor menu [ 0.321325][ T1] Feroceon L2: Enabling L2 [ 0.321376][ T1] Feroceon L2: Cache support initialised. [ 0.328555][ T1] No ATAGs? [ 2.560064][ C0] random: fast init done [ 6.380901][ T1] raid6: int32x8 gen() 88 MB/s [ 6.550515][ T1] raid6: int32x8 xor() 55 MB/s [ 6.720586][ T1] raid6: int32x4 gen() 91 MB/s [ 6.890174][ T1] raid6: int32x4 xor() 58 MB/s [ 7.060549][ T1] raid6: int32x2 gen() 116 MB/s [ 7.230283][ T1] raid6: int32x2 xor() 79 MB/s [ 7.400645][ T1] raid6: int32x1 gen() 94 MB/s [ 7.570479][ T1] raid6: int32x1 xor() 58 MB/s [ 7.570492][ T1] raid6: using algorithm int32x2 gen() 116 MB/s [ 7.570503][ T1] raid6: .... xor() 79 MB/s, rmw enabled [ 7.570513][ T1] raid6: using intx1 recovery algorithm [ 7.570807][ T1] vgaarb: loaded [ 7.571486][ T1] SCSI subsystem initialized [ 7.572070][ T1] usbcore: registered new interface driver usbfs [ 7.572146][ T1] usbcore: registered new interface driver hub [ 7.572245][ T1] usbcore: registered new device driver usb [ 7.572502][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.572516][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.572548][ T1] PTP clock support registered [ 7.574227][ T1] clocksource: Switched to clocksource orion_clocksource [ 8.945668][ T1] *** VALIDATE bpf *** [ 8.945925][ T1] VFS: Disk quotas dquot_6.6.0 [ 8.946024][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.946138][ T1] *** VALIDATE ramfs *** [ 8.957837][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 8.958170][ T1] NET: Registered protocol family 2 [ 8.959163][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 8.959202][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959232][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 8.959257][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 8.959406][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959440][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 8.959707][ T1] NET: Registered protocol family 1 [ 8.960508][ T1] RPC: Registered named UNIX socket transport module. [ 8.960524][ T1] RPC: Registered udp transport module. [ 8.960535][ T1] RPC: Registered tcp transport module. [ 8.960545][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.960562][ T1] PCI: CLS 0 bytes, default 32 [ 8.961132][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 8.962498][ T1] Initialise system trusted keyrings [ 8.962559][ T1] Key type blacklist registered [ 8.962809][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 8.962944][ T1] zbud: loaded [ 8.964414][ T1] NFS: Registering the id_resolver key type [ 8.964449][ T1] Key type id_resolver registered [ 8.964462][ T1] Key type id_legacy registered [ 8.964487][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 8.964508][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 8.965025][ T1] jffs2: version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc. [ 8.965527][ T1] *** VALIDATE jffs2 *** [ 8.965547][ T1] fuse: init (API version 7.31) [ 8.965571][ T1] *** VALIDATE fuse *** [ 8.965586][ T1] *** VALIDATE fuse *** [ 8.966040][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 8.966292][ T1] orangefs_init: module version upstream loaded [ 8.966307][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.010374][ T1] async_tx: api initialized (async) [ 9.010400][ T1] Key type asymmetric registered [ 9.010412][ T1] Asymmetric key parser 'x509' registered [ 9.010479][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 9.012224][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 9.013894][ T1] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 9.014855][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.075463][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.078485][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.135441][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.138790][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.140304][ T1] printk: console [ttyS0] disabled [ 9.140410][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 9.921356][ T1] printk: console [ttyS0] enabled [ 9.927057][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 10416666) is a 16550A [ 9.946451][ T1] loop: module loaded [ 9.950961][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 9.960526][ T1] scsi host0: sata_mv [ 9.965096][ T1] scsi host1: sata_mv [ 9.969226][ T1] ata1: SATA max UDMA/133 irq 33 [ 9.974006][ T1] ata2: SATA max UDMA/133 irq 33 [ 9.980165][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 9.987284][ T1] nand: Hynix H27U1G8F2BTR-BC [ 9.991796][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.000074][ T1] Scanning device for bad blocks [ 10.092158][ T1] Bad eraseblock 783 at 0x0000061e0000 [ 10.124269][ T1] 7 fixed-partitions partitions found on MTD device orion_nand [ 10.131632][ T1] Creating 7 MTD partitions on "orion_nand": [ 10.137467][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 10.144822][ T1] 0x000000100000-0x000000600000 : "uImage" [ 10.152066][ T1] 0x000000600000-0x000000b00000 : "ramdisk" [ 10.159426][ T1] 0x000000b00000-0x000006f00000 : "image" [ 10.167091][ T1] 0x000006f00000-0x000007900000 : "mini firmware" [ 10.174991][ T1] 0x000007900000-0x000007e00000 : "config" [ 10.182221][ T1] 0x000007e00000-0x000008000000 : "my-dlink" [ 10.191118][ T1] libphy: Fixed MDIO Bus: probed [ 10.196960][ T1] libphy: orion_mdio_bus: probed [ 10.203208][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.212566][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 10.222235][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.229556][ T1] ehci-pci: EHCI PCI platform driver [ 10.234816][ T1] ehci-orion: EHCI orion driver [ 10.239727][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.246006][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 10.254643][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 10.284260][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.291298][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 10.300276][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.308206][ T118] ata1: SATA link down (SStatus 0 SControl F300) [ 10.314396][ T1] usb usb1: Product: EHCI Host Controller [ 10.319953][ T1] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 10.327323][ T1] usb usb1: SerialNumber: f1050000.ehci [ 10.333484][ T1] hub 1-0:1.0: USB hub found [ 10.338152][ T1] hub 1-0:1.0: 1 port detected [ 10.343605][ T1] usbcore: registered new interface driver usb-storage [ 10.350786][ T1] mousedev: PS/2 mouse device common for all mice [ 10.665928][ T120] ata2: SATA link down (SStatus 0 SControl F300) [ 10.704269][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 10.905279][ T15] usb 1-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 1.26 [ 10.914133][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 10.921979][ T15] usb 1-1: Product: Cruzer Micro [ 10.926780][ T15] usb 1-1: Manufacturer: SanDisk [ 10.931552][ T15] usb 1-1: SerialNumber: 20043515700598026046 [ 10.938362][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 10.945664][ T15] scsi host2: usb-storage 1-1:1.0 [ 10.952138][ T22] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 [ 10.962825][ T7] sd 2:0:0:0: [sda] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 10.972683][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 10.978932][ T7] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.994484][ T7] sda: sda1 [ 11.001065][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 11.444263][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 11.450536][ T1] i2c /dev entries driver [ 11.455518][ T1] device-mapper: uevent: version 1.0.3 [ 11.461137][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 11.470762][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 11.478042][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 11.485373][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 11.492717][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 11.499506][ T1] device-mapper: raid: Loading target version 1.14.0 [ 11.507789][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 11.514162][ T1] exFAT: Version 1.3.0 [ 11.518230][ T1] drop_monitor: Initializing network drop monitor service [ 11.525516][ T1] NET: Registered protocol family 17 [ 11.530917][ T1] Key type dns_resolver registered [ 11.536439][ T1] registered taskstats version 1 [ 11.541212][ T1] Loading compiled-in X.509 certificates [ 11.546826][ T1] zswap: loaded using pool lzo/zbud [ 11.552127][ T1] Key type ._fscrypt registered [ 11.556851][ T1] Key type .fscrypt registered [ 11.581453][ T1] Key type big_key registered [ 11.590035][ T1] Key type encrypted registered [ 11.597778][ T1] hctosys: unable to open rtc device (rtc0) [ 11.603983][ T1] Waiting 1 sec before mounting root device... [ 12.644449][ T1] md: Waiting for all devices to be available before autodetect [ 12.651902][ T1] md: If you don't use raid, use raid=noautodetect [ 12.659169][ T1] md: Autodetecting RAID arrays. [ 12.663945][ T1] md: autorun ... [ 12.667494][ T1] md: ... autorun DONE. [ 12.671728][ T1] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6 [ 12.680457][ T1] Please append a correct "root=" boot option; here are the available partitions: [ 12.689562][ T1] 1f00 1024 mtdblock0 [ 12.689566][ T1] (driver?) [ 12.697521][ T1] 1f01 5120 mtdblock1 [ 12.697525][ T1] (driver?) [ 12.705472][ T1] 1f02 5120 mtdblock2 [ 12.705476][ T1] (driver?) [ 12.713372][ T1] 1f03 102400 mtdblock3 [ 12.713375][ T1] (driver?) [ 12.721297][ T1] 1f04 10240 mtdblock4 [ 12.721300][ T1] (driver?) [ 12.729219][ T1] 1f05 5120 mtdblock5 [ 12.729222][ T1] (driver?) [ 12.737137][ T1] 1f06 2048 mtdblock6 [ 12.737140][ T1] (driver?) [ 12.745059][ T1] 0800 1954176 sda [ 12.745063][ T1] driver: sd [ 12.752527][ T1] 0801 1952768 sda1 00046dc1-01 [ 12.752530][ T1] [ 12.760280][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 12.769205][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.2-kirkwood-tld-1 #1.0 [ 12.776999][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 12.783960][ T1] [<8010f5a8>] (unwind_backtrace) from [<8010b930>] (show_stack+0x10/0x14) [ 12.792373][ T1] [<8010b930>] (show_stack) from [<80119bb8>] (panic+0xfc/0x328) [ 12.799917][ T1] [<80119bb8>] (panic) from [<80e01550>] (mount_block_root+0x1f8/0x290) [ 12.808061][ T1] [<80e01550>] (mount_block_root) from [<80e016d8>] (mount_root+0xf0/0x130) [ 12.816554][ T1] [<80e016d8>] (mount_root) from [<80e01860>] (prepare_namespace+0x148/0x188) [ 12.825221][ T1] [<80e01860>] (prepare_namespace) from [<80e010d0>] (kernel_init_freeable+0x174/0x1d8) [ 12.834756][ T1] [<80e010d0>] (kernel_init_freeable) from [<809c036c>] (kernel_init+0x8/0x10c) [ 12.843602][ T1] [<809c036c>] (kernel_init) from [<801010e0>] (ret_from_fork+0x14/0x34) [ 12.851824][ T1] Exception stack(0x87883fb0 to 0x87883ff8) [ 12.857547][ T1] 3fa0: 00000000 00000000 00000000 00000000 [ 12.866378][ T1] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 12.875215][ T1] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 12.882499][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 01:50AM |
Admin Registered: 13 years ago Posts: 18,821 |
[ 0.000000][ T0] INITRD: 0x00f00000+0x00944000 overlaps in-use memory region - disabling initrd
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 02:02AM |
Admin Registered: 13 years ago Posts: 18,821 |
setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' setenv bootcmd 'usb reset; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x2100000 /boot/uInitrd; bootm 0x800000 0x2100000'
boot
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 02:03PM |
Registered: 10 years ago Posts: 13 |
** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' Marvell>> setenv bootcmd 'usb reset; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x2100000 /boot/uInitrd; bootm 0x800000 0x2100000' Marvell>> Marvell>> printenv baudrate=115200 loads_echo=0 ipaddr=2.66.66.201 serverip=2.66.66.32 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root) MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; ethaddr=00:50:43:00:02:02 ethmtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no image_multi=yes ethact=egiga0 bootargs_orig=root=/dev/ram=console=ttyS0,115200 :::DB88FXX81:egiga0:none bootcmd_orig=nand=read.e 0xa00000 0x100000 0x300000;nand read.e 0xf00000 0x600000 0x300000;bootm 0xa00000 0xf00000 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=1 disaMvPnp=no enaAutoRecovery=yes pcieTune=no bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial bootcmd=usb reset; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x2100000 /boot/uInitrd; bootm 0x800000 0x2100000 Environment size: 1488/131068 bytes Marvell>> boot (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... .................................................................................................................................................................................................................................................................................................................................................................................................................... .... .................................................................................... 5104012 bytes read .... ......................................................................................................................................................................................................................................................................................................................................................................................................................... ......................................................................................................................................................................................................................................................................................................................................................................................................................... ............................................................................................................................ 9713936 bytes read ## Booting image at 00800000 ... Image Name: Linux-5.4.2-kirkwood-tld-1 Created: 1970-01-01 0:04:39 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5103948 Bytes = 4.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2020-01-07 1:58:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-320L [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 104808K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 26264K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000011][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.008533][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.015984][ T0] Console: colour dummy device 80x30 [ 0.021195][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.032419][ T0] pid_max: default: 32768 minimum: 301 [ 0.038137][ T0] LSM: Security Framework initializing [ 0.043663][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051697][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060288][ T0] *** VALIDATE tmpfs *** [ 0.065348][ T0] *** VALIDATE proc *** [ 0.069687][ T0] *** VALIDATE cgroup1 *** [ 0.073950][ T0] *** VALIDATE cgroup2 *** [ 0.078310][ T0] CPU: Testing write buffer coherency: ok [ 0.085911][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.093170][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.099320][ T1] rcu: Hierarchical SRCU implementation. [ 0.107671][ T1] devtmpfs: initialized [ 0.118724][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.129305][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.137102][ T1] xor: measuring software checksum speed [ 0.238560][ T1] arm4regs : 906.800 MB/sec [ 0.338559][ T1] 8regs : 544.400 MB/sec [ 0.438561][ T1] 32regs : 791.600 MB/sec [ 0.443428][ T1] xor: using function: arm4regs (906.800 MB/sec) [ 0.449634][ T1] prandom: seed boundary self test passed [ 0.460219][ T1] prandom: 100 self tests passed [ 0.464993][ T1] pinctrl core: initialized pinctrl subsystem [ 0.472640][ T1] NET: Registered protocol family 16 [ 0.478493][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.487250][ T1] audit: initializing netlink subsys (disabled) [ 0.494958][ T14] audit: type=2000 audit(0.480:1): state=initialized audit_enabled=0 res=1 [ 0.503529][ T1] cpuidle: using governor ladder [ 0.508392][ T1] cpuidle: using governor menu [ 0.513641][ T1] Feroceon L2: Enabling L2 [ 0.517929][ T1] Feroceon L2: Cache support initialised. [ 0.530734][ T1] No ATAGs? [ 2.568541][ C0] random: fast init done [ 6.589320][ T1] raid6: int32x8 gen() 88 MB/s [ 6.759036][ T1] raid6: int32x8 xor() 55 MB/s [ 6.929062][ T1] raid6: int32x4 gen() 91 MB/s [ 7.098658][ T1] raid6: int32x4 xor() 58 MB/s [ 7.268904][ T1] raid6: int32x2 gen() 116 MB/s [ 7.438752][ T1] raid6: int32x2 xor() 79 MB/s [ 7.609122][ T1] raid6: int32x1 gen() 94 MB/s [ 7.778961][ T1] raid6: int32x1 xor() 58 MB/s [ 7.783907][ T1] raid6: using algorithm int32x2 gen() 116 MB/s [ 7.789990][ T1] raid6: .... xor() 79 MB/s, rmw enabled [ 7.795449][ T1] raid6: using intx1 recovery algorithm [ 7.801126][ T1] vgaarb: loaded [ 7.805171][ T1] SCSI subsystem initialized [ 7.810201][ T1] usbcore: registered new interface driver usbfs [ 7.816421][ T1] usbcore: registered new interface driver hub [ 7.822537][ T1] usbcore: registered new device driver usb [ 7.828498][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.834156][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.843980][ T1] PTP clock support registered [ 7.850229][ T1] clocksource: Switched to clocksource orion_clocksource [ 9.228412][ T1] *** VALIDATE bpf *** [ 9.232611][ T1] VFS: Disk quotas dquot_6.6.0 [ 9.237296][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.245053][ T1] *** VALIDATE ramfs *** [ 9.260832][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 9.261165][ T1] NET: Registered protocol family 2 [ 9.273893][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 9.283001][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 9.291391][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 9.299110][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 9.306322][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 9.313564][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 9.321468][ T1] NET: Registered protocol family 1 [ 9.327287][ T1] RPC: Registered named UNIX socket transport module. [ 9.333962][ T1] RPC: Registered udp transport module. [ 9.339340][ T1] RPC: Registered tcp transport module. [ 9.344740][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.351870][ T1] PCI: CLS 0 bytes, default 32 [ 9.356829][ T1] Trying to unpack rootfs image as initramfs... [ 10.371785][ T1] Freeing initrd memory: 9488K [ 10.376571][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 10.385311][ T1] Initialise system trusted keyrings [ 10.390570][ T1] Key type blacklist registered [ 10.395526][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 10.402814][ T1] zbud: loaded [ 10.407424][ T1] NFS: Registering the id_resolver key type [ 10.413265][ T1] Key type id_resolver registered [ 10.418122][ T1] Key type id_legacy registered [ 10.422879][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 10.430278][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.437798][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 10.446038][ T1] *** VALIDATE jffs2 *** [ 10.450122][ T1] fuse: init (API version 7.31) [ 10.454853][ T1] *** VALIDATE fuse *** [ 10.458847][ T1] *** VALIDATE fuse *** [ 10.463276][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 10.470653][ T1] orangefs_init: module version upstream loaded [ 10.476720][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 10.544902][ T1] async_tx: api initialized (async) [ 10.549947][ T1] Key type asymmetric registered [ 10.554839][ T1] Asymmetric key parser 'x509' registered [ 10.560517][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 10.570521][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 10.580122][ T1] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 10.587240][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 10.651451][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 10.662444][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 10.731444][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 10.742753][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 10.751323][ T1] printk: console [ttyS0] disabled [ 10.756357][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 10.766099][ T1] printk: console [ttyS0] enabled [ 10.766099][ T1] printk: console [ttyS0] enabled [ 10.775861][ T1] printk: bootconsole [earlycon0] disabled [ 10.775861][ T1] printk: bootconsole [earlycon0] disabled [ 10.788001][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 10416666) is a 16550A [ 10.807278][ T1] loop: module loaded [ 10.811892][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 10.821398][ T1] scsi host0: sata_mv [ 10.825903][ T1] scsi host1: sata_mv [ 10.830028][ T1] ata1: SATA max UDMA/133 irq 33 [ 10.834871][ T1] ata2: SATA max UDMA/133 irq 33 [ 10.841043][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 10.848067][ T1] nand: Hynix H27U1G8F2BTR-BC [ 10.852672][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.860955][ T1] Scanning device for bad blocks [ 10.952910][ T1] Bad eraseblock 783 at 0x0000061e0000 [ 10.984974][ T1] 7 fixed-partitions partitions found on MTD device orion_nand [ 10.992362][ T1] Creating 7 MTD partitions on "orion_nand": [ 10.998177][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 11.005511][ T1] 0x000000100000-0x000000600000 : "uImage" [ 11.012805][ T1] 0x000000600000-0x000000b00000 : "ramdisk" [ 11.020114][ T1] 0x000000b00000-0x000006f00000 : "image" [ 11.027773][ T1] 0x000006f00000-0x000007900000 : "mini firmware" [ 11.035654][ T1] 0x000007900000-0x000007e00000 : "config" [ 11.042943][ T1] 0x000007e00000-0x000008000000 : "my-dlink" [ 11.051859][ T1] libphy: Fixed MDIO Bus: probed [ 11.057597][ T1] libphy: orion_mdio_bus: probed [ 11.078632][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 11.088267][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 11.097903][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.105265][ T1] ehci-pci: EHCI PCI platform driver [ 11.110530][ T1] ehci-orion: EHCI orion driver [ 11.115447][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 11.121724][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 11.130331][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 11.160261][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 11.167302][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 11.176285][ T118] ata1: SATA link down (SStatus 0 SControl F300) [ 11.182474][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.190449][ T1] usb usb1: Product: EHCI Host Controller [ 11.196005][ T1] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 11.203441][ T1] usb usb1: SerialNumber: f1050000.ehci [ 11.209626][ T1] hub 1-0:1.0: USB hub found [ 11.214172][ T1] hub 1-0:1.0: 1 port detected [ 11.219600][ T1] usbcore: registered new interface driver usb-storage [ 11.226776][ T1] mousedev: PS/2 mouse device common for all mice [ 11.531922][ T120] ata2: SATA link down (SStatus 0 SControl F300) [ 11.580272][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 11.781217][ T15] usb 1-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 1.26 [ 11.790072][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.797917][ T15] usb 1-1: Product: Cruzer Micro [ 11.802710][ T15] usb 1-1: Manufacturer: SanDisk [ 11.807483][ T15] usb 1-1: SerialNumber: 20043515700598026046 [ 11.814299][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 11.821604][ T15] scsi host2: usb-storage 1-1:1.0 [ 12.250281][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 12.256565][ T1] i2c /dev entries driver [ 12.261650][ T1] device-mapper: uevent: version 1.0.3 [ 12.267268][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 12.276901][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 12.284180][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 12.291510][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 12.298864][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 12.305660][ T1] device-mapper: raid: Loading target version 1.14.0 [ 12.313913][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 12.320366][ T1] exFAT: Version 1.3.0 [ 12.324370][ T1] drop_monitor: Initializing network drop monitor service [ 12.331651][ T1] NET: Registered protocol family 17 [ 12.337057][ T1] Key type dns_resolver registered [ 12.342553][ T1] registered taskstats version 1 [ 12.347324][ T1] Loading compiled-in X.509 certificates [ 12.352925][ T1] zswap: loaded using pool lzo/zbud [ 12.358219][ T1] Key type ._fscrypt registered [ 12.362937][ T1] Key type .fscrypt registered [ 12.475664][ T1] Key type big_key registered [ 12.528102][ T1] Key type encrypted registered [ 12.535964][ T1] hctosys: unable to open rtc device (rtc0) [ 12.545269][ T1] Freeing unused kernel memory: 1024K [ 12.571107][ T1] Checked W+X mappings: passed, no W+X pages found [ 12.577441][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 12.891469][ T22] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 [ 12.916150][ T7] sd 2:0:0:0: [sda] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 12.935036][ T7] sd 2:0:0:0: [sda] Write Protect is off [ 12.948787][ T7] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 12.986272][ T7] sda: sda1 [ 13.003905][ T7] sd 2:0:0:0: [sda] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 fsck: error 2 (No such file or directory) while executing fsck.ext2 for /dev/sda1 fsck exited with status code 8 done. Warning: File system check failed but did not detect errors mount: mounting /dev/sda1 on /root failed: No such device Failed to mount /dev/sda1 as root file system. BusyBox v1.30.1 (Debian 1:1.30.1-4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 08:18PM |
Registered: 10 years ago Posts: 13 |
fsck: error 2 (No such file or directory) while executing fsck.ext2 for /dev/sda1
(initramfs) fsck.ext2 /dev/sda1 sh: fsck.ext2: not found
(initramfs) fsck /dev/sda1 fsck from util-linux 2.33.1 fsck: error 2 (No such file or directory) while executing fsck.ext2 for /dev/sda1
(initramfs) fs[TAB-autocomplete] fsck fsck.ext3 fsfreeze fstrim fstype
Quote
bodhi
1. Format a new USB drive with a single Ext3 partition
# tune2fs -j /dev/sdb1 tune2fs 1.45.3 (14-Jul-2019) Creating journal inode: done #
** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> setenv bootargs 'console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' Marvell>> saveenv Saving Environment to NAND... Erasing Nand...Writing to Nand... done Marvell>> reset ** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 1 ** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found .... ..................................................................................................................................................................................... .... .................................................................................... 5104012 bytes read .... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ............................................................................................................................ 9713936 bytes read ## Booting image at 00800000 ... Image Name: Linux-5.4.2-kirkwood-tld-1 Created: 1970-01-01 0:04:39 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5103948 Bytes = 4.9 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02100000 ... Image Name: initramfs-5.2.9-kirkwood-tld-1 Created: 2020-01-07 1:58:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 9713872 Bytes = 9.3 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.2-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: D-Link DNS-320L [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 104808K/131072K available (9216K kernel code, 897K rwdata, 3636K rodata, 1024K init, 296K bss, 26264K reserved, 0K cma-reserved) [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x46c/0x808 with crng_init=0 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000011][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.008533][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.015985][ T0] Console: colour dummy device 80x30 [ 0.021194][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.032418][ T0] pid_max: default: 32768 minimum: 301 [ 0.038130][ T0] LSM: Security Framework initializing [ 0.043657][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051696][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060283][ T0] *** VALIDATE tmpfs *** [ 0.065341][ T0] *** VALIDATE proc *** [ 0.069691][ T0] *** VALIDATE cgroup1 *** [ 0.073959][ T0] *** VALIDATE cgroup2 *** [ 0.078319][ T0] CPU: Testing write buffer coherency: ok [ 0.085933][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.093194][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 [ 0.099347][ T1] rcu: Hierarchical SRCU implementation. [ 0.107697][ T1] devtmpfs: initialized [ 0.118754][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.129339][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.137134][ T1] xor: measuring software checksum speed [ 0.238567][ T1] arm4regs : 907.200 MB/sec [ 0.338565][ T1] 8regs : 544.800 MB/sec [ 0.438564][ T1] 32regs : 791.600 MB/sec [ 0.443428][ T1] xor: using function: arm4regs (907.200 MB/sec) [ 0.449633][ T1] prandom: seed boundary self test passed [ 0.460219][ T1] prandom: 100 self tests passed [ 0.464993][ T1] pinctrl core: initialized pinctrl subsystem [ 0.472634][ T1] NET: Registered protocol family 16 [ 0.478493][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.487250][ T1] audit: initializing netlink subsys (disabled) [ 0.494966][ T14] audit: type=2000 audit(0.480:1): state=initialized audit_enabled=0 res=1 [ 0.503535][ T1] cpuidle: using governor ladder [ 0.508389][ T1] cpuidle: using governor menu [ 0.513639][ T1] Feroceon L2: Enabling L2 [ 0.517929][ T1] Feroceon L2: Cache support initialised. [ 0.530737][ T1] No ATAGs? [ 2.568541][ C0] random: fast init done [ 6.589320][ T1] raid6: int32x8 gen() 88 MB/s [ 6.759028][ T1] raid6: int32x8 xor() 55 MB/s [ 6.929071][ T1] raid6: int32x4 gen() 91 MB/s [ 7.098660][ T1] raid6: int32x4 xor() 58 MB/s [ 7.268704][ T1] raid6: int32x2 gen() 116 MB/s [ 7.438746][ T1] raid6: int32x2 xor() 79 MB/s [ 7.609122][ T1] raid6: int32x1 gen() 94 MB/s [ 7.778960][ T1] raid6: int32x1 xor() 58 MB/s [ 7.783899][ T1] raid6: using algorithm int32x2 gen() 116 MB/s [ 7.789982][ T1] raid6: .... xor() 79 MB/s, rmw enabled [ 7.795441][ T1] raid6: using intx1 recovery algorithm [ 7.801118][ T1] vgaarb: loaded [ 7.805163][ T1] SCSI subsystem initialized [ 7.810188][ T1] usbcore: registered new interface driver usbfs [ 7.816405][ T1] usbcore: registered new interface driver hub [ 7.822520][ T1] usbcore: registered new device driver usb [ 7.828480][ T1] pps_core: LinuxPPS API ver. 1 registered [ 7.834140][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 7.843962][ T1] PTP clock support registered [ 7.850213][ T1] clocksource: Switched to clocksource orion_clocksource [ 9.228325][ T1] *** VALIDATE bpf *** [ 9.232527][ T1] VFS: Disk quotas dquot_6.6.0 [ 9.237220][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 9.244982][ T1] *** VALIDATE ramfs *** [ 9.260752][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 9.261080][ T1] NET: Registered protocol family 2 [ 9.273799][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 9.282913][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 9.291305][ T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 9.299023][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 9.306234][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 9.313470][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 9.321371][ T1] NET: Registered protocol family 1 [ 9.327192][ T1] RPC: Registered named UNIX socket transport module. [ 9.333868][ T1] RPC: Registered udp transport module. [ 9.339245][ T1] RPC: Registered tcp transport module. [ 9.344646][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.351775][ T1] PCI: CLS 0 bytes, default 32 [ 9.356737][ T1] Trying to unpack rootfs image as initramfs... [ 10.371797][ T1] Freeing initrd memory: 9488K [ 10.376579][ T1] NetWinder Floating Point Emulator V0.97 (double precision) [ 10.385324][ T1] Initialise system trusted keyrings [ 10.390594][ T1] Key type blacklist registered [ 10.395549][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 10.402838][ T1] zbud: loaded [ 10.407448][ T1] NFS: Registering the id_resolver key type [ 10.413291][ T1] Key type id_resolver registered [ 10.418148][ T1] Key type id_legacy registered [ 10.422904][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 10.430304][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.437828][ T1] jffs2: version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc. [ 10.446064][ T1] *** VALIDATE jffs2 *** [ 10.450148][ T1] fuse: init (API version 7.31) [ 10.454880][ T1] *** VALIDATE fuse *** [ 10.458873][ T1] *** VALIDATE fuse *** [ 10.463307][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 10.470690][ T1] orangefs_init: module version upstream loaded [ 10.476754][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 10.547045][ T1] async_tx: api initialized (async) [ 10.552198][ T1] Key type asymmetric registered [ 10.556968][ T1] Asymmetric key parser 'x509' registered [ 10.562666][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 10.572635][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 10.582335][ T1] mvebu-gpio f1010140.gpio: IRQ index 3 not found [ 10.589373][ T1] mv_xor f1060800.xor: Marvell shared XOR driver [ 10.651439][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 10.662421][ T1] mv_xor f1060900.xor: Marvell shared XOR driver [ 10.731420][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 10.742716][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 10.751289][ T1] printk: console [ttyS0] disabled [ 10.756330][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 10416666) is a 16550A [ 10.766070][ T1] printk: console [ttyS0] enabled [ 10.766070][ T1] printk: console [ttyS0] enabled [ 10.775834][ T1] printk: bootconsole [earlycon0] disabled [ 10.775834][ T1] printk: bootconsole [earlycon0] disabled [ 10.787973][ T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 26, base_baud = 10416666) is a 16550A [ 10.807256][ T1] loop: module loaded [ 10.811870][ T1] sata_mv f1080000.sata: slots 32 ports 2 [ 10.821380][ T1] scsi host0: sata_mv [ 10.825884][ T1] scsi host1: sata_mv [ 10.830009][ T1] ata1: SATA max UDMA/133 irq 33 [ 10.834849][ T1] ata2: SATA max UDMA/133 irq 33 [ 10.841014][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 10.848032][ T1] nand: Hynix H27U1G8F2BTR-BC [ 10.852639][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 10.860919][ T1] Scanning device for bad blocks [ 10.952907][ T1] Bad eraseblock 783 at 0x0000061e0000 [ 10.984974][ T1] 7 fixed-partitions partitions found on MTD device orion_nand [ 10.992363][ T1] Creating 7 MTD partitions on "orion_nand": [ 10.998178][ T1] 0x000000000000-0x000000100000 : "u-boot" [ 11.005519][ T1] 0x000000100000-0x000000600000 : "uImage" [ 11.012821][ T1] 0x000000600000-0x000000b00000 : "ramdisk" [ 11.020138][ T1] 0x000000b00000-0x000006f00000 : "image" [ 11.027803][ T1] 0x000006f00000-0x000007900000 : "mini firmware" [ 11.035683][ T1] 0x000007900000-0x000007e00000 : "config" [ 11.042971][ T1] 0x000007e00000-0x000008000000 : "my-dlink" [ 11.051882][ T1] libphy: Fixed MDIO Bus: probed [ 11.057615][ T1] libphy: orion_mdio_bus: probed [ 11.078707][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 11.088343][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 11.097975][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.105336][ T1] ehci-pci: EHCI PCI platform driver [ 11.110598][ T1] ehci-orion: EHCI orion driver [ 11.115515][ T1] orion-ehci f1050000.ehci: EHCI Host Controller [ 11.121796][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 11.130406][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 11.160245][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 11.167284][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 11.176317][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 11.184229][ T1] usb usb1: Product: EHCI Host Controller [ 11.189783][ T1] usb usb1: Manufacturer: Linux 5.4.2-kirkwood-tld-1 ehci_hcd [ 11.197080][ T1] usb usb1: SerialNumber: f1050000.ehci [ 11.203251][ T1] hub 1-0:1.0: USB hub found [ 11.207727][ T1] hub 1-0:1.0: 1 port detected [ 11.213216][ T1] usbcore: registered new interface driver usb-storage [ 11.220393][ T1] mousedev: PS/2 mouse device common for all mice [ 11.340269][ T118] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.349684][ T118] ata1.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133 [ 11.357171][ T118] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 11.367329][ T118] ata1.00: configured for UDMA/133 [ 11.382904][ T7] scsi 0:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5 [ 11.392883][ T122] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 11.401814][ T122] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 11.407855][ T122] sd 0:0:0:0: [sda] Write Protect is off [ 11.413540][ T122] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.439708][ T122] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.580259][ T15] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 11.731884][ T120] ata2: SATA link down (SStatus 0 SControl F300) [ 11.781293][ T15] usb 1-1: New USB device found, idVendor=0781, idProduct=5151, bcdDevice= 1.26 [ 11.790150][ T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.797996][ T15] usb 1-1: Product: Cruzer Micro [ 11.802797][ T15] usb 1-1: Manufacturer: SanDisk [ 11.807568][ T15] usb 1-1: SerialNumber: 20043515700598026046 [ 11.814386][ T15] usb-storage 1-1:1.0: USB Mass Storage device detected [ 11.821683][ T15] scsi host2: usb-storage 1-1:1.0 [ 12.250267][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 12.256531][ T1] i2c /dev entries driver [ 12.261639][ T1] device-mapper: uevent: version 1.0.3 [ 12.267263][ T1] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 12.276892][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 12.284170][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 12.291501][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 12.298862][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 12.305652][ T1] device-mapper: raid: Loading target version 1.14.0 [ 12.313910][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 12.320331][ T1] exFAT: Version 1.3.0 [ 12.324338][ T1] drop_monitor: Initializing network drop monitor service [ 12.331623][ T1] NET: Registered protocol family 17 [ 12.337019][ T1] Key type dns_resolver registered [ 12.342531][ T1] registered taskstats version 1 [ 12.347306][ T1] Loading compiled-in X.509 certificates [ 12.352919][ T1] zswap: loaded using pool lzo/zbud [ 12.358221][ T1] Key type ._fscrypt registered [ 12.362946][ T1] Key type .fscrypt registered [ 12.475916][ T1] Key type big_key registered [ 12.528506][ T1] Key type encrypted registered [ 12.536379][ T1] hctosys: unable to open rtc device (rtc0) [ 12.545680][ T1] Freeing unused kernel memory: 1024K [ 12.571090][ T1] Checked W+X mappings: passed, no W+X pages found [ 12.577425][ T1] Run /init as init process Loading, please wait... Starting version 241 [ 12.891287][ T22] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 [ 12.915977][ T122] sd 2:0:0:0: [sdb] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 12.935117][ T122] sd 2:0:0:0: [sdb] Write Protect is off [ 12.954110][ T122] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 12.987849][ T122] sdb: sdb1 [ 13.006100][ T122] sd 2:0:0:0: [sdb] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.33.1 [/sbin/fsck.ext3 (1) -- /dev/sdb1] fsck.ext3 -a -C0 /dev/sdb1 rootfs: clean, 18066/122160 files, 206459/488192 blocks done. [ 24.667731][ T199] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 24.696866][ T199] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.93 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting hotplug events dispatcher: systemd-udevd. ok [....] Synthesizing the initial hotplug events (subsystems)...done. [....] Synthesizing the initial hotplug events (devices)...[ 27.836288][ T378] input: gpio_keys as /devices/platform/gpio_keys/input/input0 done. [....] Waiting for /dev to be fully populated...[ 28.108159][ T379] systemd-udevd[379]: Using default interface naming scheme 'v240'. [ 28.297272][ T379] systemd-udevd[379]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 28.381119][ T380] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range [ 28.486272][ T380] watchdog: f1020300.watchdog-timer: falling back to default timeout (25) [ 28.631661][ C0] random: crng init done [ 28.650804][ T380] orion_wdt f1020300.watchdog-timer: IRQ index 1 not found [ 28.681608][ T420] usbcore: registered new interface driver uas [ 28.753977][ T382] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 28.804485][ T380] orion_wdt: Initial timeout 25 sec [ 28.843197][ T382] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 29.218920][ T399] systemd-udevd[399]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 29.291121][ T378] marvell-cesa f1030000.crypto: CESA device successfully registered done. [....] Setting hostname to 'debian'...done. [....] Activating swap:. ok [ 31.751607][ T611] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [info] Will now check all file systems. fsck from util-linux 2.33.1 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. ok [....] Cleaning up temporary files...[....] Cleaning /tmp...done. /tmp. ok [....] Will now mount local filesystems:. ok [....] Will now activate swapfile swap:done. [....] Checking minimum space in /tmp...done. [....] Cleaning up temporary files.... ok [....] Starting Setting kernel variables: sysctl. ok [....] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:50:43:00:02:02 Sending on LPF/eth0/00:50:43:00:02:02 Sending on Socket/fallback DHCPREQUEST for 10.0.1.185 on eth0 to 255.255.255.255 port 67 [ 38.449372][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPREQUEST for 10.0.1.185 on eth0 to 255.255.255.255 port 67 DHCPACK of 10.0.1.185 from 10.0.1.1 bound to 10.0.1.185 -- renewal in 39666 seconds. [ 40.117451][ T1165] NET: Registered protocol family 10 [ 40.124361][ T1165] Segment Routing with IPv6 done. [....] Starting RPC port mapper daemon: rpcbind. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Cleaning up temporary files.... ok INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1376 (syslogd) . ok [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1403 (klogd) . ok [....] Starting system message bus: dbus. ok [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok [....] Starting NFS common utilities: statd idmapd. ok [....] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting NTP server: ntpd. ok [....] Starting OpenBSD Secure Shell server: sshd. ok [....] Running local boot scripts (/etc/rc.local). ok Debian GNU/Linux 10 debian ttyS0 debian login: root Password: Last login: Thu Jan 1 01:00:48 BST 1970 on ttyS0 Linux debian 5.4.2-kirkwood-tld-1 #1.0 PREEMPT Sat Dec 14 15:53:53 PST 2019 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~#
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 08, 2020 11:28PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 09, 2020 12:14PM |
Registered: 10 years ago Posts: 13 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 05:45AM |
Admin Registered: 13 years ago Posts: 18,821 |
which fan_control
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 06:51AM |
Registered: 10 years ago Posts: 13 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 08:48AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 04:59PM |
Registered: 10 years ago Posts: 13 |
** MARVELL BOARD: DB-88F6702A-BP LE U-Boot 1.1.4 (Apr 19 2012 - 11:21:19) Marvell version: 3.6.0.DNS-320B.01 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz SysClock = 400Mhz , TClock = 166Mhz DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:128 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME] Hit any key to stop autoboot: 0 Marvell>> setenv bootargs 'root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none' Marvell>> Marvell>> setenv bootcmd 'nand read.e 0xa00000 0x100000 0x300000;nand read.e 0xf00000 0x600000 0x300000;bootm 0xa00000 0xf00000' Marvell>> Marvell>> boot NAND read: device 0 offset 0x100000, size 0x300000 load addr .... =a00000 3145728 bytes read: OK NAND read: device 0 offset 0x600000, size 0x300000 load addr .... =f00000 3145728 bytes read: OK ## Booting image at 00a00000 ... Image Name: Linux-2.6.31.8 Created: 2012-01-17 10:46:18 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2610908 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 00f00000 ... Image Name: Ramdisk Created: 2012-07-06 11:53:44 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 1750186 Bytes = 1.7 MB Load Address: 00e00000 Entry Point: 00e00000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux.................................................................................................................................................................. Linux version 2.6.31.8 (jack@swtest5) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #3 Tue Jan 17 18:46:16 CST 2012 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping off. Total pages: 32512 Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none PID hash table entries: 512 (order: 9, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 115468KB available (4924K code, 334K data, 136K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 128MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PEX1_MEM ....no such PEX1_IO ....no such INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.1.3_patch29)-- DB-88F6702A-BP Soc: 88F6702 A1 LE Detected Tclk 166666667 and SysClk 400000000 MV Buttons Device Load Marvell USB EHCI Host controller #0: c403e740 PEX0 interface detected no Link. PCI: bus0: Fast back to back transfers enabled mvPexLocalBusNumSet: ERR. Invalid PEX interface 1 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 1708K RTC has been updated!!! rtc mv_rtc: rtc core: registered kw-rtc as rtc0 RTC registered cpufreq: Init kirkwood cpufreq driver XOR registered 4 channels XOR 2nd invalidate WA enabled cesadev_init(c000ed5c) mvCesaInit: sessions=640, queue=64, pSram=f0000000 MV Buttons Driver Load VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/O]. JFFS2 version 2.2. (NAND) ?© 2001-2006 Red Hat, Inc. fuse init (API version 7.12) msgmni has been set to 229 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for lzma (lzma-generic) alg: No test for stdrng (krng) alg: No test for hmac(digest_null) (hmac(digest_null-generic)) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) Initializing ths8200_init Initializing dove_adi9889_init Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A brd: module loaded loop: module loaded Integrated Sata device found IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 2 Giga ports supported o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload (TSO) supported o Large Receive offload (LRO) supported o Receive checksum offload supported o Transmit checksum offload supported o Network Fast Processing (Routing) supported - (Disabled) o Driver ERROR statistics enabled o Proc tool API enabled o SKB Reuse supported - (Disabled) o SKB Recycle supported - (Disabled) o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): o register under mv88fx_eth platform o egiga0, ifindex = 2, GbE port = 0 Warning: Giga 1 is Powered Off mvFpRuleDb (c4569000): 1024 entries, 4096 bytes Counter=0, opIdx=6, overhead=16 Counter=1, opIdx=2, overhead=0 Counter=2, opIdx=1, overhead=18 Counter=3, opIdx=2, overhead=0 NAND device: Manufacturer ID: 0xad, Chip ID: 0xf1 (Hynix NAND 128MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 783 at 0x0000061e0000 Using static partition definition Creating 7 MTD partitions on "nand_mtd": 0x000000000000-0x000000100000 : "u-boot" 0x000000100000-0x000000600000 : "uImage" 0x000000600000-0x000000b00000 : "ramdisk" 0x000000b00000-0x000006f00000 : "image" 0x000006f00000-0x000007900000 : "rescue firmware" 0x000007900000-0x000007e00000 : "config" 0x000007e00000-0x000008000000 : "my-dlink" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc mv_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: gzip image found at block 0 usb 1-1: new high speed USB device using ehci_marvell and address 2 EXT4-fs (ram0): no journal EXT4-fs (ram0): delayed allocation enabled EXT4-fs: mballoc enabled EXT4-fs (ram0): mounted filesystem without journal VFS: Mounted root (ext4 filesystem) on device 1:0. Freeing init memory: 136K init started: BusyBox v1.11.2 (2012-06-28 16:57:05 CST) starting pid 538, tty '': '/etc/rc.sh' ** Mounting /etc/fstab umount: proc: not mounted umount: proc: not mounted umount: /usr/local/modules: not mounted usb 1-1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices sh: can't open /usr/sbin/pre_usb.sh sh: can't open /usr/sbin/pre_usb.sh insmod: applet not found umount: /usr/local/tmp/image.cfs: not found umount: /usr/local/tmp: not mounted first good block is 0 image len = 25034752 , image checksum = 8b73f1e3 scsi 2:0:0:0: Direct-Access SanDisk Cruzer Micro 1.26 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 3908352 512-byte logical blocks: (2.00 GB/1.86 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sd 2:0:0:0: Attached scsi generic sg0 type 0 sda1 sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] Attached SCSI removable disk dump image checksum=8b73f1e3 rmmod: applet not found ln: /lib/./libnss_dns-2.8.so: File exists ln: /lib/./libnss_dns.so.2: File exists ln: /usr/sbin/./system_init: File exists mknod: /dev/REG: File exists hardware init GbE port 0: TxEnable WA - Enabled, deep=1, tx_en_bk=1 mtd check v1.01.05292012 /usr/local/config free size is 4739072 ** copy config files cp: cannot stat '/usr/local/config/user.log.old': No such file or directory usbcore: registered new interface driver usblp ** set loopback interface old ver:20120712 new ver:20120712 first good block is 0 ECC failed: 0 ECC corrected: 0 Number of bad blocks: 0 Number of bbt blocks: 0 Block size 131072, page size 2048, OOB sizegiga0: mac address changed e 64 Dumping data starting at 0x00000000 and ending at 0x00000800... mac1 = 78:54:2E:29:72:2A lan0:ifconfig egiga0 hw ether 78:54:2E:29:72:2A egiga0: link down egiga0: started DNS-320B function egiga0: link up, full duplex, speed 1 Gbps NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions IPv4 over IPv4 tunneling driver tunl0: Disabled Privacy Extensions net.ipv6.conf.default.accept_dad = 2 net.ipv6.conf.egiga0.accept_dad = 2 net.ipv6.conf.default.dad_transmits = 1 net.ipv6.conf.egiga0.dad_transmits = 1 net.ipv6.conf.default.forwarding = 0 net.ipv6.conf.default.accept_redirects = 1 *** execute rc.init.sh awk: /var/run/udhcpc0.pid: No such file or directory udhcpc (v1.11.2) started Sending discover... Sending select for 10.0.1.187... Lease of 10.0.1.187 obtained, lease time 86400 sh: you need to specify whom to kill crond[1336]: crond (busybox 1.11.2) started, log level 8 deleting routers route: SIOCDELRT: No such process call load_module network ip: RTNETLINK answers: Operation not supported ip: RTNETLINK answers: Operation not supported crond[1372]: crond (busybox 1.11.2) started, log level 8 *** get Time from rtc and set it into system **** rtc: RTC time = 2000/1/7 Sat 1:19:35 Fri Jan 7 01:19:35 UTC 2000 *** set Time Zone **** Fri Jan 7 01:19:35 GMT 2000 *** Do not adjust RTC time *** Module IPC SERVER Version:(1.00.20090706) ads=0 created mail daemon thread 0 ifconfig: egiga1: error fetching interface information: Device not found Command: wget -T5 -t3 -q http://cfaj.freeshell.org/ipaddr.cgi -O /tmp/exip.0 do nothing ls: /tmp/HDDBlackList_a: No such file or directory FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: invalid media value (0x00) VFS: Can't find a valid FAT filesystem on dev sda. mount: wrong fs type, bad option, bad superblock on /dev/sda, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so FAT: Unrecognized mount option "iocharset=utf8" or missing value mount: you must specify the filesystem type VFS: Can't find ext3 filesystem on dev sda. mount: wrong fs type, bad option, bad superblock on /dev/sda, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so mount: unknown filesystem type 'ext2' NTFS signature is missing. Failed to mount '/dev/sda': Invalid argument The device '/dev/sda' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: bogus number of reserved sectors VFS: Can't find a valid FAT filesystem on dev sda1. mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so EXT3-fs: Unrecognized mount option "umask=0" or missing value mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with writeback data mode. find: /tmp/cardreader: No such file or directory system daemon v1.03.0529212 chk_io v1.02.20120118 cp: cannot stat '/usr/local/config/ups_slave.dat': No such file or directory mfg_start version 1.00(2012-07-12) Fri Jan 7 01:19:57 2000 Please press Enter to activate this console. usb_dir </mnt/USB/USB1_a1> filename_mfg mfg_DNS_320B check /mnt/USB/USB1_a1/mfg_DNS_320B file open /mnt/USB/USB1_a1/mfg_DNS_320B file failed 2000-01-07 01:19:55: (../../src/log.c.166) server started 2000-01-07 01:19:57: (../../src/server.c.1396) [note] graceful shutdown started call load_module 2000-01-07 01:19:57: (../../src/log.c.166) server started 2000-01-07 01:19:57: (../../src/server.c.1512) server stopped by UID = 0 PID = 1695 $Shutting down P2P services: P2P share lib connect: Connection refused *** APKG Daemon is starting ... *** /usr/sbin/load_module: line 380: mmfc: not found Version: [v1.00.20111111] OK: Inotify Multimedia File monitor Established. sh: you need to specify whom to kill killall: chk_blockip: no process killed name : [USBDisk1_1] path : [/mnt/USB/USB1_a1] samba share name : [USBDisk1_1] Shutting down AFP services: Shutting down AFP services: testtStop NFS Deamon.... Stop NFS mountd.... Unload Driver.... Stop Portmap. No NFS information . Stop NFS Server OVER. LED_POWER_ON **pressed ENTER** starting pid 1759, tty '/dev/ttyS0': '/bin/login' Password of admin: BusyBox v1.11.2 (2012-06-28 16:57:05 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. #
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 06:27PM |
Registered: 10 years ago Posts: 13 |
# fan_control --help *** Fan Cobtrol Help Message *** fan_control b c: for NAS booting fan_control 0 d : [auto: high/low/stop] open debug msg fan_control 1 d : [auto: high/low] open debug msg fan_control 2 d : [always-high] open debug msg fan_control 0 c : [auto: high/low/stop] close debug msg fan_control 1 c : [auto: high/low] close debug msg fan_control 2 c : [always-high] close debug msg fan_control -L [value] : set Lower (THYST) fan_control -H [value] : set Upper(TOS) fan_control -g 0 : get current temperature fan_control -g 1 : get Lower temperature fan_control -g 2 : get Upper temperature fan_control -g 3 : get fan state fan_control -f 0 : set fan stop fan_control -f 1 : set fan speed low fan_control -f 2 : set fan speed high
# fan_control 1 d [fan_control.c:158] temperature_low=45,temperature_high=49,temperature_stop=39 [fan_control.c:325] Set Fan-Control Mode To "Auto(Low/High)" [fan_control.c:331] current temperature is 38 [fan_control.c:346] board_temper < TEMPERATURE_LOW: 45 [fan_control.c:349] Set Fan Speed To "LOW". [fan_control.c:175] fan state =1 [fan_control.c:358] sleep 60 secs 0 [fan_control.c:76] sleep duration is 60 [fan_control.c:79] 59 [fan_control.c:79] 58 [fan_control.c:79] 57 ... [fan_control.c:79] 2 [fan_control.c:79] 1 [fan_control.c:79] 0 [fan_control.c:331] current temperature is 38 [fan_control.c:346] board_temper < TEMPERATURE_LOW: 45 [fan_control.c:175] fan state =1 [fan_control.c:358] sleep 60 secs 0 [fan_control.c:76] sleep duration is 60 [fan_control.c:79] 59 [fan_control.c:79] 58 [fan_control.c:79] 57 ^C
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 10, 2020 09:49PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 05:02AM |
Registered: 9 years ago Posts: 451 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 07:41AM |
Admin Registered: 13 years ago Posts: 18,821 |
#include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ..... gpio_fan { /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH &gpio1 13 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; };
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 10:50AM |
Registered: 10 years ago Posts: 13 |
Quote
rayknight
Have you tried running pwmconfig to see if it detects PWM controls and is able to control the fan?
root@debian:~# pwmconfig # pwmconfig revision $Revision$ ($Date$) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. /usr/sbin/pwmconfig: No sensors found! (modprobe sensor modules?)
Quote
bodhi
Looks like the fan could be GPIO base, too.
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 11:34AM |
Registered: 10 years ago Posts: 13 |
root@debian:~/dns320_root/usr/local/modules/usrsbin# PATH=$PATH:. LD_LIBRARY_PATH=/root/dns320_root/usr/local/modules/usrlib/:/root/dns320_root/usr/local/modules/lib ./fan_control *** Fan Cobtrol Help Message *** fan_control b c: for NAS booting fan_control 0 d : [auto: high/low/stop] open debug msg fan_control 1 d : [auto: high/low] open debug msg fan_control 2 d : [always-high] open debug msg fan_control 0 c : [auto: high/low/stop] close debug msg fan_control 1 c : [auto: high/low] close debug msg fan_control 2 c : [always-high] close debug msg fan_control -L [value] : set Lower (THYST) fan_control -H [value] : set Upper(TOS) fan_control -g 0 : get current temperature fan_control -g 1 : get Lower temperature fan_control -g 2 : get Upper temperature fan_control -g 3 : get fan state fan_control -f 0 : set fan stop fan_control -f 1 : set fan speed low fan_control -f 2 : set fan speed high root@debian:~/dns320_root/usr/local/modules/usrsbin# root@debian:~/dns320_root/usr/local/modules/usrsbin# root@debian:~/dns320_root/usr/local/modules/usrsbin# root@debian:~/dns320_root/usr/local/modules/usrsbin# PATH=$PATH:. LD_LIBRARY_PATH=/root/dns320_root/usr/local/modules/usrlib/:/root/dns320_root/usr/local/modules/lib ./fan_control -f 1 up_send_ctl: /root/dns320_root/usr/local/modules/lib/libz.so.1: no version information available (required by /usr/lib/arm-linux-gnueabi/libxml2.so.2) up_send_ctl: /root/dns320_root/usr/local/modules/lib/libz.so.1: no version information available (required by /usr/lib/arm-linux-gnueabi/libxml2.so.2) up_send_ctl: relocation error: /usr/lib/arm-linux-gnueabi/libxml2.so.2: symbol gzopen64 version ZLIB_1.2.3.3 not defined in file libz.so.1 with link time reference root@debian:~/dns320_root/usr/local/modules/usrsbin#
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 12:26PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 12:33PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 03:46PM |
Registered: 10 years ago Posts: 13 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 04:57PM |
Registered: 10 years ago Posts: 13 |
# export DEBUG=0 # python fan-daemon.py Temp: 38 Speed: 0
LOW_TEMP = 34 #45 HIGH_TEMP = 36 #50 HYSTERESIS = 2
# python fan-daemon.py Temp: 36 Speed: 0 Temp: 36 Speed: 2 Temp: 36 Speed: 2 ... I decided to use a hand held travel fan to blow inside the case to speed the cooling up a little :) Temp: 35 Speed: 2 Temp: 35 Speed: 2 Temp: 34 Speed: 2 Temp: 33 Speed: 2 Temp: 33 Speed: 1 Temp: 32 Speed: 1 Temp: 31 Speed: 1 Temp: 31 Speed: 0 Temp: 31 Speed: 0 Temp: 31 Speed: 0
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 10:22PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
This describes a Weltrend MCU on the DNS-327L which is similar to the DNS-320L. I checked on my board and it looks like I have the same.
Quote
https://github.com/martignlo/DNS-320L
The daemon references this python script
To start with I've tried the python script and it works!
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 11, 2020 11:02PM |
Registered: 9 years ago Posts: 451 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 14, 2020 04:00AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Unable to use LABEL for root fs on D-Link DNS-320 B1 January 15, 2020 09:15PM |
Registered: 9 years ago Posts: 451 |