Advice Please: Wheezy script failed at debootstrap and now NAND won't boot August 28, 2012 05:02AM |
Registered: 12 years ago Posts: 4 |
U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Block device usb 0 not supported ** Invalid boot device ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 219 MiB UBI: number of good PEBs: 1748 UBI: number of bad PEBs: 4 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 1727 UBI: total number of reserved PEBs: 21 UBI: number of PEBs reserved for bad PEB handling: 17 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19 Error reading superblock on volume 'ubi:rootfs'! ** Block device usb 0 not supported ** Block device usb 1 not supported ** Block device usb 2 not supported ** Block device usb 3 not supported ** Block device usb 0 not supported ** Block device usb 0 not supported Wrong Image Format for bootm command ERROR: can't get kernel image! stopping USB.. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: ....... read_nand_cached: error reading nand off 0xa56200 size 8192 bytes . read_nand_cached: error reading nand off 0x1b00000 size 8192 bytes done. read_nand_cached: error reading nand off 0xa55a00 size 8192 bytes off = 0xa54ee0 magic 0x1985 type 0xe002 node.totlen = 3051 ### JFFS2 load complete: 524288 bytes loaded to 0x800000 ## Starting application at 0x00800200 ...
Re: Advice Please: Wheezy script failed at debootstrap and now NAND won't boot August 28, 2012 09:38PM |
Registered: 12 years ago Posts: 4 |
Re: Advice Please: Wheezy script failed at debootstrap and now NAND won't boot August 28, 2012 10:30PM |
Admin Registered: 14 years ago Posts: 304 |
Re: Advice Please: Wheezy script failed at debootstrap and now NAND won't boot August 29, 2012 06:04AM |
Registered: 12 years ago Posts: 4 |