Welcome! Log In Create A New Profile

Advanced

Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2

Posted by cergei 
Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 25, 2020 12:09PM
Item 4 on creating USB rootfs. Excuse me. I created a new theme <<Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2>> and I dont know if it is displayed correctly
root@cergei-MS-N031:/home/cergei# cd /media/cergei/rootfs/boot
root@cergei-MS-N031:/media/cergei/rootfs/boot# cp -a zImage-5.2.9-kirkwood-tld-1 zImage.fdt
root@cergei-MS-N031:/media/cergei/rootfs/boot# cat dts/kirkwood-netgear_stora_ms2000.dtb >> zImage.fdt
root@cergei-MS-N031:/media/cergei/rootfs/boot# mv uImage uImage.orig
root@cergei-MS-N031:/media/cergei/rootfs/boot# mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.2.9-kirkwood-tld-1 -d zImage.fdt uImage
Image Name:   Linux-5.2.9-kirkwood-tld-1
Created:      Tue Feb 25 21:35:15 2020
Image Type:   ARM Linux Kernel Image (uncompressed)
Data Size:    4975115 Bytes = 4858.51 KiB = 4.74 MiB
Load Address: 00008000
Entry Point:  00008000
root@cergei-MS-N031:/media/cergei/rootfs/boot# sync
root@cergei-MS-N031:/media/cergei/rootfs/boot#

=====
moderator edit: please use code tags to display log



Edited 3 time(s). Last edit at 02/25/2020 03:44PM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 25, 2020 03:46PM
cergei,

It looks fine. Now bring the USB rootfs to the Stora box, start serial console and boot with it. I expect it to stop at some point, but will show you some adjustment.

Please post the entire serial console log (use code tags to make it easier to read).

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 02/25/2020 03:54PM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 25, 2020 10:23PM
Hello. Connected to a serial port, and that 's how you said at some point the download stopped. The blue LED continues to flash. Trying to implement your recommendations exactly, but because of inexperience it is not all immediately possible.

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: MV88F6281 Rev 3 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: 4b565fb7, Calculated CRC: 4b565fb7

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
................................................................................                                                                             ......................
................................................................................                                                                             ................................................................................                                                                             ............................................
....
.......................................................................

4975179 bytes read
....
.
......
............
.........................
...................................................
................................................................................                                                                             ......................
................................................................................                                                                             ................................................................................                                                                             ............................................
....
................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             .........
................................................................................                                                                             ............................................

9713936 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-25  17:35:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975115 Bytes =  4.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes =  9.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

More than half an hour has passed, and the download does not continue. So the blue LED flashes. What am I supposed to do now? Thank you for your help!



Edited 1 time(s). Last edit at 02/25/2020 10:42PM by cergei.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 12:40AM
cergei,

> blue LED continues to flash. Trying to implement
> your recommendations exactly, but because of
> inexperience it is not all immediately
> possible.

Don't worry! you will be an expert given time.

Adjust the envs:

setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x2100000 /boot/uInitrd'
setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay=10 earlyprintk=serial; run bootcmd_usb; bootm 0x800000 0x2100000; reset'
setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)'

And then try booting:
boot

After you have tested the envs above a few boots, come back to serial console and make it permanent:

setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage; ext2load usb 0:1 0x2100000 /boot/uInitrd'
setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay=10 earlyprintk=serial; run bootcmd_usb; bootm 0x800000 0x2100000; reset'
setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)'
saveenv

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 02:30AM
Cool!!! I see it all worked out. And then "After logging into this rootf for the first time, remember to generate a new SSH key to make it your own unique rootfs. And also update your rootfs to get the latest Debian package security updates: "Did it

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: MV88F6281 Rev 3 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: 4b565fb7, Calculated CRC: 4b565fb7

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
Marvell>> setenv bootcmd_usb 'usb start; ext2load usb 0:1 0x800000 /boot/uImage;                                                                              ext2load usb 0:1 0x2100000 /boot/uInitrd'
Marvell>> setenv bootcmd 'setenv bootargs $(console) root=LABEL=rootfs rootdelay                                                                             =10 earlyprintk=serial; run bootcmd_usb; bootm 0x800000 0x2100000; reset'
Marvell>> setenv console 'console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(ub                                                                             oot),0xff00000@0x100000(root)'
Marvell>> saveenv
Saving Environment to NAND...
Erasing Nand...Writing to Nand... done
Marvell>> boot
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
................................................................................                                                                             ......................
................................................................................                                                                             ................................................................................                                                                             ............................................
....
.......................................................................

4975179 bytes read
....
.
......
............
.........................
...................................................
................................................................................                                                                             ......................
................................................................................                                                                             ................................................................................                                                                             ............................................
....
................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             ................................................................................                                                                             .........
................................................................................                                                                             ............................................

9713936 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-25  17:35:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975115 Bytes =  4.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes =  9.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[    0.000000][    T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000][    T0] CPU: VIVT data cache, VIVT instruction cache
[    0.000000][    T0] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writeback
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[    0.000000][    T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][    T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000][    T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved)
[    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000011][    T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.008526][    T0] Switching to timer-based delay loop, resolution 5ns
[    0.015990][    T0] Console: colour dummy device 80x30
[    0.021209][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.032441][    T0] pid_max: default: 32768 minimum: 301
[    0.038168][    T0] LSM: Security Framework initializing
[    0.043730][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051081][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.059844][    T0] *** VALIDATE proc ***
[    0.064129][    T0] *** VALIDATE cgroup1 ***
[    0.068395][    T0] *** VALIDATE cgroup2 ***
[    0.072805][    T0] CPU: Testing write buffer coherency: ok
[    0.080396][    T1] Setting up static identity map for 0x100000 - 0x100058
[    0.087579][    T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.093780][    T1] rcu: Hierarchical SRCU implementation.
[    0.103154][    T1] devtmpfs: initialized
[    0.113997][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.124584][    T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.131733][    T1] xor: measuring software checksum speed
[    0.228560][    T1]    arm4regs  :   902.800 MB/sec
[    0.328562][    T1]    8regs     :   542.000 MB/sec
[    0.428553][    T1]    32regs    :   787.600 MB/sec
[    0.433425][    T1] xor: using function: arm4regs (902.800 MB/sec)
[    0.439629][    T1] prandom: seed boundary self test passed
[    0.450251][    T1] prandom: 100 self tests passed
[    0.455031][    T1] pinctrl core: initialized pinctrl subsystem
[    0.462698][    T1] NET: Registered protocol family 16
[    0.468516][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.477083][    T1] audit: initializing netlink subsys (disabled)
[    0.484642][   T14] audit: type=2000 audit(0.470:1): state=initialized audit_enabled=0 res=1
[    0.493218][    T1] cpuidle: using governor ladder
[    0.498088][    T1] cpuidle: using governor menu
[    0.503420][    T1] Feroceon L2: Enabling L2
[    0.507715][    T1] Feroceon L2: Cache support initialised.
[    0.520481][    T1] No ATAGs?
[    2.568534][    C0] random: fast init done
[    7.679142][   T71] alg: No test for lzo-rle (lzo-rle-generic)
[    7.685371][   T73] alg: No test for lzo-rle (lzo-rle-scomp)
[    7.869304][    T1] raid6: int32x8  gen()   106 MB/s
[    8.038940][    T1] raid6: int32x8  xor()    72 MB/s
[    8.208631][    T1] raid6: int32x4  gen()   107 MB/s
[    8.378723][    T1] raid6: int32x4  xor()    69 MB/s
[    8.548807][    T1] raid6: int32x2  gen()   110 MB/s
[    8.718622][    T1] raid6: int32x2  xor()    78 MB/s
[    8.889009][    T1] raid6: int32x1  gen()    83 MB/s
[    9.058679][    T1] raid6: int32x1  xor()    57 MB/s
[    9.063621][    T1] raid6: using algorithm int32x2 gen() 110 MB/s
[    9.069705][    T1] raid6: .... xor() 78 MB/s, rmw enabled
[    9.075163][    T1] raid6: using intx1 recovery algorithm
[    9.080849][    T1] vgaarb: loaded
[    9.084840][    T1] SCSI subsystem initialized
[    9.089906][    T1] usbcore: registered new interface driver usbfs
[    9.096125][    T1] usbcore: registered new interface driver hub
[    9.102262][    T1] usbcore: registered new device driver usb
[    9.108192][    T1] pps_core: LinuxPPS API ver. 1 registered
[    9.113856][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    9.123679][    T1] PTP clock support registered
[    9.129913][    T1] clocksource: Switched to clocksource orion_clocksource
[   10.381941][    T1] VFS: Disk quotas dquot_6.6.0
[   10.386635][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.406146][    T1] NET: Registered protocol family 2
[   10.412209][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[   10.420637][    T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   10.428274][    T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   10.435368][    T1] TCP: Hash tables configured (established 1024 bind 1024)
[   10.442549][    T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.449064][    T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.456303][    T1] NET: Registered protocol family 1
[   10.462126][    T1] RPC: Registered named UNIX socket transport module.
[   10.468719][    T1] RPC: Registered udp transport module.
[   10.474188][    T1] RPC: Registered tcp transport module.
[   10.479570][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.486707][    T1] PCI: CLS 0 bytes, default 32
[   10.491609][    T1] Trying to unpack rootfs image as initramfs...
[   11.503656][    T1] Freeing initrd memory: 9488K
[   11.508513][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.517248][    T1] Initialise system trusted keyrings
[   11.522466][    T1] Key type blacklist registered
[   11.527411][    T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   11.534723][    T1] zbud: loaded
[   11.539258][    T1] NFS: Registering the id_resolver key type
[   11.545111][    T1] Key type id_resolver registered
[   11.550030][    T1] Key type id_legacy registered
[   11.554732][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   11.562129][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.569490][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.577513][    T1] fuse: init (API version 7.31)
[   11.582694][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   11.590059][    T1] orangefs_init: module version upstream loaded
[   11.596127][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   11.625243][    T1] async_tx: api initialized (async)
[   11.630425][    T1] Key type asymmetric registered
[   11.635197][    T1] Asymmetric key parser 'x509' registered
[   11.640896][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   11.650810][    T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   11.661216][    T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   11.669456][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.675706][    T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   11.683305][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   11.690387][    T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   11.697092][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   11.706104][    T1] PCI: bus0: Fast back to back transfers disabled
[   11.712402][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   11.722615][    T1] PCI: bus1: Fast back to back transfers enabled
[   11.728787][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   11.736328][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
[   11.744246][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[   11.750639][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[   11.810914][    T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.821350][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[   11.890911][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.901665][    T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.910288][    T1] printk: console [ttyS0] disabled
[   11.915305][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[   11.925041][    T1] printk: console [ttyS0] enabled
[   11.925041][    T1] printk: console [ttyS0] enabled
[   11.934900][    T1] printk: bootconsole [earlycon0] disabled
[   11.934900][    T1] printk: bootconsole [earlycon0] disabled
[   11.955604][    T1] loop: module loaded
[   11.960220][    T1] sata_mv f1080000.sata: slots 32 ports 2
[   11.969193][    T1] scsi host0: sata_mv
[   11.973845][    T1] scsi host1: sata_mv
[   11.978065][    T1] ata1: SATA max UDMA/133 irq 33
[   11.982954][    T1] ata2: SATA max UDMA/133 irq 33
[   11.988920][    T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[   11.996170][    T1] nand: Samsung NAND 256MiB 3,3V 8-bit
[   12.001542][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   12.009860][    T1] Scanning device for bad blocks
[   12.071077][    T1] Bad eraseblock 526 at 0x0000041c0000
[   12.076577][    T1] Bad eraseblock 528 at 0x000004200000
[   12.081997][    T1] Bad eraseblock 529 at 0x000004220000
[   12.087387][    T1] Bad eraseblock 530 at 0x000004240000
[   12.137121][    T1] Bad eraseblock 945 at 0x000007620000
[   12.142539][    T1] Bad eraseblock 946 at 0x000007640000
[   12.147931][    T1] Bad eraseblock 947 at 0x000007660000
[   12.256843][    T1] Bad eraseblock 1912 at 0x00000ef00000
[   12.276824][    T1] 2 cmdlinepart partitions found on MTD device orion_nand
[   12.283870][    T1] Creating 2 MTD partitions on "orion_nand":
[   12.289770][    T1] 0x000000000000-0x000000100000 : "uboot"
[   12.297025][    T1] 0x000000100000-0x000010000000 : "root"
[   12.306654][    T1] libphy: Fixed MDIO Bus: probed
[   12.311563][  T112] ata1: SATA link down (SStatus 0 SControl F300)
[   12.318773][    T1] libphy: orion_mdio_bus: probed
[   12.323687][    T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[   12.352155][    T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.360360][    T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[   12.661599][  T114] ata2: SATA link down (SStatus 0 SControl F300)
[   13.080685][    T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c4:3d:c7:4f:6c:92
[   13.090340][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.097627][    T1] ehci-pci: EHCI PCI platform driver
[   13.102894][    T1] ehci-orion: EHCI orion driver
[   13.107855][    T1] orion-ehci f1050000.ehci: EHCI Host Controller
[   13.114134][    T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   13.122808][    T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   13.150096][    T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   13.157164][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[   13.166215][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.174195][    T1] usb usb1: Product: EHCI Host Controller
[   13.179796][    T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[   13.187171][    T1] usb usb1: SerialNumber: f1050000.ehci
[   13.193346][    T1] hub 1-0:1.0: USB hub found
[   13.197875][    T1] hub 1-0:1.0: 1 port detected
[   13.203421][    T1] usbcore: registered new interface driver usb-storage
[   13.210677][    T1] mousedev: PS/2 mouse device common for all mice
[   13.569959][   T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   13.848063][   T15] usb 1-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[   13.857017][   T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.864932][   T15] usb 1-1: Product: Mass Storage Device
[   13.870382][   T15] usb 1-1: Manufacturer: JetFlash
[   13.875284][   T15] usb 1-1: SerialNumber: I3H99W8L
[   13.881148][   T15] usb-storage 1-1:1.0: USB Mass Storage device detected
[   13.888510][   T15] scsi host2: usb-storage 1-1:1.0
[   14.249959][    T1] rtc-mv f1010300.rtc: internal RTC not ticking
[   14.256284][    T1] i2c /dev entries driver
[   14.267664][    T1] rtc-pcf8563 0-0051: registered as rtc0
[   14.275061][    T1] device-mapper: uevent: version 1.0.3
[   14.280787][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   14.290519][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[   14.297784][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[   14.305213][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[   14.312701][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   14.319525][    T1] device-mapper: raid: Loading target version 1.14.0
[   14.328180][    T1] hidraw: raw HID events driver (C) Jiri Kosina
[   14.334758][    T1] drop_monitor: Initializing network drop monitor service
[   14.342171][    T1] NET: Registered protocol family 17
[   14.347625][    T1] Key type dns_resolver registered
[   14.353723][    T1] registered taskstats version 1
[   14.358544][    T1] Loading compiled-in X.509 certificates
[   14.364186][    T1] zswap: loaded using pool lzo/zbud
[   14.480034][    T1] Key type big_key registered
[   14.534966][    T1] Key type encrypted registered
[   14.543633][    T1] rtc-pcf8563 0-0051: setting system clock to 2020-02-26T11:50:52 UTC (1582717852)
[   14.557310][    T1] Freeing unused kernel memory: 1024K
[   14.590607][    T1] Checked W+X mappings: passed, no W+X pages found
[   14.597001][    T1] Run /init as init process
Loading, please wait...
Starting version 241
[   14.972454][   T23] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[   14.991258][    T7] sd 2:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   15.020099][    T7] sd 2:0:0:0: [sda] Write Protect is off
[   15.031550][    T7] sd 2:0:0:0: [sda] No Caching mode page found
[   15.037653][    T7] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.434680][    T7]  sda: sda1
[   15.444256][    T7] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   16.364268][  T172] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: clean, 15077/123392 files, 151845/493056 blocks
done.
[   26.845508][  T191] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   26.896746][  T191] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...done.
[   30.387087][  T373] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[....] Waiting for /dev to be fully populated...[   30.476231][  T370] systemd-udevd[370]: Using default interface naming scheme 'v240'.
[   30.584077][  T370] systemd-udevd[370]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   30.733434][  T374] lm75 0-0048: hwmon0: sensor 'lm75'
[   30.799586][  T390] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   30.910300][  T390] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[   30.919064][    C0] random: crng init done
[   31.085180][  T390] orion_wdt: Initial timeout 21 sec
[   31.301339][  T374] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   31.317089][  T373] marvell-cesa f1030000.crypto: CESA device successfully registered
[   31.509606][  T373] systemd-udevd[373]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[   32.994510][  T588] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.
[....] Starting RPC port mapper daemon: rpcbind[  100.339257][ T1194] NET: Registered protocol family 10
[  100.346618][ T1194] Segment Routing with IPv6
. ok
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1330 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1357 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 10 debian ttyS0

debian login: root
Password:
Last login: Wed Feb 26 03:35:16 PST 2020 on ttyS0
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#

Following question? How do I install your boot loader? Do I not understand to install it need to re-create a bootable usb flash drive from a downloaded file from DROPBOX or already from Debian SSH install? Please take me the right way.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 03:24AM
Cool!

> Following question? How do I install your
> boot loader? Do I not understand to install it
> need to re-create a bootable usb flash drive from
> a downloaded file from DROPBOX or already from
> Debian SSH install? Please take me the right way.

You can install new u-boot inside Debian SSH.

root@debian:~#

The u-boot release thread:
https://forum.doozan.com/read.php?3,12381

Remember, try kwboot (UART booting) with the new u-boot image (uboot.2017.07-tld-1.netgear_ms2110.mtd0.kwb) first as I've reccomended, to make sure you have a recovery path, in case something goes wrong during installation (power outage,....).

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 2 time(s). Last edit at 02/26/2020 03:29AM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 09:32PM

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: MV88F6281 Rev 3 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: c9d2c91b, Calculated CRC: c9d2c91b

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
.......................................................................

4975179 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
.........................................................................................................................................................................................................................................................................................................................................................................................................................
............................................................................................................................

9713936 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-25  17:35:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975115 Bytes =  4.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes =  9.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[    0.000000][    T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000][    T0] CPU: VIVT data cache, VIVT instruction cache
[    0.000000][    T0] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writeback
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[    0.000000][    T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][    T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000][    T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved)
[    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010][    T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.008527][    T0] Switching to timer-based delay loop, resolution 5ns
[    0.015990][    T0] Console: colour dummy device 80x30
[    0.021211][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.032442][    T0] pid_max: default: 32768 minimum: 301
[    0.038167][    T0] LSM: Security Framework initializing
[    0.043729][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051079][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.059843][    T0] *** VALIDATE proc ***
[    0.064133][    T0] *** VALIDATE cgroup1 ***
[    0.068405][    T0] *** VALIDATE cgroup2 ***
[    0.072810][    T0] CPU: Testing write buffer coherency: ok
[    0.080387][    T1] Setting up static identity map for 0x100000 - 0x100058
[    0.087571][    T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.093771][    T1] rcu: Hierarchical SRCU implementation.
[    0.103159][    T1] devtmpfs: initialized
[    0.114018][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.124605][    T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.131755][    T1] xor: measuring software checksum speed
[    0.228557][    T1]    arm4regs  :   902.400 MB/sec
[    0.328560][    T1]    8regs     :   542.000 MB/sec
[    0.428552][    T1]    32regs    :   787.600 MB/sec
[    0.433416][    T1] xor: using function: arm4regs (902.400 MB/sec)
[    0.439621][    T1] prandom: seed boundary self test passed
[    0.450242][    T1] prandom: 100 self tests passed
[    0.455024][    T1] pinctrl core: initialized pinctrl subsystem
[    0.462679][    T1] NET: Registered protocol family 16
[    0.468502][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.477077][    T1] audit: initializing netlink subsys (disabled)
[    0.484645][   T14] audit: type=2000 audit(0.470:1): state=initialized audit_enabled=0 res=1
[    0.493220][    T1] cpuidle: using governor ladder
[    0.498088][    T1] cpuidle: using governor menu
[    0.503423][    T1] Feroceon L2: Enabling L2
[    0.507724][    T1] Feroceon L2: Cache support initialised.
[    0.520488][    T1] No ATAGs?
[    2.568534][    C0] random: fast init done
[    7.679399][   T71] alg: No test for lzo-rle (lzo-rle-generic)
[    7.685621][   T73] alg: No test for lzo-rle (lzo-rle-scomp)
[    7.869293][    T1] raid6: int32x8  gen()   106 MB/s
[    8.038947][    T1] raid6: int32x8  xor()    72 MB/s
[    8.208661][    T1] raid6: int32x4  gen()   107 MB/s
[    8.378723][    T1] raid6: int32x4  xor()    69 MB/s
[    8.548851][    T1] raid6: int32x2  gen()   110 MB/s
[    8.718622][    T1] raid6: int32x2  xor()    78 MB/s
[    8.889008][    T1] raid6: int32x1  gen()    83 MB/s
[    9.058679][    T1] raid6: int32x1  xor()    57 MB/s
[    9.063621][    T1] raid6: using algorithm int32x2 gen() 110 MB/s
[    9.069705][    T1] raid6: .... xor() 78 MB/s, rmw enabled
[    9.075164][    T1] raid6: using intx1 recovery algorithm
[    9.080851][    T1] vgaarb: loaded
[    9.084850][    T1] SCSI subsystem initialized
[    9.089916][    T1] usbcore: registered new interface driver usbfs
[    9.096135][    T1] usbcore: registered new interface driver hub
[    9.102272][    T1] usbcore: registered new device driver usb
[    9.108203][    T1] pps_core: LinuxPPS API ver. 1 registered
[    9.113865][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    9.123687][    T1] PTP clock support registered
[    9.129928][    T1] clocksource: Switched to clocksource orion_clocksource
[   10.381981][    T1] VFS: Disk quotas dquot_6.6.0
[   10.386676][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.406182][    T1] NET: Registered protocol family 2
[   10.412250][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[   10.420678][    T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   10.428318][    T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   10.435411][    T1] TCP: Hash tables configured (established 1024 bind 1024)
[   10.442588][    T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.449108][    T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.456347][    T1] NET: Registered protocol family 1
[   10.462176][    T1] RPC: Registered named UNIX socket transport module.
[   10.468762][    T1] RPC: Registered udp transport module.
[   10.474230][    T1] RPC: Registered tcp transport module.
[   10.479605][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.486740][    T1] PCI: CLS 0 bytes, default 32
[   10.491643][    T1] Trying to unpack rootfs image as initramfs...
[   11.503706][    T1] Freeing initrd memory: 9488K
[   11.508564][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.517298][    T1] Initialise system trusted keyrings
[   11.522513][    T1] Key type blacklist registered
[   11.527446][    T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   11.534764][    T1] zbud: loaded
[   11.539295][    T1] NFS: Registering the id_resolver key type
[   11.545154][    T1] Key type id_resolver registered
[   11.550073][    T1] Key type id_legacy registered
[   11.554775][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   11.562172][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.569533][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.577558][    T1] fuse: init (API version 7.31)
[   11.582737][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   11.590100][    T1] orangefs_init: module version upstream loaded
[   11.596170][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   11.625291][    T1] async_tx: api initialized (async)
[   11.630479][    T1] Key type asymmetric registered
[   11.635249][    T1] Asymmetric key parser 'x509' registered
[   11.640949][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   11.650867][    T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   11.661260][    T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   11.669500][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.675750][    T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   11.683351][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   11.690437][    T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   11.697144][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   11.706152][    T1] PCI: bus0: Fast back to back transfers disabled
[   11.712452][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   11.722666][    T1] PCI: bus1: Fast back to back transfers enabled
[   11.728838][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   11.736379][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
[   11.744299][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[   11.750690][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[   11.810926][    T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.821344][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[   11.890923][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.901678][    T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.910298][    T1] printk: console [ttyS0] disabled
[   11.915315][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[   11.925048][    T1] printk: console [ttyS0] enabled
[   11.925048][    T1] printk: console [ttyS0] enabled
[   11.934908][    T1] printk: bootconsole [earlycon0] disabled
[   11.934908][    T1] printk: bootconsole [earlycon0] disabled
[   11.955613][    T1] loop: module loaded
[   11.960226][    T1] sata_mv f1080000.sata: slots 32 ports 2
[   11.969195][    T1] scsi host0: sata_mv
[   11.973852][    T1] scsi host1: sata_mv
[   11.978071][    T1] ata1: SATA max UDMA/133 irq 33
[   11.982965][    T1] ata2: SATA max UDMA/133 irq 33
[   11.988938][    T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[   11.996187][    T1] nand: Samsung NAND 256MiB 3,3V 8-bit
[   12.001560][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   12.009877][    T1] Scanning device for bad blocks
[   12.071098][    T1] Bad eraseblock 526 at 0x0000041c0000
[   12.076604][    T1] Bad eraseblock 528 at 0x000004200000
[   12.082023][    T1] Bad eraseblock 529 at 0x000004220000
[   12.087413][    T1] Bad eraseblock 530 at 0x000004240000
[   12.137136][    T1] Bad eraseblock 945 at 0x000007620000
[   12.142556][    T1] Bad eraseblock 946 at 0x000007640000
[   12.147947][    T1] Bad eraseblock 947 at 0x000007660000
[   12.256853][    T1] Bad eraseblock 1912 at 0x00000ef00000
[   12.276833][    T1] 2 cmdlinepart partitions found on MTD device orion_nand
[   12.283880][    T1] Creating 2 MTD partitions on "orion_nand":
[   12.289779][    T1] 0x000000000000-0x000000100000 : "uboot"
[   12.297043][    T1] 0x000000100000-0x000010000000 : "root"
[   12.306658][    T1] libphy: Fixed MDIO Bus: probed
[   12.311573][  T112] ata1: SATA link down (SStatus 0 SControl F300)
[   12.318787][    T1] libphy: orion_mdio_bus: probed
[   12.323704][    T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[   12.352400][    T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.360588][    T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[   12.661616][  T114] ata2: SATA link down (SStatus 0 SControl F300)
[   13.080715][    T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c4:3d:c7:4f:6c:92
[   13.090366][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.097653][    T1] ehci-pci: EHCI PCI platform driver
[   13.102920][    T1] ehci-orion: EHCI orion driver
[   13.107880][    T1] orion-ehci f1050000.ehci: EHCI Host Controller
[   13.114161][    T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   13.122779][    T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   13.150114][    T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   13.157183][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[   13.166232][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.174213][    T1] usb usb1: Product: EHCI Host Controller
[   13.179821][    T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[   13.187196][    T1] usb usb1: SerialNumber: f1050000.ehci
[   13.193379][    T1] hub 1-0:1.0: USB hub found
[   13.197909][    T1] hub 1-0:1.0: 1 port detected
[   13.203457][    T1] usbcore: registered new interface driver usb-storage
[   13.210725][    T1] mousedev: PS/2 mouse device common for all mice
[   13.569974][   T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   13.848033][   T15] usb 1-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[   13.856991][   T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.864907][   T15] usb 1-1: Product: Mass Storage Device
[   13.870364][   T15] usb 1-1: Manufacturer: JetFlash
[   13.875267][   T15] usb 1-1: SerialNumber: I3H99W8L
[   13.881121][   T15] usb-storage 1-1:1.0: USB Mass Storage device detected
[   13.888469][   T15] scsi host2: usb-storage 1-1:1.0
[   14.249972][    T1] rtc-mv f1010300.rtc: internal RTC not ticking
[   14.256300][    T1] i2c /dev entries driver
[   14.267673][    T1] rtc-pcf8563 0-0051: registered as rtc0
[   14.275075][    T1] device-mapper: uevent: version 1.0.3
[   14.280810][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   14.290531][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[   14.297792][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[   14.305219][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[   14.312699][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   14.319525][    T1] device-mapper: raid: Loading target version 1.14.0
[   14.328165][    T1] hidraw: raw HID events driver (C) Jiri Kosina
[   14.334743][    T1] drop_monitor: Initializing network drop monitor service
[   14.342153][    T1] NET: Registered protocol family 17
[   14.347608][    T1] Key type dns_resolver registered
[   14.353701][    T1] registered taskstats version 1
[   14.358517][    T1] Loading compiled-in X.509 certificates
[   14.364159][    T1] zswap: loaded using pool lzo/zbud
[   14.479660][    T1] Key type big_key registered
[   14.534591][    T1] Key type encrypted registered
[   14.543260][    T1] rtc-pcf8563 0-0051: setting system clock to 2020-02-27T03:17:13 UTC (1582773433)
[   14.556930][    T1] Freeing unused kernel memory: 1024K
[   14.590623][    T1] Checked W+X mappings: passed, no W+X pages found
[   14.597019][    T1] Run /init as init process
Loading, please wait...
Starting version 241
[   14.972424][   T23] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[   14.996856][    T7] sd 2:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   15.021605][    T7] sd 2:0:0:0: [sda] Write Protect is off
[   15.042991][    T7] sd 2:0:0:0: [sda] No Caching mode page found
[   15.049045][    T7] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.529034][    T7]  sda: sda1
[   15.544720][    T7] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   15.766892][  T164] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: clean, 15090/123392 files, 166605/493056 blocks
done.
[   27.083729][  T188] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   27.134212][  T188] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...done.
[....] Waiting for /dev to be fully populated...[   30.690448][  T368] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   30.729725][  T371] systemd-udevd[371]: Using default interface naming scheme 'v240'.
[   30.862705][  T371] systemd-udevd[371]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   31.104795][  T389] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   31.145710][  T368] lm75 0-0048: hwmon0: sensor 'lm75'
[   31.284795][  T389] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[   31.340259][    C0] random: crng init done
[   31.432850][  T389] orion_wdt: Initial timeout 21 sec
[   31.550302][  T391] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   31.556984][  T370] marvell-cesa f1030000.crypto: CESA device successfully registered
[   31.723500][  T388] systemd-udevd[388]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[   33.171232][  T585] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
[   39.406077][    C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPOFFER of 192.168.1.67 from 192.168.1.1
DHCPREQUEST for 192.168.1.67 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.67 from 192.168.1.1
bound to 192.168.1.67 -- renewal in 12209 seconds.
[   45.916251][ T1138] NET: Registered protocol family 10
[   45.923775][ T1138] Segment Routing with IPv6
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1349 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1376 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 10 debian ttyS0

debian login: root
Password:
Last login: Wed Feb 26 07:57:19 PST 2020 on ttyS0
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
root@debian:~#
root@debian:~# cat /etc/fw_env.config
# MTD device name       Device offset   Env. size       Flash sector size      Number of sectors
/dev/mtd0 0xc0000 0x20000 0x20000
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"
root@debian:~#

Something I am concerned about reading mtd1:0ff00000 00020000 "root" Can I continue?

===
moderator edit: please separate regular text from log.



Edited 1 time(s). Last edit at 02/27/2020 12:14AM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 09:55PM

         __  __                      _ _
        |  \/  | __ _ _ ____   _____| | |
        | |\/| |/ _` | '__\ \ / / _ \ | |
        | |  | | (_| | |   \ V /  __/ | |
        |_|  |_|\__,_|_|    \_/ \___|_|_|
 _   _     ____              _
| | | |   | __ )  ___   ___ | |_
| | | |___|  _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
 \___/    |____/ \___/ \___/ \__|
 ** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Sep  4 2009 - 09:36:11) Marvell version: 3.4.14

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE60

Soc: MV88F6281 Rev 3 (DDR2)
CPU running @ 1000Mhz L2 running @ 333Mhz
SysClock = 333Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size  64MB
DRAM CS[1] base 0x04000000   size  64MB
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB
CRC in Flash: c9d2c91b, Calculated CRC: c9d2c91b

CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 0 is RGMII
Module 1 is TDM

USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0, egiga1 [PRIME]
Hit any key to stop autoboot:  0
(Re)start USB...
USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
.......................................................................

4975179 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
.........................................................................................................................................................................................................................................................................................................................................................................................................................
............................................................................................................................

9713936 bytes read
## Booting image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-25  17:35:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975115 Bytes =  4.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 02100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes =  9.3 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[    0.000000][    T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000][    T0] CPU: VIVT data cache, VIVT instruction cache
[    0.000000][    T0] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writeback
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root) root=LABEL=rootfs rootdelay=10 earlyprintk=serial
[    0.000000][    T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][    T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000][    T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved)
[    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000010][    T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.008527][    T0] Switching to timer-based delay loop, resolution 5ns
[    0.015990][    T0] Console: colour dummy device 80x30
[    0.021211][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.032442][    T0] pid_max: default: 32768 minimum: 301
[    0.038167][    T0] LSM: Security Framework initializing
[    0.043729][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.051079][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.059843][    T0] *** VALIDATE proc ***
[    0.064133][    T0] *** VALIDATE cgroup1 ***
[    0.068405][    T0] *** VALIDATE cgroup2 ***
[    0.072810][    T0] CPU: Testing write buffer coherency: ok
[    0.080387][    T1] Setting up static identity map for 0x100000 - 0x100058
[    0.087571][    T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.093771][    T1] rcu: Hierarchical SRCU implementation.
[    0.103159][    T1] devtmpfs: initialized
[    0.114018][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.124605][    T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.131755][    T1] xor: measuring software checksum speed
[    0.228557][    T1]    arm4regs  :   902.400 MB/sec
[    0.328560][    T1]    8regs     :   542.000 MB/sec
[    0.428552][    T1]    32regs    :   787.600 MB/sec
[    0.433416][    T1] xor: using function: arm4regs (902.400 MB/sec)
[    0.439621][    T1] prandom: seed boundary self test passed
[    0.450242][    T1] prandom: 100 self tests passed
[    0.455024][    T1] pinctrl core: initialized pinctrl subsystem
[    0.462679][    T1] NET: Registered protocol family 16
[    0.468502][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.477077][    T1] audit: initializing netlink subsys (disabled)
[    0.484645][   T14] audit: type=2000 audit(0.470:1): state=initialized audit_enabled=0 res=1
[    0.493220][    T1] cpuidle: using governor ladder
[    0.498088][    T1] cpuidle: using governor menu
[    0.503423][    T1] Feroceon L2: Enabling L2
[    0.507724][    T1] Feroceon L2: Cache support initialised.
[    0.520488][    T1] No ATAGs?
[    2.568534][    C0] random: fast init done
[    7.679399][   T71] alg: No test for lzo-rle (lzo-rle-generic)
[    7.685621][   T73] alg: No test for lzo-rle (lzo-rle-scomp)
[    7.869293][    T1] raid6: int32x8  gen()   106 MB/s
[    8.038947][    T1] raid6: int32x8  xor()    72 MB/s
[    8.208661][    T1] raid6: int32x4  gen()   107 MB/s
[    8.378723][    T1] raid6: int32x4  xor()    69 MB/s
[    8.548851][    T1] raid6: int32x2  gen()   110 MB/s
[    8.718622][    T1] raid6: int32x2  xor()    78 MB/s
[    8.889008][    T1] raid6: int32x1  gen()    83 MB/s
[    9.058679][    T1] raid6: int32x1  xor()    57 MB/s
[    9.063621][    T1] raid6: using algorithm int32x2 gen() 110 MB/s
[    9.069705][    T1] raid6: .... xor() 78 MB/s, rmw enabled
[    9.075164][    T1] raid6: using intx1 recovery algorithm
[    9.080851][    T1] vgaarb: loaded
[    9.084850][    T1] SCSI subsystem initialized
[    9.089916][    T1] usbcore: registered new interface driver usbfs
[    9.096135][    T1] usbcore: registered new interface driver hub
[    9.102272][    T1] usbcore: registered new device driver usb
[    9.108203][    T1] pps_core: LinuxPPS API ver. 1 registered
[    9.113865][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    9.123687][    T1] PTP clock support registered
[    9.129928][    T1] clocksource: Switched to clocksource orion_clocksource
[   10.381981][    T1] VFS: Disk quotas dquot_6.6.0
[   10.386676][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.406182][    T1] NET: Registered protocol family 2
[   10.412250][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[   10.420678][    T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   10.428318][    T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   10.435411][    T1] TCP: Hash tables configured (established 1024 bind 1024)
[   10.442588][    T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.449108][    T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.456347][    T1] NET: Registered protocol family 1
[   10.462176][    T1] RPC: Registered named UNIX socket transport module.
[   10.468762][    T1] RPC: Registered udp transport module.
[   10.474230][    T1] RPC: Registered tcp transport module.
[   10.479605][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.486740][    T1] PCI: CLS 0 bytes, default 32
[   10.491643][    T1] Trying to unpack rootfs image as initramfs...
[   11.503706][    T1] Freeing initrd memory: 9488K
[   11.508564][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.517298][    T1] Initialise system trusted keyrings
[   11.522513][    T1] Key type blacklist registered
[   11.527446][    T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   11.534764][    T1] zbud: loaded
[   11.539295][    T1] NFS: Registering the id_resolver key type
[   11.545154][    T1] Key type id_resolver registered
[   11.550073][    T1] Key type id_legacy registered
[   11.554775][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   11.562172][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.569533][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.577558][    T1] fuse: init (API version 7.31)
[   11.582737][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   11.590100][    T1] orangefs_init: module version upstream loaded
[   11.596170][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   11.625291][    T1] async_tx: api initialized (async)
[   11.630479][    T1] Key type asymmetric registered
[   11.635249][    T1] Asymmetric key parser 'x509' registered
[   11.640949][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   11.650867][    T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   11.661260][    T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   11.669500][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.675750][    T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   11.683351][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   11.690437][    T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   11.697144][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   11.706152][    T1] PCI: bus0: Fast back to back transfers disabled
[   11.712452][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   11.722666][    T1] PCI: bus1: Fast back to back transfers enabled
[   11.728838][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   11.736379][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
[   11.744299][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[   11.750690][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[   11.810926][    T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.821344][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[   11.890923][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.901678][    T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.910298][    T1] printk: console [ttyS0] disabled
[   11.915315][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[   11.925048][    T1] printk: console [ttyS0] enabled
[   11.925048][    T1] printk: console [ttyS0] enabled
[   11.934908][    T1] printk: bootconsole [earlycon0] disabled
[   11.934908][    T1] printk: bootconsole [earlycon0] disabled
[   11.955613][    T1] loop: module loaded
[   11.960226][    T1] sata_mv f1080000.sata: slots 32 ports 2
[   11.969195][    T1] scsi host0: sata_mv
[   11.973852][    T1] scsi host1: sata_mv
[   11.978071][    T1] ata1: SATA max UDMA/133 irq 33
[   11.982965][    T1] ata2: SATA max UDMA/133 irq 33
[   11.988938][    T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[   11.996187][    T1] nand: Samsung NAND 256MiB 3,3V 8-bit
[   12.001560][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   12.009877][    T1] Scanning device for bad blocks
[   12.071098][    T1] Bad eraseblock 526 at 0x0000041c0000
[   12.076604][    T1] Bad eraseblock 528 at 0x000004200000
[   12.082023][    T1] Bad eraseblock 529 at 0x000004220000
[   12.087413][    T1] Bad eraseblock 530 at 0x000004240000
[   12.137136][    T1] Bad eraseblock 945 at 0x000007620000
[   12.142556][    T1] Bad eraseblock 946 at 0x000007640000
[   12.147947][    T1] Bad eraseblock 947 at 0x000007660000
[   12.256853][    T1] Bad eraseblock 1912 at 0x00000ef00000
[   12.276833][    T1] 2 cmdlinepart partitions found on MTD device orion_nand
[   12.283880][    T1] Creating 2 MTD partitions on "orion_nand":
[   12.289779][    T1] 0x000000000000-0x000000100000 : "uboot"
[   12.297043][    T1] 0x000000100000-0x000010000000 : "root"
[   12.306658][    T1] libphy: Fixed MDIO Bus: probed
[   12.311573][  T112] ata1: SATA link down (SStatus 0 SControl F300)
[   12.318787][    T1] libphy: orion_mdio_bus: probed
[   12.323704][    T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[   12.352400][    T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.360588][    T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[   12.661616][  T114] ata2: SATA link down (SStatus 0 SControl F300)
[   13.080715][    T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c4:3d:c7:4f:6c:92
[   13.090366][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.097653][    T1] ehci-pci: EHCI PCI platform driver
[   13.102920][    T1] ehci-orion: EHCI orion driver
[   13.107880][    T1] orion-ehci f1050000.ehci: EHCI Host Controller
[   13.114161][    T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   13.122779][    T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   13.150114][    T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   13.157183][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[   13.166232][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.174213][    T1] usb usb1: Product: EHCI Host Controller
[   13.179821][    T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[   13.187196][    T1] usb usb1: SerialNumber: f1050000.ehci
[   13.193379][    T1] hub 1-0:1.0: USB hub found
[   13.197909][    T1] hub 1-0:1.0: 1 port detected
[   13.203457][    T1] usbcore: registered new interface driver usb-storage
[   13.210725][    T1] mousedev: PS/2 mouse device common for all mice
[   13.569974][   T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   13.848033][   T15] usb 1-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[   13.856991][   T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.864907][   T15] usb 1-1: Product: Mass Storage Device
[   13.870364][   T15] usb 1-1: Manufacturer: JetFlash
[   13.875267][   T15] usb 1-1: SerialNumber: I3H99W8L
[   13.881121][   T15] usb-storage 1-1:1.0: USB Mass Storage device detected
[   13.888469][   T15] scsi host2: usb-storage 1-1:1.0
[   14.249972][    T1] rtc-mv f1010300.rtc: internal RTC not ticking
[   14.256300][    T1] i2c /dev entries driver
[   14.267673][    T1] rtc-pcf8563 0-0051: registered as rtc0
[   14.275075][    T1] device-mapper: uevent: version 1.0.3
[   14.280810][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   14.290531][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[   14.297792][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[   14.305219][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[   14.312699][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   14.319525][    T1] device-mapper: raid: Loading target version 1.14.0
[   14.328165][    T1] hidraw: raw HID events driver (C) Jiri Kosina
[   14.334743][    T1] drop_monitor: Initializing network drop monitor service
[   14.342153][    T1] NET: Registered protocol family 17
[   14.347608][    T1] Key type dns_resolver registered
[   14.353701][    T1] registered taskstats version 1
[   14.358517][    T1] Loading compiled-in X.509 certificates
[   14.364159][    T1] zswap: loaded using pool lzo/zbud
[   14.479660][    T1] Key type big_key registered
[   14.534591][    T1] Key type encrypted registered
[   14.543260][    T1] rtc-pcf8563 0-0051: setting system clock to 2020-02-27T03:17:13 UTC (1582773433)
[   14.556930][    T1] Freeing unused kernel memory: 1024K
[   14.590623][    T1] Checked W+X mappings: passed, no W+X pages found
[   14.597019][    T1] Run /init as init process
Loading, please wait...
Starting version 241
[   14.972424][   T23] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[   14.996856][    T7] sd 2:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   15.021605][    T7] sd 2:0:0:0: [sda] Write Protect is off
[   15.042991][    T7] sd 2:0:0:0: [sda] No Caching mode page found
[   15.049045][    T7] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.529034][    T7]  sda: sda1
[   15.544720][    T7] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   15.766892][  T164] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: clean, 15090/123392 files, 166605/493056 blocks
done.
[   27.083729][  T188] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   27.134212][  T188] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...done.
[....] Waiting for /dev to be fully populated...[   30.690448][  T368] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   30.729725][  T371] systemd-udevd[371]: Using default interface naming scheme 'v240'.
[   30.862705][  T371] systemd-udevd[371]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   31.104795][  T389] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   31.145710][  T368] lm75 0-0048: hwmon0: sensor 'lm75'
[   31.284795][  T389] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[   31.340259][    C0] random: crng init done
[   31.432850][  T389] orion_wdt: Initial timeout 21 sec
[   31.550302][  T391] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   31.556984][  T370] marvell-cesa f1030000.crypto: CESA device successfully registered
[   31.723500][  T388] systemd-udevd[388]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[   33.171232][  T585] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   LPF/eth0/c4:3d:c7:4f:6c:92
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
[   39.406077][    C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
DHCPOFFER of 192.168.1.67 from 192.168.1.1
DHCPREQUEST for 192.168.1.67 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.67 from 192.168.1.1
bound to 192.168.1.67 -- renewal in 12209 seconds.
[   45.916251][ T1138] NET: Registered protocol family 10
[   45.923775][ T1138] Segment Routing with IPv6
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1349 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1376 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 10 debian ttyS0

debian login: root
Password:
Last login: Wed Feb 26 07:57:19 PST 2020 on ttyS0
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
root@debian:~#
root@debian:~# cat /etc/fw_env.config
# MTD device name       Device offset   Env. size       Flash sector size      Number of sectors
/dev/mtd0 0xc0000 0x20000 0x20000
root@debian:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "uboot"
mtd1: 0ff00000 00020000 "root"
root@debian:~# fw_printenv ethaddr
Warning: Bad CRC, using default environment
ethaddr=00:00:11:22:33:44
root@debian:~# nanddump --noecc --omitoob -l 0x80000 -f mtd0 /dev/mtd0
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
root@debian:~# fw_printenv > current_envs.txt
Warning: Bad CRC, using default environment
root@debian:~# dmesg | grep -i 'bad'
[   12.009877] Scanning device for bad blocks
[   12.071098] Bad eraseblock 526 at 0x0000041c0000
[   12.076604] Bad eraseblock 528 at 0x000004200000
[   12.082023] Bad eraseblock 529 at 0x000004220000
[   12.087413] Bad eraseblock 530 at 0x000004240000
[   12.137136] Bad eraseblock 945 at 0x000007620000
[   12.142556] Bad eraseblock 946 at 0x000007640000
[   12.147947] Bad eraseblock 947 at 0x000007660000
[   12.256853] Bad eraseblock 1912 at 0x00000ef00000
root@debian:~#

Are there any bad blocks here?

===
moderator edit: please separate regular text from log.



Edited 1 time(s). Last edit at 02/27/2020 12:16AM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 26, 2020 10:21PM
And here it wasn 't possible to unpack the file. This is in the attached file.I will wait for your hints.



Edited 1 time(s). Last edit at 02/26/2020 10:24PM by cergei.
Attachments:
open | download - экрана (4).png (144.8 KB)
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 12:22AM
cergei,

> root@debian:~# cat /etc/fw_env.config
> # MTD device name Device offset Env. size
> Flash sector size Number of sectors
> /dev/mtd0 0xc0000 0x20000 0x20000

> root@debian:~# cat /proc/mtd
> dev: size erasesize name
> mtd0: 00100000 00020000 "uboot"
> mtd1: 0ff00000 00020000 "root"

Looks OK.

> root@debian:~# fw_printenv ethaddr
> Warning: Bad CRC, using default environment
> ethaddr=00:00:11:22:33:44

This can be done in serial console:

printenv ethaddr


> root@debian:~# nanddump --noecc --omitoob -l
> 0x80000 -f mtd0 /dev/mtd0
> Block size 131072, page size 2048, OOB size 64
> Dumping data starting at 0x00000000 and ending at
> 0x00080000...

OK.

> root@debian:~# fw_printenv > current_envs.txt
> Warning: Bad CRC, using default environment

Ignore this.

> root@debian:~# dmesg | grep -i 'bad'
> [ 12.009877] Scanning device for bad blocks
> [ 12.071098] Bad eraseblock 526 at
> 0x0000041c0000
> [ 12.076604] Bad eraseblock 528 at
> 0x000004200000
> [ 12.082023] Bad eraseblock 529 at
> 0x000004220000
> [ 12.087413] Bad eraseblock 530 at
> 0x000004240000
> [ 12.137136] Bad eraseblock 945 at
> 0x000007620000
> [ 12.142556] Bad eraseblock 946 at
> 0x000007640000
> [ 12.147947] Bad eraseblock 947 at
> 0x000007660000
> [ 12.256853] Bad eraseblock 1912 at
> 0x00000ef00000
> root@debian:~#
> [/code]
>
> Are there any bad blocks here?

The bad blocks are not in the 1st MB of NAND (block 0 to 7), so it is OK to flash u-boot.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 12:23AM
cergei Wrote:
-------------------------------------------------------
> And here it wasn 't possible to unpack the file.
> This is in the attached file.I will wait for your
> hints.

Try cd /boot, and then unpack the tarball there.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 03:45AM
root@debian:~# cd /boot
root@debian:/boot# ls
.
..
System.map-5.2.9-kirkwood-tld-1
config-5.2.9-kirkwood-tld-1
dts
initrd.img-5.2.9-kirkwood-tld-1
linux-headers-5.2.9-kirkwood-tld-1_1.0_armel.deb
uImage
uImage.orig
uInitrd
uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar
vmlinuz-5.2.9-kirkwood-tld-1
zImage-5.2.9-kirkwood-tld-1
zImage.fd
zImage.fdt
root@debian:/boot# tar -xf uboot.2017.07-tld-1.netgear_ms2110.bodhi.tar
root@debian:/boot# flash_erase /dev/mtd0 0 4
Erasing 128 Kibyte @ 60000 -- 100 % complete
root@debian:/boot# nandwrite /dev/mtd0 uboot.2017.07-tld-1.netgear_ms2110.mtd0.kwb
Writing data to block 0 at offset 0x0
Writing data to block 1 at offset 0x20000
Writing data to block 2 at offset 0x40000
Writing data to block 3 at offset 0x60000
root@debian:/boot#
Please note the results in paragraph 6 of the instruction they differ from the reference. Paragraph 7 was all in line with the standard. While I wait for your opinion
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 04:05AM
cergei,

> root@debian:/boot# flash_erase /dev/mtd0 0 4
> Erasing 128 Kibyte @ 60000 -- 100 % complete
> root@debian:/boot# nandwrite /dev/mtd0
> uboot.2017.07-tld-1.netgear_ms2110.mtd0.kwb
> Writing data to block 0 at offset 0x0
> Writing data to block 1 at offset 0x20000
> Writing data to block 2 at offset 0x40000
> Writing data to block 3 at offset 0x60000

Looks good!

As I mentioned that you should run kwboot before installing new u-boot. However, by the look of your flashing session above, I'd say that it is all went well enough. Now go ahead and do Step 8.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 04:59AM
root@debian:~# free
              total        used        free      shared  buff/cache   available
Mem:         115344       14472       56452         280       44420       95440
Swap:             0           0           0
root@debian:~# cd /boot
root@debian:/boot# tar -xf uboot.2016.05-tld-1.environment.bodhi.tar -C /tmp
root@debian:/boot# cd
root@debian:~# cd /tmp
root@debian:/tmp# ls
.                                uboot.2016.05-tld-1.environment.64K.img
..                               uboot.2016.05-tld-1.environment.img
uboot.2016.05-tld-1.environment
root@debian:/tmp# cd
root@debian:~# fw_printenv > current_envs.txt
Warning: Bad CRC, using default environment
root@debian:~# fw_printenv > current_envs.txt
Warning: Bad CRC, using default environment
root@debian:~# /usr/sbin/flash_erase /dev/mtd0 0xc0000 1
Erasing 128 Kibyte @ c0000 -- 100 % complete
root@debian:~# /usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img
uboot.2016.05-tld-1.environment.img: No such file or directory
nandwrite: error!: Data was only partially written due to error
           error 9 (Bad file descriptor)
root@debian:~# fw_setenv arcNumber 2743
Warning: Bad CRC, using default environment
root@debian:~# fw_setenv machid
root@debian:~# cat current_envs.txt
bootcmd=run distro_bootcmd
bootdelay=2
baudrate=115200
stdin=serial,cros-ec-keyb,usbkbd
stdout=serial,vidconsole
stderr=serial,vidconsole
ethaddr=00:00:11:22:33:44
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ipaddr=1.2.3.4
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
sata_boot=if sata dev ${devnum}; then setenv devtype sata; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then setenv scsi_need_init false; scsi scan; fi
scsi_boot=run scsi_init; if scsi dev ${devnum}; then setenv devtype scsi; run scan_dev_for_boot_part; fi
virtio_boot=if virtio dev ${devnum}; then setenv devtype virtio; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=host1 host0
boot_syslinux_conf=extlinux/extlinux.conf
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_host1=setenv devnum 1; run host_boot
bootcmd_host0=setenv devnum 0; run host_boot
distro_bootcmd=setenv scsi_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done
bootm_size=0x10000000
kernel_addr_r=0x1000000
fdt_addr_r=0xc00000
ramdisk_addr_r=0x2000000
scriptaddr=0x1000
pxefile_addr_r=0x2000
root@debian:~#
Quote
c. Save current envs with fw_printenv, or just copy/paste the listing into a text file.
fw_printenv > current_envs.txt

Starting from here, I can 't do anything. In the file
Quote
current_envs.txt
I will not find a value
Quote
fw_setenv mtdparts 'xxxxxxxxx'
I will have to insert this value further. How to pass it?



Edited 1 time(s). Last edit at 02/27/2020 10:31AM by cergei.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 06:02AM
[And the power button on the box will be activated. Thank you again for your help. Without you, I certainly can 't go that way. I focus very poorly on linux.



Edited 1 time(s). Last edit at 02/27/2020 10:38AM by cergei.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 05:42PM
cergei,

Quote

> root@debian:/boot# tar -xf uboot.2016.05-tld-1.environment.bodhi.tar -C /tmp

Don't extract to temp, extract to /boot

cd /boot
tar -xf uboot.2016.05-tld-1.environment.bodhi.tar

Quote

> root@debian:~# fw_printenv > current_envs.txt
> Warning: Bad CRC, using default environment

Ignore this. You are installing the 1st time, so the error is expected.

Quote

> root@debian:~# /usr/sbin/flash_erase /dev/mtd0
> 0xc0000 1
> Erasing 128 Kibyte @ c0000 -- 100 % complete

The above was good. Now cd to the /boot folder and flash it

cd /boot
/usr/sbin/nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img

And continue the rest of Step 8.

As for mtdparts, set it as
fw_setenv mtdparts 'mtdparts=orion_nand:0x100000@0(uboot),0xff00000@0x100000(root)'

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 27, 2020 11:12PM


U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700)
Netgear Stora MS2110

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Unknown command 'host' - try 'help'
Unknown command 'host' - try 'help'
Netgear Stora> help
Unknown command 'е' - try 'help'
Netgear Stora> try 'help'
Unknown command 'try' - try 'help'
Netgear Stora> boot
Unknown command 'host' - try 'help'
Unknown command 'host' - try 'help'
Netgear Stora> reboot
Unknown command 'reboot' - try 'help'
Netgear Stora> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootefi - Boots an EFI payload from memory
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
bootz   - boot Linux zImage image from memory
chpart  - change active partition
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
date    - get/set/reset date & time
dhcp    - boot image via network using DHCP/TFTP protocol
diskboot- boot from IDE device
dns     - lookup the IP of a hostname
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
exit    - exit script
ext2load- load binary file from a Ext2 filesystem
ext2ls  - list files in a directory (default /)
ext4load- load binary file from a Ext4 filesystem
ext4ls  - list files in a directory (default /)
ext4size- determine a file's size
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fatsize - determine a file's size
fdt     - flattened device tree utility commands
fsinfo  - print information about jffs filesystems
fsload  - load binary file from a jffs filesystem image
fsls    - list jffs files in a directory (default /)
fstype  - Look up a filesystem type
go      - start application at address 'addr'
gpio    - query and control gpio pins
gpt     - GUID Partition Table
help    - print command description/usage
ide     - IDE sub-system
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
load    - load binary file from a filesystem
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
ls      - list files in a directory (default /)
md      - memory display
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mtdparts- define flash/nand partitions
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
save    - save file to a filesystem
saveenv - save environment variables to persistent storage
setenv  - set environment variables
setexpr - set environment variable as the result of eval expression
showvar - print local hushshell variables
size    - determine a file's size
sleep   - delay execution for some time
sntp    - synchronize RTC via network
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
ubi     - ubi commands
ubifsload- load file from an UBIFS filesystem
ubifsls - list files in a directory
ubifsmount- mount UBIFS volume
ubifsumount- unmount UBIFS volume
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version
Netgear Stora>  boot from USB device
boot - boot default, i.e., run 'bootcmd'

Usage:
boot
Netgear Stora> bootm
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Netgear Stora> bootelf
## No elf image at address 0x00800000
Netgear Stora> bootefi
bootefi - Boots an EFI payload from memory

Usage:
bootefi <image address> [fdt address]
  - boot EFI payload stored at address <image address>.
    If specified, the device tree located at <fdt address> gets
    exposed as EFI configuration table.

Netgear Stora> bootz
Bad Linux ARM zImage magic!
Netgear Stora>
Hello. Here happened a bad moment for me. Stora doesn 't boot at all. Tried a few spopobs at random the result is negative. I wait for the hint.[quote
Quote
Don't extract to temp, extract to /boot

cd /boot
tar -xf uboot.2016.05-tld-1.environment.bodhi.tar

Executed on another linux computer. It doesn 't load anyway.
[/quote]
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 28, 2020 12:17AM
cergei,

> U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05
> -0700)
> Netgear Stora MS2110
>
> SoC: Kirkwood 88F6281_A1
> DRAM: 128 MiB
> WARNING: Caches not enabled
> NAND: 256 MiB
> In: serial
> Out: serial
> Err: serial
> Net: egiga0
> PHY reset timed out
> 88E1116 Initialized on egiga0
> Hit any key to stop autoboot: 0

At this point, you would interrupt it to do some testing. Such as get a listing of envs to see if the flashing was done correctly:

printenv
And then go ahead and boot

boot

And let it go until it boots to Debian prompt. Now you can log in through this serial console, or use SSH to connect.

After you can successully log in through serial or SSH. Reboot and let it boot automatically without interrupting u-boot. That would complete the installation.

And you can remove serial console if you like. Or just leave it connected in case you have to troubleshoot something.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 28, 2020 02:18AM
Nothing occurs. Only the fan is turned on when power is supplied. No LED is turned on usb rootfs is also turned on. SSH fails, is not sure that the old ip address from Stora 192.168.1.67 is correct, in any case there is no connection not in the serial console not over SSH. Maybe something with usb rootfs. How to check it?



Edited 3 time(s). Last edit at 02/28/2020 02:53AM by cergei.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 28, 2020 05:39PM
cergei,

Look like you did not complete Step 8 successfully. You should not reboot when there is error like that. When during installation, if you see error, post the questions and wait for answer.

As right now, I think your envs are all messed up. Let's check and fix them.

With serial console connected, power up, and interrupt serial console at countdown, and

printenv

And post the entire log here.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 28, 2020 10:36PM
Quote
With serial console connected, power up, and interrupt serial console at countdown, and
That 's more detailed, I don 't know how to understand that? Connecting the serial console is clear. Nothing is empty on the screen at this time. Well I count up to 10 starting one two three, etc still the screen does not come to life, and I interrupt loading by pressing any key, with an empty screen, ine can enter < printenv > since the console is dead.Or do I not understand correctly?
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 28, 2020 11:20PM
cergei,

> Connecting the serial console
> is clear. Nothing is empty on the screen at this
> time. Well I count up to 10 starting one two
> three, etc still the screen does not come to life,
> and I interrupt loading by pressing any key, with
> an empty screen

Like you did above to see "help". When you type any key to interrupt the countdown,

Hit any key to stop autoboot:  0

you will see the u-boot prompt:

Netgear Stora>


At this prompt, enter
printenv

And you will see the envs listted.

Then capture (copy and paste) the whole thing here in code tags.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 02/28/2020 11:44PM by bodhi.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 29, 2020 05:04AM


U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700)
Netgear Stora MS2110

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Unknown command 'host' - try 'help'
Unknown command 'host' - try 'help'
Netgear Stora>  printenv
arcNumber=2743
baudrate=115200
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_prefixes=/ /boot/
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=host1 host0
bootcmd=run distro_bootcmd
bootcmd_host0=setenv devnum 0; run host_boot
bootcmd_host1=setenv devnum 1; run host_boot
bootdelay=2
bootm_size=0x10000000
devnum=0
distro_bootcmd=setenv scsi_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ethact=egiga0
ethaddr=00:00:11:22:33:44
fdt_addr_r=0xc00000
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
ipaddr=1.2.3.4
kernel_addr_r=0x1000000
pxefile_addr_r=0x2000
ramdisk_addr_r=0x2000000
sata_boot=if sata dev ${devnum}; then setenv devtype sata; run scan_dev_for_boot_part; fi
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x1000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then setenv devtype scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then setenv scsi_need_init false; scsi scan; fi
stderr=serial
stdin=serial
stdout=serial
virtio_boot=if virtio dev ${devnum}; then setenv devtype virtio; run scan_dev_for_boot_part; fi

Environment size: 2373/131068 bytes
Netgear Stora>
At last that turned out. Let 's start as you say to me in the last post, we won 't be in a hurry. And the reason for my excitement was because I had something happen to the usb-ttl converter. In general, no information was displayed, no connection to the serial console took place. Changed usb-ttl for a new one and everything got in its place.While waiting for your decision, what to do next?
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 29, 2020 05:37AM
cergei,

Your listing of envs at u-boot prompt confirmed my observation! The envs are now back to stock settings. That's why you cannot boot into Debian.

Yes, take it slow, we are in no hurry :) It is just a glitch in the process. When you make a small mistake, you backtrack and fix it.

I will come back tomorrow to show you how to load the correct u-boot envs to boot into Debian.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 29, 2020 05:45PM
cergei,

Power up the Stora box and interrupt serial console at countdown and run this command

env default -a

and then
printenv

and try booting
boot

Please post the entire serial console log here.

After you can log into Debian either through serial console or SSH, I will post the next step.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 29, 2020 10:29PM


U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700)
Netgear Stora MS2110

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Netgear Stora> env default -a
## Resetting to default environment
Netgear Stora> printenv
arcNumber=2743
baudrate=115200
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm$load_uimage_addr; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
console=console=ttyS0,115200
device=0:1
devices=usb ide
disks=0 1 2 3
dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000
ethact=egiga0
ethaddr=52:3b:20:9c:11:51
if_netconsole=ping $serverip
ipaddr=192.168.0.231
led_error=orange blinking
led_exit=green off
led_init=green blinking
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file
load_dtb_addr=0x1c00000
load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x1100000
load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage
load_uimage_addr=0x800000
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1m(uboot),4m@1m(kernel),251m@5m(rootfs) rw
partition=nand0,2
preboot_nc=run if_netconsole start_netconsole
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start";  setenv scan_ide "ide reset";  setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.0.220
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_addr=0x810000
uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize
uenv_init_devices=setenv init_usb "usb start";  setenv init_ide "ide reset";  setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices;  do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read;  fi; else if $devtype part $disknum; then run uenv_read; fi;  fi
usb_ready_retry=15

Environment size: 2905/131068 bytes
Netgear Stora> boot
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found

Reset IDE: ide_preinit failed

Partition Map for USB device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     2048            3944448         dc08cbef-01     83

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 1084 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4975179 bytes read in 1058 ms (4.5 MiB/s)
loading uInitrd ...
9713936 bytes read in 1049 ms (8.8 MiB/s)
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000 ...
** File not found /boot/dts/kirkwood-netgear_stora_ms2000 **
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-25  17:35:15 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4975115 Bytes = 4.7 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes = 9.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
   Loading Ramdisk to 036bc000, end 03fff8d0 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[    0.000000][    T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000][    T0] CPU: VIVT data cache, VIVT instruction cache
[    0.000000][    T0] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000][    T0] Memory policy: Data cache writeback
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1m(uboot),4m@1m(kernel),251m@5m(rootfs) rw
[    0.000000][    T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][    T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000][    T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved)
[    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000012][    T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000060][    T0] Switching to timer-based delay loop, resolution 5ns
[    0.000969][    T0] Console: colour dummy device 80x30
[    0.001033][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.001066][    T0] pid_max: default: 32768 minimum: 301
[    0.001510][    T0] LSM: Security Framework initializing
[    0.001740][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001773][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002812][    T0] *** VALIDATE proc ***
[    0.003130][    T0] *** VALIDATE cgroup1 ***
[    0.003161][    T0] *** VALIDATE cgroup2 ***
[    0.003283][    T0] CPU: Testing write buffer coherency: ok
[    0.005370][    T1] Setting up static identity map for 0x100000 - 0x100058
[    0.005739][    T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.006098][    T1] rcu: Hierarchical SRCU implementation.
[    0.010164][    T1] devtmpfs: initialized
[    0.016918][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.016958][    T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.017258][    T1] xor: measuring software checksum speed
[    0.110147][    T1]    arm4regs  :   902.400 MB/sec
[    0.210096][    T1]    8regs     :   542.000 MB/sec
[    0.310091][    T1]    32regs    :   788.000 MB/sec
[    0.310113][    T1] xor: using function: arm4regs (902.400 MB/sec)
[    0.310137][    T1] prandom: seed boundary self test passed
[    0.315176][    T1] prandom: 100 self tests passed
[    0.315190][    T1] pinctrl core: initialized pinctrl subsystem
[    0.316968][    T1] NET: Registered protocol family 16
[    0.317671][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.318671][    T1] audit: initializing netlink subsys (disabled)
[    0.320223][   T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1
[    0.320370][    T1] cpuidle: using governor ladder
[    0.320464][    T1] cpuidle: using governor menu
[    0.321154][    T1] Feroceon L2: Enabling L2
[    0.321216][    T1] Feroceon L2: Cache support initialised.
[    0.328360][    T1] No ATAGs?
[    2.560068][    C0] random: fast init done
[    7.479929][   T71] alg: No test for lzo-rle (lzo-rle-generic)
[    7.480578][   T73] alg: No test for lzo-rle (lzo-rle-scomp)
[    7.660920][    T1] raid6: int32x8  gen()   106 MB/s
[    7.830456][    T1] raid6: int32x8  xor()    72 MB/s
[    8.000097][    T1] raid6: int32x4  gen()   107 MB/s
[    8.170243][    T1] raid6: int32x4  xor()    69 MB/s
[    8.340092][    T1] raid6: int32x2  gen()   110 MB/s
[    8.510150][    T1] raid6: int32x2  xor()    78 MB/s
[    8.680543][    T1] raid6: int32x1  gen()    83 MB/s
[    8.850203][    T1] raid6: int32x1  xor()    57 MB/s
[    8.850217][    T1] raid6: using algorithm int32x2 gen() 110 MB/s
[    8.850227][    T1] raid6: .... xor() 78 MB/s, rmw enabled
[    8.850237][    T1] raid6: using intx1 recovery algorithm
[    8.850549][    T1] vgaarb: loaded
[    8.851177][    T1] SCSI subsystem initialized
[    8.851789][    T1] usbcore: registered new interface driver usbfs
[    8.851864][    T1] usbcore: registered new interface driver hub
[    8.851980][    T1] usbcore: registered new device driver usb
[    8.852198][    T1] pps_core: LinuxPPS API ver. 1 registered
[    8.852213][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    8.852246][    T1] PTP clock support registered
[    8.853871][    T1] clocksource: Switched to clocksource orion_clocksource
[   10.098969][    T1] VFS: Disk quotas dquot_6.6.0
[   10.099081][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.110953][    T1] NET: Registered protocol family 2
[   10.111951][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[   10.111993][    T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   10.112021][    T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   10.112046][    T1] TCP: Hash tables configured (established 1024 bind 1024)
[   10.112167][    T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.112199][    T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.112478][    T1] NET: Registered protocol family 1
[   10.113261][    T1] RPC: Registered named UNIX socket transport module.
[   10.113279][    T1] RPC: Registered udp transport module.
[   10.113289][    T1] RPC: Registered tcp transport module.
[   10.113299][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.113317][    T1] PCI: CLS 0 bytes, default 32
[   10.113612][    T1] Trying to unpack rootfs image as initramfs...
[   11.131920][    T1] Freeing initrd memory: 9488K
[   11.132169][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.133636][    T1] Initialise system trusted keyrings
[   11.133707][    T1] Key type blacklist registered
[   11.134078][    T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   11.134210][    T1] zbud: loaded
[   11.135577][    T1] NFS: Registering the id_resolver key type
[   11.135617][    T1] Key type id_resolver registered
[   11.135629][    T1] Key type id_legacy registered
[   11.135653][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   11.135673][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.136026][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.136312][    T1] fuse: init (API version 7.31)
[   11.136784][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   11.137008][    T1] orangefs_init: module version upstream loaded
[   11.137024][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   11.157995][    T1] async_tx: api initialized (async)
[   11.158025][    T1] Key type asymmetric registered
[   11.158037][    T1] Asymmetric key parser 'x509' registered
[   11.158126][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   11.159879][    T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   11.162239][    T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   11.162268][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.162287][    T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   11.162304][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   11.162443][    T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   11.162493][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   11.164289][    T1] PCI: bus0: Fast back to back transfers disabled
[   11.164325][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   11.165873][    T1] PCI: bus1: Fast back to back transfers enabled
[   11.165906][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   11.166152][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
[   11.166174][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[   11.166923][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[   11.224864][    T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.227271][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[   11.284869][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.287630][    T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.289198][    T1] printk: console [ttyS0] disabled
[   11.289286][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[   12.131547][    T1] printk: console [ttyS0] enabled
[   12.145737][    T1] loop: module loaded
[   12.150298][    T1] sata_mv f1080000.sata: slots 32 ports 2
[   12.159321][    T1] scsi host0: sata_mv
[   12.163960][    T1] scsi host1: sata_mv
[   12.168191][    T1] ata1: SATA max UDMA/133 irq 33
[   12.173012][    T1] ata2: SATA max UDMA/133 irq 33
[   12.179110][    T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[   12.186307][    T1] nand: Samsung NAND 256MiB 3,3V 8-bit
[   12.191656][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   12.200006][    T1] Scanning device for bad blocks
[   12.261215][    T1] Bad eraseblock 526 at 0x0000041c0000
[   12.266744][    T1] Bad eraseblock 528 at 0x000004200000
[   12.272140][    T1] Bad eraseblock 529 at 0x000004220000
[   12.277553][    T1] Bad eraseblock 530 at 0x000004240000
[   12.327275][    T1] Bad eraseblock 945 at 0x000007620000
[   12.332667][    T1] Bad eraseblock 946 at 0x000007640000
[   12.338088][    T1] Bad eraseblock 947 at 0x000007660000
[   12.446914][    T1] Bad eraseblock 1912 at 0x00000ef00000
[   12.466917][    T1] 3 cmdlinepart partitions found on MTD device orion_nand
[   12.473962][    T1] Creating 3 MTD partitions on "orion_nand":
[   12.479861][    T1] 0x000000000000-0x000000100000 : "uboot"
[   12.487115][    T1] 0x000000100000-0x000000500000 : "kernel"
[   12.494417][    T1] 0x000000500000-0x000010000000 : "rootfs"
[   12.504204][    T1] libphy: Fixed MDIO Bus: probed
[   12.509086][  T112] ata1: SATA link down (SStatus 0 SControl F300)
[   12.516306][    T1] libphy: orion_mdio_bus: probed
[   12.521148][    T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[   12.550065][    T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.558315][    T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[   12.875555][  T114] ata2: SATA link down (SStatus 0 SControl F300)
[   13.284638][    T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[   13.294298][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.301592][    T1] ehci-pci: EHCI PCI platform driver
[   13.306859][    T1] ehci-orion: EHCI orion driver
[   13.311823][    T1] orion-ehci f1050000.ehci: EHCI Host Controller
[   13.318129][    T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   13.326756][    T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   13.353920][    T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   13.360988][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[   13.370033][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.378019][    T1] usb usb1: Product: EHCI Host Controller
[   13.383619][    T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[   13.390985][    T1] usb usb1: SerialNumber: f1050000.ehci
[   13.397174][    T1] hub 1-0:1.0: USB hub found
[   13.401698][    T1] hub 1-0:1.0: 1 port detected
[   13.407261][    T1] usbcore: registered new interface driver usb-storage
[   13.414498][    T1] mousedev: PS/2 mouse device common for all mice
[   13.773916][   T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   14.052014][   T15] usb 1-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[   14.060971][   T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   14.068887][   T15] usb 1-1: Product: Mass Storage Device
[   14.074337][   T15] usb 1-1: Manufacturer: JetFlash
[   14.079239][   T15] usb 1-1: SerialNumber: I3H99W8L
[   14.085126][   T15] usb-storage 1-1:1.0: USB Mass Storage device detected
[   14.092510][   T15] scsi host2: usb-storage 1-1:1.0
[   14.483913][    T1] rtc-mv f1010300.rtc: internal RTC not ticking
[   14.490242][    T1] i2c /dev entries driver
[   14.501630][    T1] rtc-pcf8563 0-0051: registered as rtc0
[   14.509032][    T1] device-mapper: uevent: version 1.0.3
[   14.514756][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   14.524482][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[   14.531744][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[   14.539172][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[   14.546655][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   14.553485][    T1] device-mapper: raid: Loading target version 1.14.0
[   14.562180][    T1] hidraw: raw HID events driver (C) Jiri Kosina
[   14.568774][    T1] drop_monitor: Initializing network drop monitor service
[   14.576194][    T1] NET: Registered protocol family 17
[   14.581654][    T1] Key type dns_resolver registered
[   14.587714][    T1] registered taskstats version 1
[   14.592530][    T1] Loading compiled-in X.509 certificates
[   14.598169][    T1] zswap: loaded using pool lzo/zbud
[   14.714870][    T1] Key type big_key registered
[   14.770288][    T1] Key type encrypted registered
[   14.778971][    T1] rtc-pcf8563 0-0051: setting system clock to 2020-03-01T04:20:51 UTC (1583036451)
[   14.792678][    T1] Freeing unused kernel memory: 1024K
[   14.824621][    T1] Checked W+X mappings: passed, no W+X pages found
[   14.831015][    T1] Run /init as init process
Loading, please wait...
Starting version 241
[   15.126406][   T23] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[   15.161334][  T116] sd 2:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   15.184587][  T116] sd 2:0:0:0: [sda] Write Protect is off
[   15.199419][  T116] sd 2:0:0:0: [sda] No Caching mode page found
[   15.218816][  T116] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.630144][  T116]  sda: sda1
[   15.638328][  T116] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   16.660328][  T167] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: clean, 15098/123392 files, 166977/493056 blocks
done.
[   27.250711][  T192] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   27.302966][  T192] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...done.
[....] Waiting for /dev to be fully populated...[   30.907067][  T375] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[   30.986966][  T374] systemd-udevd[374]: Using default interface naming scheme 'v240'.
[   31.130871][  T374] systemd-udevd[374]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   31.244248][  T371] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   31.264257][  T393] lm75 0-0048: hwmon0: sensor 'lm75'
[   31.354117][    C0] random: crng init done
[   31.433989][  T371] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[   31.567921][  T371] orion_wdt: Initial timeout 21 sec
[   31.707094][  T372] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   31.798513][  T392] marvell-cesa f1030000.crypto: CESA device successfully registered
[   32.021515][  T371] systemd-udevd[371]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[   33.736906][  T590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/52:3b:20:9c:11:51
Sending on   LPF/eth0/52:3b:20:9c:11:51
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
[   43.751020][    C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPOFFER of 192.168.1.42 from 192.168.1.1
DHCPREQUEST for 192.168.1.42 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.42 from 192.168.1.1
bound to 192.168.1.42 -- renewal in 12074 seconds.
[   47.814364][ T1143] NET: Registered protocol family 10
[   47.822858][ T1143] Segment Routing with IPv6
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1354 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1381 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 10 debian ttyS0

debian login: root
Password:

Login incorrect
debian login: root
Password:
Last login: Thu Feb 27 06:45:21 PST 2020 on ttyS0
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
The instruction is carried out
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
February 29, 2020 11:31PM
Cool! getting very close.

There was a typo in my u-boot default env:

dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000

But you are still able to boot OK. So 2 things must be corrected:

1. The USB rootfs

Mount it on another Linux box, and reverse Step 4 in the rootfs creation instruction. Assuming it is mounted at /media/sdb1

cd /media/sdb1/boot
cp -a uImage uImage.Stora
cp -a uImage.orig uImage
sync

2. Umount and bring it back to the Stora. Power up, interrupt serial console and execute these commands:

env default -a
setenv dtb_file '/boot/dts/kirkwood-netgear_stora_ms2000.dtb'
boot

This time it should boot all the way into Debian again. And I will post the next step after that.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
March 01, 2020 05:01AM


U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700)
Netgear Stora MS2110

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
PHY reset timed out
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
Netgear Stora> env default -a
## Resetting to default environment
Netgear Stora> setenv dtb_file '/boot/dts/kirkwood-netgear_stora_ms2000.dtb'
Netgear Stora> boot
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices...
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found

Reset IDE: ide_preinit failed

Partition Map for USB device 0  --   Partition Type: DOS

Part    Start Sector    Num Sectors     UUID            Type
  1     2048            3944448         dc08cbef-01     83

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0

## Unknown partition table type 0
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **

no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 1054 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4963680 bytes read in 1102 ms (4.3 MiB/s)
loading uInitrd ...
9713936 bytes read in 1050 ms (8.8 MiB/s)
loading DTB /boot/dts/kirkwood-netgear_stora_ms2000.dtb ...
11499 bytes read in 2660 ms (3.9 KiB/s)
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-5.2.9-kirkwood-tld-1
   Created:      2020-02-20  12:36:45 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4963616 Bytes = 4.7 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-5.2.9-kirkwood-tld-1
   Created:      2019-08-25   2:22:50 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9713872 Bytes = 9.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
   Booting using the fdt blob at 0x1c00000
   Loading Kernel Image ... OK
   Loading Ramdisk to 036bc000, end 03fff8d0 ... OK
   Loading Device Tree to 036b6000, end 036bbcea ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019
[    0.000000][    T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[    0.000000][    T0] CPU: VIVT data cache, VIVT instruction cache
[    0.000000][    T0] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora
[    0.000000][    T0] Memory policy: Data cache writeback
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 32512
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:1m(uboot),4m@1m(kernel),251m@5m(rootfs) rw
[    0.000000][    T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000][    T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000][    T0] Memory: 104832K/131072K available (9216K kernel code, 868K rwdata, 3400K rodata, 1024K init, 301K bss, 26240K reserved, 0K cma-reserved)
[    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[    0.000011][    T0] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[    0.000058][    T0] Switching to timer-based delay loop, resolution 5ns
[    0.000963][    T0] Console: colour dummy device 80x30
[    0.001027][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[    0.001059][    T0] pid_max: default: 32768 minimum: 301
[    0.001505][    T0] LSM: Security Framework initializing
[    0.001730][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001764][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002800][    T0] *** VALIDATE proc ***
[    0.003118][    T0] *** VALIDATE cgroup1 ***
[    0.003150][    T0] *** VALIDATE cgroup2 ***
[    0.003270][    T0] CPU: Testing write buffer coherency: ok
[    0.005349][    T1] Setting up static identity map for 0x100000 - 0x100058
[    0.005719][    T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3
[    0.006078][    T1] rcu: Hierarchical SRCU implementation.
[    0.010138][    T1] devtmpfs: initialized
[    0.016892][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.016932][    T1] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.017232][    T1] xor: measuring software checksum speed
[    0.110139][    T1]    arm4regs  :   902.400 MB/sec
[    0.210096][    T1]    8regs     :   542.000 MB/sec
[    0.310085][    T1]    32regs    :   787.600 MB/sec
[    0.310108][    T1] xor: using function: arm4regs (902.400 MB/sec)
[    0.310134][    T1] prandom: seed boundary self test passed
[    0.315171][    T1] prandom: 100 self tests passed
[    0.315185][    T1] pinctrl core: initialized pinctrl subsystem
[    0.316974][    T1] NET: Registered protocol family 16
[    0.317676][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.318684][    T1] audit: initializing netlink subsys (disabled)
[    0.320237][   T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1
[    0.320382][    T1] cpuidle: using governor ladder
[    0.320480][    T1] cpuidle: using governor menu
[    0.321167][    T1] Feroceon L2: Enabling L2
[    0.321229][    T1] Feroceon L2: Cache support initialised.
[    0.328384][    T1] No ATAGs?
[    2.560068][    C0] random: fast init done
[    7.479957][   T71] alg: No test for lzo-rle (lzo-rle-generic)
[    7.480605][   T73] alg: No test for lzo-rle (lzo-rle-scomp)
[    7.660911][    T1] raid6: int32x8  gen()   106 MB/s
[    7.830456][    T1] raid6: int32x8  xor()    72 MB/s
[    8.000357][    T1] raid6: int32x4  gen()   107 MB/s
[    8.170242][    T1] raid6: int32x4  xor()    69 MB/s
[    8.340270][    T1] raid6: int32x2  gen()   110 MB/s
[    8.510152][    T1] raid6: int32x2  xor()    78 MB/s
[    8.680541][    T1] raid6: int32x1  gen()    83 MB/s
[    8.850200][    T1] raid6: int32x1  xor()    57 MB/s
[    8.850214][    T1] raid6: using algorithm int32x2 gen() 110 MB/s
[    8.850224][    T1] raid6: .... xor() 78 MB/s, rmw enabled
[    8.850234][    T1] raid6: using intx1 recovery algorithm
[    8.850545][    T1] vgaarb: loaded
[    8.851172][    T1] SCSI subsystem initialized
[    8.851787][    T1] usbcore: registered new interface driver usbfs
[    8.851864][    T1] usbcore: registered new interface driver hub
[    8.851980][    T1] usbcore: registered new device driver usb
[    8.852201][    T1] pps_core: LinuxPPS API ver. 1 registered
[    8.852216][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    8.852250][    T1] PTP clock support registered
[    8.853882][    T1] clocksource: Switched to clocksource orion_clocksource
[   10.099020][    T1] VFS: Disk quotas dquot_6.6.0
[   10.099132][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   10.110998][    T1] NET: Registered protocol family 2
[   10.111994][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[   10.112036][    T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[   10.112064][    T1] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[   10.112090][    T1] TCP: Hash tables configured (established 1024 bind 1024)
[   10.112211][    T1] UDP hash table entries: 256 (order: 0, 4096 bytes)
[   10.112244][    T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[   10.112521][    T1] NET: Registered protocol family 1
[   10.113307][    T1] RPC: Registered named UNIX socket transport module.
[   10.113324][    T1] RPC: Registered udp transport module.
[   10.113335][    T1] RPC: Registered tcp transport module.
[   10.113345][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   10.113362][    T1] PCI: CLS 0 bytes, default 32
[   10.113658][    T1] Trying to unpack rootfs image as initramfs...
[   11.131939][    T1] Freeing initrd memory: 9488K
[   11.132187][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[   11.133648][    T1] Initialise system trusted keyrings
[   11.133730][    T1] Key type blacklist registered
[   11.134106][    T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[   11.134237][    T1] zbud: loaded
[   11.135596][    T1] NFS: Registering the id_resolver key type
[   11.135632][    T1] Key type id_resolver registered
[   11.135645][    T1] Key type id_legacy registered
[   11.135669][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   11.135689][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.136044][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[   11.136332][    T1] fuse: init (API version 7.31)
[   11.136806][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[   11.137033][    T1] orangefs_init: module version upstream loaded
[   11.137048][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled
[   11.157987][    T1] async_tx: api initialized (async)
[   11.158017][    T1] Key type asymmetric registered
[   11.158030][    T1] Asymmetric key parser 'x509' registered
[   11.158118][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   11.159866][    T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[   11.162228][    T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[   11.162257][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
[   11.162277][    T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[   11.162293][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
[   11.162432][    T1] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400
[   11.162481][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
[   11.164258][    T1] PCI: bus0: Fast back to back transfers disabled
[   11.164294][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   11.165821][    T1] PCI: bus1: Fast back to back transfers enabled
[   11.165854][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   11.166099][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
[   11.166122][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
[   11.166876][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[   11.224875][    T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.227284][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[   11.284875][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
[   11.287603][    T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   11.289171][    T1] printk: console [ttyS0] disabled
[   11.289260][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[   12.131515][    T1] printk: console [ttyS0] enabled
[   12.145718][    T1] loop: module loaded
[   12.150269][    T1] sata_mv f1080000.sata: slots 32 ports 2
[   12.159301][    T1] scsi host0: sata_mv
[   12.163939][    T1] scsi host1: sata_mv
[   12.168168][    T1] ata1: SATA max UDMA/133 irq 33
[   12.172987][    T1] ata2: SATA max UDMA/133 irq 33
[   12.179089][    T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
[   12.186284][    T1] nand: Samsung NAND 256MiB 3,3V 8-bit
[   12.191632][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[   12.199981][    T1] Scanning device for bad blocks
[   12.261234][    T1] Bad eraseblock 526 at 0x0000041c0000
[   12.266764][    T1] Bad eraseblock 528 at 0x000004200000
[   12.272160][    T1] Bad eraseblock 529 at 0x000004220000
[   12.277574][    T1] Bad eraseblock 530 at 0x000004240000
[   12.327294][    T1] Bad eraseblock 945 at 0x000007620000
[   12.332685][    T1] Bad eraseblock 946 at 0x000007640000
[   12.338099][    T1] Bad eraseblock 947 at 0x000007660000
[   12.446928][    T1] Bad eraseblock 1912 at 0x00000ef00000
[   12.466938][    T1] 3 cmdlinepart partitions found on MTD device orion_nand
[   12.473988][    T1] Creating 3 MTD partitions on "orion_nand":
[   12.479889][    T1] 0x000000000000-0x000000100000 : "uboot"
[   12.487153][    T1] 0x000000100000-0x000000500000 : "kernel"
[   12.494450][    T1] 0x000000500000-0x000010000000 : "rootfs"
[   12.504227][    T1] libphy: Fixed MDIO Bus: probed
[   12.509105][  T112] ata1: SATA link down (SStatus 0 SControl F300)
[   12.516326][    T1] libphy: orion_mdio_bus: probed
[   12.521176][    T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove
[   12.550056][    T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[   12.558307][    T1] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set
[   12.875568][  T114] ata2: SATA link down (SStatus 0 SControl F300)
[   13.284676][    T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51
[   13.294335][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.301628][    T1] ehci-pci: EHCI PCI platform driver
[   13.306897][    T1] ehci-orion: EHCI orion driver
[   13.311859][    T1] orion-ehci f1050000.ehci: EHCI Host Controller
[   13.318156][    T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[   13.326785][    T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[   13.353931][    T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[   13.360998][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[   13.370046][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.378030][    T1] usb usb1: Product: EHCI Host Controller
[   13.383630][    T1] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd
[   13.391005][    T1] usb usb1: SerialNumber: f1050000.ehci
[   13.397188][    T1] hub 1-0:1.0: USB hub found
[   13.401708][    T1] hub 1-0:1.0: 1 port detected
[   13.407267][    T1] usbcore: registered new interface driver usb-storage
[   13.414514][    T1] mousedev: PS/2 mouse device common for all mice
[   13.773926][   T15] usb 1-1: new high-speed USB device number 2 using orion-ehci
[   14.052040][   T15] usb 1-1: New USB device found, idVendor=8564, idProduct=1000, bcdDevice= 1.00
[   14.061001][   T15] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   14.068914][   T15] usb 1-1: Product: Mass Storage Device
[   14.074365][   T15] usb 1-1: Manufacturer: JetFlash
[   14.079267][   T15] usb 1-1: SerialNumber: I3H99W8L
[   14.085150][   T15] usb-storage 1-1:1.0: USB Mass Storage device detected
[   14.092531][   T15] scsi host2: usb-storage 1-1:1.0
[   14.483922][    T1] rtc-mv f1010300.rtc: internal RTC not ticking
[   14.490253][    T1] i2c /dev entries driver
[   14.501648][    T1] rtc-pcf8563 0-0051: registered as rtc0
[   14.509051][    T1] device-mapper: uevent: version 1.0.3
[   14.514778][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   14.524502][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[   14.531764][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[   14.539193][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[   14.546679][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[   14.553505][    T1] device-mapper: raid: Loading target version 1.14.0
[   14.562206][    T1] hidraw: raw HID events driver (C) Jiri Kosina
[   14.568801][    T1] drop_monitor: Initializing network drop monitor service
[   14.576223][    T1] NET: Registered protocol family 17
[   14.581680][    T1] Key type dns_resolver registered
[   14.587741][    T1] registered taskstats version 1
[   14.592558][    T1] Loading compiled-in X.509 certificates
[   14.598198][    T1] zswap: loaded using pool lzo/zbud
[   14.714994][    T1] Key type big_key registered
[   14.770254][    T1] Key type encrypted registered
[   14.778924][    T1] rtc-pcf8563 0-0051: setting system clock to 2020-03-01T10:55:21 UTC (1583060121)
[   14.792638][    T1] Freeing unused kernel memory: 1024K
[   14.824634][    T1] Checked W+X mappings: passed, no W+X pages found
[   14.831026][    T1] Run /init as init process
Loading, please wait...
Starting version 241
[   15.126435][   T23] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 2GB    8.07 PQ: 0 ANSI: 2
[   15.161359][  T116] sd 2:0:0:0: [sda] 3948544 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   15.184652][  T116] sd 2:0:0:0: [sda] Write Protect is off
[   15.198924][  T116] sd 2:0:0:0: [sda] No Caching mode page found
[   15.219813][  T116] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.606659][  T116]  sda: sda1
[   15.615107][  T116] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   16.651128][  T173] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: clean, 15099/123392 files, 168194/493056 blocks
done.
[   27.230364][  T192] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   27.282492][  T192] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[info] Using makefile-style concurrent boot in runlevel S.
[ ok ] Starting hotplug events dispatcher: systemd-udevd.
[ ok ] Synthesizing the initial hotplug events (subsystems)...done.
[ ok ] Synthesizing the initial hotplug events (devices)...[   30.791583][  T390] input: gpio-keys as /devices/platform/gpio-keys/input/input0
done.
[....] Waiting for /dev to be fully populated...[   30.897386][  T393] systemd-udevd[393]: Using default interface naming scheme 'v240'.
[   31.009566][  T393] systemd-udevd[393]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[   31.224225][  T375] lm75 0-0048: hwmon0: sensor 'lm75'
[   31.280874][  T408] watchdog: f1020300.watchdog-timer: driver supplied timeout (4294967295) out of range
[   31.330331][    C0] random: crng init done
[   31.430455][  T408] watchdog: f1020300.watchdog-timer: falling back to default timeout (21)
[   31.574429][  T408] orion_wdt: Initial timeout 21 sec
[   31.688534][  T374] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   31.783008][  T409] marvell-cesa f1030000.crypto: CESA device successfully registered
[   32.001054][  T375] systemd-udevd[375]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
done.
[ ok ] Setting hostname to 'debian'...done.
[ ok ] Activating swap:.
[   33.505978][  T590] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[info] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable..
[ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
[ ok .
[ ok ] Will now mount local filesystems:.
[ ok ] Will now activate swapfile swap:done.
[ ok ] Checking minimum space in /tmp...done.
[ ok ] Cleaning up temporary files....
[ ok ] Starting Setting kernel variables: sysctl.
[ ok ] Initializing random number generator...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/52:3b:20:9c:11:51
Sending on   LPF/eth0/52:3b:20:9c:11:51
Sending on   Socket/fallback
DHCPREQUEST for 192.168.1.42 on eth0 to 255.255.255.255 port 67
[   39.810363][    C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
DHCPREQUEST for 192.168.1.42 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.1.42 from 192.168.1.1
bound to 192.168.1.42 -- renewal in 9905 seconds.
[   42.534381][ T1143] NET: Registered protocol family 10
[   42.543497][ T1143] Segment Routing with IPv6
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1354 (syslogd)
. ok
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1381 (klogd)
. ok
[ ok ] Starting system message bus: dbus.
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting NFS common utilities: statd idmapd.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Running local boot scripts (/etc/rc.local).

Debian GNU/Linux 10 debian ttyS0

debian login: root
Password:
Last login: Sat Feb 29 21:20:17 PST 2020 from 192.168.1.47 on pts/0
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
It is well made!!! I wait for the following actions.Sorry for the delay there were urgent cases.
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
March 01, 2020 05:19AM
cergei,


> It is well made!!! I wait for the following
> actions.Sorry for the delay there were urgent
> cases.

Cool! it's all worked out. Now we will do the last step. Repeat the same step, but we add another command to save envs permanently.

Power up, interrupt serial console and execute these commands:

env default -a
setenv dtb_file '/boot/dts/kirkwood-netgear_stora_ms2000.dtb'
saveenv
boot

Let it boot, and log in to Debian. From now on the saved envs will let you boot automatically with or without serial console, and no interruption. Also open another terminal and log in through SSH to make sure that it works. If you'd like, post serial console log again for future reference..

After you are running Debian normally, you should also change the envs ipaddr, serverip, ethaddr to make it appropriate for your box. When you do this, you should test it in serial console to make sure it works, and then you can set it in Debian later. Ask questions if you are not sure you know how.

Call it a job well done :)

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Netgear Stora -loading rootfs Debian-5.2.9-kirkwood-tld-1-rootfs-bodhi.tar.bz2
March 01, 2020 07:05AM
Quote
After you are running Debian normally, you should also change the envs ipaddr, serverip, ethaddr to make it appropriate for your box. When you do this, you should test it in serial console to make sure it works, and then you can set it in Debian later. Ask questions if you are not sure you know how.
Iask you to help me with this, I"m not sure that I will do everything correctly myself
login as: root
root@192.168.1.42's password:
Linux debian 5.2.9-kirkwood-tld-1 #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sun Mar  1 04:22:13 2020
root@debian:~# cd /
root@debian:/# ls -l
total 76
drwxr-xr-x 21 root root  4096 Feb 16  2015 .
drwxr-xr-x 21 root root  4096 Feb 16  2015 ..
drwxr-xr-x  2 root root  4096 Aug 24  2019 bin
drwxr-xr-x  3 root root  4096 Mar  1 02:45 boot
drwxr-xr-x 13 root root  2920 Mar  1 04:21 dev
drwxr-xr-x 57 root root  4096 Mar  1 04:21 etc
drwxr-xr-x  2 root root  4096 Jan 22  2012 home
drwxr-xr-x 13 root root  4096 Aug 24  2019 lib
drwx------  2 root root 16384 Feb 24  2012 lost+found
drwxr-xr-x  2 root root  4096 Feb 24  2012 media
drwxr-xr-x  2 root root  4096 Feb 10  2015 mnt
drwxr-xr-x  2 root root  4096 Feb 24  2012 opt
dr-xr-xr-x 78 root root     0 Dec 31  1969 proc
drwx------  5 root root  4096 Mar  1 04:29 root
drwxr-xr-x 13 root root   600 Mar  1 04:29 run
drwxr-xr-x  2 root root  4096 Aug 24  2019 sbin
drwxr-xr-x  2 root root  4096 Feb 24  2012 srv
dr-xr-xr-x 12 root root     0 Mar  1 04:21 sys
drwxrwxrwt  2 root root    40 Mar  1 04:21 tmp
drwxr-xr-x 10 root root  4096 Feb 24  2012 usr
drwxr-xr-x 11 root root  4096 Dec 31  1969 var
root@debian:/#
Thanks to you huge!!! This is already a download to SSH. Further as I assume I will have to do it > >
Quote
1. Install Debian Stretch (OMV4 is not supported on Buster)
Install one disk in the left hand bay
Boot from USB stick made from image 4.12.1 from the 24th July 2017 found here: [url]https://forum.doozan.com/read.php?2,12096[/url]
Using fdisk, delete the existing partition
Create two partitions on /dev/sda, 1st one 8GB, second one 256MB. Make sure to use 't' command for partition 2 and set it to type 82
Create EXT4 partition on /dev/sda1 and label it rootfs - mkfs.ext4 -l rootfs /dev/sda1
Create swap partition on /dev/sda2 and label it swap - mkswap -L swap /dev/sda2
cd to /root and download the tarball from the 24th July 2017 found here: [url]https://forum.doozan.com/read.php?2,12096[/url] using wget
Mount partition /dev/sda1 on /mnt. Unzip tarball into /mnt
cd to /mnt
edit /mnt/etc/fstab - change file system type from EXT3 to EXT4 for rootfs entry and add "LABEL=swap swap swap default 0 0"
edit /mnt/etc/hosts. Add "127.0.1.1 stora.lan stora"
replace the contents of /mnt/etc/hostname with "stora"


2. Boot and update
Reboot - remove USB stick when uBoot starts
once booted run:
apt update
apt upgrade
cd /boot
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.12.1-kirkwood-tld-1 -d initrd.img-4.12.1-kirkwood-tld-1 uInitrd


3. Update kernel to 5.2.9
Download the kernel 5.2.9 tarball from 18th August 2019 at [url]https://forum.doozan.com/read.php?2,12096[/url]
run the following:
cd
mkdir boot_4.12.1
cd boot_4.12.1
cp -r /boot/* .
cd /boot
tar xjf /root/linux-5.2.9-kirkwood-tld-1-bodhi.tar.bz2
tar xf linux-dtb-5.2.9-kirkwood-tld-1.tar
apt-get remove flash-kernel
dpkg -i linux-image-5.2.9-kirkwood-tld-1_1.0_armel.deb
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.2.9-kirkwood-tld-1 -d vmlinuz-5.2.9-kirkwood-tld-1 uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.2.9-kirkwood-tld-1 -d initrd.img-5.2.9-kirkwood-tld-1 uInitrd
OMV4 requires systemd, so add it to boot env
fw_setenv set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params init=/bin/systemd'
systemd requires a larger /run tmpfs than the default, so add "none /run tmpfs defaults,size=20M 0 0" to /etc/fstab
reboot


4. Install OMV4
Backup current /boot
cd
mkdir boot_5.2.9_pre-OMV4
cd boot_5.2.9_pre-OMV4
cp -r /boot/* .
Prepare for OMV4 install
apt install -y aptitude curl apt-transport-https
Set up sources
echo "deb [url]http://packages.openmediavault.org/public[/url] arrakis main" > /etc/apt/sources.list.d/openmediavault.list
curl -k -s [url]http://packages.openmediavault.org/public/archive.key[/url] | apt-key add -
apt update
Start Installation
export LANG=C.UTF-8
export DEBIAN_FRONTEND=noninteractive
export APT_LISTCHANGES_FRONTEND=none
apt-get --yes --auto-remove --show-upgraded \
--allow-downgrades --allow-change-held-packages \
--no-install-recommends \
--option Dpkg::Options::="--force-confdef" \
--option DPkg::Options::="--force-confold" \
install postfix openmediavault-keyring openmediavault
cp /usr/share/openmediavault/templates/config.xml /etc/openmediavault/
omv-initsystem
omv-mkconf interfaces
omv-mkconf issue
If there are problems with masked services:
systemctl unmask openmediavault-beep-up
systemctl unmask openmediavault-beep-down
systemctl unmask openmediavault-cleanup-monit
systemctl unmask openmediavault-cleanup-php
systemctl unmask openmediavault-engined
systemctl unmask openmediavault-issue
apt install -y openmediavault
omv-initsystem
If network interface has stopped working after a reboot, add the following to /etc/network/interfaces:
auto eth0
allow-hotplug eth0
iface eth0 inet dhcp


5. Set up raid
Insert the second disk
Partition /dev/sdb the same as /dev/sda in step 1 but don't create filesystems
Create RAID 1 arrays on second drive and create filesystems:
mdadm --create /dev/md0 --metadata=0.90 --level=1 --raid-devices=2 missing /dev/sdb1
mdadm --create /dev/md1 --metadata=0.90 --level=1 --raid-devices=2 missing /dev/sdb2
mkfs.ext4 -L rootfs /dev/md0
mkswap -L swap /dev/md1
In the DEVICE section of /etc/mdadm/mdadm.conf add "DEVICE /dev/sd?*"
run:
mdadm --detail --scan >> /etc/mdadm/mdadm.conf
dpkg-reconfigure mdadm
cd /boot
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.2.9-kirkwood-tld-1 -d vmlinuz-5.2.9-kirkwood-tld-1 uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-5.2.9-kirkwood-tld-1 -d initrd.img-5.2.9-kirkwood-tld-1 uInitrd
clone rootfs from /dev/sda1:
mkdir /tmp/mnt
mount /dev/md0 /tmp/mnt
rsync -auHxv --exclude=/proc/* --exclude=/sys/* --exclude=/tmp/* /* /tmp/mnt
Power off the unit and remove disk 1
Power on the unit and make sure it boots off md0
check that swap mounts using the "free" command
Insert Disk 1. Note that this becomes /dev/sdb
Add the Disk 1 partitions to the RAID 1 Arrays:
mdadm --add /dev/md0 /dev/sdb1
mdadm --add /dev/md1 /dev/sdb2
Create partitions on the drives taking up the remaining free space
Create a third array:
mdadm --create /dev/md2 --level=1 --raid-devices=2 missing /dev/sda3
mdadm --add /dev/md2 /dev/sdb3


6. Add OMV Extras:
Install dependancies:
apt install -y dirmngr

install Extras:
wget -O - [url]https://github.com/OpenMediaVault-Plugin-Developers/packages/raw/master/install[/url] | bash



Thanks to Bodhi for all your hard work

Resources:

Serial port console: [url]https://github.com/Dees7/openstora/blob/master/pages/Root_Access_Via_Serial_Console.md[/url]
Installing Debian on Stora: [url]https://forum.doozan.com/read.php?2,12096[/url]
Upgrading uBoot on Stora: [url]https://forum.doozan.com/read.php?3,12381[/url]
Installing OMV: [url]https://forum.openmediavault.org/index.php/Thread/21234-Install-OMV4-on-Debian-9-Stretch/[/url]
OMV Extras: [url]http://omv-extras.org/[/url]
Setting up mdadm on Stora: [url]https://forum.doozan.com/read.php?2,27308[/url]

Edit: There were a few errors and omissions corrected



Edited 3 time(s). Last edit at 12/30/2019 08:02PM by fcollingwood.

If I don 't understand correctly, please direct me the right way.Thank you very much, For me your lessons are of great importance, I appreciate it highly.



Edited 1 time(s). Last edit at 03/01/2020 08:19AM by cergei.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: