Welcome! Log In Create A New Profile

Advanced

Debian on WD MyCloud EX2 Ultra

Posted by vzhilov 
Re: Debian on WD MyCloud EX2 Ultra
May 09, 2020 05:18PM
> here is my output:
>
> fw_printenv
> Cannot open /dev/mtd1: No such file or directory
>

OK then set_persistent_mac_address script will not work.

Let me see if I can get the DTS source for this box somewhere in this thread, and try to fix it. Which DTB are you running with?

-bodhi
===========================
Forum Wiki
bodhi's corner
wood
Re: Debian on WD MyCloud EX2 Ultra
May 09, 2020 05:27PM
bodhi Wrote:
-------------------------------------------------------
> Let me see if I can get the DTS source for this
> box somewhere in this thread, and try to fix it.
> Which DTB are you running with?

I use the DTS file from fox_exe.



wood
Re: Debian on WD MyCloud EX2 Ultra
May 10, 2020 06:42AM
wood Wrote:
-------------------------------------------------------
> bodhi Wrote:
> -------------------------------------------------------
> > Let me see if I can get the DTS source for this
> > box somewhere in this thread, and try to fix
> it.
> > Which DTB are you running with?
>
> I use the DTS file from fox_exe.

Try to create new one..not that I did something wrong before
Re: Debian on WD MyCloud EX2 Ultra
May 21, 2020 10:02AM
bodhi Wrote:
-------------------------------------------------------
> dtd and vzhilov,
>
> I lost track of this thread. When I released
> kernel 5.6.9, I forgot all about this box!
>
> Are you guys using the same DTS now?

Hi bodhi, sorry for late reply.

I have just take a look at both DTS files from me and vzhilov, there are only minor differences between them.
One big difference is sata1-blue-led and sata2-blue-led, which is GPIO_ACTIVE_LOW by me but high active by vzhilov. (on my EX2 Ultra box it is low active)

You can use e.g. my DTS for the next release. I attached it again in this reply.
Many thanks for your work.
Attachments:
open | download - armada-385-wdmc-Ex2-Ultra.dts (8.1 KB)
Re: Debian on WD MyCloud EX2 Ultra
May 21, 2020 05:06PM
dtd.2512,

Thanks! will see if I can put the fix for MAC address in and release it.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Debian on WD MyCloud EX2 Ultra
May 21, 2020 07:37PM
@dtd,

Here is the revised version of the DTS and its DTB. I've changed the file name to be consistent with what we have currently. I also change the machine name in the DTS (do a diff with your version to see the changes).

@all,

Please try this armada-385-wd-ex2-ultra.dtb. I've added a fix to keep the persistent MAC address (local MAC address will not be generated by the kernel).

-bodhi
===========================
Forum Wiki
bodhi's corner
Attachments:
open | download - armada-385-wd-ex2-ultra.dtb (17.9 KB)
open | download - armada-385-wd-ex2-ultra.dts (8.2 KB)
mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 27, 2020 09:04PM
bodhi Wrote:
-------------------------------------------------------
> @dtd,
>
> Here is the revised version of the DTS and its
> DTB. I've changed the file name to be consistent
> with what we have currently. I also change the
> machine name in the DTS (do a diff with your
> version to see the changes).
>
> @all,
>
> Please try this armada-385-wd-ex2-ultra.dtb. I've
> added a fix to keep the persistent MAC address
> (local MAC address will not be generated by the
> kernel).

dtb file works well with my clould mirror gen2.

I used with Kernel linux-5.6.9-mvebu-tld-1 package.


thanks
Re: Debian on WD MyCloud EX2 Ultra
June 27, 2020 10:39PM
mcmg2,

Thanks for the feedback! I will include this box DTB in the next release.

-bodhi
===========================
Forum Wiki
bodhi's corner
mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 28, 2020 06:04AM
here is dmesg

root@mario:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.6.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1.0 SMP PREEMPT Sat May 2 20:48:16 PDT 2020
[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: WD MyCloud Ex2 Ultra
[    0.000000] printk: bootconsole [earlycon0] enabled
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] percpu: Embedded 20 pages/cpu s52108 r8192 d21620 u81920
[    0.000000] pcpu-alloc: s52108 r8192 d21620 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 493204K/524288K available (10240K kernel code, 987K rwdata, 2996K rodata, 1024K init, 341K bss, 31084K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] random: get_random_u32 called from ____cache_alloc+0x338/0x794 with crng_init=0
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000008] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.008679] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns
[    0.020380] Switching to timer-based delay loop, resolution 1ns
[    0.027198] Ignoring duplicate/late registration of read_current_timer delay
[    0.034914] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.047035] Console: colour dummy device 80x30
[    0.052167] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000)
[    0.063435] pid_max: default: 32768 minimum: 301
[    0.068887] LSM: Security Framework initializing
[    0.074229] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.082211] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.090684] *** VALIDATE tmpfs ***
[    0.095143] *** VALIDATE proc ***
[    0.099260] *** VALIDATE cgroup ***
[    0.103428] *** VALIDATE cgroup2 ***
[    0.107731] CPU: Testing write buffer coherency: ok
[    0.113295] CPU0: Spectre v2: using BPIALL workaround
[    0.119187] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.177063] Setting up static identity map for 0x100000 - 0x100060
[    0.184008] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.189955] mvebu-pmsu: Initializing Power Management Service Unit
[    0.207031] rcu: Hierarchical SRCU implementation.
[    0.247031] smp: Bringing up secondary CPUs ...
[    0.307135] Booting CPU 1
[    0.310619] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.310623] CPU1: Spectre v2: using BPIALL workaround
[    0.322767] smp: Brought up 1 node, 2 CPUs
[    0.327565] SMP: Total of 2 processors activated (2664.00 BogoMIPS).
[    0.334585] CPU: All CPU(s) started in SVC mode.
[    0.340232] devtmpfs: initialized
[    0.346999] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.355742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.366267] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.373859] xor: measuring software checksum speed
[    0.477024]    arm4regs  :  2096.800 MB/sec
[    0.577022]    8regs     :  1584.400 MB/sec
[    0.677023]    32regs    :  1676.400 MB/sec
[    0.681881] xor: using function: arm4regs (2096.800 MB/sec)
[    0.688133] prandom: seed boundary self test passed
[    0.695244] prandom: 100 self tests passed
[    0.700023] pinctrl core: initialized pinctrl subsystem
[    0.706661] thermal_sys: Registered thermal governor 'step_wise'
[    0.707099] NET: Registered protocol family 16
[    0.719636] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.727684] audit: initializing netlink subsys (disabled)
[    0.734713] audit: type=2000 audit(0.700:1): state=initialized audit_enabled=0 res=1
[    0.743189] cpuidle: using governor ladder
[    0.747992] cpuidle: using governor menu
[    0.752790] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.761468] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.768124] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.776878] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.977051] raid6: int32x8  gen()   244 MB/s
[    1.147071] raid6: int32x8  xor()   166 MB/s
[    1.317079] raid6: int32x4  gen()   280 MB/s
[    1.487033] raid6: int32x4  xor()   181 MB/s
[    1.657034] raid6: int32x2  gen()   450 MB/s
[    1.827063] raid6: int32x2  xor()   258 MB/s
[    1.997028] raid6: int32x1  gen()   514 MB/s
[    2.167054] raid6: int32x1  xor()   205 MB/s
[    2.172007] raid6: using algorithm int32x1 gen() 514 MB/s
[    2.178075] raid6: .... xor() 205 MB/s, rmw enabled
[    2.183629] raid6: using intx1 recovery algorithm
[    2.189795] vgaarb: loaded
[    2.193727] SCSI subsystem initialized
[    2.210670] libata version 3.00 loaded.
[    2.210816] usbcore: registered new interface driver usbfs
[    2.217012] usbcore: registered new interface driver hub
[    2.223079] usbcore: registered new device driver usb
[    2.229131] mc: Linux media interface: v0.10
[    2.234115] videodev: Linux video capture interface: v2.00
[    2.240361] pps_core: LinuxPPS API ver. 1 registered
[    2.246009] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.255816] PTP clock support registered
[    2.261514] clocksource: Switched to clocksource arm_global_timer
[    3.132512] *** VALIDATE bpf ***
[    3.136602] VFS: Disk quotas dquot_6.6.0
[    3.141267] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.148980] *** VALIDATE ramfs ***
[    3.158680] NET: Registered protocol family 2
[    3.164217] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.173275] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.181732] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    3.189567] TCP: Hash tables configured (established 4096 bind 4096)
[    3.196721] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.203947] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.211708] NET: Registered protocol family 1
[    3.217108] RPC: Registered named UNIX socket transport module.
[    3.223718] RPC: Registered udp transport module.
[    3.229095] RPC: Registered tcp transport module.
[    3.234497] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.241621] PCI: CLS 0 bytes, default 64
[    3.246374] Trying to unpack rootfs image as initramfs...
[    3.630283] Freeing initrd memory: 9636K
[    3.635228] NetWinder Floating Point Emulator V0.97 (double precision)
[    3.642659] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    3.662569] Initialise system trusted keyrings
[    3.667712] Key type blacklist registered
[    3.672576] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    3.679770] zbud: loaded
[    3.683748] *** VALIDATE nfs ***
[    3.687684] *** VALIDATE nfs4 ***
[    3.691754] NFS: Registering the id_resolver key type
[    3.697487] Key type id_resolver registered
[    3.702394] Key type id_legacy registered
[    3.707086] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.714484] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.721777] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc.
[    3.729672] *** VALIDATE jffs2 ***
[    3.734047] orangefs_debugfs_init: called with debug mask: :none: :0:
[    3.741262] orangefs_init: module version upstream loaded
[    3.771829] async_tx: api initialized (async)
[    3.776868] Key type asymmetric registered
[    3.781677] Asymmetric key parser 'x509' registered
[    3.787268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    3.796860] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    3.806544] mv_xor f1060800.xor: Marvell shared XOR driver
[    3.872094] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    3.881688] mv_xor f1060900.xor: Marvell shared XOR driver
[    3.942079] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    3.988890] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.997210] printk: console [ttyS0] disabled
[    4.022948] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 12500000) is a 16550A
[    4.032619] printk: console [ttyS0] enabled
[    4.042454] printk: bootconsole [earlycon0] disabled
[    4.074758] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 12500000) is a 16550A
[    4.085490] ahci-mvebu f10a8000.sata: f10a8000.sata supply ahci not found, using dummy regulator
[    4.095094] ahci-mvebu f10a8000.sata: f10a8000.sata supply phy not found, using dummy regulator
[    4.104596] ahci-mvebu f10a8000.sata: f10a8000.sata supply target not found, using dummy regulator
[    4.114438] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    4.124251] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.134486] scsi host0: ahci-mvebu
[    4.138951] scsi host1: ahci-mvebu
[    4.143273] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
[    4.151948] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
[    4.161887] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    4.168977] nand: Hynix H27U2G8F2CTR-BC
[    4.173557] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    4.182293] Bad block table found at page 131008, version 0x01
[    4.189503] Bad block table found at page 130944, version 0x01
[    4.196478] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[    4.204207] Creating 8 MTD partitions on "pxa3xx_nand-0":
[    4.210341] 0x000000000000-0x000000500000 : "U-Boot"
[    4.217146] 0x000000500000-0x000000a00000 : "uImage"
[    4.223862] 0x000000a00000-0x000000f00000 : "uRamdisk"
[    4.230711] 0x000000f00000-0x00000c800000 : "image.cfs"
[    4.238049] 0x00000c800000-0x00000d700000 : "rescue fw"
[    4.245044] 0x00000d700000-0x00000eb00000 : "config"
[    4.251816] 0x00000eb00000-0x00000f500000 : "reserve1"
[    4.258691] 0x00000f500000-0x00000ff00000 : "reserve2"
[    4.266326] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    4.274933] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    4.286955] libphy: Fixed MDIO Bus: probed
[    4.293150] libphy: orion_mdio_bus: probed
[    4.301907] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    4.314599] mvneta f1034000.ethernet eth0: Using random mac address 42:6a:50:9a:29:4b
[    4.323716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.330995] ehci-pci: EHCI PCI platform driver
[    4.336270] ehci-orion: EHCI orion driver
[    4.341158] orion-ehci f1058000.usb: EHCI Host Controller
[    4.347332] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    4.355740] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
[    4.391535] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    4.398347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.407371] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.415340] usb usb1: Product: EHCI Host Controller
[    4.420944] usb usb1: Manufacturer: Linux 5.6.9-mvebu-tld-1 ehci_hcd
[    4.428037] usb usb1: SerialNumber: f1058000.usb
[    4.433866] hub 1-0:1.0: USB hub found
[    4.438359] hub 1-0:1.0: 1 port detected
[    4.444211] usbcore: registered new interface driver usblp
[    4.450519] usbcore: registered new interface driver usb-storage
[    4.457602] mousedev: PS/2 mouse device common for all mice
[    4.465129] armada38x-rtc f10a3800.rtc: registered as rtc0
[    4.471884] i2c /dev entries driver
[    4.479494] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
[    4.488526] watchdog: f1020300.watchdog: falling back to default timeout (171)
[    4.496832] orion_wdt: Initial timeout 171 sec
[    4.502467] device-mapper: uevent: version 1.0.3
[    4.508005] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    4.517407] device-mapper: multipath round-robin: version 1.2.0 loaded
[    4.524697] device-mapper: multipath queue-length: version 0.2.0 loaded
[    4.532056] device-mapper: multipath service-time: version 0.3.0 loaded
[    4.539431] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    4.546282] device-mapper: raid: Loading target version 1.15.1
[    4.582443] marvell-cesa f1090000.crypto: CESA device successfully registered
[    4.590677] hid: raw HID events driver (C) Jiri Kosina
[    4.596973] usbcore: registered new interface driver usbhid
[    4.603308] usbhid: USB HID core driver
[    4.607863] exFAT: Version 1.3.0
[    4.612251] drop_monitor: Initializing network drop monitor service
[    4.619562] NET: Registered protocol family 10
[    4.625468] Segment Routing with IPv6
[    4.629903] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.637692] NET: Registered protocol family 17
[    4.643019] 8021q: 802.1Q VLAN Support v1.8
[    4.647958] Key type dns_resolver registered
[    4.653136] ThumbEE CPU extension supported.
[    4.658131] Registering SWP/SWPB emulation handler
[    4.661542] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.663867] registered taskstats version 1
[    4.670582] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.675422] Loading compiled-in X.509 certificates
[    4.682522] ata2.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    4.687939] zswap: loaded using pool lzo/zbud
[    4.695336] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32)
[    4.707776] ata1.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    4.710607] Key type ._fscrypt registered
[    4.715236] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32)
[    4.719956] Key type .fscrypt registered
[    4.727332] ata2.00: configured for UDMA/133
[    4.731873] Key type fscrypt-provisioning registered
[    4.742824] ata1.00: configured for UDMA/133
[    4.746217] Key type big_key registered
[    4.758315] scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    4.767231] Key type encrypted registered
[    4.772304] scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    4.772486] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.782001] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    4.792220] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.798418] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    4.804469] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    4.810522] sd 1:0:0:0: [sdb] Write Protect is off
[    4.818421] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.823973] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    4.829950] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.830307] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    4.841583] sd 0:0:0:0: [sda] Write Protect is off
[    4.849855] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
[    4.855764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.861946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.862084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.880887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.888865] usb usb2: Product: xHCI Host Controller
[    4.894478] usb usb2: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.901572] usb usb2: SerialNumber: f10f0000.usb3
[    4.907482] hub 2-0:1.0: USB hub found
[    4.909907]  sdb: sdb1 sdb2 sdb3 sdb4
[    4.911997] hub 2-0:1.0: 1 port detected
[    4.919630]  sda: sda1 sda2 sda3 sda4
[    4.921363] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.931520] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    4.939800] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[    4.946984] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.947849] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[    4.956122] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    4.962869] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    4.971465] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.985278] usb usb3: Product: xHCI Host Controller
[    4.990883] usb usb3: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.997985] usb usb3: SerialNumber: f10f0000.usb3
[    5.003869] hub 3-0:1.0: USB hub found
[    5.008362] hub 3-0:1.0: 1 port detected
[    5.013662] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    5.019716] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    5.028061] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    5.038080] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
[    5.044791] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    5.053814] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.061784] usb usb4: Product: xHCI Host Controller
[    5.067387] usb usb4: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    5.074485] usb usb4: SerialNumber: f10f8000.usb3
[    5.080358] hub 4-0:1.0: USB hub found
[    5.084864] hub 4-0:1.0: 1 port detected
[    5.089824] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    5.095897] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    5.104145] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[    5.111281] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.120210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    5.129232] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.137199] usb usb5: Product: xHCI Host Controller
[    5.142809] usb usb5: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    5.149896] usb usb5: SerialNumber: f10f8000.usb3
[    5.155765] hub 5-0:1.0: USB hub found
[    5.160257] hub 5-0:1.0: 1 port detected
[    5.165847] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    5.173823] armada38x-rtc f10a3800.rtc: setting system clock to 2020-06-27T03:59:07 UTC (1593230347)
[    5.186073] Freeing unused kernel memory: 1024K
[    5.211997] Checked W+X mappings: passed, no W+X pages found
[    5.218388] Run /init as init process
[    5.222787]   with arguments:
[    5.222791]     /init
[    5.222793]   with environment:
[    5.222796]     HOME=/
[    5.222798]     TERM=linux
[    5.278524] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.282937] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.286807] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.451575] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    5.655928] usb 2-1: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.51
[    5.667399] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    5.675454] usb 2-1: Product: USB Storage
[    5.680188] usb 2-1: Manufacturer: Generic
[    5.685143] usb 2-1: SerialNumber: 000000009451
[    5.692050] usb-storage 2-1:1.0: USB Mass Storage device detected
[    5.709688] usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    5.717904] scsi host2: usb-storage 2-1:1.0
[    5.895511] md/raid1:md126: active with 2 out of 2 mirrors
[    5.960983] random: fast init done
[    6.097971] usbcore: registered new interface driver uas
[    6.104286] md126: detected capacity change from 0 to 2147418112
[    6.752853] scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    6.905644] sd 2:0:0:0: [sdc] 7959552 512-byte logical blocks: (4.08 GB/3.79 GiB)
[    6.914637] sd 2:0:0:0: [sdc] Write Protect is off
[    6.920156] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[    6.920885] sd 2:0:0:0: [sdc] No Caching mode page found
[    6.926947] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[    6.939254]  sdc: sdc1
[    6.944928] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[   16.882316] Btrfs loaded, crc32c=crc32c-generic
[   17.507707] process '/bin/fstype' started with executable stack
[   17.645715] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
[   17.687440] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[   18.443055] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   18.462160] systemd[1]: Detected architecture arm.
[   18.512527] systemd[1]: Set hostname to <mario>.
[   19.591144] systemd[1]: Listening on Journal Audit Socket.
[   19.631741] systemd[1]: Listening on udev Kernel Socket.
[   19.672618] systemd[1]: Created slice System Slice.
[   19.703958] systemd[1]: Mounting RPC Pipe File System...
[   19.741701] systemd[1]: Reached target Swap.
[   19.774120] systemd[1]: Mounting POSIX Message Queue File System...
[   19.811807] systemd[1]: Listening on fsck to fsckd communication Socket.
[   20.111747] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[   20.955005] random: crng init done
[   20.959140] random: 7 urandom warning(s) missed due to ratelimiting
[   21.383091] systemd-journald[1710]: Received request to flush runtime journal from PID 1
[   22.086968] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   22.105103] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   22.126621] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   22.450294] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   22.480120] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   26.999294] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[   27.138348] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl
[   27.977124] mvneta f1034000.ethernet eth0: PHY [f1072004.mdio-mii:00] driver [Marvell 88E1510] (irq=POLL)
[   27.987982] mvneta f1034000.ethernet eth0: configuring for phy/sgmii link mode
[   33.231890] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   45.959991] NFSD: Using UMH upcall client tracking operations.
[   45.966718] NFSD: starting 90-second grace period (net f0000039)
[   51.382693] fbcon: Taking over console
[   53.361819] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   53.378468] Bridge firewalling registered
[   53.750496] Initializing XFRM netlink socket
[   57.623119] eth0: renamed from vethd94b3ce
[   57.672539] device eth0 entered promiscuous mode
[   60.207312] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ 1059.671093] systemd[1]: apt-daily.timer: Adding 9h 34min 12.288856s random time.
[ 1060.862133] systemd[1]: apt-daily.timer: Adding 19min 25.111120s random time.
[ 1061.861351] systemd[1]: apt-daily.timer: Adding 10h 33min 27.960080s random time.
[ 1063.735346] systemd[1]: apt-daily.timer: Adding 1h 51min 15.098213s random time.
[ 1065.123945] systemd[1]: apt-daily.timer: Adding 27min 24.942059s random time.
[ 1066.007728] systemd[1]: apt-daily.timer: Adding 7h 56min 11.582675s random time.
[ 1067.174714] systemd[1]: apt-daily.timer: Adding 5h 33min 23.997972s random time.
[ 1068.181270] systemd[1]: apt-daily.timer: Adding 8h 13min 46.274569s random time.
[ 1071.655538] systemd[1]: apt-daily.timer: Adding 4h 46min 2.948159s random time.
[ 1082.427831] systemd[1]: apt-daily.timer: Adding 9h 21min 13.644869s random time.
[ 1083.576612] systemd[1]: apt-daily.timer: Adding 10h 22min 34.361114s random time.
[ 1084.453932] systemd[1]: apt-daily.timer: Adding 2h 29min 26.235582s random time.
[ 1085.650840] systemd[1]: apt-daily.timer: Adding 8h 23min 53.289267s random time.
[ 1086.892150] systemd[1]: apt-daily.timer: Adding 8h 49min 27.475059s random time.
[ 1087.838633] systemd[1]: apt-daily.timer: Adding 9h 1min 15.575984s random time.
[ 1088.829102] systemd[1]: apt-daily.timer: Adding 4h 2min 55.349844s random time.
[ 1089.790336] systemd[1]: apt-daily.timer: Adding 11h 48min 39.833931s random time.
[ 1094.096328] systemd[1]: apt-daily.timer: Adding 8h 59min 2.604592s random time.
[ 1095.419407] systemd[1]: apt-daily.timer: Adding 1h 28min 24.077947s random time.
[ 1096.309946] systemd[1]: apt-daily.timer: Adding 8h 44min 25.236255s random time.
[ 1099.033595] systemd[1]: apt-daily.timer: Adding 9h 26min 13.145403s random time.
[ 1100.419810] systemd[1]: apt-daily.timer: Adding 3h 12min 17.186252s random time.
[ 1101.377074] systemd[1]: apt-daily.timer: Adding 5h 56min 3.697819s random time.
[ 1102.587983] systemd[1]: apt-daily.timer: Adding 2h 6min 37.460742s random time.
[ 1103.822407] systemd[1]: apt-daily.timer: Adding 7h 52min 34.278844s random time.
root@mario:~#

======
moderator edit: please use code tag (Formatted code button) to post log.



Edited 1 time(s). Last edit at 06/28/2020 03:43PM by bodhi.
Re: Debian on WD MyCloud EX2 Ultra
June 28, 2020 04:19PM
mcmg2 ,

The boot looks really good!

One thing is still a problem is the MAC address still generated randomly! But it is OK for me to release the DTB support for the new kernel update.

To work around this problem, see rootfs release notes:


Quote
https://forum.doozan.com/read.php?2,32146

Note3:

To enable the network dynamic IP to stay consistent after each reboot, and also for faster boot. In this rootfs, a script is executed during kernel booting (in /etc/rc.local), to detect if a local MAC address was assigned during boot, and then set the persistent MAC address to what is currently defined in u-boot env ethaddr.

/root/set_persistent_mac_address

-bodhi
===========================
Forum Wiki
bodhi's corner
mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 28, 2020 07:12PM
here is fw_printenv

root@mario:~# fw_printenv
Warning: Bad CRC, using default environment
bootargs=
bootcmd=
bootdelay=2
baudrate=115200
arch=sandbox
cpu=sandbox
board=sandbox
board_name=sandbox
stdin=serial,cros-ec-keyb,usbkbd
stdout=serial,vidconsole
stderr=serial,vidconsole
ethaddr=00:00:11:22:33:44
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ipaddr=1.2.3.4
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
boot_net_pci_enum=pci enum
boot_net_usb_start=usb start
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=host1 host0
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_host1=setenv devnum 1; run host_boot
bootcmd_host0=setenv devnum 0; run host_boot
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
bootm_size=0x10000000
kernel_addr_r=0x1000000
fdt_addr_r=0xc00000
ramdisk_addr_r=0x2000000
scriptaddr=0x1000
pxefile_addr_r=0x2000
root@mario:~#
Re: Debian on WD MyCloud EX2 Ultra
June 28, 2020 09:50PM
mcmg2,

> root@mario:~# fw_printenv
> Warning: Bad CRC, using default environment

Meaning that the envs area has not been defined properly in the rootfs.


All,

Do you have serial console? if you do, post the serial boot log, I recall the envs location and size is shown in Marvell stock u-boot. If I forgot that is already somewhere in this thread, please remind me.

I need to see that to make it possible to list and change envs in Debian.

-bodhi
===========================
Forum Wiki
bodhi's corner
mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 29, 2020 09:46PM
here is sereal boot log


▒!e▒- Version: 2.0

Load WD GrandTeton Serdes Config:
board SerDes lanes topology details:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  06   |  SATA0      |
 |   1    |  05   |  PCIe0      |
 |   2    |  06   DDR3 Training Sequence - Switching XBAR Window to FastPath Win                                           dow
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED

 __   __                      _ _
|  \/  | __ _ _ ____   _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| |  | | (_| | |   \ V /  __/ | |
|_|  |_|\__,_|_|    \_/ \___|_|_|
         _   _     ____              _
        | | | |   | __ )  ___   ___ | |_
        | | | |___|  _ \ / _ \ / _ \| __|
        | |_| |___| |_) | (_) | (_) | |_
         \___/    |____/ \___/ \___/ \__|
 ** LOADER **


U-Boot 2013.01-g7c1da33-dirty_v1.04 (Jul 17 2017 - 18:43:06) Marvell version: 20                                           14_T3.0p6

mvBoardIdIndexGet(boardId) = 1
Board: GrandTeton DB6820
SoC:   MV88F6820 Rev A0
       running 2 CPUs
CPU:   ARM Cortex A9 MPCore (Rev 1) LE
       CPU 0
       CPU    @ 1332 [MHz]
       L2     @ 666 [MHz]
       TClock @ 200 [MHz]
       DDR    @ 666 [MHz]
       DDR 32 Bit Width, FastPath Memory Access, DLB Enabled, ECC Disabled
DRAM:  512 MiB

Map:   Code:                    0x1fece000:0x1ff96010
       BSS:                     0x1ffef654
       Stack:                   0x1f9cdf20
       Heap:                    0x1f9ce000:0x1fece000
raise: Signal # 8 caught
raise: Signal # 8 caught
       U-Boot Environment:      0x00000000:0x00080000 (NAND)

NAND:  ID: daad ,256 MiB
MMC:   mv_sdh: 0
PCI-e 0: Detected No Link.
USB2.0 0: Host Mode
USB3.0 0: Host Mode
USB3.0 1: Host Mode
Board configuration detected:
Creating 1 MTD partitions on "nand0":
0x00000f500000-0x00000ff00000 : "mtd=7"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=7"
UBI: MTD device size:            10 MiB
UBI: number of good PEBs:        80
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             32
UBI: total number of reserved PEBs: 48
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 3/1
UBIFS: mounted UBI device 0, volume 0, name "reserve2"
UBIFS: mounted read-only
UBIFS: file system size:   4063232 bytes (3968 KiB, 3 MiB, 32 LEBs)
UBIFS: journal size:       1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root:  200807 bytes (196 KiB)
Loading file '/mac_addr' to addr 0x02000000 with size 18 (0x00000012)...
Done
Set lan 2 WakeOnLan ok
Enable HD1
Enable HD2
Net:
|  port  | Interface | PHY address  |
|--------|-----------|--------------|
| egiga0 |   RGMII   |   In-Band    |
| egiga1 |   RGMII   |   In-Band    |
| egiga2 |   SGMII   |     0x00     |
egiga0, egiga1, egiga2 [PRIME]
Hit any key to stop autoboot:  0
Booting from USB ...
(Re)start USB...
USB0:   Port (usbActive) : 0    Interface (usbType = 3) : USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
(Re)start USB...
USB0:   Port (usbActive) : 0    Interface (usbType = 3) : USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
loading Image ...
5305366 bytes read in 577 ms (8.8 MiB/s)
loading uInitrd ...
9864958 bytes read in 731 ms (12.9 MiB/s)
## Booting image at 02000000 ...
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-5.6.9-mvebu-tld-1
   Created:      2020-06-27   3:15:24 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5305302 Bytes = 5.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02900000 ...
   Image Name:   initramfs-5.6.9-mvebu-tld-1
   Created:      2020-06-27   3:15:48 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9864894 Bytes = 9.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.6.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1.0 SMP PREEMPT Sat May 2 20:48:16 PDT 2020
[    0.000000][    T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000][    T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][    T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writealloc
[    0.000000][    T0] percpu: Embedded 20 pages/cpu s52108 r8192 d21620 u81920
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
[    0.000000][    T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000][    T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000][    T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000][    T0] Memory: 493204K/524288K available (10240K kernel code, 987K rwdata, 2996K rodata, 1024K init, 341K bss, 31084K reserved, 0K cma-reserved, 0K highmem)
[    0.000000][    T0] random: get_random_u32 called from ____cache_alloc+0x338/0x794 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000][    T0] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000][    T0] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000][    T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000][    T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000][    T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000008][    T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.008679][    T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns
[    0.020380][    T0] Switching to timer-based delay loop, resolution 1ns
[    0.027198][    T0] Ignoring duplicate/late registration of read_current_timer delay
[    0.034915][    T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.047035][    T0] Console: colour dummy device 80x30
[    0.052167][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000)
[    0.063435][    T0] pid_max: default: 32768 minimum: 301
[    0.068888][    T0] LSM: Security Framework initializing
[    0.074230][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.082212][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.090685][    T0] *** VALIDATE tmpfs ***
[    0.095143][    T0] *** VALIDATE proc ***
[    0.099260][    T0] *** VALIDATE cgroup ***
[    0.103428][    T0] *** VALIDATE cgroup2 ***
[    0.107729][    T0] CPU: Testing write buffer coherency: ok
[    0.113293][    T0] CPU0: Spectre v2: using BPIALL workaround
[    0.119185][    T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.177064][    T1] Setting up static identity map for 0x100000 - 0x100060
[    0.184008][    T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.189956][    T1] mvebu-pmsu: Initializing Power Management Service Unit
[    0.207032][    T1] rcu: Hierarchical SRCU implementation.
[    0.247033][    T1] smp: Bringing up secondary CPUs ...
[    0.307135][    T1] Booting CPU 1
[    0.310618][    T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.310623][    T0] CPU1: Spectre v2: using BPIALL workaround
[    0.322764][    T1] smp: Brought up 1 node, 2 CPUs
[    0.327562][    T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS).
[    0.334582][    T1] CPU: All CPU(s) started in SVC mode.
[    0.340228][    T1] devtmpfs: initialized
[    0.347000][    T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.355742][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.366267][    T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.373860][    T1] xor: measuring software checksum speed
[    0.477025][    T1]    arm4regs  :  2096.800 MB/sec
[    0.577023][    T1]    8regs     :  1584.400 MB/sec
[    0.677024][    T1]    32regs    :  1676.400 MB/sec
[    0.681882][    T1] xor: using function: arm4regs (2096.800 MB/sec)
[    0.688135][    T1] prandom: seed boundary self test passed
[    0.695244][    T1] prandom: 100 self tests passed
[    0.700023][    T1] pinctrl core: initialized pinctrl subsystem
[    0.706666][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    0.707106][    T1] NET: Registered protocol family 16
[    0.719646][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.727700][    T1] audit: initializing netlink subsys (disabled)
[    0.734721][   T34] audit: type=2000 audit(0.700:1): state=initialized audit_enabled=0 res=1
[    0.743197][    T1] cpuidle: using governor ladder
[    0.748000][    T1] cpuidle: using governor menu
[    0.752799][    T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.761477][    T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.768131][    T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.776884][    T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.977058][    T1] raid6: int32x8  gen()   244 MB/s
[    1.147072][    T1] raid6: int32x8  xor()   168 MB/s
[    1.317074][    T1] raid6: int32x4  gen()   280 MB/s
[    1.487064][    T1] raid6: int32x4  xor()   179 MB/s
[    1.657055][    T1] raid6: int32x2  gen()   449 MB/s
[    1.827034][    T1] raid6: int32x2  xor()   258 MB/s
[    1.997059][    T1] raid6: int32x1  gen()   513 MB/s
[    2.167050][    T1] raid6: int32x1  xor()   220 MB/s
[    2.171996][    T1] raid6: using algorithm int32x1 gen() 513 MB/s
[    2.178074][    T1] raid6: .... xor() 220 MB/s, rmw enabled
[    2.183623][    T1] raid6: using intx1 recovery algorithm
[    2.189733][    T1] vgaarb: loaded
[    2.193624][    T1] SCSI subsystem initialized
[    2.198703][    T1] usbcore: registered new interface driver usbfs
[    2.204934][    T1] usbcore: registered new interface driver hub
[    2.211034][    T1] usbcore: registered new device driver usb
[    2.217426][    T1] mc: Linux media interface: v0.10
[    2.222458][    T1] videodev: Linux video capture interface: v2.00
[    2.228884][    T1] pps_core: LinuxPPS API ver. 1 registered
[    2.234521][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.244396][    T1] PTP clock support registered
[    2.250377][    T1] clocksource: Switched to clocksource arm_global_timer
[    3.121573][    T1] *** VALIDATE bpf ***
[    3.125666][    T1] VFS: Disk quotas dquot_6.6.0
[    3.130332][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.138052][    T1] *** VALIDATE ramfs ***
[    3.151616][    T1] NET: Registered protocol family 2
[    3.157119][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.166169][    T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.174617][    T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    3.182476][    T1] TCP: Hash tables configured (established 4096 bind 4096)
[    3.189596][    T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.196821][    T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.204587][    T1] NET: Registered protocol family 1
[    3.210000][    T1] RPC: Registered named UNIX socket transport module.
[    3.216606][    T1] RPC: Registered udp transport module.
[    3.222007][    T1] RPC: Registered tcp transport module.
[    3.227383][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.234504][    T1] PCI: CLS 0 bytes, default 64
[    3.239248][    T1] Trying to unpack rootfs image as initramfs...
[    3.620985][    T1] Freeing initrd memory: 9636K
[    3.625742][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[    3.633265][    T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    3.653905][    T1] Initialise system trusted keyrings
[    3.659047][    T1] Key type blacklist registered
[    3.663864][    T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    3.671096][    T1] zbud: loaded
[    3.675084][    T1] *** VALIDATE nfs ***
[    3.679020][    T1] *** VALIDATE nfs4 ***
[    3.683074][    T1] NFS: Registering the id_resolver key type
[    3.688809][    T1] Key type id_resolver registered
[    3.693699][    T1] Key type id_legacy registered
[    3.698392][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.705818][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.713110][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    3.721040][    T1] *** VALIDATE jffs2 ***
[    3.725427][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    3.732663][    T1] orangefs_init: module version upstream loaded
[    3.762748][    T1] async_tx: api initialized (async)
[    3.767787][    T1] Key type asymmetric registered
[    3.772598][    T1] Asymmetric key parser 'x509' registered
[    3.778251][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    3.788343][    T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    3.798908][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[    3.860967][    T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    3.870692][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[    3.930951][    T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    3.998683][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.007431][    T1] printk: console [ttyS0] disabled
[    4.032688][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 12500000) is a 16550A
[    4.042363][    T1] printk: console [ttyS0] enabled
[    4.042363][    T1] printk: console [ttyS0] enabled
[    4.052198][    T1] printk: bootconsole [earlycon0] disabled
[    4.052198][    T1] printk: bootconsole [earlycon0] disabled
[    4.084587][    T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 12500000) is a 16550A
[    4.095648][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply ahci not found, using dummy regulator
[    4.105279][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply phy not found, using dummy regulator
[    4.114785][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply target not found, using dummy regulator
[    4.124607][    T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    4.134417][    T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.144861][    T1] scsi host0: ahci-mvebu
[    4.149388][    T1] scsi host1: ahci-mvebu
[    4.153803][    T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
[    4.162494][    T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
[    4.172167][    T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    4.179272][    T1] nand: Hynix H27U2G8F2CTR-BC
[    4.183843][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    4.192555][    T1] Bad block table found at page 131008, version 0x01
[    4.199766][    T1] Bad block table found at page 130944, version 0x01
[    4.206736][    T1] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[    4.214443][    T1] Creating 8 MTD partitions on "pxa3xx_nand-0":
[    4.220579][    T1] 0x000000000000-0x000000500000 : "U-Boot"
[    4.227180][    T1] 0x000000500000-0x000000a00000 : "uImage"
[    4.233720][    T1] 0x000000a00000-0x000000f00000 : "uRamdisk"
[    4.240406][    T1] 0x000000f00000-0x00000c800000 : "image.cfs"
[    4.247532][    T1] 0x00000c800000-0x00000d700000 : "rescue fw"
[    4.254315][    T1] 0x00000d700000-0x00000eb00000 : "config"
[    4.260891][    T1] 0x00000eb00000-0x00000f500000 : "reserve1"
[    4.267587][    T1] 0x00000f500000-0x00000ff00000 : "reserve2"
[    4.274762][    T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    4.283354][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    4.294529][    T1] libphy: Fixed MDIO Bus: probed
[    4.300052][    T1] libphy: orion_mdio_bus: probed
[    4.308302][    T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    4.320104][    T1] mvneta f1034000.ethernet eth0: Using random mac address ca:b0:3e:b8:ca:11
[    4.329032][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.336332][    T1] ehci-pci: EHCI PCI platform driver
[    4.341555][    T1] ehci-orion: EHCI orion driver
[    4.346444][    T1] orion-ehci f1058000.usb: EHCI Host Controller
[    4.352604][    T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    4.361002][    T1] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
[    4.390400][    T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    4.397211][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.406238][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.414209][    T1] usb usb1: Product: EHCI Host Controller
[    4.419812][    T1] usb usb1: Manufacturer: Linux 5.6.9-mvebu-tld-1 ehci_hcd
[    4.426906][    T1] usb usb1: SerialNumber: f1058000.usb
[    4.432650][    T1] hub 1-0:1.0: USB hub found
[    4.437142][    T1] hub 1-0:1.0: 1 port detected
[    4.442722][    T1] usbcore: registered new interface driver usblp
[    4.448987][    T1] usbcore: registered new interface driver usb-storage
[    4.455970][    T1] mousedev: PS/2 mouse device common for all mice
[    4.463228][    T1] armada38x-rtc f10a3800.rtc: registered as rtc0
[    4.469664][    T1] i2c /dev entries driver
[    4.476605][    T1] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
[    4.485634][    T1] watchdog: f1020300.watchdog: falling back to default timeout (171)
[    4.493842][    T1] orion_wdt: Initial timeout 171 sec
[    4.499343][    T1] device-mapper: uevent: version 1.0.3
[    4.501804][ T1250] ata2: SATA link down (SStatus 0 SControl 300)
[    4.510988][    T1] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    4.520186][ T1246] ata1: SATA link down (SStatus 0 SControl 300)
[    4.526539][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[    4.533845][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[    4.541205][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[    4.548582][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    4.556067][    T1] device-mapper: raid: Loading target version 1.15.1
[    4.590868][    T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[    4.599098][    T1] hid: raw HID events driver (C) Jiri Kosina
[    4.605408][    T1] usbcore: registered new interface driver usbhid
[    4.611760][    T1] usbhid: USB HID core driver
[    4.616317][    T1] exFAT: Version 1.3.0
[    4.620737][    T1] drop_monitor: Initializing network drop monitor service
[    4.628045][    T1] NET: Registered protocol family 10
[    4.633964][    T1] Segment Routing with IPv6
[    4.638402][    T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.646168][    T1] NET: Registered protocol family 17
[    4.651495][    T1] 8021q: 802.1Q VLAN Support v1.8
[    4.656436][    T1] Key type dns_resolver registered
[    4.661615][    T1] ThumbEE CPU extension supported.
[    4.666610][    T1] Registering SWP/SWPB emulation handler
[    4.672360][    T1] registered taskstats version 1
[    4.677179][    T1] Loading compiled-in X.509 certificates
[    4.682797][    T1] zswap: loaded using pool lzo/zbud
[    4.688070][    T1] Key type ._fscrypt registered
[    4.692846][    T1] Key type .fscrypt registered
[    4.697488][    T1] Key type fscrypt-provisioning registered
[    4.717575][    T1] Key type big_key registered
[    4.728693][    T1] Key type encrypted registered
[    4.736044][   T52] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.742129][   T52] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    4.750479][   T52] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    4.760496][   T52] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
[    4.767210][   T52] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.776235][   T52] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.784225][   T52] usb usb2: Product: xHCI Host Controller
[    4.789829][   T52] usb usb2: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.796924][   T52] usb usb2: SerialNumber: f10f0000.usb3
[    4.802790][   T52] hub 2-0:1.0: USB hub found
[    4.807288][   T52] hub 2-0:1.0: 1 port detected
[    4.812180][   T52] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.818233][   T52] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    4.826488][   T52] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[    4.833645][   T52] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.842574][   T52] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    4.851599][   T52] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.859559][   T52] usb usb3: Product: xHCI Host Controller
[    4.865170][   T52] usb usb3: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.872265][   T52] usb usb3: SerialNumber: f10f0000.usb3
[    4.878020][   T52] hub 3-0:1.0: USB hub found
[    4.882525][   T52] hub 3-0:1.0: 1 port detected
[    4.887638][   T52] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    4.893710][   T52] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    4.902022][   T52] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    4.912032][   T52] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
[    4.918727][   T52] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.927753][   T52] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.935722][   T52] usb usb4: Product: xHCI Host Controller
[    4.941333][   T52] usb usb4: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.948419][   T52] usb usb4: SerialNumber: f10f8000.usb3
[    4.954203][   T52] hub 4-0:1.0: USB hub found
[    4.958693][   T52] hub 4-0:1.0: 1 port detected
[    4.963580][   T52] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    4.969632][   T52] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    4.977884][   T52] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[    4.985026][   T52] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.993953][   T52] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    5.002972][   T52] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.010940][   T52] usb usb5: Product: xHCI Host Controller
[    5.016543][   T52] usb usb5: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    5.023637][   T52] usb usb5: SerialNumber: f10f8000.usb3
[    5.029427][   T52] hub 5-0:1.0: USB hub found
[    5.033931][   T52] hub 5-0:1.0: 1 port detected
[    5.039375][    T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    5.047187][    T1] armada38x-rtc f10a3800.rtc: setting system clock to 2020-06-30T02:40:20 UTC (1593484820)
[    5.059434][    T1] Freeing unused kernel memory: 1024K
[    5.100824][    T1] Checked W+X mappings: passed, no W+X pages found
[    5.107216][    T1] Run /init as init process
Loading, please wait...
starting version 232
[    5.167398][ T1555] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.171851][ T1556] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.175692][ T1555] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.220430][   T52] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    5.414835][   T52] usb 2-1: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.51
[    5.424605][   T52] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    5.444325][   T52] usb 2-1: Product: USB Storage
[    5.449084][   T52] usb 2-1: Manufacturer: Generic
[    5.459248][   T52] usb 2-1: SerialNumber: 000000009451
[    5.466731][   T52] usb-storage 2-1:1.0: USB Mass Storage device detected
[    5.487232][   T52] usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    5.495197][   T52] scsi host2: usb-storage 2-1:1.0
[    5.917293][ T1574] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[    6.501721][  T346] scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    6.657006][    T7] sd 2:0:0:0: [sda] 7959552 512-byte logical blocks: (4.08 GB/3.79 GiB)
[    6.665996][    T7] sd 2:0:0:0: [sda] Write Protect is off
[    6.672271][    T7] sd 2:0:0:0: [sda] No Caching mode page found
[    6.678313][    T7] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    6.691598][    T7]  sda: sda1
[    6.701250][    T7] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    6.791709][    C0] random: fast init done
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [   16.040879][ T1606] Btrfs loaded, crc32c=crc32c-generic
Scanning for Btrfs filesystems
done.
[   16.616559][ T1624] process '/bin/fstype' started with executable stack
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 68448/248992 files, 659241/994560 blocks
done.
[   20.372602][ T1635] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   20.414307][ T1635] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   21.151752][    T1] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   21.170857][    T1] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 29, 2020 10:57PM
Marvell>> printenv
CASset=max
MALLOC_len=5
MPmode=SMP
autoload=no
baudrate=115200
boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=run bootcmd_usb; run bootcmd_stock; reset
bootcmd_auto=stage_boot $boot_order
bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000;
bootcmd_stock=echo Booting from stock ... ; run set_bootargs_stock; printenv bootargs; nand read.e 0xa00000 0x500000 0x500000;nand read.e 0xf00000 0xa00000 0x500000;bootm 0xa00000 0xf00000
bootcmd_usb=echo Booting from USB ...; usb start; setenv fdt_skip_update yes; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr $load_initrd_addr; else bootm $load_image_addr; fi; fi
bootdelay=1
bootdev=usb
cacheShare=no
console=console=ttyS0,115200
device=0:1
device_partition=0:1
disaMvPnp=no
eeeEnable=no
enaClockGating=no
enaCpuStream=no
enaFPU=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:20:21:3e
eth1mtu=1500
eth2addr=00:50:43:20:f2:3e
eth2mtu=1500
eth3addr=00:50:43:21:f2:20
eth3mtu=1500
ethact=egiga2
ethaddr=00:50:43:f2:21:3e
ethmtu=1500
ethprime=egiga2
fdt_addr=2040000
fdt_skip_update=yes
fdtaddr=0x1000000
fdtfile=armada-38x-modular.dtb
filesize=12
ide_path=/
image_name=uImage
initrd_name=uInitrd
ipaddr=192.168.11.110
kernel_addr_r=2080000
lcd0_enable=0
lcd0_params=640x480-16@60
lcd_panel=0
load_image=echo loading Image ...; ext2load $bootdev $device $load_image_addr /boot/uImage
load_image_addr=0x02000000
load_initrd=echo loading uInitrd ...; ext2load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x2900000
loadaddr=0x02000000
loads_echo=0
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=armada-nand
mtdparts=mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
mv_pon_addr=00:50:43:3e:f2:20
nandEcc=nfcConfig=4bitecc
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,0
pcieTune=no
pexMode=RC
pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
ramdisk_addr_r=2880000
rootpath=/srv/nfs/
sata_delay_reset=0
sata_dma_mode=yes
script_addr_r=3000000
script_name=boot.scr
serverip=192.168.11.114
set_bootargs_stock=setenv bootargs root=/dev/ram console=ttyS0,115200
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
usb0Mode=host
usbActive=0
usbType=3
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81

Environment size: 4231/524284 bytes
Marvell>>
Re: Debian on WD MyCloud EX2 Ultra
June 29, 2020 11:44PM
mcmg2,

In serial console, before booting,

setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial'
and then boot
boot

Login to Debian, edit /etc/fw_env.config to have this content:
# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
/dev/mtd0 0x00080000 0x20000 0x20000

and check to see if you can list the envs
fw_printenv
And post serial console log here.

-bodhi
===========================
Forum Wiki
bodhi's corner
mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 30, 2020 12:39AM
boot log

Marvell>> setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial'                                                                                                                   Marvell>> boot                                                                                                                       Booting from USB ...
(Re)start USB...
USB0:   Port (usbActive) : 0    Interface (usbType = 3) : USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
(Re)start USB...
USB0:   Port (usbActive) : 0    Interface (usbType = 3) : USB XHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
       scanning usb for ethernet devices... 0 Ethernet Device(s) found
loading Image ...
5305366 bytes read in 577 ms (8.8 MiB/s)
loading uInitrd ...
9864958 bytes read in 730 ms (12.9 MiB/s)
## Booting image at 02000000 ...
## Booting kernel from Legacy Image at 02000000 ...
   Image Name:   Linux-5.6.9-mvebu-tld-1
   Created:      2020-06-27   3:15:24 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5305302 Bytes = 5.1 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 02900000 ...
   Image Name:   initramfs-5.6.9-mvebu-tld-1
   Created:      2020-06-27   3:15:48 UTC
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    9864894 Bytes = 9.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000][    T0] Booting Linux on physical CPU 0x0
[    0.000000][    T0] Linux version 5.6.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1.0 SMP PREEMPT Sat May 2 20:48:16 PDT 2020
[    0.000000][    T0] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[    0.000000][    T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000][    T0] OF: fdt: Machine model: WD MyCloud Ex2 Ultra
[    0.000000][    T0] printk: bootconsole [earlycon0] enabled
[    0.000000][    T0] Memory policy: Data cache writealloc
[    0.000000][    T0] percpu: Embedded 20 pages/cpu s52108 r8192 d21620 u81920
[    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000][    T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=pxa3xx_nand-0:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2) earlyprintk=serial
[    0.000000][    T0] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000][    T0] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000][    T0] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000][    T0] Memory: 493204K/524288K available (10240K kernel code, 987K rwdata, 2996K rodata, 1024K init, 341K bss, 31084K reserved, 0K cma-reserved, 0K highmem)
[    0.000000][    T0] random: get_random_u32 called from ____cache_alloc+0x338/0x794 with crng_init=0
[    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
[    0.000000][    T0] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000][    T0]  Tasks RCU enabled.
[    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000][    T0] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000][    T0] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000][    T0] L2C-310 D prefetch enabled, offset 1 lines
[    0.000000][    T0] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000][    T0] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[    0.000000][    T0] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[    0.000008][    T0] sched_clock: 64 bits at 666MHz, resolution 1ns, wraps every 4398046511103ns
[    0.008680][    T0] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x999999d70a, max_idle_ns: 440795225152 ns
[    0.020381][    T0] Switching to timer-based delay loop, resolution 1ns
[    0.027201][    T0] Ignoring duplicate/late registration of read_current_timer delay
[    0.034917][    T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[    0.047038][    T0] Console: colour dummy device 80x30
[    0.052170][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 1332.00 BogoMIPS (lpj=6660000)
[    0.063438][    T0] pid_max: default: 32768 minimum: 301
[    0.068890][    T0] LSM: Security Framework initializing
[    0.074232][    T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.082214][    T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.090688][    T0] *** VALIDATE tmpfs ***
[    0.095146][    T0] *** VALIDATE proc ***
[    0.099264][    T0] *** VALIDATE cgroup ***
[    0.103431][    T0] *** VALIDATE cgroup2 ***
[    0.107733][    T0] CPU: Testing write buffer coherency: ok
[    0.113297][    T0] CPU0: Spectre v2: using BPIALL workaround
[    0.119190][    T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.177068][    T1] Setting up static identity map for 0x100000 - 0x100060
[    0.184013][    T1] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[    0.189960][    T1] mvebu-pmsu: Initializing Power Management Service Unit
[    0.207035][    T1] rcu: Hierarchical SRCU implementation.
[    0.247035][    T1] smp: Bringing up secondary CPUs ...
[    0.307138][    T1] Booting CPU 1
[    0.310622][    T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.310627][    T0] CPU1: Spectre v2: using BPIALL workaround
[    0.322770][    T1] smp: Brought up 1 node, 2 CPUs
[    0.327568][    T1] SMP: Total of 2 processors activated (2664.00 BogoMIPS).
[    0.334588][    T1] CPU: All CPU(s) started in SVC mode.
[    0.340241][    T1] devtmpfs: initialized
[    0.347005][    T1] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.355756][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.366284][    T1] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.373875][    T1] xor: measuring software checksum speed
[    0.477028][    T1]    arm4regs  :  2096.800 MB/sec
[    0.577027][    T1]    8regs     :  1584.400 MB/sec
[    0.677028][    T1]    32regs    :  1676.400 MB/sec
[    0.681886][    T1] xor: using function: arm4regs (2096.800 MB/sec)
[    0.688139][    T1] prandom: seed boundary self test passed
[    0.695248][    T1] prandom: 100 self tests passed
[    0.700027][    T1] pinctrl core: initialized pinctrl subsystem
[    0.706658][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    0.707097][    T1] NET: Registered protocol family 16
[    0.719634][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.727680][    T1] audit: initializing netlink subsys (disabled)
[    0.734698][   T34] audit: type=2000 audit(0.700:1): state=initialized audit_enabled=0 res=1
[    0.743171][    T1] cpuidle: using governor ladder
[    0.747973][    T1] cpuidle: using governor menu
[    0.752772][    T1] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.761449][    T1] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.768104][    T1] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[    0.776857][    T1] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[    0.977054][    T1] raid6: int32x8  gen()   244 MB/s
[    1.147060][    T1] raid6: int32x8  xor()   169 MB/s
[    1.317105][    T1] raid6: int32x4  gen()   280 MB/s
[    1.487044][    T1] raid6: int32x4  xor()   179 MB/s
[    1.657061][    T1] raid6: int32x2  gen()   450 MB/s
[    1.827023][    T1] raid6: int32x2  xor()   256 MB/s
[    1.997049][    T1] raid6: int32x1  gen()   513 MB/s
[    2.167072][    T1] raid6: int32x1  xor()   220 MB/s
[    2.172022][    T1] raid6: using algorithm int32x1 gen() 513 MB/s
[    2.178089][    T1] raid6: .... xor() 220 MB/s, rmw enabled
[    2.183645][    T1] raid6: using intx1 recovery algorithm
[    2.189813][    T1] vgaarb: loaded
[    2.193744][    T1] SCSI subsystem initialized
[    2.210821][    T1] usbcore: registered new interface driver usbfs
[    2.217017][    T1] usbcore: registered new interface driver hub
[    2.223141][    T1] usbcore: registered new device driver usb
[    2.229512][    T1] mc: Linux media interface: v0.10
[    2.234537][    T1] videodev: Linux video capture interface: v2.00
[    2.240974][    T1] pps_core: LinuxPPS API ver. 1 registered
[    2.246612][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.256467][    T1] PTP clock support registered
[    2.262485][    T1] clocksource: Switched to clocksource arm_global_timer
[    3.133488][    T1] *** VALIDATE bpf ***
[    3.137576][    T1] VFS: Disk quotas dquot_6.6.0
[    3.142243][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.149959][    T1] *** VALIDATE ramfs ***
[    3.162939][    T1] NET: Registered protocol family 2
[    3.168422][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    3.177472][    T1] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.185922][    T1] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    3.193783][    T1] TCP: Hash tables configured (established 4096 bind 4096)
[    3.200904][    T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.208136][    T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.215911][    T1] NET: Registered protocol family 1
[    3.221346][    T1] RPC: Registered named UNIX socket transport module.
[    3.227958][    T1] RPC: Registered udp transport module.
[    3.233361][    T1] RPC: Registered tcp transport module.
[    3.238738][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.245861][    T1] PCI: CLS 0 bytes, default 64
[    3.250617][    T1] Trying to unpack rootfs image as initramfs...
[    3.634537][    T1] Freeing initrd memory: 9636K
[    3.639294][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
[    3.646951][    T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    3.667545][    T1] Initialise system trusted keyrings
[    3.672719][    T1] Key type blacklist registered
[    3.677499][    T1] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    3.684728][    T1] zbud: loaded
[    3.688715][    T1] *** VALIDATE nfs ***
[    3.692683][    T1] *** VALIDATE nfs4 ***
[    3.696714][    T1] NFS: Registering the id_resolver key type
[    3.702446][    T1] Key type id_resolver registered
[    3.707337][    T1] Key type id_legacy registered
[    3.712030][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.719436][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.726730][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    3.734661][    T1] *** VALIDATE jffs2 ***
[    3.739056][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    3.746295][    T1] orangefs_init: module version upstream loaded
[    3.776391][    T1] async_tx: api initialized (async)
[    3.781431][    T1] Key type asymmetric registered
[    3.786247][    T1] Asymmetric key parser 'x509' registered
[    3.791896][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    3.802008][    T1] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[    3.812631][    T1] mv_xor f1060800.xor: Marvell shared XOR driver
[    3.873049][    T1] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    3.882765][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
[    3.943049][    T1] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[    4.007090][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.015803][    T1] printk: console [ttyS0] disabled
[    4.040858][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 12500000) is a 16550A
[    4.050528][    T1] printk: console [ttyS0] enabled
[    4.050528][    T1] printk: console [ttyS0] enabled
[    4.060345][    T1] printk: bootconsole [earlycon0] disabled
[    4.060345][    T1] printk: bootconsole [earlycon0] disabled
[    4.092685][    T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 12500000) is a 16550A
[    4.103764][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply ahci not found, using dummy regulator
[    4.113390][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply phy not found, using dummy regulator
[    4.122896][    T1] ahci-mvebu f10a8000.sata: f10a8000.sata supply target not found, using dummy regulator
[    4.132712][    T1] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    4.142527][    T1] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.153020][    T1] scsi host0: ahci-mvebu
[    4.157564][    T1] scsi host1: ahci-mvebu
[    4.161948][    T1] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 44
[    4.170625][    T1] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 44
[    4.180278][    T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
[    4.187410][    T1] nand: Hynix H27U2G8F2CTR-BC
[    4.191967][    T1] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    4.200694][    T1] Bad block table found at page 131008, version 0x01
[    4.207938][    T1] Bad block table found at page 130944, version 0x01
[    4.214883][    T1] 8 cmdlinepart partitions found on MTD device pxa3xx_nand-0
[    4.222145][    T1] Creating 8 MTD partitions on "pxa3xx_nand-0":
[    4.228302][    T1] 0x000000000000-0x000000500000 : "u-boot"
[    4.234845][    T1] 0x000000500000-0x000000a00000 : "kernel"
[    4.241274][    T1] 0x000000a00000-0x000000f00000 : "uRamdisk"
[    4.247911][    T1] 0x000000f00000-0x00000c800000 : "image.cfs"
[    4.255001][    T1] 0x00000c800000-0x00000d700000 : "rescue_fw"
[    4.261706][    T1] 0x00000d700000-0x00000eb00000 : "config"
[    4.268198][    T1] 0x00000eb00000-0x00000f500000 : "reserve1"
[    4.274833][    T1] 0x00000f500000-0x00000ff00000 : "reserve2"
[    4.281928][    T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    4.290518][    T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    4.301712][    T1] libphy: Fixed MDIO Bus: probed
[    4.307252][    T1] libphy: orion_mdio_bus: probed
[    4.315549][    T1] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[    4.327339][    T1] mvneta f1034000.ethernet eth0: Using random mac address d6:1d:bb:b2:65:4c
[    4.336260][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.343566][    T1] ehci-pci: EHCI PCI platform driver
[    4.348795][    T1] ehci-orion: EHCI orion driver
[    4.353695][    T1] orion-ehci f1058000.usb: EHCI Host Controller
[    4.359838][    T1] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[    4.368248][    T1] orion-ehci f1058000.usb: irq 40, io mem 0xf1058000
[    4.402500][    T1] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[    4.409312][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.418339][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.426309][    T1] usb usb1: Product: EHCI Host Controller
[    4.431912][    T1] usb usb1: Manufacturer: Linux 5.6.9-mvebu-tld-1 ehci_hcd
[    4.439005][    T1] usb usb1: SerialNumber: f1058000.usb
[    4.444736][    T1] hub 1-0:1.0: USB hub found
[    4.449229][    T1] hub 1-0:1.0: 1 port detected
[    4.454803][    T1] usbcore: registered new interface driver usblp
[    4.461067][    T1] usbcore: registered new interface driver usb-storage
[    4.468040][    T1] mousedev: PS/2 mouse device common for all mice
[    4.475279][    T1] armada38x-rtc f10a3800.rtc: registered as rtc0
[    4.481716][    T1] i2c /dev entries driver
[    4.488639][    T1] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
[    4.497672][    T1] watchdog: f1020300.watchdog: falling back to default timeout (171)
[    4.503804][ T1249] ata2: SATA link down (SStatus 0 SControl 300)
[    4.505889][    T1] orion_wdt: Initial timeout 171 sec
[    4.516932][ T1245] ata1: SATA link down (SStatus 0 SControl 300)
[    4.523433][    T1] device-mapper: uevent: version 1.0.3
[    4.528913][    T1] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    4.538314][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
[    4.545606][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
[    4.552963][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
[    4.560339][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
[    4.567322][    T1] device-mapper: raid: Loading target version 1.15.1
[    4.601929][    T1] marvell-cesa f1090000.crypto: CESA device successfully registered
[    4.610191][    T1] hid: raw HID events driver (C) Jiri Kosina
[    4.616481][    T1] usbcore: registered new interface driver usbhid
[    4.622829][    T1] usbhid: USB HID core driver
[    4.627385][    T1] exFAT: Version 1.3.0
[    4.631750][    T1] drop_monitor: Initializing network drop monitor service
[    4.639090][    T1] NET: Registered protocol family 10
[    4.644996][    T1] Segment Routing with IPv6
[    4.649429][    T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.657210][    T1] NET: Registered protocol family 17
[    4.662531][    T1] 8021q: 802.1Q VLAN Support v1.8
[    4.667473][    T1] Key type dns_resolver registered
[    4.672656][    T1] ThumbEE CPU extension supported.
[    4.677651][    T1] Registering SWP/SWPB emulation handler
[    4.683402][    T1] registered taskstats version 1
[    4.688220][    T1] Loading compiled-in X.509 certificates
[    4.693836][    T1] zswap: loaded using pool lzo/zbud
[    4.699095][    T1] Key type ._fscrypt registered
[    4.703856][    T1] Key type .fscrypt registered
[    4.708498][    T1] Key type fscrypt-provisioning registered
[    4.728453][    T1] Key type big_key registered
[    4.739555][    T1] Key type encrypted registered
[    4.746925][   T23] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.753044][   T23] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
[    4.761355][   T23] xhci-hcd f10f0000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    4.771393][   T23] xhci-hcd f10f0000.usb3: irq 46, io mem 0xf10f0000
[    4.778130][   T23] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.787153][   T23] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.795144][   T23] usb usb2: Product: xHCI Host Controller
[    4.800747][   T23] usb usb2: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.807845][   T23] usb usb2: SerialNumber: f10f0000.usb3
[    4.813666][   T23] hub 2-0:1.0: USB hub found
[    4.818160][   T23] hub 2-0:1.0: 1 port detected
[    4.823040][   T23] xhci-hcd f10f0000.usb3: xHCI Host Controller
[    4.829088][   T23] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 3
[    4.837356][   T23] xhci-hcd f10f0000.usb3: Host supports USB 3.0 SuperSpeed
[    4.844506][   T23] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.853448][   T23] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    4.862457][   T23] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.870428][   T23] usb usb3: Product: xHCI Host Controller
[    4.876053][   T23] usb usb3: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.883148][   T23] usb usb3: SerialNumber: f10f0000.usb3
[    4.888908][   T23] hub 3-0:1.0: USB hub found
[    4.893430][   T23] hub 3-0:1.0: 1 port detected
[    4.898531][   T23] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    4.904600][   T23] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
[    4.912927][   T23] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[    4.922943][   T23] xhci-hcd f10f8000.usb3: irq 47, io mem 0xf10f8000
[    4.929640][   T23] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[    4.938679][   T23] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.946648][   T23] usb usb4: Product: xHCI Host Controller
[    4.952251][   T23] usb usb4: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    4.959357][   T23] usb usb4: SerialNumber: f10f8000.usb3
[    4.965135][   T23] hub 4-0:1.0: USB hub found
[    4.969626][   T23] hub 4-0:1.0: 1 port detected
[    4.974509][   T23] xhci-hcd f10f8000.usb3: xHCI Host Controller
[    4.980557][   T23] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 5
[    4.988806][   T23] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[    4.995957][   T23] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.004891][   T23] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[    5.013910][   T23] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.021871][   T23] usb usb5: Product: xHCI Host Controller
[    5.027481][   T23] usb usb5: Manufacturer: Linux 5.6.9-mvebu-tld-1 xhci-hcd
[    5.034575][   T23] usb usb5: SerialNumber: f10f8000.usb3
[    5.040319][   T23] hub 5-0:1.0: USB hub found
[    5.044823][   T23] hub 5-0:1.0: 1 port detected
[    5.050311][    T1] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    5.058332][    T1] armada38x-rtc f10a3800.rtc: setting system clock to 2020-06-30T05:13:32 UTC (1593494012)
[    5.070597][    T1] Freeing unused kernel memory: 1024K
[    5.102963][    T1] Checked W+X mappings: passed, no W+X pages found
[    5.109354][    T1] Run /init as init process
Loading, please wait...
starting version 232
[    5.170012][ T1555] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.178367][ T1555] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.178415][ T1556] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.322530][   T23] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[    5.506912][   T23] usb 2-1: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.51
[    5.522367][   T23] usb 2-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    5.530285][   T23] usb 2-1: Product: USB Storage
[    5.535027][   T23] usb 2-1: Manufacturer: Generic
[    5.539932][   T23] usb 2-1: SerialNumber: 000000009451
[    5.546263][   T23] usb-storage 2-1:1.0: USB Mass Storage device detected
[    5.563356][   T23] usb-storage 2-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    5.570970][   T23] scsi host2: usb-storage 2-1:1.0
[    5.945171][ T1574] usbcore: registered new interface driver uas
[    6.593814][   T36] scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    6.739794][   T20] sd 2:0:0:0: [sda] 7959552 512-byte logical blocks: (4.08 GB/3.79 GiB)
[    6.748779][   T20] sd 2:0:0:0: [sda] Write Protect is off
[    6.755068][   T20] sd 2:0:0:0: [sda] No Caching mode page found
[    6.761110][   T20] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    6.773367][   T20]  sda: sda1
[    6.779012][   T20] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    6.875423][    C0] random: fast init done
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [   18.073934][ T1606] Btrfs loaded, crc32c=crc32c-generic
Scanning for Btrfs filesystems
done.
[   18.658598][ T1624] process '/bin/fstype' started with executable stack
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 68456/248992 files, 659315/994560 blocks
done.
[   18.861781][ T1635] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   18.903395][ T1635] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   19.643702][    T1] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   19.662815][    T1] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 9 (stretch)!

here is nano /etc/fw_env.config

root@mario:~# nano /etc/fw_env.config
  GNU nano 2.7.4               File: /etc/fw_env.config

# MTD device name       Device offset   Env. size       Flash sector size      $

#/dev/mtd1              0x0000          0x80000         0x20000                $
/dev/mtd0 0x00080000 0x20000 0x20000


root@mario:~# fw_printenv
Warning: Bad CRC, using default environment
bootargs=
bootcmd=
bootdelay=2
baudrate=115200
arch=sandbox
cpu=sandbox
board=sandbox
board_name=sandbox
stdin=serial,cros-ec-keyb,usbkbd
stdout=serial,vidconsole
stderr=serial,vidconsole
ethaddr=00:00:11:22:33:44
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ipaddr=1.2.3.4
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
boot_net_pci_enum=pci enum
boot_net_usb_start=usb start
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=host1 host0
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_host1=setenv devnum 1; run host_boot
bootcmd_host0=setenv devnum 0; run host_boot
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
bootm_size=0x10000000
kernel_addr_r=0x1000000
fdt_addr_r=0xc00000
ramdisk_addr_r=0x2000000
scriptaddr=0x1000
pxefile_addr_r=0x2000
root@mario:~#

mcmg2
Re: Debian on WD MyCloud EX2 Ultra
June 30, 2020 01:53AM
from the post, https://forum.doozan.com/read.php?2,28939,98649#msg-98649

I changed /etc/fw_env.config

/dev/mtd0 0x100000 0x80000 0x20000 4

and here is the output

root@mario:~# fw_printenv
CASset=max
MALLOC_len=5
MPmode=SMP
autoload=no
baudrate=115200
boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr
bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial
bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel
bootargs_end=:10.4.50.254:255.255.255.0:Armada38x:eth0:none
bootargs_root=root=/dev/nfs rw
bootcmd=run bootcmd_usb; run bootcmd_stock; reset
bootcmd_auto=stage_boot $boot_order
bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr;
bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot
bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000;
bootcmd_stock=echo Booting from stock ... ; run set_bootargs_stock; printenv bootargs; nand read.e 0xa00000 0x500000 0x500000;nand read.e 0xf00000 0xa00000 0x500000;bootm 0xa00000 0xf00000
bootcmd_usb=echo Booting from USB ...; usb start; setenv fdt_skip_update yes; usb start; run usb_set_bootargs; if run load_image; then if run load_initrd; then bootm $load_image_addr $load_initrd_addr; else bootm $load_image_addr; fi; fi
bootdelay=1
bootdev=usb
cacheShare=no
console=console=ttyS0,115200
device=0:1
device_partition=0:1
disaMvPnp=no
eeeEnable=no
enaClockGating=no
enaCpuStream=no
enaFPU=yes
enaMonExt=no
enaWrAllo=no
eth1addr=00:50:43:20:21:3e
eth1mtu=1500
eth2addr=00:50:43:20:f2:3e
eth2mtu=1500
eth3addr=00:50:43:21:f2:20
eth3mtu=1500
ethact=egiga2
ethaddr=00:50:43:f2:21:3e
ethmtu=1500
ethprime=egiga2
fdt_addr=2040000
fdt_skip_update=yes
fdtaddr=0x1000000
fdtfile=armada-38x-modular.dtb
filesize=12
ide_path=/
image_name=uImage
initrd_name=uInitrd
ipaddr=192.168.11.110
kernel_addr_r=2080000
lcd0_enable=0
lcd0_params=640x480-16@60
lcd_panel=0
load_image=echo loading Image ...; ext2load $bootdev $device $load_image_addr /boot/uImage
load_image_addr=0x02000000
load_initrd=echo loading uInitrd ...; ext2load $bootdev $device $load_initrd_addr /boot/uInitrd
load_initrd_addr=0x2900000
loadaddr=0x02000000
loads_echo=0
mtddevname=u-boot
mtddevnum=0
mtdids=nand0=armada-nand
mtdparts=mtdparts=armada-nand:5m(u-boot)ro,5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500
mv_pon_addr=00:50:43:3e:f2:20
nandEcc=nfcConfig=4bitecc
netbsd_en=no
netmask=255.255.255.0
netretry=no
partition=nand0,0
pcieTune=no
pexMode=RC
pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm
pxefile_addr_r=3100000
ramdisk_addr_r=2880000
rootpath=/srv/nfs/
sata_delay_reset=0
sata_dma_mode=yes
script_addr_r=3000000
script_name=boot.scr
serverip=192.168.11.114
set_bootargs_stock=setenv bootargs root=/dev/ram console=ttyS0,115200
standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000;
stderr=serial
stdin=serial
stdout=serial
usb0Mode=host
usbActive=0
usbType=3
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial mtdparts=armada-nand:5m@0(u-boot),5m@5m(kernel),5m@10m(uRamdisk),185m@15m(image.cfs),15m@200m(rescue_fw),20m@215m(config),10m@235m(reserve1),10m@245m(reserve2)
vxworks_en=no
yuk_ethaddr=00:00:00:EE:51:81
root@mario:~#

Re: Debian on WD MyCloud EX2 Ultra
June 30, 2020 05:02AM
mcmg2,

> I changed /etc/fw_env.config
>
>
> /dev/mtd0 0x100000 0x80000 0x20000 4
>

Very good! so the location is actually at 0x100000 on this box.

-bodhi
===========================
Forum Wiki
bodhi's corner
Aoliv
Re: Debian on WD MyCloud EX2 Ultra
July 17, 2020 01:20PM
First I would like to thank you all to the nice work you are doing in port Debian in different NAS devices.

Can some one point me to an installing guide to WD Mycloud Ex2 Ultra? If it possible I would like to boot from an USB with Debian installed. I also woul like to know if there are any bugs or missing features.

Again, thank you all.
Re: Debian on WD MyCloud EX2 Ultra
July 17, 2020 03:58PM
Aoliv,

> Can some one point me to an installing guide to WD
> Mycloud Ex2 Ultra? If it possible I would like to
> boot from an USB with Debian installed. I also
> woul like to know if there are any bugs or missing
> features.
>

We don't have an "official" guide written up for this box. The first step is to create the rootfs: Debian-5.2.9-mvebu-tld-1-rootfs-bodhi.tar.bz2. And then follow the steps written in some post on this thread.

It is best that you have serial console so you don't need to commit anything to flash, until it is all working well.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Debian on WD MyCloud EX2 Ultra
August 02, 2020 05:01AM
bodhi Wrote:
-------------------------------------------------------
> mcmg2,
>
> > I changed /etc/fw_env.config
> >
> >
> > /dev/mtd0 0x100000 0x80000 0x20000 4
> >
>
> Very good! so the location is actually at 0x100000
> on this box.


Please, note that this address is valid only for the patched uboot.
As explained in my post, the stock address is overlapping with the uImage partition, so it isn't usable



Edited 1 time(s). Last edit at 08/02/2020 08:15AM by CyberPK.
Re: Debian on WD MyCloud EX2 Ultra
August 02, 2020 08:48PM
CyberPK Wrote:
-------------------------------------------------------
> bodhi Wrote:
> -------------------------------------------------------
> > mcmg2,
> >
> > > I changed /etc/fw_env.config
> > >
> > >
> > > /dev/mtd0 0x100000 0x80000 0x20000 4
> > >
> >
> > Very good! so the location is actually at
> 0x100000
> > on this box.
>
>
> Please, note that this address is valid only for
> the patched uboot.
> As explained in my post, the stock address is
> overlapping with the uImage partition, so it isn't
> usable

Thanks for pointing out that fact!

-bodhi
===========================
Forum Wiki
bodhi's corner
Aoliv
Re: Debian on WD MyCloud EX2 Ultra
August 12, 2020 01:13PM
Hi Bodhi,

Can you help me with the serial console? I will need to weld the connections on the board or there is an easier way?

Thanks
Re: Debian on WD MyCloud EX2 Ultra
August 13, 2020 01:25AM
Aoliv,


> Can you help me with the serial console? I will
> need to weld the connections on the board or there
> is an easier way?

I don't have this box. I build the kernel based on what users in this thread reported what its characteristics are.

Hope others in this thread can help you. If nobody steps up after a few days, then you need to take a picture of the board so I can take a look what it looks like. I might have some suggestion that could help you avoid soldering.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Debian on WD MyCloud EX2 Ultra
August 13, 2020 04:08AM
Doing a web search I come up with these two sites that may help with the serial connection:

https://community.wd.com/t/bricked-my-ex2-also-how-i-unbricked-it/98660
https://www.eteknix.com/western-digital-ex2-2-bay-8tb-my-cloud-nas-review/2/

If they show the correct unit it looks like the header is already installed. I don't know if there's a difference between the EX2 and the EX2 Ultra.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: