Re: Pogoplug E04 not booting from SD Card or USB January 16, 2021 09:12PM |
Registered: 6 years ago Posts: 35 |
root@debian:/boot# fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage mainlineLinux=yes mtdids=nand0=orion_nand partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=3960 machid=f78 ethaddr=00:25:31:05:f5:25 mtdparts=mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) dtb_file=/boot/dts/kirkwood-pogoplug_v4.dtb ipaddr=10.0.1.231 serverip=10.0.1.220 root@debian:/boot#If all looks good, then I think I am good to reboot
Re: Pogoplug E04 not booting from SD Card or USB January 17, 2021 02:59PM |
Registered: 6 years ago Posts: 35 |
Re: Pogoplug E04 not booting from SD Card or USB January 17, 2021 03:43PM |
Admin Registered: 13 years ago Posts: 19,010 |
Quote
If all looks good, then I think I am good to reboot
Quote
Assuming all goes well, does that mean I should stay on version 5.2.9, or would I be free to upgrade to the latest 5.9.12? I'm not planning to get too far ahead of myself, just curious as to the limitations with the current hardware and u-boot and also a little confused on the opening post statement in Linux Kernel 5.9.12 Kirkwood package and Debian rootfs since uname, proc/version and dmesg all show 5.2.9 for the kernel so I'm unsure what the 5.9.12 latest kernel if referring to
Re: Pogoplug E04 not booting from SD Card or USB January 17, 2021 04:01PM |
Registered: 6 years ago Posts: 35 |
Re: Pogoplug E04 not booting from SD Card or USB January 17, 2021 04:28PM |
Admin Registered: 13 years ago Posts: 19,010 |
Quote
I see the pogo options are gone from the boot cmd, so does that mean it will not boot at all without anything plugged in?