|
NSA325v1 broken flash April 20, 2021 04:12AM |
Registered: 8 years ago Posts: 22 |
root@debian:/etc# cat fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000 root@debian:/etc#
root@debian:~# fw_setenv baudrate=115200 Warning: Bad CRC, using default environment Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash root@debian:~#
login as: root
root@192.168.10.79's password:
Linux debian 4.4.213-1-ARCH #1 PREEMPT Fri Feb 7 05:49:05 UTC 2020 armv5tel
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Apr 20 00:12:34 2021 from 192.168.10.32
root@debian:~# fw_printenv
Warning: Bad CRC, using default environment
bootcmd=run distro_bootcmd
bootdelay=2
baudrate=115200
stdin=serial,cros-ec-keyb,usbkbd
stdout=serial,vidconsole
stderr=serial,vidconsole
ethaddr=00:00:11:22:33:44
eth1addr=00:00:11:22:33:45
eth3addr=00:00:11:22:33:46
eth5addr=00:00:11:22:33:47
ipaddr=1.2.3.4
host_boot=if host dev ${devnum}; then setenv devtype host; run scan_dev_for_boot_part; fi
sata_boot=if sata dev ${devnum}; then setenv devtype sata; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then setenv scsi_need_init false; scsi scan; fi
scsi_boot=run scsi_init; if scsi dev ${devnum}; then setenv devtype scsi; run scan_dev_for_boot_part; fi
virtio_boot=if virtio dev ${devnum}; then setenv devtype virtio; run scan_dev_for_boot_part; fi
boot_prefixes=/ /boot/
boot_scripts=boot.scr.uimg boot.scr
boot_script_dhcp=boot.scr.uimg
boot_targets=host1 host0
boot_syslinux_conf=extlinux/extlinux.conf
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
bootcmd_host1=setenv devnum 1; run host_boot
bootcmd_host0=setenv devnum 0; run host_boot
distro_bootcmd=setenv scsi_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done
bootm_size=0x10000000
kernel_addr_r=0x1000000
fdt_addr_r=0xc00000
ramdisk_addr_r=0x2000000
scriptaddr=0x1000
pxefile_addr_r=0x2000
root@debian:~#
root@debian:/etc# /usr/sbin/flash_erase /dev/mtd0 0xc0000 1
flash_erase: error!: /dev/mtd0
error 13 (Permission denied)
root@debian:/etc# nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.envirnoment.img
nandwrite: error!: /dev/mtd0
error 13 (Permission denied)
root@debian:/etc#
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.04.20 10:53:43 =~=~=~=~=~=~=~=~=~=~=~=
ü
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Sep 16 2011 - 17:51:53) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFF00
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 10M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (10M - 7M): Done
NAND:128 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Kernel address is 0x4640000.
Streaming disabled
Write allocate disabled
USB 0: host mode
[BlueDBG] reseting SoC Pex[0] 0 ...
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
[BlueDBG] reseting SoC Pex[1] 0 ...
[BlueDBG] reseting SoC Pex[1] 1 ...
[BlueDBG] reseting SoC Pex[1] 2 ...
[BlueDBG] reseting SoC Pex[1] 3 ...
[BlueDBG] reseting SoC Pex[1] 4 ...
[BlueDBG] reseting SoC Pex[1] 5 ...
[BlueDBG] reseting SoC Pex[1] 6 ...
[BlueDBG] reseting SoC Pex[1] 7 ...
[BlueDBG] reseting SoC Pex[1] 8 ...
[BlueDBG] reseting SoC Pex[1] 9 ...
[BlueDBG] reseting SoC Pex[1] 10 ...
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 2 1 0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
.....................................
4622488 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
....................................................................................................................................................................................................................................................................................................................................................................................................................
....
............................................................................................................................
9713936 bytes read
## Booting image at 02000000 ...
Image Name: Linux-4.4.213-1-ARCH
Created: 2020-02-07 5:33:25 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4622424 Bytes = 4.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 01100000 ...
Image Name: Ramdisk armhf
Created: 2021-04-17 12:33:06 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 9713872 Bytes = 9.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.213-1-ARCH (builduser@leming) (gcc version 9.2.0 (GCC) ) #1 PREEMPT Fri Feb 7 05:49:05 UTC 2020
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: ZyXEL NSA325 2-Bay Power Media Server
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0920d84, node_mem_map dfb7a000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=LABEL=rootfs loglevel=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 499640K/524288K available (6614K kernel code, 548K rwdata, 1892K rodata, 300K init, 720K bss, 24648K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0856bbc (8507 kB)
[ 0.000000] .init : 0xc0857000 - 0xc08a2000 ( 300 kB)
[ 0.000000] .data : 0xc08a2000 - 0xc092b29c ( 549 kB)
[ 0.000000] .bss : 0xc092b29c - 0xc09df428 ( 721 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:114
[ 0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 18.188526] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 18.188674] Console: colour dummy device 80x30
[ 18.188694] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 18.228576] pid_max: default: 32768 minimum: 301
[ 18.228643] Security Framework initialized
[ 18.228704] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 18.228717] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 18.229271] Initializing cgroup subsys io
[ 18.229295] Initializing cgroup subsys memory
[ 18.229335] Initializing cgroup subsys devices
[ 18.229355] Initializing cgroup subsys freezer
[ 18.229371] Initializing cgroup subsys net_cls
[ 18.229386] Initializing cgroup subsys perf_event
[ 18.229401] Initializing cgroup subsys net_prio
[ 18.229462] CPU: Testing write buffer coherency: ok
[ 18.229805] Setting up static identity map for 0x81e0 - 0x8238
[ 18.231293] devtmpfs: initialized
[ 18.233032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 18.233059] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 18.233427] pinctrl core: initialized pinctrl subsystem
[ 18.233991] NET: Registered protocol family 16
[ 18.234334] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 18.258592] cpuidle: using governor ladder
[ 18.288589] cpuidle: using governor menu
[ 18.288704] Kirkwood: MV88F6282-Rev-A1, TCLK=200000000.
[ 18.288723] Feroceon L2: Enabling L2
[ 18.288750] Feroceon L2: Cache support initialised.
[ 18.289297] initial MPP regs: 21111111 01103311 00051100 00000000 00000000 00000000 00000000
[ 18.289319] final MPP regs: 21111111 00003311 00051100 00000000 00000000 00000000 00000000
[ 18.290444] Kirkwood PCIe port 0: link up
[ 18.290451] PCI: bus0 uses PCIe port 0
[ 18.290623] PCI host bridge to bus 0000:00
[ 18.290636] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 18.290645] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 18.290653] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 18.290676] pci 0000:00:00.0: [11ab:6282] type 00 class 0x058000
[ 18.290701] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 18.290713] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[ 18.290752] pci 0000:00:00.0: supports D1 D2
[ 18.290923] pci 0000:00:01.0: [1033:0194] type 00 class 0x0c0330
[ 18.290977] pci 0000:00:01.0: reg 0x10: [mem 0x90000000-0x90001fff 64bit]
[ 18.291091] pci 0000:00:01.0: PME# supported from D0 D3hot
[ 18.291291] PCI: bus0: Fast back to back transfers disabled
[ 18.291303] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 18.291326] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit]
[ 18.319750] vgaarb: loaded
[ 18.319997] SCSI subsystem initialized
[ 18.320145] libata version 3.00 loaded.
[ 18.320383] usbcore: registered new interface driver usbfs
[ 18.320445] usbcore: registered new interface driver hub
[ 18.320490] usbcore: registered new device driver usb
[ 18.320614] pps_core: LinuxPPS API ver. 1 registered
[ 18.320621] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 18.320644] PTP clock support registered
[ 18.321435] clocksource: Switched to clocksource orion_clocksource
[ 18.351418] FS-Cache: Loaded
[ 18.361148] NET: Registered protocol family 2
[ 18.361817] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.361872] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 18.361921] TCP: Hash tables configured (established 4096 bind 4096)
[ 18.361975] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 18.361995] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 18.362154] NET: Registered protocol family 1
[ 18.362416] RPC: Registered named UNIX socket transport module.
[ 18.362424] RPC: Registered udp transport module.
[ 18.362429] RPC: Registered tcp transport module.
[ 18.362434] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.362523] PCI: CLS 32 bytes, default 32
[ 18.362755] Trying to unpack rootfs image as initramfs...
[ 18.921824] Freeing initrd memory: 9488K
[ 18.932804] VFS: Disk quotas dquot_6.6.0
[ 18.933016] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.934573] FS-Cache: Netfs 'nfs' registered for caching
[ 18.935434] NFS: Registering the id_resolver key type
[ 18.935476] Key type id_resolver registered
[ 18.935482] Key type id_legacy registered
[ 18.935551] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 18.936515] fuse init (API version 7.23)
[ 18.938102] aufs 4.4-20170911
[ 18.942235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 18.942250] io scheduler noop registered
[ 18.942259] io scheduler deadline registered
[ 18.942469] io scheduler cfq registered
[ 18.942665] io scheduler bfq registered (default)
[ 18.942671] BFQ I/O-scheduler: v7r11
[ 18.942841] mv_xor mv_xor.0: Marvell shared XOR driver
[ 18.982278] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[ 18.982465] mv_xor mv_xor.1: Marvell shared XOR driver
[ 19.022287] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[ 19.026520] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 19.027309] console [ttyS0] disabled
[ 19.047375] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 19.776954] console [ttyS0] enabled
[ 19.792104] brd: module loaded
[ 19.800793] loop: module loaded
[ 19.804257] sata_mv sata_mv.0: version 1.28
[ 19.808502] sata_mv sata_mv.0: cannot get optional clkdev
[ 19.814077] sata_mv sata_mv.0: slots 32 ports 2
[ 19.820997] scsi host0: sata_mv
[ 19.824596] scsi host1: sata_mv
[ 19.827997] ata1: SATA max UDMA/133 irq 21
[ 19.832142] ata2: SATA max UDMA/133 irq 21
[ 19.836862] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 19.843439] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 19.848077] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 19.855705] Scanning device for bad blocks
[ 19.862267] Bad eraseblock 21 at 0x0000002a0000
[ 19.867885] Bad eraseblock 31 at 0x0000003e0000
[ 19.874526] Bad eraseblock 50 at 0x000000640000
[ 19.880257] Bad eraseblock 61 at 0x0000007a0000
[ 19.887460] Bad eraseblock 85 at 0x000000aa0000
[ 19.892411] Bad eraseblock 89 at 0x000000b20000
[ 19.927548] Bad eraseblock 361 at 0x000002d20000
[ 19.955900] Bad eraseblock 572 at 0x000004780000
[ 19.986852] Bad eraseblock 806 at 0x0000064c0000
[ 20.026410] Creating 9 MTD partitions on "orion_nand":
[ 20.031641] 0x000000000000-0x000000100000 : "uboot"
[ 20.036946] 0x000000100000-0x000000180000 : "uboot_env"
[ 20.042578] 0x000000180000-0x000000200000 : "key_store"
[ 20.048153] 0x000000200000-0x000000280000 : "info"
[ 20.053368] 0x000000280000-0x000000c80000 : "etc"
[ 20.058434] 0x000000c80000-0x000001680000 : "kernel_1"
[ 20.063976] 0x000001680000-0x000004640000 : "rootfs1"
[ 20.069433] 0x000004640000-0x000005040000 : "kernel_2"
[ 20.074993] 0x000005040000-0x000008000000 : "rootfs2"
[ 20.096359] libphy: orion_mdio_bus: probed
[ 20.100564] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 20.110109] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address fc:f5:28:0d:b2:15
[ 20.119044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.125639] ehci-pci: EHCI PCI platform driver
[ 20.130153] ehci-orion: EHCI orion driver
[ 20.134276] orion-ehci orion-ehci.0: EHCI Host Controller
[ 20.139717] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 20.147465] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 20.171463] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 20.178117] hub 1-0:1.0: USB hub found
[ 20.181945] hub 1-0:1.0: 1 port detected
[ 20.186367] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 20.191675] ata1: SATA link down (SStatus 0 SControl F300)
[ 20.197232] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 20.204973] xhci_hcd 0000:00:01.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
[ 20.214192] hub 2-0:1.0: USB hub found
[ 20.217988] hub 2-0:1.0: 2 ports detected
[ 20.222512] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 20.227771] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 20.235307] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 20.244118] hub 3-0:1.0: USB hub found
[ 20.247910] hub 3-0:1.0: 2 ports detected
[ 20.252558] usbcore: registered new interface driver uas
[ 20.258009] usbcore: registered new interface driver usb-storage
[ 20.264129] usbcore: registered new interface driver ums-alauda
[ 20.270114] usbcore: registered new interface driver ums-cypress
[ 20.276214] usbcore: registered new interface driver ums-datafab
[ 20.282364] usbcore: registered new interface driver ums_eneub6250
[ 20.288607] usbcore: registered new interface driver ums-freecom
[ 20.294695] usbcore: registered new interface driver ums-isd200
[ 20.300675] usbcore: registered new interface driver ums-jumpshot
[ 20.306849] usbcore: registered new interface driver ums-karma
[ 20.312760] usbcore: registered new interface driver ums-onetouch
[ 20.318935] usbcore: registered new interface driver ums-realtek
[ 20.325129] usbcore: registered new interface driver ums-sddr09
[ 20.331119] usbcore: registered new interface driver ums-sddr55
[ 20.337124] usbcore: registered new interface driver ums-usbat
[ 20.343333] mousedev: PS/2 mouse device common for all mice
[ 20.501460] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 20.561462] ata2: SATA link down (SStatus 0 SControl F300)
[ 20.653789] hub 1-1:1.0: USB hub found
[ 20.657849] hub 1-1:1.0: 4 ports detected
[ 20.941452] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
[ 21.230544] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 21.237114] scsi host2: usb-storage 1-1.2:1.0
[ 21.351456] rtc-mv rtc-mv: internal RTC not ticking
[ 21.356468] i2c /dev entries driver
[ 21.360803] sdhci: Secure Digital Host Controller Interface driver
[ 21.367034] sdhci: Copyright(c) Pierre Ossman
[ 21.371467] sdhci-pltfm: SDHCI platform and OF driver helper
[ 21.377192] orion_gpio_is_valid: invalid GPIO 12
[ 21.382903] ledtrig-cpu: registered to indicate activity on CPUs
[ 21.389048] usbcore: registered new interface driver r8712u
[ 21.394853] gre: GRE over IPv4 demultiplexor driver
[ 21.399779] NET: Registered protocol family 17
[ 21.404357] Key type dns_resolver registered
[ 21.409421] registered taskstats version 1
[ 21.452003] Key type encrypted registered
[ 21.456557] console [netcon0] enabled
[ 21.460237] netconsole: network logging started
[ 21.465238] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 21.472289] hctosys: unable to open rtc device (rtc0)
[ 21.479061] Freeing unused kernel memory: 300K
Loading, please wait...
Starting version 241
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Waiting for root file system ... [ 23.090807] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
[ 23.104269] sd 2:0:0:0: [sda] 15527936 512-byte logical blocks: (7.95 GB/7.40 GiB)
[ 23.117216] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 23.124775] sd 2:0:0:0: [sda] Write Protect is off
[ 23.129606] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 23.135502] sd 2:0:0:0: [sda] No Caching mode page found
[ 23.140849] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 23.152420] sda: sda1
[ 23.163386] sd 2:0:0:0: [sda] Attached SCSI removable disk
Begin: Running /scripts/local-block ... done.
done.
Begin: Will now check root file system ... fsck from util-linux 2.33.1
[/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 15110/485760 files, 266598/1939968 blocks
done.
[ 37.443008] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 37.466570] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.93 booting
[[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S.
[....] Starting hotplug events dispatcher: systemd-udevd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Synthesizing the initial hotplug events (subsystems)...[ 39.118638] random: nonblocking pool is initialized
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Synthesizing the initial hotplug events (devices)...[ 39.590701] systemd-udevd[309]: Using default interface naming scheme 'v240'.
[ 39.720902] systemd-udevd[309]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Waiting for /dev to be fully populated...[ 40.095231] systemd-udevd[302]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Setting hostname to 'debian'...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Activating swap:[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[ 40.984645] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[[36minfo[39;49m] Will now check all file systems.
fsck from util-linux 2.33.1
Checking all file systems.
LABEL=rootfs is mounted
[....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Cleaning up temporary files...[....] Cleaning /tmp...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
/tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Will now mount local filesystems:[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Will now activate swapfile swap:[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Checking minimum space in /tmp...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting Setting kernel variables: sysctl[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Initializing random number generator...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
[ 43.685373] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
Listening on LPF/eth0/fc:f5:28:0d:b2:15
Sending on LPF/eth0/fc:f5:28:0d:b2:15
Sending on Socket/fallback
DHCPREQUEST for 192.168.10.79 on eth0 to 255.255.255.255 port 67
[ 45.346869] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
DHCPREQUEST for 192.168.10.79 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.10.79 from 192.168.10.1
invoke-rc.d: could not determine current runlevel
bound to 192.168.10.79 -- renewal in 327454 seconds.
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone.
[....] Starting RPC port mapper daemon: rpcbind[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting NFS common utilities: statd idmapd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
INIT: Entering runlevel: 2
[[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1275 (syslogd)
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1302 (klogd)
[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting NFS common utilities: statd idmapd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Not starting NFS kernel daemon: no exports. ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m
[....] Starting NTP server: ntpd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
[....] Running local boot scripts (/etc/rc.local)[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 10 debian ttyS0
debian login:
|
Re: NSA325v1 broken flash April 20, 2021 04:29AM |
Admin Registered: 14 years ago Posts: 19,927 |
|
Re: NSA325v1 broken flash May 03, 2021 01:19AM |
Registered: 8 years ago Posts: 22 |
Linux debian 4.4.252-1-ARCH #1 PREEMPT Tue Jan 19 03:15:48 UTC 2021 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sat May 1 15:59:08 2021 from buero-pc.fritz.box root@debian:~# fw_printenv bootdelay=2 baudrate=115200 loads_echo=0 ipaddr=10.4.52.165 serverip=10.4.52.7 rootpath=/srv/ubuntu netmask=255.255.255.0 nandEcc=1bit PRODUCT_NAME=NSA-325 FEATURE_BIT=00 VENDOR_NAME=MitraStar Technology Corp. ethaddr=FC:F5:28:0D:B2:15 arcNumber=4495 bootargs_stock=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(ub oot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC 0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init bootargs_linux=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(ub oot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC 0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=LABEL=rootfs loglevel=8 bootcmd_stock=setenv bootargs $(bootargs_stock); nand read.e $(loadaddr) $(kerne l_addr) 0xA00000; bootm $(loadadr) to_stock=setenv mainlineLinux no; setenv bootcmd \'run bootcmd_stock\'; saveenv; reset to_linux=setenv mainlineLinux yes; setenv bootcmd \'run bootcmd_linux\'; saveenv ; reset stdin=serial stdout=serial stderr=serial disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes ethprime=egiga0 netbsd_en=no vxworks_en=no bootargs_root=root=/dev/nfs rw bootargs_end=:::orion:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/m tdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x20 00000; ethmtu=1500 mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 yuk_ethaddr=00:00:00:EE:51:81 netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 image_multi=yes kernel_addr=0x4640000 ethact=egiga0 mainlineLinux=yes bootcmd='run bootcmd_linux' MODEL_ID=AE03 mtdparts=nand_mtd:0x100000,0x80000,0x80000,0x80000,0xA00000,0xA00000,0x2FC0000,0 xA00000,0x2FC0000 root=/dev/nfs rw init=/init bootcmd_linux=setenv bootargs $(bootargs_linux); mw.l f1010100 0020c000; usb res et; ext2load usb 0:1 $(loadaddr) /uImage; ext2load usb 0:1 0x01100000 /uInitrd; bootm $(loadaddr) 0x01100000
|
Re: NSA325v1 broken flash May 03, 2021 02:02AM |
Admin Registered: 14 years ago Posts: 19,927 |
Quote
You are running a Debian rootfs, but with Arch Linux ARM kernel! that will not work well
|
Re: NSA325v1 broken flash May 03, 2021 04:46AM |
Registered: 8 years ago Posts: 22 |
3 USB Device(s) found Waiting for storage device(s) to settle before scanning... 1 Storage Device(s) found . . ... ...... ............ . ........................ . ......................... ........................ . ......................... ......................... ......................... ........................ . ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ....................... 4444174 bytes read . . ... ...... ............ . ........................ . ......................... ........................ . ......................... ......................... ......................... ........................ . ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ......................... ........................ . ......................... ......................... ......................... ......................... 7352331 bytes read ## Booting image at 02000000 ... Image Name: Linux-4.20.6-kirkwood-tld-1 Created: 2021-05-03 9:34:42 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4444110 Bytes = 4.2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: Ramdisk Linux-4.20.6-kirkwood-tl Created: 2021-05-03 9:36:32 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7352267 Bytes = 7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel.
|
Re: NSA325v1 broken flash May 03, 2021 05:18PM |
Admin Registered: 14 years ago Posts: 19,927 |
Quote
setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial'
setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage'
setenv load_uinitrd 'ext2load usb 0:1 0x2100000 /boot/uInitrd'
setenv usb_boot 'mw 0x800000 0 1; run load_uimage; if run load_uinitrd; then bootm 0x800000 0x2100000; else bootm 0x800000; fi'
setenv usb_bootcmd 'run usb_set_bootargs; run usb_boot'
setenv bootcmd 'usb start; run usb_bootcmd; usb stop; reset'
|
Re: NSA325v1 broken flash May 05, 2021 07:27AM |
Registered: 8 years ago Posts: 22 |
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Sep 16 2011 - 17:51:53) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFF00
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 10M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (10M - 7M): Done
NAND:128 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Kernel address is 0x4640000.
Streaming disabled
Write allocate disabled
USB 0: host mode
[BlueDBG] reseting SoC Pex[0] 0 ...
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
[BlueDBG] reseting SoC Pex[1] 0 ...
[BlueDBG] reseting SoC Pex[1] 1 ...
[BlueDBG] reseting SoC Pex[1] 2 ...
[BlueDBG] reseting SoC Pex[1] 3 ...
[BlueDBG] reseting SoC Pex[1] 4 ...
[BlueDBG] reseting SoC Pex[1] 5 ...
[BlueDBG] reseting SoC Pex[1] 6 ...
[BlueDBG] reseting SoC Pex[1] 7 ...
[BlueDBG] reseting SoC Pex[1] 8 ...
[BlueDBG] reseting SoC Pex[1] 9 ...
[BlueDBG] reseting SoC Pex[1] 10 ...
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
....
.
...................
.........................
...................................................
......................................................................................................
...................................
2461416 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
.................................................................................................................................................................................................................
..............................................................................................................................................................................................................
6362802 bytes read
## Booting image at 02000000 ...
Image Name: Linux-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:27 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2461352 Bytes = 2.3 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
Image Name: initramfs-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:41 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6362738 Bytes = 6.1 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Tue Apr 1 22:54:58 PDT 2014
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: ZyXEL NSA325 2-Bay Power Media Server
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c06d7f18, node_mem_map dfbfb000
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=LABEL=rootfs loglevel=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 506088K/524288K available (4779K kernel code, 352K rwdata, 1644K rodata, 213K init, 424K bss, 18200K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc064df14 (6424 kB)
[ 0.000000] .init : 0xc064e000 - 0xc0683444 ( 214 kB)
[ 0.000000] .data : 0xc0684000 - 0xc06dc3c4 ( 353 kB)
[ 0.000000] .bss : 0xc06dc3c4 - 0xc074665c ( 425 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:114
[ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 19.994894] Console: colour dummy device 80x30
[ 19.994917] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 20.034703] pid_max: default: 32768 minimum: 301
[ 20.034788] Security Framework initialized
[ 20.034836] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.034851] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 20.035307] Initializing cgroup subsys devices
[ 20.035324] Initializing cgroup subsys freezer
[ 20.035334] Initializing cgroup subsys net_cls
[ 20.035341] Initializing cgroup subsys blkio
[ 20.035399] CPU: Testing write buffer coherency: ok
[ 20.035686] Setting up static identity map for 0x485fa0 - 0x485fdc
[ 20.037292] devtmpfs: initialized
[ 20.039251] prandom: seed boundary self test passed
[ 20.042248] prandom: 100 self tests passed
[ 20.042256] pinctrl core: initialized pinctrl subsystem
[ 20.042544] regulator-dummy: no parameters
[ 20.042800] NET: Registered protocol family 16
[ 20.043082] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 20.043659] cpuidle: using governor ladder
[ 20.043671] cpuidle: using governor menu
[ 20.043744] Kirkwood: MV88F6282-Rev-A1, TCLK=200000000.
[ 20.043760] Feroceon L2: Enabling L2
[ 20.043788] Feroceon L2: Cache support initialised.
[ 20.044085] initial MPP regs: 21111111 01103311 00051100 00000000 00000000 00000000 00000000
[ 20.044107] final MPP regs: 21111111 00003311 00051100 00000000 00000000 00000000 00000000
[ 20.044725] Kirkwood PCIe port 0: link up
[ 20.044733] PCI: bus0 uses PCIe port 0
[ 20.044823] PCI host bridge to bus 0000:00
[ 20.044838] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 20.044848] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 20.044857] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 20.044883] pci 0000:00:00.0: [11ab:6282] type 00 class 0x058000
[ 20.044903] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 20.044916] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[ 20.044952] pci 0000:00:00.0: supports D1 D2
[ 20.045083] pci 0000:00:01.0: [1033:0194] type 00 class 0x0c0330
[ 20.045115] pci 0000:00:01.0: reg 0x10: [mem 0x90000000-0x90001fff 64bit]
[ 20.045231] pci 0000:00:01.0: PME# supported from D0 D3hot
[ 20.045364] PCI: bus0: Fast back to back transfers disabled
[ 20.045377] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 20.045404] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit]
[ 20.048522] bio: create slab <bio-0> at 0
[ 20.048878] vgaarb: loaded
[ 20.049092] usbcore: registered new interface driver usbfs
[ 20.049142] usbcore: registered new interface driver hub
[ 20.049234] usbcore: registered new device driver usb
[ 20.049777] Switched to clocksource orion_clocksource
[ 20.068852] NET: Registered protocol family 2
[ 20.069376] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 20.069431] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 20.069482] TCP: Hash tables configured (established 4096 bind 4096)
[ 20.069532] TCP: reno registered
[ 20.069542] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 20.069561] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 20.069716] NET: Registered protocol family 1
[ 20.070001] RPC: Registered named UNIX socket transport module.
[ 20.070010] RPC: Registered udp transport module.
[ 20.070016] RPC: Registered tcp transport module.
[ 20.070021] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 20.070102] PCI: CLS 32 bytes, default 32
[ 20.070292] Unpacking initramfs...
[ 20.070303] Initramfs unpacking failed: junk in compressed archive
[ 20.087912] Freeing initrd memory: 6208K (c0801000 - c0e11000)
[ 20.087983] NetWinder Floating Point Emulator V0.97 (double precision)
[ 20.088400] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 20.088515] audit: initializing netlink subsys (disabled)
[ 20.088558] audit: type=2000 audit(0.080:1): initialized
[ 20.089058] bounce pool size: 64 pages
[ 20.089121] zbud: loaded
[ 20.089264] VFS: Disk quotas dquot_6.5.2
[ 20.089310] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.089534] NFS: Registering the id_resolver key type
[ 20.089576] Key type id_resolver registered
[ 20.089583] Key type id_legacy registered
[ 20.089596] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 20.089603] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.089717] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 20.089973] msgmni has been set to 1000
[ 20.090078] Key type big_key registered
[ 20.091427] alg: No test for stdrng (krng)
[ 20.091495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 20.091503] io scheduler noop registered
[ 20.091509] io scheduler deadline registered
[ 20.091535] io scheduler cfq registered (default)
[ 20.091745] mv_xor mv_xor.0: Marvell shared XOR driver
[ 20.129842] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 20.169817] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 20.169913] mv_xor mv_xor.1: Marvell shared XOR driver
[ 20.209821] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 20.249819] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 20.250041] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 20.270498] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 20.984072] console [ttyS0] enabled
[ 20.988392] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 20.994790] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 20.999426] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 21.005121] Scanning device for bad blocks
[ 21.011643] Bad eraseblock 21 at 0x0000002a0000
[ 21.017241] Bad eraseblock 31 at 0x0000003e0000
[ 21.023852] Bad eraseblock 50 at 0x000000640000
[ 21.029569] Bad eraseblock 61 at 0x0000007a0000
[ 21.036736] Bad eraseblock 85 at 0x000000aa0000
[ 21.041753] Bad eraseblock 89 at 0x000000b20000
[ 21.076499] Bad eraseblock 361 at 0x000002d20000
[ 21.104544] Bad eraseblock 572 at 0x000004780000
[ 21.135142] Bad eraseblock 806 at 0x0000064c0000
[ 21.164185] Creating 9 MTD partitions on "orion_nand":
[ 21.169348] 0x000000000000-0x000000100000 : "uboot"
[ 21.174505] 0x000000100000-0x000000180000 : "uboot_env"
[ 21.179964] 0x000000180000-0x000000200000 : "key_store"
[ 21.185408] 0x000000200000-0x000000280000 : "info"
[ 21.190438] 0x000000280000-0x000000c80000 : "etc"
[ 21.195357] 0x000000c80000-0x000001680000 : "kernel_1"
[ 21.200750] 0x000001680000-0x000004640000 : "rootfs1"
[ 21.206046] 0x000004640000-0x000005040000 : "kernel_2"
[ 21.211433] 0x000005040000-0x000008000000 : "rootfs2"
[ 21.217189] libphy: Fixed MDIO Bus: probed
[ 21.227260] libphy: orion_mdio_bus: probed
[ 21.231463] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 21.240884] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address fc:f5:28:0d:b2:15
[ 21.249764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.256351] ehci-pci: EHCI PCI platform driver
[ 21.260874] ehci-orion: EHCI orion driver
[ 21.264957] orion-ehci orion-ehci.0: EHCI Host Controller
[ 21.270426] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 21.278168] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 21.299796] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 21.305877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.312710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.319977] usb usb1: Product: EHCI Host Controller
[ 21.324876] usb usb1: Manufacturer: Linux 3.14.0-kirkwood-tld-1 ehci_hcd
[ 21.331618] usb usb1: SerialNumber: orion-ehci.0
[ 21.336684] hub 1-0:1.0: USB hub found
[ 21.340494] hub 1-0:1.0: 1 port detected
[ 21.344834] mousedev: PS/2 mouse device common for all mice
[ 21.659819] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 21.811306] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 21.818043] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 21.825232] usb 1-1: Product: USB2.0 Hub
[ 21.829801] hub 1-1:1.0: USB hub found
[ 21.833929] hub 1-1:1.0: 4 ports detected
[ 22.120180] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[ 22.359797] rtc-mv rtc-mv: internal RTC not ticking
[ 22.364781] i2c /dev entries driver
[ 22.368786] orion_gpio_is_valid: invalid GPIO 12
[ 22.374010] hidraw: raw HID events driver (C) Jiri Kosina
[ 22.379630] drop_monitor: Initializing network drop monitor service
[ 22.386088] TCP: cubic registered
[ 22.389412] NET: Registered protocol family 17
[ 22.393982] Key type dns_resolver registered
[ 22.398619] registered taskstats version 1
[ 22.403172] regulator-dummy: incomplete constraints, leaving on
[ 22.409482] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 22.415831] usb 1-1.3: New USB device found, idVendor=1307, idProduct=0310
[ 22.422784] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 22.431036] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6
[ 22.439084] Please append a correct "root=" boot option; here are the available partitions:
[ 22.447500] usb 1-1.3: Product: Mass Storage Device
|
Re: NSA325v1 broken flash May 05, 2021 06:23PM |
Admin Registered: 14 years ago Posts: 19,927 |
e2label /dev/sdb1
|
Re: NSA325v1 broken flash May 06, 2021 12:19AM |
Registered: 8 years ago Posts: 22 |
|
Re: NSA325v1 broken flash May 06, 2021 03:28AM |
Admin Registered: 14 years ago Posts: 19,927 |
|
Re: NSA325v1 broken flash May 06, 2021 04:26AM |
Registered: 8 years ago Posts: 22 |
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.05.06 11:20:20 =~=~=~=~=~=~=~=~=~=~=~=
ü
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Sep 16 2011 - 17:51:53) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFF00
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 10M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (10M - 7M): Done
NAND:128 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Kernel address is 0x4640000.
Streaming disabled
Write allocate disabled
USB 0: host mode
[BlueDBG] reseting SoC Pex[0] 0 ...
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
[BlueDBG] reseting SoC Pex[1] 0 ...
[BlueDBG] reseting SoC Pex[1] 1 ...
[BlueDBG] reseting SoC Pex[1] 2 ...
[BlueDBG] reseting SoC Pex[1] 3 ...
[BlueDBG] reseting SoC Pex[1] 4 ...
[BlueDBG] reseting SoC Pex[1] 5 ...
[BlueDBG] reseting SoC Pex[1] 6 ...
[BlueDBG] reseting SoC Pex[1] 7 ...
[BlueDBG] reseting SoC Pex[1] 8 ...
[BlueDBG] reseting SoC Pex[1] 9 ...
[BlueDBG] reseting SoC Pex[1] 10 ...
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 2 1 0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
....
.
...................
.........................
...................................................
......................................................................................................
..................................................................................................................................................
3602280 bytes read
....
.
...................
.........................
...................................................
......................................................................................................
............................................................................................................................................................................................................
....
..............................................................................................................................................................................................................
6362802 bytes read
## Booting image at 02000000 ...
Image Name: ARM OpenWrt Linux-4.14.162
Created: 2020-01-06 16:47:09 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3602216 Bytes = 3.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
Image Name: initramfs-3.14.0-kirkwood-tld-1
Created: 2014-04-06 20:44:41 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6362738 Bytes = 6.1 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.162 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10860-a3ffeb413b)) #0 Mon Jan 6 16:47:09 2020
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] OF: fdt: Machine model: ZyXEL NSA325
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] INITRD: 0x00800000+0x00612000 overlaps in-use memory region - disabling initrd
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0d284d8, node_mem_map dfbfa000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc0700980 with crng_init=0
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=LABEL=rootfs loglevel=8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 506988K/524288K available (4802K kernel code, 162K rwdata, 728K rodata, 6144K init, 208K bss, 17300K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05b0a50 (5795 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0d00000 (6144 kB)
[ 0.000000] .data : 0xc0d00000 - 0xc0d28b40 ( 163 kB)
[ 0.000000] .bss : 0xc0d28b40 - 0xc0d5cf1c ( 209 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 0.000005] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 0.000027] Switching to timer-based delay loop, resolution 5ns
[ 0.000088] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000)
[ 0.000105] pid_max: default: 32768 minimum: 301
[ 0.000208] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000223] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000602] CPU: Testing write buffer coherency: ok
[ 0.001174] Setting up static identity map for 0x100000 - 0x10003c
[ 0.001375] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
[ 0.004794] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004813] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.004881] pinctrl core: initialized pinctrl subsystem
[ 0.005693] NET: Registered protocol family 16
[ 0.005982] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.006701] cpuidle: using governor ladder
[ 0.006999] Feroceon L2: Enabling L2
[ 0.007031] Feroceon L2: Cache support initialised.
[ 0.007223] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.010111] No ATAGs?
[ 0.022710] SCSI subsystem initialized
[ 0.023062] libata version 3.00 loaded.
[ 0.023237] usbcore: registered new interface driver usbfs
[ 0.023280] usbcore: registered new interface driver hub
[ 0.023322] usbcore: registered new device driver usb
[ 0.024784] clocksource: Switched to clocksource orion_clocksource
[ 0.025387] NET: Registered protocol family 2
[ 0.025837] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.025890] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.025939] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.025998] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.026017] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.026121] NET: Registered protocol family 1
[ 0.026142] PCI: CLS 0 bytes, default 32
[ 0.099960] Crashlog allocated RAM at address 0x3f00000
[ 0.100538] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.103766] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.103775] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.157333] io scheduler noop registered
[ 0.157344] io scheduler deadline registered (default)
[ 0.158213] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.159308] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
[ 0.159322] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.159330] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
[ 0.159338] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.159363] pci 0000:00:01.0: [11ab:6282] type 01 class 0x060400
[ 0.159506] PCI: bus0: Fast back to back transfers disabled
[ 0.159517] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.159610] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.159656] pci 0000:01:00.0: reg 0x10: [mem 0x90000000-0x90001fff 64bit]
[ 0.159786] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 0.159890] PCI: bus1: Fast back to back transfers disabled
[ 0.159901] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.159927] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe00fffff]
[ 0.159939] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit]
[ 0.159957] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.159968] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff]
[ 0.160002] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 0.160370] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.161727] console [ttyS0] disabled
[ 0.161782] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 0.756435] console [ttyS0] enabled
[ 0.760547] sata_mv f1080000.sata: version 1.28
[ 0.765316] sata_mv f1080000.sata: slots 32 ports 2
[ 0.772791] scsi host0: sata_mv
[ 0.776357] scsi host1: sata_mv
[ 0.779620] ata1: SATA max UDMA/133 irq 32
[ 0.783736] ata2: SATA max UDMA/133 irq 32
[ 0.788220] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 0.794599] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 0.799252] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.806869] Scanning device for bad blocks
[ 0.813171] Bad eraseblock 21 at 0x0000002a0000
[ 0.818698] Bad eraseblock 31 at 0x0000003e0000
[ 0.825132] Bad eraseblock 50 at 0x000000640000
[ 0.830751] Bad eraseblock 61 at 0x0000007a0000
[ 0.837701] Bad eraseblock 85 at 0x000000aa0000
[ 0.842603] Bad eraseblock 89 at 0x000000b20000
[ 0.874837] Bad eraseblock 361 at 0x000002d20000
[ 0.900913] Bad eraseblock 572 at 0x000004780000
[ 0.929337] Bad eraseblock 806 at 0x0000064c0000
[ 0.956122] 3 fixed-partitions partitions found on MTD device orion_nand
[ 0.962852] Creating 3 MTD partitions on "orion_nand":
[ 0.968023] 0x000000000000-0x0000000c0000 : "uboot"
[ 0.973328] 0x0000000c0000-0x000000140000 : "uboot_env"
[ 0.978949] 0x000000140000-0x000008000000 : "ubi"
[ 0.984730] libphy: Fixed MDIO Bus: probed
[ 0.989056] libphy: orion_mdio_bus: probed
[ 0.999915] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 1.008158] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address fc:f5:28:0d:b2:15
[ 1.016966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.023517] ehci-pci: EHCI PCI platform driver
[ 1.028024] ehci-orion: EHCI orion driver
[ 1.032186] orion-ehci f1050000.ehci: EHCI Host Controller
[ 1.037732] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 1.045625] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
[ 1.074795] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 1.081228] hub 1-0:1.0: USB hub found
[ 1.085165] hub 1-0:1.0: 1 port detected
[ 1.089421] usbcore: registered new interface driver usb-storage
[ 1.095612] i2c /dev entries driver
[ 1.099968] orion_wdt: Initial timeout 21 sec
[ 1.152011] marvell-cesa f1030000.crypto: CESA device successfully registered
[ 1.159860] NET: Registered protocol family 10
[ 1.165694] Segment Routing with IPv6
[ 1.169423] NET: Registered protocol family 17
[ 1.173908] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.186938] 8021q: 802.1Q VLAN Support v1.8
[ 1.193648] UBI error: no valid UBI magic found inside mtd2
[ 1.199410] hctosys: unable to open rtc device (rtc0)
[ 1.316072] ata1: SATA link down (SStatus 0 SControl F300)
[ 1.464793] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 1.646043] ata2: SATA link down (SStatus 0 SControl F300)
[ 1.668687] Freeing unused kernel memory: 6144K
[ 1.675744] hub 1-1:1.0: USB hub found
[ 1.684394] init: Console is alive
[ 1.687902] hub 1-1:1.0: 4 ports detected
[ 1.692268] init: - watchdog -
[ 1.700640] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 1.707779] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 1.717754] init: - preinit -
[ 1.754809] random: fast init done
[ 1.809787] random: jshn: uninitialized urandom read (4 bytes read)
[ 1.838074] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.076006] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.149865] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 2.159683] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down
[ 2.166467] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.172429] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 2.462790] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.469515] scsi host2: usb-storage 1-1.3:1.0
[ 3.755555] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled
[ 3.765381] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4.330466] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
[ 4.340039] sd 2:0:0:0: [sda] 3981312 512-byte logical blocks: (2.04 GB/1.90 GiB)
[ 4.348027] sd 2:0:0:0: [sda] Write Protect is off
[ 4.352844] sd 2:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 4.358405] sd 2:0:0:0: [sda] No Caching mode page found
[ 4.363742] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.373555] sda: sda1
[ 4.378030] sd 2:0:0:0: [sda] Attached SCSI removable disk
|
Re: NSA325v1 broken flash May 06, 2021 04:35PM |
Admin Registered: 14 years ago Posts: 19,927 |
Quote
[ 4.378030] sd 2:0:0:0: [sda] Attached SCSI removable disk
|
Re: NSA325v1 broken flash May 06, 2021 11:50PM |
Registered: 8 years ago Posts: 22 |
|
Re: NSA325v1 broken flash May 07, 2021 08:03PM |
Admin Registered: 14 years ago Posts: 19,927 |
|
Re: NSA325v1 broken flash May 11, 2021 03:32AM |
Registered: 8 years ago Posts: 22 |
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__|
** MARVELL BOARD: DB-88F6282A-BP LE
U-Boot 1.1.4 (Sep 16 2011 - 17:51:53) Marvell version: 3.5.9
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFF00
Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz
SysClock = 533Mhz , TClock = 200Mhz
DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
DRAM CS[0] base 0x00000000 size 512MB
DRAM Total size 512MB 16bit width
Addresses 10M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (10M - 7M): Done
NAND:128 MB
Flash: 0 kB
CPU : Marvell Feroceon (Rev 1)
Kernel address is 0x4640000.
Streaming disabled
Write allocate disabled
USB 0: host mode
PEX 0: PCI Express Root Complex Interface
PEX interface detected Link X1
PEX 1: interface detected no Link.
Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
Waiting for storage device(s) to settle before scanning...
1 Storage Device(s) found
....
.
......
............
.........................
...................................................
......................................................................................................
.............................................................................................................................................................
........................................
4661512 bytes read
....
.
......
............
.........................
...................................................
......................................................................................................
.............................................................................................................................................................
.............................................................................................................................................................
6535284 bytes read
## Booting image at 02000000 ...
Image Name: Linux-4.4.252-1-ARCH
Created: 2021-01-19 3:00:22 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4661448 Bytes = 4.4 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at 00800000 ...
Image Name: Ramdisk armhf
Created: 2021-05-11 6:32:58 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6535220 Bytes = 6.2 MB
Load Address: 01100000
Entry Point: 00000000
Verifying Checksum ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.252-1-ARCH (builduser@leming) (gcc version 10.2.0 (GCC) ) #1 PREEMPT Tue Jan 19 03:15:48 UTC 2021
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: ZyXEL NSA325 2-Bay Power Media Server
[ 0.000000] INITRD: 0x00800040+0x0063b834 overlaps in-use memory region - disabling initrd
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c093cf64, node_mem_map dfb7a000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc)8
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 509016K/524288K available (6745K kernel code, 549K rwdata, 1876K rodata, 296K init, 720K bss, 15272K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0873980 (8623 kB)
[ 0.000000] .init : 0xc0874000 - 0xc08be000 ( 296 kB)
[ 0.000000] .data : 0xc08be000 - 0xc09474dc ( 550 kB)
[ 0.000000] .bss : 0xc09474dc - 0xc09fb698 ( 721 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:114
[ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
[ 19.640178] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
[ 19.640331] Console: colour dummy device 80x30
[ 19.640353] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
[ 19.680228] pid_max: default: 32768 minimum: 301
[ 19.680299] Security Framework initialized
[ 19.680364] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 19.680377] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 19.680942] Initializing cgroup subsys io
[ 19.680967] Initializing cgroup subsys memory
[ 19.681008] Initializing cgroup subsys devices
[ 19.681026] Initializing cgroup subsys freezer
[ 19.681041] Initializing cgroup subsys net_cls
[ 19.681054] Initializing cgroup subsys perf_event
[ 19.681069] Initializing cgroup subsys net_prio
[ 19.681129] CPU: Testing write buffer coherency: ok
[ 19.681477] Setting up static identity map for 0x81e0 - 0x8238
[ 19.682927] devtmpfs: initialized
[ 19.684603] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 19.684630] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 19.684957] pinctrl core: initialized pinctrl subsystem
[ 19.685558] NET: Registered protocol family 16
[ 19.685872] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 19.710242] cpuidle: using governor ladder
[ 19.740242] cpuidle: using governor menu
[ 19.740328] Kirkwood: MV88F6282-Rev-A1, TCLK=200000000.
[ 19.740348] Feroceon L2: Enabling L2
[ 19.740376] Feroceon L2: Cache support initialised.
[ 19.740924] initial MPP regs: 21111111 01103311 00051100 00000000 00000000 00000000 00000000
[ 19.740946] final MPP regs: 21111111 00003311 00051100 00000000 00000000 00000000 00000000
[ 19.742054] Kirkwood PCIe port 0: link up
[ 19.742062] PCI: bus0 uses PCIe port 0
[ 19.742236] PCI host bridge to bus 0000:00
[ 19.742250] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 19.742259] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 19.742266] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 19.742290] pci 0000:00:00.0: [11ab:6282] type 00 class 0x058000
[ 19.742316] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 19.742327] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[ 19.742367] pci 0000:00:00.0: supports D1 D2
[ 19.742542] pci 0000:00:01.0: [1033:0194] type 00 class 0x0c0330
[ 19.742595] pci 0000:00:01.0: reg 0x10: [mem 0x90000000-0x90001fff 64bit]
[ 19.742710] pci 0000:00:01.0: PME# supported from D0 D3hot
[ 19.742912] PCI: bus0: Fast back to back transfers disabled
[ 19.742925] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 19.742948] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe0001fff 64bit]
[ 19.771354] vgaarb: loaded
[ 19.771605] SCSI subsystem initialized
[ 19.771746] libata version 3.00 loaded.
[ 19.771982] usbcore: registered new interface driver usbfs
[ 19.772045] usbcore: registered new interface driver hub
[ 19.772085] usbcore: registered new device driver usb
[ 19.772204] pps_core: LinuxPPS API ver. 1 registered
[ 19.772210] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 19.772234] PTP clock support registered
[ 19.772997] clocksource: Switched to clocksource orion_clocksource
[ 19.803891] FS-Cache: Loaded
[ 19.813631] NET: Registered protocol family 2
[ 19.814251] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.814306] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 19.814356] TCP: Hash tables configured (established 4096 bind 4096)
[ 19.814409] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 19.814429] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 19.814591] NET: Registered protocol family 1
[ 19.814840] RPC: Registered named UNIX socket transport module.
[ 19.814848] RPC: Registered udp transport module.
[ 19.814853] RPC: Registered tcp transport module.
[ 19.814858] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.814949] PCI: CLS 32 bytes, default 32
[ 19.826005] VFS: Disk quotas dquot_6.6.0
[ 19.826205] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.827754] FS-Cache: Netfs 'nfs' registered for caching
[ 19.828615] NFS: Registering the id_resolver key type
[ 19.828671] Key type id_resolver registered
[ 19.828677] Key type id_legacy registered
[ 19.828751] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 19.829730] fuse init (API version 7.23)
[ 19.831279] aufs 4.4-20170911
[ 19.835397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 19.835413] io scheduler noop registered
[ 19.835423] io scheduler deadline registered
[ 19.835634] io scheduler cfq registered
[ 19.835829] io scheduler bfq registered (default)
[ 19.835835] BFQ I/O-scheduler: v7r11
[ 19.836011] mv_xor mv_xor.0: Marvell shared XOR driver
[ 19.873934] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy )
[ 19.874124] mv_xor mv_xor.1: Marvell shared XOR driver
[ 19.913935] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy )
[ 19.918176] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 19.918953] console [ttyS0] disabled
[ 19.939018] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 20.667728] console [ttyS0] enabled
[ 20.682684] brd: module loaded
[ 20.691470] loop: module loaded
[ 20.694918] sata_mv sata_mv.0: version 1.28
[ 20.699165] sata_mv sata_mv.0: cannot get optional clkdev
[ 20.704729] sata_mv sata_mv.0: slots 32 ports 2
[ 20.711630] scsi host0: sata_mv
[ 20.715214] scsi host1: sata_mv
[ 20.718614] ata1: SATA max UDMA/133 irq 21
[ 20.722727] ata2: SATA max UDMA/133 irq 21
[ 20.727475] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 20.734053] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 20.738686] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 20.746306] Scanning device for bad blocks
[ 20.752847] Bad eraseblock 21 at 0x0000002a0000
[ 20.758496] Bad eraseblock 31 at 0x0000003e0000
[ 20.765144] Bad eraseblock 50 at 0x000000640000
[ 20.770875] Bad eraseblock 61 at 0x0000007a0000
[ 20.778080] Bad eraseblock 85 at 0x000000aa0000
[ 20.783029] Bad eraseblock 89 at 0x000000b20000
[ 20.818187] Bad eraseblock 361 at 0x000002d20000
[ 20.846559] Bad eraseblock 572 at 0x000004780000
[ 20.877521] Bad eraseblock 806 at 0x0000064c0000
[ 20.906865] Creating 9 MTD partitions on "orion_nand":
[ 20.912025] 0x000000000000-0x000000100000 : "uboot"
[ 20.917364] 0x000000100000-0x000000180000 : "uboot_env"
[ 20.922945] 0x000000180000-0x000000200000 : "key_store"
[ 20.928567] 0x000000200000-0x000000280000 : "info"
[ 20.933767] 0x000000280000-0x000000c80000 : "etc"
[ 20.938830] 0x000000c80000-0x000001680000 : "kernel_1"
[ 20.944380] 0x000001680000-0x000004640000 : "rootfs1"
[ 20.949837] 0x000004640000-0x000005040000 : "kernel_2"
[ 20.955377] 0x000005040000-0x000008000000 : "rootfs2"
[ 20.967671] libphy: orion_mdio_bus: probed
[ 20.971860] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 20.981385] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address fc:f5:28:0d:b2:15
[ 20.990284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 20.996877] ehci-pci: EHCI PCI platform driver
[ 21.001394] ehci-orion: EHCI orion driver
[ 21.005515] orion-ehci orion-ehci.0: EHCI Host Controller
[ 21.010950] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 21.018698] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 21.043022] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 21.049685] hub 1-0:1.0: USB hub found
[ 21.053520] hub 1-0:1.0: 1 port detected
[ 21.057939] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 21.063248] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 21.070953] xhci_hcd 0000:00:01.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
[ 21.080109] hub 2-0:1.0: USB hub found
[ 21.083997] hub 2-0:1.0: 2 ports detected
[ 21.088489] xhci_hcd 0000:00:01.0: xHCI Host Controller
[ 21.093783] xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
[ 21.101282] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 21.110097] hub 3-0:1.0: USB hub found
[ 21.113927] hub 3-0:1.0: 2 ports detected
[ 21.118633] usbcore: registered new interface driver uas
[ 21.124130] usbcore: registered new interface driver usb-storage
[ 21.130206] usbcore: registered new interface driver ums-alauda
[ 21.136227] usbcore: registered new interface driver ums-cypress
[ 21.142294] usbcore: registered new interface driver ums-datafab
[ 21.148380] usbcore: registered new interface driver ums_eneub6250
[ 21.154702] usbcore: registered new interface driver ums-freecom
[ 21.160772] usbcore: registered new interface driver ums-isd200
[ 21.166771] usbcore: registered new interface driver ums-jumpshot
[ 21.172926] usbcore: registered new interface driver ums-karma
[ 21.178837] usbcore: registered new interface driver ums-onetouch
[ 21.185134] usbcore: registered new interface driver ums-realtek
[ 21.191206] usbcore: registered new interface driver ums-sddr09
[ 21.197206] usbcore: registered new interface driver ums-sddr55
[ 21.203206] usbcore: registered new interface driver ums-usbat
[ 21.209399] mousedev: PS/2 mouse device common for all mice
[ 21.243025] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F300)
[ 21.283055] ata1.00: ATA-7: FUJITSU MHT2080BH, 0000104B, max UDMA/100
[ 21.289529] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 21.353057] ata1.00: configured for UDMA/100
[ 21.373023] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 21.380157] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080B 104B PQ: 0 ANSI: 5
[ 21.389091] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 21.397089] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.402783] sd 0:0:0:0: [sda] Write Protect is off
[ 21.407750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 21.412907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 21.535263] hub 1-1:1.0: USB hub found
[ 21.539333] hub 1-1:1.0: 4 ports detected
[ 21.753021] ata2: SATA link down (SStatus 0 SControl F300)
[ 21.785860] sda: sda1
[ 21.789198] sd 0:0:0:0: [sda] Attached SCSI disk
[ 21.823016] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[ 22.111905] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 22.118472] scsi host2: usb-storage 1-1.3:1.0
[ 22.223017] rtc-mv rtc-mv: internal RTC not ticking
[ 22.228022] i2c /dev entries driver
[ 22.232394] sdhci: Secure Digital Host Controller Interface driver
[ 22.238624] sdhci: Copyright(c) Pierre Ossman
[ 22.243057] sdhci-pltfm: SDHCI platform and OF driver helper
[ 22.248775] orion_gpio_is_valid: invalid GPIO 12
[ 22.254530] ledtrig-cpu: registered to indicate activity on CPUs
[ 22.260687] usbcore: registered new interface driver r8712u
[ 22.266473] gre: GRE over IPv4 demultiplexor driver
[ 22.271417] NET: Registered protocol family 17
[ 22.275990] Key type dns_resolver registered
[ 22.281015] registered taskstats version 1
[ 22.286600] Key type encrypted registered
[ 22.291090] console [netcon0] enabled
[ 22.294814] netconsole: network logging started
[ 22.299698] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 22.306703] hctosys: unable to open rtc device (rtc0)
[ 22.312827] VFS: Cannot open root device "LABEL=rootfs" or unknown-block(0,0): error -6
[ 22.321020] Please append a correct "root=" boot option; here are the available partitions:
[ 22.329463] 0100 8192 ram0 (driver?)
[ 22.334117] 0101 8192 ram1 (driver?)
[ 22.338763] 0102 8192 ram2 (driver?)
[ 22.343414] 0103 8192 ram3 (driver?)
[ 22.348058] 0104 8192 ram4 (driver?)
[ 22.352697] 0105 8192 ram5 (driver?)
[ 22.357347] 0106 8192 ram6 (driver?)
[ 22.362002] 0107 8192 ram7 (driver?)
[ 22.366650] 0108 8192 ram8 (driver?)
[ 22.371289] 0109 8192 ram9 (driver?)
[ 22.375937] 010a 8192 ram10 (driver?)
[ 22.380671] 010b 8192 ram11 (driver?)
[ 22.385407] 010c 8192 ram12 (driver?)
[ 22.390132] 010d 8192 ram13 (driver?)
[ 22.394868] 010e 8192 ram14 (driver?)
[ 22.399603] 010f 8192 ram15 (driver?)
[ 22.404341] 0800 78150744 sda driver: sd
[ 22.408985] 0801 78149632 sda1 f50a60a3-01
[ 22.413895] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 22.422197] CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.252-1-ARCH #1
[ 22.428664] Hardware name: ZyXEL NSA325 2-Bay Power Media Server
[ 22.434708] [<c000febc>] (unwind_backtrace) from [<c000d43c>] (show_stack+0x10/0x14)
[ 22.442489] [<c000d43c>] (show_stack) from [<c0664674>] (panic+0x9c/0x21c)
[ 22.449401] [<c0664674>] (panic) from [<c08752a8>] (mount_block_root+0x1a4/0x250)
[ 22.456914] [<c08752a8>] (mount_block_root) from [<c08756b0>] (prepare_namespace+0x15c/0x1bc)
[ 22.465476] [<c08756b0>] (prepare_namespace) from [<c0874e60>] (kernel_init_freeable+0x1e8/0x238)
[ 22.474389] [<c0874e60>] (kernel_init_freeable) from [<c066ca04>] (kernel_init+0x8/0xe0)
[ 22.482515] [<c066ca04>] (kernel_init) from [<c000a4c8>] (ret_from_fork+0x14/0x2c)
[ 22.490119] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
|
Re: NSA325v1 broken flash May 11, 2021 04:30AM |
Admin Registered: 14 years ago Posts: 19,927 |
LABEL=rootfs / ext3 noatime,errors=remount-ro 0 1
/dev/sda1 / ext3 noatime,errors=remount-ro 0 1