POGO-E02 Debian installation broken

Hi,
my deabian installation crashed recently.
my usb stick is broken and all data on it is lost.
i am stuck with an POGO-E02(black) looping arround without an usb stick.

i have no idear on gettin it runnig again,
i tested a ARCHLINUX usb boot stick which worked,
but there was no access to the mtdblock1 to reset it to original Pogoplug.

is there any solution for my problem,
for example an image of another usb stick to boot in the system again?

zAM Wrote:
-------------------------------------------------------
> Hi,
> my deabian installation crashed recently.
> my usb stick is broken and all data on it is
> lost.
> i am stuck with an POGO-E02(black) looping arround
> without an usb stick.
>
> i have no idear on gettin it runnig again,
> i tested a ARCHLINUX usb boot stick which worked,
> but there was no access to the mtdblock1 to reset
> it to original Pogoplug.
>
> is there any solution for my problem,
> for example an image of another usb stick to boot
> in the system again?

Did you set up netconsole on it before it crashed? if not, then try booting with your Arch stick. And then set up netconsole as instructed here:
http://forum.doozan.com/read.php?3,14

Once you have netconsole, it's easier to boot the Pogo E02 with Davy's NSA320 rootfs
http://forum.doozan.com/read.php?2,7806
Currently this rootfs does not boot Pogo E02 without changing arcNumber in uBoot envs, hence netconsole is needed. Also, netconsole is a really good tool to debug booting problem, if you don't have serial console and not wanting to mess with hardware.

Hello,

mine debian wheezy installation is broken to and i dont got a rescue system installed. ive tried a lot of new installtions of debian squeeze, dmesg says me that debian is booting but i dont get a ip or ssh. when im booting without a usb drive on it i can login via ssh on the pogo and see the ip on my router. damn

how can i fix it?

thx