Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 06:53AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 08:10AM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 10:49AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 11:08AM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 11:15AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 09:58PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 DockStar> printenv arcNumber=2998 baudrate=115200 bootcmd=run bootcmd_uenv; run force_rescue_bootcmd; run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; run rescue_bootcmd; reset bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=10 console=ttyS0,115200 device=0:1 ethact=egiga0 ethaddr=00:10:75:1A:3D:0C force_rescue=0 force_rescue_bootcmd=if test -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi if_netconsole=ping $serverip ipaddr=192.168.2.108 led_error=orange blinking led_exit=green off led_init=green blinking mainlineLinux=yes mmc_boot=mw 0x800000 0 1; run mmc_load_uimage; if run mmc_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi mmc_init=mmc rescan mmc_load_uimage=ext2load mmc $device 0x800000 /boot/uImage mmc_load_uinitrd=ext2load mmc $device 0x1100000 /boot/uInitrd mmc_root=/dev/mmcblk0p1 mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi preboot_nc=run if_netconsole start_netconsole rescue_bootcmd=if test -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi rescue_installed=1 rescue_set_bootargs=setenv bootargs console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs rootdelay=10 rootfstype=ext3 sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_init=ide reset sata_load_uimage=ext2load ide $device 0x800000 /boot/uImage sata_load_uinitrd=ext2load ide $device 0x1100000 /boot/uInitrd sata_root=/dev/sda1 serverip=192.168.2.106 set_bootargs_mmc=setenv bootargs console=$console root=$mmc_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x810000 uenv_load=usb start; mmc rescan; ide reset; setenv uenv_loaded 0; for devtype in usb mmc ide; do for disknum in 0; do run uenv_read_disk; done; done uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_init=usb start usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd usb_root=/dev/sda1 Environment size: 3372/131068 bytes DockStar>
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 10:03PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' no USB devices available Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Created: 2011-02-17 8:10:10 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux............................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.18-dockstar (root@stfu.tcbnet) (gcc version 4.3.5 (Buildroot 2010.08) ) #1 Thu Feb 17 03:09:57 EST 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate FreeAgent DockStar [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 122836KB available (5968K code, 708K data, 128K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 21.474969] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 21.714930] Security Framework initialized [ 21.714953] SELinux: Disabled at boot. [ 21.714982] Mount-cache hash table entries: 512 [ 21.715294] Initializing cgroup subsys ns [ 21.715311] Initializing cgroup subsys cpuacct [ 21.715321] Initializing cgroup subsys devices [ 21.715330] Initializing cgroup subsys freezer [ 21.715337] Initializing cgroup subsys net_cls [ 21.715383] CPU: Testing write buffer coherency: ok [ 21.716191] devtmpfs: initialized [ 21.717934] regulator: core version 0.5 [ 21.718159] NET: Registered protocol family 16 [ 21.718690] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 21.718704] Feroceon L2: Enabling L2 [ 21.718739] Feroceon L2: Cache support initialised. [ 21.721790] bio: create slab <bio-0> at 0 [ 21.722063] vgaarb: loaded [ 21.722340] SCSI subsystem initialized [ 21.722588] usbcore: registered new interface driver usbfs [ 21.722648] usbcore: registered new interface driver hub [ 21.722742] usbcore: registered new device driver usb [ 21.723179] Switching to clocksource orion_clocksource [ 21.728506] NET: Registered protocol family 2 [ 21.728768] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 21.729584] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 21.729684] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 21.729737] TCP: Hash tables configured (established 4096 bind 4096) [ 21.729746] TCP reno registered [ 21.729907] NET: Registered protocol family 1 [ 21.730198] RPC: Registered udp transport module. [ 21.730207] RPC: Registered tcp transport module. [ 21.730215] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.730359] NetWinder Floating Point Emulator V0.97 (double precision) [ 21.730611] audit: initializing netlink socket (disabled) [ 21.730641] type=2000 audit(0.241:1): initialized [ 21.737424] VFS: Disk quotas dquot_6.5.2 [ 21.737685] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.740276] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.741887] Registering the dns_resolver key type [ 21.741938] Slow work thread pool: Starting up [ 21.742056] Slow work thread pool: Ready [ 21.742066] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 21.742826] fuse init (API version 7.13) [ 21.743319] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 21.744857] msgmni has been set to 240 [ 21.746951] alg: No test for stdrng (krng) [ 21.747105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 21.747118] io scheduler noop registered [ 21.747126] io scheduler anticipatory registered [ 21.747133] io scheduler deadline registered [ 21.747394] io scheduler cfq registered (default) [ 21.753415] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 21.753875] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 22.133359] console [ttyS0] enabled [ 22.137442] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 22.146066] Scanning device for bad blocks [ 22.226099] Creating 3 MTD partitions on "orion_nand": [ 22.231264] 0x000000000000-0x000000100000 : "u-boot" [ 22.236836] 0x000000100000-0x000000500000 : "uImage" [ 22.242268] 0x000000500000-0x000010000000 : "root" [ 22.247971] UBI: attaching mtd2 to ubi0 [ 22.251831] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 22.258143] UBI: logical eraseblock size: 129024 bytes [ 22.263575] UBI: smallest flash I/O unit: 2048 [ 22.268299] UBI: sub-page size: 512 [ 22.272939] UBI: VID header offset: 512 (aligned 512) [ 22.278807] UBI: data offset: 2048 [ 22.333186] UBI error: ubi_scan_add_used: two LEBs with same sequence number 1 [ 22.340556] UBI error: ubi_init: cannot attach mtd2 [ 22.345586] UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 [ 22.352841] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 22.358618] mv643xx_eth smi: probed [ 22.363953] net eth0: port 0 with MAC address 00:10:75:1a:3d:0c [ 22.369979] console [netcon0] enabled [ 22.373673] netconsole: network logging started [ 22.378225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.384840] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 22.390136] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 22.423233] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 22.443216] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 22.449217] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.456049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.463316] usb usb1: Product: Marvell Orion EHCI [ 22.468041] usb usb1: Manufacturer: Linux 2.6.32.18-dockstar ehci_hcd [ 22.474519] usb usb1: SerialNumber: orion-ehci.0 [ 22.479476] usb usb1: configuration #1 chosen from 1 choice [ 22.485230] hub 1-0:1.0: USB hub found [ 22.489022] hub 1-0:1.0: 1 port detected [ 22.493262] Initializing USB Mass Storage driver... [ 22.498244] usbcore: registered new interface driver usb-storage [ 22.504300] USB Mass Storage support registered. [ 22.509154] mice: PS/2 mouse device common for all mice [ 22.514475] i2c /dev entries driver [ 22.518737] device-mapper: uevent: version 1.0.3 [ 22.523793] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 22.532354] cpuidle: using governor ladder [ 22.536618] cpuidle: using governor menu [ 22.540655] Registered led device: dockstar:green:health [ 22.546067] Registered led device: dockstar:orange:misc [ 22.551370] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 22.557794] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 22.603250] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 22.643246] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 22.683298] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 22.723247] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 22.729033] Netfilter messages via NETLINK v0.30. [ 22.733831] nf_conntrack version 0.5.0 (1921 buckets, 7684 max) [ 22.740283] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 22.747740] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 22.755706] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.764302] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.769693] TCP cubic registered [ 22.772937] NET: Registered protocol family 17 [ 22.777781] registered taskstats version 1 [ 22.782588] Initalizing network drop monitor service [ 22.787674] md: Waiting for all devices to be available before autodetect [ 22.794503] md: If you don't use raid, use raid=noautodetect [ 22.800578] md: Autodetecting RAID arrays. [ 22.804713] md: Scanned 0 and added 0 devices. [ 22.809174] md: autorun ... [ 22.811973] md: ... autorun DONE. [ 22.815338] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 22.822573] UBIFS error (pid 1): ubifs_get_sb: cannot open "ubi0:rootfs", error -19 [ 22.830309] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0) [ 22.837406] Please append a correct "root=" boot option; here are the available partitions: [ 22.845822] 1f00 1024 mtdblock0 (driver?) [ 22.850817] 1f01 4096 mtdblock1 (driver?) [ 22.855824] 1f02 257024 mtdblock2 (driver?) [ 22.860818] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 22.869153] [<c002eee4>] (unwind_backtrace+0x0/0xdc) from [<c04a31d4>] (panic+0x34/0x128) [ 22.877391] [<c04a31d4>] (panic+0x34/0x128) from [<c0008f5c>] (mount_block_root+0x25c/0x2b4) [ 22.885887] [<c0008f5c>] (mount_block_root+0x25c/0x2b4) from [<c00090b0>] (prepare_namespace+0x90/0x190) [ 22.895427] [<c00090b0>] (prepare_namespace+0x90/0x190) from [<c00085e0>] (kernel_init+0xf0/0x12c) [ 22.904448] [<c00085e0>] (kernel_init+0xf0/0x12c) from [<c0029e7c>] (kernel_thread_exit+0x0/0x8)
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 11:31PM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 29, 2015 11:43PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 15122944 000e2f0c-01 83 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Created: 2011-02-17 8:10:10 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux............................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.18-dockstar (root@stfu.tcbnet) (gcc version 4.3.5 (Buildroot 2010.08) ) #1 Thu Feb 17 03:09:57 EST 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate FreeAgent DockStar [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 122836KB available (5968K code, 708K data, 128K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 21.474969] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 21.714930] Security Framework initialized [ 21.714953] SELinux: Disabled at boot. [ 21.714982] Mount-cache hash table entries: 512 [ 21.715294] Initializing cgroup subsys ns [ 21.715311] Initializing cgroup subsys cpuacct [ 21.715321] Initializing cgroup subsys devices [ 21.715330] Initializing cgroup subsys freezer [ 21.715337] Initializing cgroup subsys net_cls [ 21.715383] CPU: Testing write buffer coherency: ok [ 21.716191] devtmpfs: initialized [ 21.717934] regulator: core version 0.5 [ 21.718159] NET: Registered protocol family 16 [ 21.718690] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 21.718704] Feroceon L2: Enabling L2 [ 21.718739] Feroceon L2: Cache support initialised. [ 21.721790] bio: create slab <bio-0> at 0 [ 21.722063] vgaarb: loaded [ 21.722340] SCSI subsystem initialized [ 21.722588] usbcore: registered new interface driver usbfs [ 21.722648] usbcore: registered new interface driver hub [ 21.722742] usbcore: registered new device driver usb [ 21.723179] Switching to clocksource orion_clocksource [ 21.728507] NET: Registered protocol family 2 [ 21.728768] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 21.729582] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 21.729681] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 21.729735] TCP: Hash tables configured (established 4096 bind 4096) [ 21.729744] TCP reno registered [ 21.729904] NET: Registered protocol family 1 [ 21.730197] RPC: Registered udp transport module. [ 21.730207] RPC: Registered tcp transport module. [ 21.730214] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.730359] NetWinder Floating Point Emulator V0.97 (double precision) [ 21.730610] audit: initializing netlink socket (disabled) [ 21.730641] type=2000 audit(0.241:1): initialized [ 21.737425] VFS: Disk quotas dquot_6.5.2 [ 21.737687] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.740279] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.741889] Registering the dns_resolver key type [ 21.741940] Slow work thread pool: Starting up [ 21.742058] Slow work thread pool: Ready [ 21.742067] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 21.742826] fuse init (API version 7.13) [ 21.743316] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 21.744853] msgmni has been set to 240 [ 21.746944] alg: No test for stdrng (krng) [ 21.747103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 21.747116] io scheduler noop registered [ 21.747124] io scheduler anticipatory registered [ 21.747132] io scheduler deadline registered [ 21.747393] io scheduler cfq registered (default) [ 21.753406] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 21.753865] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 22.133352] console [ttyS0] enabled [ 22.137436] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 22.146058] Scanning device for bad blocks [ 22.226076] Creating 3 MTD partitions on "orion_nand": [ 22.231248] 0x000000000000-0x000000100000 : "u-boot" [ 22.236817] 0x000000100000-0x000000500000 : "uImage" [ 22.242242] 0x000000500000-0x000010000000 : "root" [ 22.247935] UBI: attaching mtd2 to ubi0 [ 22.251789] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 22.258102] UBI: logical eraseblock size: 129024 bytes [ 22.263533] UBI: smallest flash I/O unit: 2048 [ 22.268257] UBI: sub-page size: 512 [ 22.272896] UBI: VID header offset: 512 (aligned 512) [ 22.278765] UBI: data offset: 2048 [ 22.333143] UBI error: ubi_scan_add_used: two LEBs with same sequence number 1 [ 22.340513] UBI error: ubi_init: cannot attach mtd2 [ 22.345545] UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 [ 22.352795] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 22.358576] mv643xx_eth smi: probed [ 22.363910] net eth0: port 0 with MAC address 00:10:75:1a:3d:0c [ 22.369928] console [netcon0] enabled [ 22.373621] netconsole: network logging started [ 22.378174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.384789] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 22.390084] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 22.423233] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 22.443216] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 22.449220] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.456060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.463325] usb usb1: Product: Marvell Orion EHCI [ 22.468051] usb usb1: Manufacturer: Linux 2.6.32.18-dockstar ehci_hcd [ 22.474529] usb usb1: SerialNumber: orion-ehci.0 [ 22.479488] usb usb1: configuration #1 chosen from 1 choice [ 22.485241] hub 1-0:1.0: USB hub found [ 22.489032] hub 1-0:1.0: 1 port detected [ 22.493271] Initializing USB Mass Storage driver... [ 22.498254] usbcore: registered new interface driver usb-storage [ 22.504311] USB Mass Storage support registered. [ 22.509161] mice: PS/2 mouse device common for all mice [ 22.514484] i2c /dev entries driver [ 22.518747] device-mapper: uevent: version 1.0.3 [ 22.523799] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 22.532364] cpuidle: using governor ladder [ 22.536628] cpuidle: using governor menu [ 22.540665] Registered led device: dockstar:green:health [ 22.546076] Registered led device: dockstar:orange:misc [ 22.551381] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 22.557803] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 22.603252] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 22.643246] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 22.683298] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 22.723247] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 22.729036] Netfilter messages via NETLINK v0.30. [ 22.733839] nf_conntrack version 0.5.0 (1921 buckets, 7684 max) [ 22.740284] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 22.747742] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 22.755707] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.764307] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.769702] TCP cubic registered [ 22.772946] NET: Registered protocol family 17 [ 22.777793] registered taskstats version 1 [ 22.782595] Initalizing network drop monitor service [ 22.787683] md: Waiting for all devices to be available before autodetect [ 22.794513] md: If you don't use raid, use raid=noautodetect [ 22.800588] md: Autodetecting RAID arrays. [ 22.804724] md: Scanned 0 and added 0 devices. [ 22.809184] md: autorun ... [ 22.811983] md: ... autorun DONE. [ 22.815348] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 22.822584] UBIFS error (pid 1): ubifs_get_sb: cannot open "ubi0:rootfs", error -19 [ 22.830320] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0) [ 22.837415] Please append a correct "root=" boot option; here are the available partitions: [ 22.845832] 1f00 1024 mtdblock0 (driver?) [ 22.850827] 1f01 4096 mtdblock1 (driver?) [ 22.855833] 1f02 257024 mtdblock2 (driver?) [ 22.860828] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 22.869162] [<c002eee4>] (unwind_backtrace+0x0/0xdc) from [<c04a31d4>] (panic+0x34/0x128) [ 22.877399] [<c04a31d4>] (panic+0x34/0x128) from [<c0008f5c>] (mount_block_root+0x25c/0x2b4) [ 22.885898] [<c0008f5c>] (mount_block_root+0x25c/0x2b4) from [<c00090b0>] (prepare_namespace+0x90/0x190) [ 22.895445] [<c00090b0>] (prepare_namespace+0x90/0x190) from [<c00085e0>] (kernel_init+0xf0/0x12c) [ 22.904466] [<c00085e0>] (kernel_init+0xf0/0x12c) from [<c0029e7c>] (kernel_thread_exit+0x0/0x8)
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 03:59AM |
Admin Registered: 14 years ago Posts: 19,302 |
setenv force_rescue_bootcmd 'if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi' setenv rescue_bootcmd 'if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi' setenv rescue_set_bootargs 'setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params' boot
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 09:07AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 10:48AM |
Admin Registered: 14 years ago Posts: 19,302 |
> setenv pogo_bootcmd 'if fsload > uboot-original-mtd0.kwb; then go 0x800200; fi' >
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 11:37AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 12:07PM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 09:30PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' no USB devices available Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' ** Bad device usb 0 ** ** Bad device usb 0 ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found ** Bad device usb 0 ** ** Bad device usb 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'mmc' - try 'help' ** Bad device mmc 0 ** ** Bad device mmc 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'ide' - try 'help' ** Bad device ide 0 ** ** Bad device ide 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Created: 2011-02-17 8:10:10 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux............................................................................................................................................................................................................. done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.18-dockstar (root@stfu.tcbnet) (gcc version 4.3.5 (Buildroot 2010.08) ) #1 Thu Feb 17 03:09:57 EST 2011 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate FreeAgent DockStar [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 128MB = 128MB total [ 0.000000] Memory: 122836KB available (5968K code, 708K data, 128K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 21.474969] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776) [ 21.714929] Security Framework initialized [ 21.714950] SELinux: Disabled at boot. [ 21.714978] Mount-cache hash table entries: 512 [ 21.715289] Initializing cgroup subsys ns [ 21.715305] Initializing cgroup subsys cpuacct [ 21.715315] Initializing cgroup subsys devices [ 21.715325] Initializing cgroup subsys freezer [ 21.715333] Initializing cgroup subsys net_cls [ 21.715380] CPU: Testing write buffer coherency: ok [ 21.716191] devtmpfs: initialized [ 21.717938] regulator: core version 0.5 [ 21.718167] NET: Registered protocol family 16 [ 21.718697] Kirkwood: MV88F6281-A0, TCLK=200000000. [ 21.718711] Feroceon L2: Enabling L2 [ 21.718747] Feroceon L2: Cache support initialised. [ 21.721795] bio: create slab <bio-0> at 0 [ 21.722068] vgaarb: loaded [ 21.722347] SCSI subsystem initialized [ 21.722595] usbcore: registered new interface driver usbfs [ 21.722656] usbcore: registered new interface driver hub [ 21.722748] usbcore: registered new device driver usb [ 21.723182] Switching to clocksource orion_clocksource [ 21.728515] NET: Registered protocol family 2 [ 21.728778] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 21.729594] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 21.729693] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 21.729746] TCP: Hash tables configured (established 4096 bind 4096) [ 21.729756] TCP reno registered [ 21.729916] NET: Registered protocol family 1 [ 21.730207] RPC: Registered udp transport module. [ 21.730216] RPC: Registered tcp transport module. [ 21.730224] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.730364] NetWinder Floating Point Emulator V0.97 (double precision) [ 21.730617] audit: initializing netlink socket (disabled) [ 21.730649] type=2000 audit(0.241:1): initialized [ 21.737433] VFS: Disk quotas dquot_6.5.2 [ 21.737692] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.740278] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.741886] Registering the dns_resolver key type [ 21.741937] Slow work thread pool: Starting up [ 21.742056] Slow work thread pool: Ready [ 21.742066] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 21.742828] fuse init (API version 7.13) [ 21.743319] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 21.744859] msgmni has been set to 240 [ 21.746947] alg: No test for stdrng (krng) [ 21.747101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 21.747114] io scheduler noop registered [ 21.747122] io scheduler anticipatory registered [ 21.747130] io scheduler deadline registered [ 21.747392] io scheduler cfq registered (default) [ 21.753405] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 21.753868] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 22.138764] console [ttyS0] enabled [ 22.142847] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit) [ 22.151470] Scanning device for bad blocks [ 22.231500] 4 cmdlinepart partitions found on MTD device orion_nand [ 22.237814] Creating 4 MTD partitions on "orion_nand": [ 22.242983] 0x000000000000-0x000000100000 : "u-boot" [ 22.248547] 0x000000100000-0x000000500000 : "uImage" [ 22.253999] 0x000000500000-0x000002500000 : "rootfs" [ 22.259454] 0x000002500000-0x000010000000 : "data" [ 22.265167] UBI: attaching mtd2 to ubi0 [ 22.269026] UBI: physical eraseblock size: 131072 bytes (128 KiB) [ 22.275339] UBI: logical eraseblock size: 129024 bytes [ 22.280760] UBI: smallest flash I/O unit: 2048 [ 22.285495] UBI: sub-page size: 512 [ 22.290134] UBI: VID header offset: 512 (aligned 512) [ 22.296002] UBI: data offset: 2048 [ 22.360441] UBI: attached mtd2 to ubi0 [ 22.364233] UBI: MTD device name: "rootfs" [ 22.369311] UBI: MTD device size: 32 MiB [ 22.374222] UBI: number of good PEBs: 256 [ 22.378859] UBI: number of bad PEBs: 0 [ 22.383332] UBI: max. allowed volumes: 128 [ 22.387972] UBI: wear-leveling threshold: 4096 [ 22.392697] UBI: number of internal volumes: 1 [ 22.397171] UBI: number of user volumes: 1 [ 22.401636] UBI: available PEBs: 0 [ 22.406109] UBI: total number of reserved PEBs: 256 [ 22.411010] UBI: number of PEBs reserved for bad PEB handling: 2 [ 22.417052] UBI: max/mean erase counter: 1/0 [ 22.421343] UBI: image sequence number: 1653365787 [ 22.426173] UBI: background thread "ubi_bgt0d" started, PID 38 [ 22.432199] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 22.437986] mv643xx_eth smi: probed [ 22.443316] net eth0: port 0 with MAC address 00:10:75:1a:3d:0c [ 22.449336] console [netcon0] enabled [ 22.453014] netconsole: network logging started [ 22.457584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.464189] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 22.469483] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 22.503234] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 22.523219] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 22.529223] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 22.536054] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 22.543320] usb usb1: Product: Marvell Orion EHCI [ 22.548045] usb usb1: Manufacturer: Linux 2.6.32.18-dockstar ehci_hcd [ 22.554524] usb usb1: SerialNumber: orion-ehci.0 [ 22.559435] usb usb1: configuration #1 chosen from 1 choice [ 22.565167] hub 1-0:1.0: USB hub found [ 22.568959] hub 1-0:1.0: 1 port detected [ 22.573128] Initializing USB Mass Storage driver... [ 22.578124] usbcore: registered new interface driver usb-storage [ 22.584183] USB Mass Storage support registered. [ 22.589020] mice: PS/2 mouse device common for all mice [ 22.594348] i2c /dev entries driver [ 22.598624] device-mapper: uevent: version 1.0.3 [ 22.603672] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 22.612237] cpuidle: using governor ladder [ 22.616501] cpuidle: using governor menu [ 22.620549] Registered led device: dockstar:green:health [ 22.625972] Registered led device: dockstar:orange:misc [ 22.631280] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 22.637694] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 22.683254] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 22.723251] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 22.763303] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 22.803250] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 22.809065] Netfilter messages via NETLINK v0.30. [ 22.813866] nf_conntrack version 0.5.0 (1921 buckets, 7684 max) [ 22.820305] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 22.827762] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 22.835728] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.844274] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.849659] TCP cubic registered [ 22.852897] NET: Registered protocol family 17 [ 22.857762] registered taskstats version 1 [ 22.862574] Initalizing network drop monitor service [ 22.867660] md: Waiting for all devices to be available before autodetect [ 22.874492] md: If you don't use raid, use raid=noautodetect [ 22.880570] md: Autodetecting RAID arrays. [ 22.884710] md: Scanned 0 and added 0 devices. [ 22.889170] md: autorun ... [ 22.891969] md: ... autorun DONE. [ 22.895333] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 23.006132] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 23.012176] UBIFS: mounted read-only [ 23.015790] UBIFS: file system size: 30836736 bytes (30114 KiB, 29 MiB, 239 LEBs) [ 23.023498] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) [ 23.030838] UBIFS: media format: w4/r0 (latest is w4/r0) [ 23.036705] UBIFS: default compressor: lzo [ 23.040821] UBIFS: reserved for root: 0 bytes (0 KiB) [ 23.046724] VFS: Mounted root (ubifs filesystem) readonly on device 0:16. [ 23.053649] Freeing init memory: 128K [ 23.086618] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 23.093376] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 23.100545] usb 1-1: Product: USB2.0 Hub INIT: [ 23.114121] usb 1-1: configuration #1 chosen from 1 choice [ 23.120378] hub 1-1:1.0: USB hub found [ 23.124497] hub 1-1:1.0: 4 ports detected version 2.86 booting mdev: /sys/class: No such file or directory Starting heartbeat LED... Populating /dev using udev: done Initializing random number generator... read-only file system detected...done Starting network... Starting Network Interface Plugging Daemon: eth0. Starting sshd: OK INIT: Entering runlevel: 2 Jeff Doozan's Dockstar/Pogoplug Recovery System rescue login: [ 25.902500] eth0: link up, 1000 Mb/s, full duplex, flow control disabled
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug January 30, 2015 11:03PM |
Admin Registered: 14 years ago Posts: 19,302 |
Quote
D.1 Modify u-boot envs:
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 02, 2015 09:38AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 02, 2015 10:54PM |
Admin Registered: 14 years ago Posts: 19,302 |
> fw_setenv devices usb >>
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 04, 2015 08:17PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar gcc (Debian 4.6.3-14) 4.6.3 GNU ld (GNU Binutils for Debian) 2.22 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' no USB devices available Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' ** Bad device usb 0 ** ** Bad device usb 0 ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found ** Bad device usb 0 ** ** Bad device usb 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'mmc' - try 'help' ** Bad device mmc 0 ** ** Bad device mmc 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! Unknown command 'ide' - try 'help' ** Bad device ide 0 ** ** Bad device ide 0 ** Wrong Image Format for bootm command ERROR: can't get kernel image! NAND read: device 0 offset 0x100000, size 0x400000 4194304 bytes read: OK ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32.18-dockstar Created: 2011-02-17 8:10:10 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3236180 Bytes = 3.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Starting kernel ...
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 05, 2015 01:20AM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 05, 2015 10:53AM |
Registered: 14 years ago Posts: 89 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 05, 2015 12:45PM |
Admin Registered: 14 years ago Posts: 19,302 |
> fw_setenv devices usb
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 05, 2015 11:11PM |
Registered: 14 years ago Posts: 89 |
U-Boot 2014.07-tld-2 (Sep 20 2014 - 01:10:10) Seagate FreeAgent DockStar gcc (Debian 4.6.3-14) 4.6.3 GNU ld (GNU Binutils for Debian) 2.22 Hit any key to stop autoboot: 0 (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 15122944 000e2f0c-01 83 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' ** File not found /rescueme ** ** Unrecognized filesystem type ** (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found 2832412 bytes read in 407 ms (6.6 MiB/s) 6114335 bytes read in 558 ms (10.4 MiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-3.17.0-kirkwood-tld-1 Created: 2015-01-23 4:55:43 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2832348 Bytes = 2.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-3.17.0-kirkwood-tld-1 Created: 2014-10-25 3:29:30 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6114271 Bytes = 5.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ...
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 05, 2015 11:12PM |
Registered: 14 years ago Posts: 89 |
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) baudrate=115200 bootcmd_mmc=run mmc_init; run set_bootargs_mmc; run mmc_boot bootcmd_sata=run sata_init; run set_bootargs_sata; run sata_boot; bootcmd_usb=run usb_init; run set_bootargs_usb; run usb_boot; bootdelay=10 console=ttyS0,115200 device=0:1 ethact=egiga0 led_error=orange blinking led_exit=green off led_init=green blinking mainlineLinux=yes mmc_boot=mw 0x800000 0 1; run mmc_load_uimage; if run mmc_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi mmc_init=mmc rescan mmc_load_uimage=ext2load mmc $device 0x800000 /boot/uImage mmc_load_uinitrd=ext2load mmc $device 0x1100000 /boot/uInitrd mmc_root=/dev/mmcblk0p1 mtdids=nand0=orion_nand partition=nand0,2 preboot_nc=run if_netconsole start_netconsole rootdelay=10 rootfstype=ext3 sata_boot=mw 0x800000 0 1; run sata_load_uimage; if run sata_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi sata_init=ide reset sata_load_uimage=ext2load ide $device 0x800000 /boot/uImage sata_load_uinitrd=ext2load ide $device 0x1100000 /boot/uInitrd sata_root=/dev/sda1 set_bootargs_mmc=setenv bootargs console=$console root=$mmc_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$rootdelay rootfstype=$rootfstype $mtdparts stderr=serial stdin=serial stdout=serial usb_boot=mw 0x800000 0 1; run usb_load_uimage; if run usb_load_uinitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_init=usb start usb_load_uimage=ext2load usb $device 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb $device 0x1100000 /boot/uInitrd usb_root=/dev/sda1 bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi uenv_import=echo importing envs ...; env import -t 0x810000 uenv_load=usb start; mmc rescan; ide reset; setenv uenv_loaded 0; for devtype in usb mmc ide; do for disknum in 0; do run uenv_read_disk; done; done uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x810000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi arcNumber=2998 ethaddr=00:10:75:1A:3D:0C serverip=192.168.2.106 ipaddr=192.168.2.108 force_rescue=0 rescue_installed=1 pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi bootcmd=run bootcmd_uenv; run force_rescue_bootcmd; run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; run rescue_bootcmd; reset force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params devices=usb if_netconsole=ping $serverip start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; preboot=run if_netconsole start_netconsole
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 06, 2015 01:37AM |
Admin Registered: 14 years ago Posts: 19,302 |
D.1 Modify u-boot envs:
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 07, 2015 11:03AM |
Registered: 10 years ago Posts: 429 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 07, 2015 11:57AM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 07, 2015 01:54PM |
Registered: 10 years ago Posts: 429 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 07, 2015 03:13PM |
Admin Registered: 14 years ago Posts: 19,302 |
Re: 2014.07 U-Boot for FDT and Non-FDT Kernel - GoFlexNet, GoFlexHome, PogoE02, Dockstar, iConnect, NetgearStora, PogoV4/Mobile, Sheevaplug February 10, 2015 11:29PM |
Registered: 14 years ago Posts: 89 |
> D.1 Modify u-boot envs: >>