Semi-bricked GoFlex Home in need of fixing May 06, 2013 04:33PM |
Registered: 11 years ago Posts: 2 |
U-Boot 2011.12 (Apr 18 2012 - 23:08:20) Seagate GoFlexNet SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Using egiga0 device ping failed; host 10.10.10.5 is not alive Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed ** Bad partition 1 ** ** Bad partition 1 ** Wrong Image Format for bootm command ERROR: can't get kernel image! (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found ** Block device usb 0 not supported ** Invalid boot device ** Creating 1 MTD partitions on "nand0": 0x000002500000-0x000010000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI error: validate_ec_hdr: bad VID header offset 2048, expected 512 UBI error: validate_ec_hdr: bad EC header UBI error: ubi_io_read_ec_hdr: validation failed for PEB 0 UBI error: ubi_init: cannot attach mtd1 UBI error: ubi_init: UBI error: cannot initialize UBI, error -22 UBI init error 22 ** Block device usb 0 not supported ** Block device usb 1 not supported ** Block device usb 2 not supported ** Block device usb 3 not supported ** Block device usb 0 not supported ** Block device usb 0 not supported Wrong Image Format for bootm command ERROR: can't get kernel image! stopping USB.. ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS: done. find_inode failed for name=uboot-original-mtd0.kwb load: Failed to find inode ### JFFS2 LOAD ERROR<0> for uboot-original-mtd0.kwb! ### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000 Scanning JFFS2 FS:
Re: Semi-bricked GoFlex Home in need of fixing May 07, 2013 12:14AM |
Admin Registered: 13 years ago Posts: 18,623 |
Re: Semi-bricked GoFlex Home in need of fixing May 07, 2013 06:21AM |
Registered: 11 years ago Posts: 2 |