howto write uboot to nand
June 28, 2013 01:59PM
I thought I should ask before I screw this up. I have a new uboot that I load with kwboot. It works fine and I want to write it to nand. I see many references to write it after loading with tftp but not kwboot. Can I do this? How? This is to a Guruplug.

Re: howto write uboot to nand
June 28, 2013 11:42PM
You can do this. But first you will need to verify if the Guruplug mtd0 has stock uBoot in the similar way the other plugs have. And flash it in a similar fashion as described in this thread:,11663

I don't recall reading about Guruplug in this forum. So I really can't say whether the same procedure will apply. So please use your own judgment.

Forum Wiki
bodhi's corner (buy bodhi a beer)

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.