Not possible to interrupt the Autoboot - NSA320

Hey i have a serial cable (ca42) and i have get an output. but the problem is i cant send any key to the device to interrupt the auto boot.

i have used minicom and putty on two different laptops but no luck :-( any advice for me?

thank you very much!

syro Wrote:
-------------------------------------------------------
> Hey i have a serial cable (ca42) and i have get an
> output. but the problem is i cant send any key to
> the device to interrupt the auto boot.
>
> i have used minicom and putty on two different
> laptops but no luck :-( any advice for me?
>
> thank you very much!

Try connecting the TX wire to the RX wire to see what you type is echoed back. So you'll know your CA42 cable or NSA320 serial port end is at fault.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> syro Wrote:
> --------------------------------------------------
> -----
> > Hey i have a serial cable (ca42) and i have get
> an
> > output. but the problem is i cant send any key
> to
> > the device to interrupt the auto boot.
> >
> > i have used minicom and putty on two different
> > laptops but no luck :-( any advice for me?
> >
> > thank you very much!
>
> Try connecting the TX wire to the RX wire to see
> what you type is echoed back. So you'll know your
> CA42 cable or NSA320 serial port end is at fault.


Thank you very much :-)

doesn't work, as it is altered during boot when running usb_scan. You need to hardcode it in usb_set_bootargs

testking testking
actualtests microsoft certification braindumpss actualtests microsoft certification braindumpss
actualtests 642-165 braindumps actualtests 642-165 braindumps
actualtests network+ certification braindumps actualtests network+ certification braindumps