Forum List Message List New Topic
fma965
Go Flex Home, Won't Boot Anything, No Serial, HELP!
November 10, 2013 09:59AM
Ok i'm not really sure how to explain my problem,

No LED's are on, Except for the network LED.

No Serial output,

Visit : http://archlinuxarm.org/forum/viewtopic.php?f=58&t=6048 for the full story.

Additionaly: i tried 
fma965@ubuntu:~/Desktop/kwboot-tool$ sudo ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.uart
Sending boot message. Please reboot the target.../

But didn't get anything working. Any help will be great. Thanks.
Reply Quote
bodhi
Re: Go Flex Home, Won't Boot Anything, No Serial, HELP!
November 12, 2013 05:57PM
There is not enough info here to undestand your problem!
Have you connected this serial converter to any other boxes to verify that it's working?
Reply Quote
fma965
Re: Go Flex Home, Won't Boot Anything, No Serial, HELP!
November 30, 2013 11:37AM
sorry late reply, since i got a nsa320 not bothered checking on the go flex home, however now i can confirm the serial adapter does work as i use it on the nsa320, thanks.
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: