Welcome! Log In Create A New Profile


doimage source code

Posted by Johns 
doimage source code
August 09, 2010 12:35PM
Hello Jeff,

Good work.

I have successful installed the mtd0 u-boot and boot gentoo from usb and a buildroot recovery image from mtd2.

But I can't compile the new u-boot with gentoo, the doimage from the tutorial is X86 only.
Can you please post the sources.

Re: doimage source code
August 09, 2010 12:42PM
doimage is part of the old uBoot. The sources are in the links to the old uBoot at the bottom of the uBoot page. If you follow the instructions for building the old uBoot, you'll get a compiled doimage in the tools/ directory.

-- Jeff
Re: doimage source code
August 10, 2010 08:30AM

Works like a charm.

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.