|
Re: No serial output from kernel on Iomega ix2-dl(ng) June 23, 2019 07:18AM |
Registered: 6 years ago Posts: 3 |
Hey guys,
Based on sarcastic.mannequin's ix2-ng device tree I managed to create one for the ix2-dl (the one with 1GB mtd) - see attached. I'm running OpenWRT on the ix2-dl for a few months now and it runs very well and stable. (btw it's great to be able to run the system from mtd, that way the HDDs can be spinned down when not actively used for file transfer)
(side note: to be able to use bodhi's kernel with this device tree the kernel and initrd partitions should be merged so the larger kernel will still fit; as the OpenWRT kernel is significantly smaller no change is needed for that)
Happy hacking! \m/
Based on sarcastic.mannequin's ix2-ng device tree I managed to create one for the ix2-dl (the one with 1GB mtd) - see attached. I'm running OpenWRT on the ix2-dl for a few months now and it runs very well and stable. (btw it's great to be able to run the system from mtd, that way the HDDs can be spinned down when not actively used for file transfer)
(side note: to be able to use bodhi's kernel with this device tree the kernel and initrd partitions should be merged so the larger kernel will still fit; as the OpenWRT kernel is significantly smaller no change is needed for that)
Happy hacking! \m/
|
aosog
Re: No serial output from kernel on Iomega ix2-dl(ng) September 24, 2019 02:22PM |
