[Firmware utilities ompatibility] OXNAS vs. Marvel Kirkwood

I was perusing this Hacking the Pogoplug v3/Oxnas (Pro/Classic) with Debian blog and noticed the download firmware utilities links reference to http://download.qnology.com/pogoplug/v4. AFAIK, PogoPlug V4 is a Marvel Kirkwood and not OXNAS platform. So, how is the compatibility between the two platforms? In other words, will the firmware tools from a Marvel Kirkwood run correctly on an OXNAS platform?

Yes the firmware tools are compatible and I've tested it. Otherwise, I would not have published the tutorial.

Was considering moving the tools to a more generic folder name to avoid this confusion/concern, but was too lazy.

-grayman4hire
======================================
Pogoplug V2 and V3 Serial Connection
Tutorial - Pogoplug v4 (Series 4 and Mobile) with Linux (Debian or Arch)
OpenWRT on Pogoplug Mobile
Tutorial - Pogoplug E02/V4 with Arch Linux ARM
Hacking the Pogoplug v3/Oxnas (Pro/Classic) with Debian
OpenWRT on Pogoplug v3/Oxnas (Pro/Classic)

@grayman4hire - Thanks for the clarification.

Explanation: eventhough Oxnas is v6, you are running ARMv5 rootfs on both boxes. So the binaries compiled on Kirkwood work the same way on both rootfs.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Bodhi,

That makes sense. Thank you.