uBoot update script - PogoplugPro ... ?

Before I brick my device - does the uBoot update script mentioned here work for a PogoplugPro?
When I run it, it explicitely says:

This installer will only work on the following devices:
Seagate Dockstar
Seagate GoFlex Net
Seagate GoFlex Home
Pogoplug v1
Pogoplug Pink (v2)
Do not run this installer on any other device.

My uname -a says:
Linux PogoplugPro 2.6.31.6_SMP_820 #96 SMP Tue Feb 8 10:06:27 PST 2011 armv6l GNU/Linux

zwalex Wrote:
-------------------------------------------------------
> Before I brick my device - does the uBoot update
> script mentioned
> here
> work for a PogoplugPro?
> When I run it, it explicitely says:
>
> This installer will only work on the following
> devices:
> Seagate Dockstar
> Seagate GoFlex Net
> Seagate GoFlex Home
> Pogoplug v1
> Pogoplug Pink (v2)
> Do not run this installer on any other device.
>
> My uname -a says:
> Linux PogoplugPro 2.6.31.6_SMP_820 #96 SMP Tue Feb
> 8 10:06:27 PST 2011 armv6l GNU/Linux

No, the script does not work for Pogo Pro.

Look in my signature for the right u-boot (one of the sticky threads).

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 05/30/2015 07:24PM by bodhi.

Thanks bodhi!
Is it this thread?
It's a little bit over my head ... I am glad I came so far, but I was hoping there is a script for the uBoot update for the V3 devices as there is one for the others ...

Checking the above thread step by step.
My /etc/myd looks like this:

/tmp # cat /proc/mtd
dev: size erasesize name
mtd0: 08000000 00020000 "NAND 128MiB 3,3V 8-bit"
mtd1: 00e00000 00020000 "boot"
mtd2: 07200000 00020000 "rootfs"



Edited 2 time(s). Last edit at 05/30/2015 08:00PM by zwalex.

OK ... I am getting confused about what I need to do in what order, etc.
I will start another thread in the Debian section, because that's what I eventually want to do.