Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing February 29, 2016 05:14PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing February 29, 2016 05:25PM |
Admin Registered: 13 years ago Posts: 18,591 |
poke ide reset sleep 60 usb start
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 01, 2016 07:47AM |
Registered: 8 years ago Posts: 59 |
root@debian:~# dmesg | grep -i SATA [ 2.626551] sata_mv f1080000.sata: version 1.28 [ 2.626885] sata_mv f1080000.sata: slots 32 ports 2 [ 2.703914] scsi host0: sata_mv [ 2.723822] scsi host1: sata_mv [ 2.727368] ata1: SATA max UDMA/133 irq 32 [ 2.731448] ata2: SATA max UDMA/133 irq 32 [ 3.274195] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 3.873696] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR vfs_mountroot: can't open root device
run poke; ide reset; sleep 60; usb start; fatload usb 0 0x800000 /netbsd.ub; bootm 0x800000 Reset IDE: Bus 0: OK Bus 1: .......OK Device 0: Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80 Ser#: WD-WCC4MHECYZUX Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) Device 1: Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80 Ser#: WD-WCC4MCY6Y4AH Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 4 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 45 second(s) Use USB retry period from the environment: 45 second(s) 2 Storage Device(s) found reading /netbsd.ub 4452292 bytes read in 181 ms (23.5 MiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: NetBSD/ 7.99.26 Created: 2016-01-31 11:16:27 UTC Image Type: ARM NetBSD Kernel Image (uncompressed) Data Size: 4452228 Bytes = 4.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK ## Transferring control to NetBSD stage-2 loader (at address 00008000) ... NetBSD/evbarm (Marvell) booting ... [ Kernel symbol table missing! ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.26 (NSA320s) #1: Sun Jan 31 11:15:46 GMT 2016 michael@odroid:/home/michael/src/netbsd/sys/arch/evbarm/compile/obj/NSA320s total memory = 256 MB avail memory = 245 MB sysctl_createv: sysctl_create(machine_arch) returned 17 mainbus0 (root) cpu0 at mainbus0 core 0: Sheeva 88SV131 rev 1 (ARM9E-S V5TE core) cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled cpu0: 16KB/32B 4-way L1 VIVT Instruction cache cpu0: 16KB/32B 4-way write-back-locking-C L1 VIVT Data cache mvsoc0 at mainbus0: Marvell 88F619x Rev. A1 Kirkwood mvsoc0: CPU Clock 1000.000 MHz SysClock 400.000 MHz TClock 166.666 MHz mvsoctmr0 at mvsoc0 unit 0 offset 0x20300-0x203ff irq 65: Marvell SoC Timer mvsocgpp0 at mvsoc0 unit 0 offset 0x10100-0x101ff irq 35: Marvell SoC General Purpose I/O Port Interface mvsocgpp0: 36 gpio pins mvsocgpp0: interrupts 96..103, intr 35 mvsocgpp0: interrupts 104..111, intr 36 mvsocgpp0: interrupts 112..119, intr 37 mvsocgpp0: interrupts 120..127, intr 38 mvsocgpp0: interrupts 128..135, intr 39 mvsocgpp0: Data Out: 0x00200000 mvsocgpp0: Data Out Enable Control: 0xc70e0ffd mvsocgpp0: Data Blink Enable: 0x10000000 mvsocgpp0: Data In Polarity: 0x00000000 mvsocgpp0: Data In: 0x13020080 mvsocgpp0: Interrupt Cause: 0x00000000 mvsocgpp0: Interrupt Mask: 0x00000000 mvsocgpp0: Interrupt Level Mask: 0x00000000 mvsocgpp0: High Data Out: 0x00000002 mvsocgpp0: High Data Out Enable Ctrl: 0xfffffff9 mvsocgpp0: High Blink Enable: 0x00000000 mvsocgpp0: High Data In Polarity: 0x00000000 mvsocgpp0: High Data In: 0x00000002 mvsocgpp0: High Interrupt Cause: 0x00000000 mvsocgpp0: High Interrupt Mask: 0x00000000 mvsocgpp0: High Interrupt Level Mask: 0x00000000 gpio0 at mvsocgpp0: 36 pins mvsocrtc0 at mvsoc0 unit 0 offset 0x10300-0x10317: Marvell SoC Real Time Clock com0 at mvsoc0 unit 0 offset 0x12000-0x1201f irq 33: ns16550a, working fifo com0: console com1 at mvsoc0 unit 1 offset 0x12100-0x1211f irq 34: ns16550a, working fifo ehci0 at mvsoc0 unit 0 offset 0x50000-0x50fff irq 19: Marvell USB 2.0 Interface usb0 at ehci0: USB revision 2.0 gtidmac0 at mvsoc0 unit 0 offset 0x60000-0x60fff: Marvell IDMA Controller/XOR Engine gtidmac0: XOR Engine 4 channels, intr 5...8 gttwsi0 at mvsoc0 unit 0 offset 0x11000-0x110ff irq 29: Marvell TWSI controller iic0 at gttwsi0: I2C bus mvcesa0 at mvsoc0 unit 0 offset 0x3d000-0x3dfff irq 22: Marvell Cryptographic Engines and Security Accelerator mvgbec0 at mvsoc0 unit 0 offset 0x70000-0x73fff: Marvell Gigabit Ethernet Controller mvgbe0 at mvgbec0 port 0 irq 11 mvgbe0: Ethernet address 5c:f4:ab:df:0a:e0 makphy0 at mvgbe0 phy 1: Marvell 88E1116R Gigabit PHY, rev. 0 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mvgbec1 at mvsoc0 unit 1 offset 0x74000-0x77fff: Marvell Gigabit Ethernet Controller mvgbe at mvgbec1 port 0 not configured mvpex0 at mvsoc0 unit 0 offset 0x40000-0x41fff irq 9: Marvell PCI Express Interface pci0 at mvpex0 vendor 11ab product 6281 (miscellaneous memory, revision 0x03) at pci0 dev 0 function 0 not configured mvsata0 at mvsoc0 unit 0 offset 0x80000-0x87fff irq 21: Marvell Serial-ATA Host Controller (SATAHC) mvsata0: GenIIe, 1hc, 2port/hc atabus0 at mvsata0 channel 0 atabus1 at mvsata0 channel 1 mvsdio at mvsoc0 unit 0 not configured uhub0 at usb0: Marvell EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 mvsata0 port 0: device present, speed: 3.0Gb/s mvsata0 port 1: device present, speed: 3.0Gb/s wd0 at atabus0 drive 0 wd0: <WDC WD20EZRX-00D8PB0> wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors wd1 at atabus1 drive 0 wd1: <WDC WD20EZRX-00D8PB0> wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors uhub1 at uhub0 port 1: Genesys Logic USB2.0 Hub, class 9/0, rev 2.00/85.32, addr 2 uhub1: single transaction translator umass0 at uhub1 port 2 configuration 1 interface 0 umass0: Kingston DataTraveler 2.0, rev 2.00/2.00, addr 3 scsibus0 at umass0: 2 targets, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, 0000> disk removable sd0: fabricating a geometry sd0: 14782 MB, 14782 cyl, 64 head, 32 sec, 512 bytes/sect x 30273600 sectors sd0: fabricating a geometry umass1 at uhub1 port 3 configuration 1 interface 0 umass1: HP v210w, rev 2.00/0.00, addr 4 scsibus1 at umass1: 2 targets, 1 lun per target sd1 at scsibus1 target 0 lun 0: <hp, v210w, 1.00> disk removable sd1: 15300 MB, 3936 cyl, 16 head, 32 sec, 512 bytes/sect x 31334400 sectors umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR (repeat until) umass1: BBB reset failed, IOERROR umass1: BBB bulk-in clear stall failed, IOERROR umass1: BBB bulk-out clear stall failed, IOERROR (repeat until) boot device: <unknown> root on sd0a dumps on sd0b umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR (repeat until) vfs_mountroot: can't open root device cannot mount root, error = 5 root device (default sd0a):
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 01, 2016 01:21PM |
Admin Registered: 13 years ago Posts: 18,591 |
Quote
> With 2 HHDs, doing
> run poke; ide reset; sleep 60; usb start
>
> Launch Debian (the macro scan_disk includes "ide
> reset") - looks OK:
> root@debian:~# dmesg | grep -i SATA
> [ 2.626551] sata_mv f1080000.sata: version
> 1.28
> [ 2.626885] sata_mv f1080000.sata: slots 32
> ports 2
> [ 2.703914] scsi host0: sata_mv
> [ 2.723822] scsi host1: sata_mv
> [ 2.727368] ata1: SATA max UDMA/133 irq 32
> [ 2.731448] ata2: SATA max UDMA/133 irq 32
> [ 3.274195] ata1: SATA link up 3.0 Gbps
> (SStatus 123 SControl F300)
> [ 3.873696] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl F300)
Quote
> Boot ok until it detects the USB root drive and
> then fails as previously:
> umass0: BBB reset failed, IOERROR
> umass0: BBB bulk-in clear stall failed, IOERROR
> umass0: BBB bulk-out clear stall failed, IOERROR
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 01, 2016 02:07PM |
Registered: 8 years ago Posts: 59 |
Quote
So did it boot all the way to the Debian prompt here?
Quote
Have you tried a different USB flash drive? what brand are you using?
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 01, 2016 03:19PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 01, 2016 03:54PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 04, 2016 11:51AM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 04, 2016 05:02PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 04, 2016 05:44PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 04, 2016 06:15PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 05, 2016 12:51PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 05, 2016 03:35PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 06, 2016 03:34PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 06, 2016 04:22PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 09, 2016 05:56PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 09, 2016 06:52PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 10, 2016 01:15AM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 10, 2016 02:27AM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 13, 2016 01:58AM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 13, 2016 12:17PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 13, 2016 03:25PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 13, 2016 07:23PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 15, 2016 01:56PM |
Registered: 8 years ago Posts: 59 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 17, 2016 12:42AM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 18, 2016 04:39PM |
Registered: 8 years ago Posts: 59 |
U-Boot 2015.10-tld-2-rc3 (Mar 13 2016 - 17:12:52 -0700) ZyXEL NSA310S/320S 1/2-Bay Power Media Server SoC: Kirkwood 88F6702_A1 DRAM: 256 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 running scan_disk ... Scan device usb starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 45 second(s) 1 Storage Device(s) found device usb 0:1 reading /boot/uImage ** Unable to read file /boot/uImage ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: Bus 0: OK Bus 1: not available Device 0: Model: WDC WD20EZRX-00D8PB0 Firm: 80.00A80 Ser#: WD-WCC4MHECYZUX Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) device ide 0:1 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** device ide 1:1 ** Bad device ide 1 ** device ide 2:1 ** Bad device ide 2 ** device ide 3:1 ** Bad device ide 3 ** reading /netbsd.ub 4452292 bytes read in 181 ms (23.5 MiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: NetBSD/ 7.99.26 Created: 2016-01-31 11:16:27 UTC Image Type: ARM NetBSD Kernel Image (uncompressed) Data Size: 4452228 Bytes = 4.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK ## Transferring control to NetBSD stage-2 loader (at address 00008000) ... NetBSD/evbarm (Marvell) booting ... [ Kernel symbol table missing! ] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 7.99.26 (NSA320s) #1: Sun Jan 31 11:15:46 GMT 2016 michael@odroid:/home/michael/src/netbsd/sys/arch/evbarm/compile/obj/NSA320s total memory = 256 MB avail memory = 245 MB sysctl_createv: sysctl_create(machine_arch) returned 17 mainbus0 (root) [...] sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 2.0, 0000> disk removable sd0: fabricating a geometry sd0: 14782 MB, 14782 cyl, 64 head, 32 sec, 512 bytes/sect x 30273600 sectors sd0: fabricating a geometry umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR [...] vfs_mountroot: can't open root device cannot mount root, error = 5 root device (default sd0a):
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 18, 2016 05:24PM |
Admin Registered: 13 years ago Posts: 18,591 |
Re: Zyxel NSA3x0S u-boot-2014.07-tld-4 for testing March 22, 2016 05:55PM |
Registered: 8 years ago Posts: 59 |