same, I keep trying 2 different USB sticks just in case I have bad tech. or something...
U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM
Pogo E02
SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 2048 1968128 c3072e18-01 83 Boot
Attempting to boot from usb 0:1...
745 bytes read in 290 ms (2 KiB/s)
Importing environment (uEnv.txt)...
Checking if uenvcmd is set ...
Running default loadzimage ...
** File not found /boot/zImage **
Running default loaduimage ...
2877273 bytes read in 465 ms (5.9 MiB/s)
Running loadfdt ...
10228 bytes read in 978 ms (9.8 KiB/s)
Running loaduinitrd ...
6535284 bytes read in 671 ms (9.3 MiB/s)
Running loaduimage ...
2877273 bytes read in 464 ms (5.9 MiB/s)
Booting from usb 0:1 ...
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.18.5-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2877209 Bytes = 2.7 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-3.18.5-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6535220 Bytes = 6.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Loading Kernel Image ... OK
Loading Ramdisk to 0f4e7000, end 0fb22834 ... OK
Loading Device Tree to 0f4e1000, end 0f4e67f3 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Thu Feb 5 17:58:07 PST 2015
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Seagate GoFlex Net
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 121320K/131072K available (5640K kernel code, 365K rwdata, 1920K rodata, 268K init, 305K bss, 9752K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc076a240 (7561 kB)
[ 0.000000] .init : 0xc076b000 - 0xc07ae000 ( 268 kB)
[ 0.000000] .data : 0xc07ae000 - 0xc08096fc ( 366 kB)
[ 0.000000] .bss : 0xc08096fc - 0xc0855d84 ( 306 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000016] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 0.008355] Console: colour dummy device 80x30
[ 0.012928] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.100935] pid_max: default: 32768 minimum: 301
[ 0.105786] Security Framework initialized
[ 0.110130] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.116871] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.124819] Initializing cgroup subsys devices
[ 0.129442] Initializing cgroup subsys freezer
[ 0.134023] Initializing cgroup subsys net_cls
[ 0.138630] Initializing cgroup subsys blkio
[ 0.143108] CPU: Testing write buffer coherency: ok
[ 0.148587] Setting up static identity map for 0x557418 - 0x557470
[ 0.155175] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[ 0.162934] devtmpfs: initialized
[ 0.169102] prandom: seed boundary self test passed
[ 0.178176] prandom: 100 self tests passed
[ 0.182393] pinctrl core: initialized pinctrl subsystem
[ 0.188286] regulator-dummy: no parameters
[ 0.197082] NET: Registered protocol family 16
[ 0.202116] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.238056] cpuidle: using governor ladder
[ 0.268053] cpuidle: using governor menu
[ 0.272483] Feroceon L2: Enabling L2
[ 0.276200] Feroceon L2: Cache support initialised.
[ 0.281620] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.296585] No ATAGs?
[ 0.329760] vgaarb: loaded
[ 0.333205] usbcore: registered new interface driver usbfs
[ 0.338929] usbcore: registered new interface driver hub
[ 0.344427] usbcore: registered new device driver usb
[ 0.350687] Switched to clocksource orion_clocksource
[ 0.394334] NET: Registered protocol family 2
[ 0.399549] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.406780] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.413286] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.419817] TCP: reno registered
[ 0.423176] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.429133] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.435735] NET: Registered protocol family 1
[ 0.440510] RPC: Registered named UNIX socket transport module.
[ 0.446591] RPC: Registered udp transport module.
[ 0.451418] RPC: Registered tcp transport module.
[ 0.456229] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.463156] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.471161] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.477388] Initialise system trusted keyring
[ 0.482018] audit: initializing netlink subsys (disabled)
[ 0.487570] audit: type=2000 audit(0.470:1): initialized
[ 0.493809] zpool: loaded
[ 0.496538] zbud: loaded
[ 0.499480] VFS: Disk quotas dquot_6.5.2
[ 0.503599] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.510865] NFS: Registering the id_resolver key type
[ 0.516062] Key type id_resolver registered
[ 0.520347] Key type id_legacy registered
[ 0.524520] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.531364] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.538040] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.545561] msgmni has been set to 236
[ 0.549557] Key type big_key registered
[ 0.556418] alg: No test for stdrng (krng)
[ 0.560656] Key type asymmetric registered
[ 0.564968] Asymmetric key parser 'x509' registered
[ 0.570042] bounce: pool size: 64 pages
[ 0.574126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.581750] io scheduler noop registered
[ 0.585782] io scheduler deadline registered
[ 0.590214] io scheduler cfq registered (default)
[ 0.596390] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.604538] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
[ 0.611993] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated
[ 0.619515] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.660757] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
[ 0.700753] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
[ 0.706445] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.750752] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
[ 0.790752] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
[ 0.796678] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.804523] console [ttyS0] disabled
[ 0.808256] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 0.817439] console [ttyS0] enabled
[ 0.817439] console [ttyS0] enabled
[ 0.824572] bootconsole [earlycon0] disabled
[ 0.824572] bootconsole [earlycon0] disabled
[ 0.834790] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 0.841209] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 0.845850] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.851562] Scanning device for bad blocks
[ 0.871268] Bad eraseblock 146 at 0x000001240000
[ 0.876915] Bad eraseblock 156 at 0x000001380000
[ 0.910197] Bad eraseblock 426 at 0x000003540000
[ 0.925108] Bad eraseblock 523 at 0x000004160000
[ 0.935016] Bad eraseblock 573 at 0x0000047a0000
[ 0.962463] Bad eraseblock 788 at 0x000006280000
[ 0.987776] Bad eraseblock 983 at 0x000007ae0000
[ 0.998349] libphy: Fixed MDIO Bus: probed
[ 1.002845] libphy: orion_mdio_bus: probed
[ 1.007736] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.091413] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:00:99:a3
[ 2.100378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.106976] ehci-pci: EHCI PCI platform driver
[ 2.111535] ehci-orion: EHCI orion driver
[ 2.115738] orion-ehci f1050000.ehci: EHCI Host Controller
[ 2.121311] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 2.129148] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[ 2.150723] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 2.156957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.163802] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.171075] usb usb1: Product: EHCI Host Controller
[ 2.175974] usb usb1: Manufacturer: Linux 3.18.5-kirkwood-tld-1 ehci_hcd
[ 2.182724] usb usb1: SerialNumber: f1050000.ehci
[ 2.188189] hub 1-0:1.0: USB hub found
[ 2.192045] hub 1-0:1.0: 1 port detected
[ 2.196863] mousedev: PS/2 mouse device common for all mice
[ 2.510750] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 2.662407] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.669157] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.676363] usb 1-1: Product: USB2.0 Hub
[ 2.681254] hub 1-1:1.0: USB hub found
[ 2.685406] hub 1-1:1.0: 4 ports detected
[ 2.971033] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[ 3.083028] usb 1-1.3: New USB device found, idVendor=090c, idProduct=1000
[ 3.089949] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.210718] rtc-mv f1010300.rtc: internal RTC not ticking
[ 3.216357] i2c /dev entries driver
[ 3.222402] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.228221] drop_monitor: Initializing network drop monitor service
[ 3.234790] TCP: cubic registered
[ 3.238129] NET: Registered protocol family 17
[ 3.242749] Key type dns_resolver registered
[ 3.247877] Loading compiled-in X.509 certificates
[ 3.252754] registered taskstats version 1
[ 3.257858] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.265685] Waiting 10 sec before mounting root device...
[ 13.280892] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
[ 13.288235] Please append a correct "root=" boot option; here are the available partitions:
[ 13.296682] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 13.304990] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.5-kirkwood-tld-1 #1
[ 13.312095] [<c0014aa0>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14)
[ 13.319883] [<c00110d4>] (show_stack) from [<c054f408>] (panic+0x80/0x208)
[ 13.326798] [<c054f408>] (panic) from [<c076c200>] (mount_block_root+0x200/0x248)
[ 13.334318] [<c076c200>] (mount_block_root) from [<c076c32c>] (mount_root+0xe4/0x10c)
[ 13.342182] [<c076c32c>] (mount_root) from [<c076c478>] (prepare_namespace+0x124/0x184)
[ 13.350223] [<c076c478>] (prepare_namespace) from [<c076be2c>] (kernel_init_freeable+0x1f8/0x240)
[ 13.359134] [<c076be2c>] (kernel_init_freeable) from [<c054e500>] (kernel_init+0x8/0xe4)
[ 13.367261] [<c054e500>] (kernel_init) from [<c000e310>] (ret_from_fork+0x14/0x24)
[ 13.374865] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 80.300713] random: nonblocking pool is initialized
U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM
Pogo E02
SoC: Kirkwood 88F6281_A0
DRAM: 256 MiB
WARNING: Caches not enabled
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: egiga0
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 2048 1955840 0049d569-01 83 Boot
Attempting to boot from usb 0:1...
745 bytes read in 308 ms (2 KiB/s)
Importing environment (uEnv.txt)...
Checking if uenvcmd is set ...
Running default loadzimage ...
** File not found /boot/zImage **
Running default loaduimage ...
2877273 bytes read in 438 ms (6.3 MiB/s)
Running loadfdt ...
10228 bytes read in 998 ms (9.8 KiB/s)
Running loaduinitrd ...
6535284 bytes read in 608 ms (10.3 MiB/s)
Running loaduimage ...
2877273 bytes read in 438 ms (6.3 MiB/s)
Booting from usb 0:1 ...
## Booting kernel from Legacy Image at 00800000 ...
Image Name: Linux-3.18.5-kirkwood-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2877209 Bytes = 2.7 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
Image Name: initramfs-3.18.5-kirkwood-tld-1
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 6535220 Bytes = 6.2 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01c00000
Booting using the fdt blob at 0x1c00000
Loading Kernel Image ... OK
Loading Ramdisk to 0f4e7000, end 0fb22834 ... OK
Loading Device Tree to 0f4e1000, end 0f4e67f3 ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.5-kirkwood-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 PREEMPT Thu Feb 5 17:58:07 PST 2015
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Seagate GoFlex Net
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 121320K/131072K available (5640K kernel code, 365K rwdata, 1920K rodata, 268K init, 305K bss, 9752K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc076a240 (7561 kB)
[ 0.000000] .init : 0xc076b000 - 0xc07ae000 ( 268 kB)
[ 0.000000] .data : 0xc07ae000 - 0xc08096fc ( 366 kB)
[ 0.000000] .bss : 0xc08096fc - 0xc0855d84 ( 306 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000016] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 0.008354] Console: colour dummy device 80x30
[ 0.012927] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.100944] pid_max: default: 32768 minimum: 301
[ 0.105796] Security Framework initialized
[ 0.110137] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.116879] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.124825] Initializing cgroup subsys devices
[ 0.129449] Initializing cgroup subsys freezer
[ 0.134022] Initializing cgroup subsys net_cls
[ 0.138630] Initializing cgroup subsys blkio
[ 0.143106] CPU: Testing write buffer coherency: ok
[ 0.148587] Setting up static identity map for 0x557418 - 0x557470
[ 0.155174] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2
[ 0.162933] devtmpfs: initialized
[ 0.169106] prandom: seed boundary self test passed
[ 0.178185] prandom: 100 self tests passed
[ 0.182410] pinctrl core: initialized pinctrl subsystem
[ 0.188299] regulator-dummy: no parameters
[ 0.197101] NET: Registered protocol family 16
[ 0.202133] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.238055] cpuidle: using governor ladder
[ 0.268051] cpuidle: using governor menu
[ 0.272482] Feroceon L2: Enabling L2
[ 0.276198] Feroceon L2: Cache support initialised.
[ 0.281619] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
[ 0.296583] No ATAGs?
[ 0.329755] vgaarb: loaded
[ 0.333204] usbcore: registered new interface driver usbfs
[ 0.338929] usbcore: registered new interface driver hub
[ 0.344425] usbcore: registered new device driver usb
[ 0.350686] Switched to clocksource orion_clocksource
[ 0.394354] NET: Registered protocol family 2
[ 0.399575] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.406808] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.413311] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.419843] TCP: reno registered
[ 0.423201] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.429157] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.435761] NET: Registered protocol family 1
[ 0.440543] RPC: Registered named UNIX socket transport module.
[ 0.446626] RPC: Registered udp transport module.
[ 0.451460] RPC: Registered tcp transport module.
[ 0.456271] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.463199] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.471209] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.477437] Initialise system trusted keyring
[ 0.482067] audit: initializing netlink subsys (disabled)
[ 0.487622] audit: type=2000 audit(0.470:1): initialized
[ 0.493861] zpool: loaded
[ 0.496589] zbud: loaded
[ 0.499529] VFS: Disk quotas dquot_6.5.2
[ 0.503650] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.510921] NFS: Registering the id_resolver key type
[ 0.516112] Key type id_resolver registered
[ 0.520398] Key type id_legacy registered
[ 0.524573] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.531415] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.538095] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.545610] msgmni has been set to 236
[ 0.549607] Key type big_key registered
[ 0.556456] alg: No test for stdrng (krng)
[ 0.560743] Key type asymmetric registered
[ 0.564949] Asymmetric key parser 'x509' registered
[ 0.570014] bounce: pool size: 64 pages
[ 0.574120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.581707] io scheduler noop registered
[ 0.585746] io scheduler deadline registered
[ 0.590169] io scheduler cfq registered (default)
[ 0.596394] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
[ 0.604533] irq: Cannot allocate irq_descs @ IRQ33, assuming pre-allocated
[ 0.611990] irq: Cannot allocate irq_descs @ IRQ65, assuming pre-allocated
[ 0.619503] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.660755] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
[ 0.700752] mv_xor f1060800.xor: Marvell XOR: ( xor cpy )
[ 0.706445] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.750751] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
[ 0.790750] mv_xor f1060900.xor: Marvell XOR: ( xor cpy )
[ 0.796681] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.804529] console [ttyS0] disabled
[ 0.808262] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A
[ 0.817447] console [ttyS0] enabled
[ 0.817447] console [ttyS0] enabled
[ 0.824579] bootconsole [earlycon0] disabled
[ 0.824579] bootconsole [earlycon0] disabled
[ 0.834803] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 0.841224] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 0.845866] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.851578] Scanning device for bad blocks
[ 0.871285] Bad eraseblock 146 at 0x000001240000
[ 0.876932] Bad eraseblock 156 at 0x000001380000
[ 0.910214] Bad eraseblock 426 at 0x000003540000
[ 0.925125] Bad eraseblock 523 at 0x000004160000
[ 0.935032] Bad eraseblock 573 at 0x0000047a0000
[ 0.962479] Bad eraseblock 788 at 0x000006280000
[ 0.987796] Bad eraseblock 983 at 0x000007ae0000
[ 0.998363] libphy: Fixed MDIO Bus: probed
[ 1.002863] libphy: orion_mdio_bus: probed
[ 1.007717] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 2.091395] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:25:31:00:99:a3
[ 2.100356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.106957] ehci-pci: EHCI PCI platform driver
[ 2.111506] ehci-orion: EHCI orion driver
[ 2.115712] orion-ehci f1050000.ehci: EHCI Host Controller
[ 2.121283] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 2.129121] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000
[ 2.150722] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 2.156955] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.163800] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.171073] usb usb1: Product: EHCI Host Controller
[ 2.175972] usb usb1: Manufacturer: Linux 3.18.5-kirkwood-tld-1 ehci_hcd
[ 2.182724] usb usb1: SerialNumber: f1050000.ehci
[ 2.188187] hub 1-0:1.0: USB hub found
[ 2.192043] hub 1-0:1.0: 1 port detected
[ 2.196863] mousedev: PS/2 mouse device common for all mice
[ 2.510750] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 2.662504] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.669252] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.676456] usb 1-1: Product: USB2.0 Hub
[ 2.681350] hub 1-1:1.0: USB hub found
[ 2.685502] hub 1-1:1.0: 4 ports detected
[ 2.971004] usb 1-1.1: new high-speed USB device number 3 using orion-ehci
[ 3.083375] usb 1-1.1: New USB device found, idVendor=090c, idProduct=1000
[ 3.090297] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.097677] usb 1-1.1: Product: DISK 2.0
[ 3.101638] usb 1-1.1: Manufacturer: USB
[ 3.105577] usb 1-1.1: SerialNumber: 77O11ZT5RXL0VP9O
[ 3.210721] rtc-mv f1010300.rtc: internal RTC not ticking
[ 3.216355] i2c /dev entries driver
[ 3.222403] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.228220] drop_monitor: Initializing network drop monitor service
[ 3.234788] TCP: cubic registered
[ 3.238127] NET: Registered protocol family 17
[ 3.242749] Key type dns_resolver registered
[ 3.247871] Loading compiled-in X.509 certificates
[ 3.252742] registered taskstats version 1
[ 3.257863] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.265693] Waiting 10 sec before mounting root device...
[ 13.280888] VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6
[ 13.288232] Please append a correct "root=" boot option; here are the available partitions:
[ 13.296680] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 13.304989] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.5-kirkwood-tld-1 #1
[ 13.312095] [<c0014aa0>] (unwind_backtrace) from [<c00110d4>] (show_stack+0x10/0x14)
[ 13.319881] [<c00110d4>] (show_stack) from [<c054f408>] (panic+0x80/0x208)
[ 13.326795] [<c054f408>] (panic) from [<c076c200>] (mount_block_root+0x200/0x248)
[ 13.334316] [<c076c200>] (mount_block_root) from [<c076c32c>] (mount_root+0xe4/0x10c)
[ 13.342181] [<c076c32c>] (mount_root) from [<c076c478>] (prepare_namespace+0x124/0x184)
[ 13.350222] [<c076c478>] (prepare_namespace) from [<c076be2c>] (kernel_init_freeable+0x1f8/0x240)
[ 13.359132] [<c076be2c>] (kernel_init_freeable) from [<c054e500>] (kernel_init+0x8/0xe4)
[ 13.367260] [<c054e500>] (kernel_init) from [<c000e310>] (ret_from_fork+0x14/0x24)
[ 13.374864] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 80.290711] random: nonblocking pool is initialized