Welcome! Log In Create A New Profile

Advanced

brick my dockstar uboot?

Posted by Felix 
Forum List Message List New Topic
Felix
brick my dockstar uboot?
November 12, 2010 09:17AM
Hi,
after messing around with fw_setenv, uboot on my dockstar hangs in a loop. It looks over the netconsole like this:

Quote

U-Boot 2010.09 (Oct 23 2010 - 11:49:22)
Marvell-Dockstar/Pogoplug by Jeff Doozan
ERROR: There is a global environment variable with the same name.
Unknown command 'start' - try 'help'
Using egiga0 device
host 10.0.0.5 is alive

How can i get uboot to work again?
Thank you!
Reply Quote
Jeff
Re: brick my dockstar uboot?
November 12, 2010 12:31PM
You've redirected the output to a netconsole 10.0.0.5. If you want to access it via serial, just disconnect your dockstar from the network and reboot. It won't find the server at 10.0.0.5 and should continue sending messages to the console.

-- Jeff
Reply Quote
Felix
Re: brick my dockstar uboot?
November 12, 2010 03:16PM
Thank you!
Luckily I had an TTL-232R-3V3 cable here. Connected it to the dockstar and was able to repair everything!
Felix
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: