Welcome! Log In Create A New Profile

Advanced

Bad Data Crc

Posted by Robert Schilling 
Robert Schilling
Bad Data Crc
November 16, 2010 02:12AM
Hi guys,

I got a new dockstar. Unfortunatly the original pogoplug linux doesn't boot. Uboot tells me followin Error:
U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16)

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 00690D60

Soc: 88F6281 A0 (DDR2)
CPU running @ 1200Mhz L2 running @ 400Mhz
SysClock = 400Mhz , TClock = 200Mhz 

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000   size 128MB 
DRAM Total size 128MB  16bit width
Flash:  0 kB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
NAND:256 MB

CPU : Marvell Feroceon (Rev 1)
CLOUD ENGINES BOARD: REDSTONE:1.0

Streaming disabled 
Write allocate disabled


USB 0: host mode
PEX 0: interface detected no Link.
Net:   egiga0 [PRIME], egiga1
Hit any key to stop autoboot:  0 

NAND read: device 0 offset 0x100000, size 0x300000

Reading data from 0x3ff800 -- 100% complete.
 3145728 bytes read: OK
## Booting image at 00800000 ...
   Image Name:   Linux-2.6.22.18
   Created:      2009-08-31  23:31:05 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1976384 Bytes =  1.9 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... Bad Data CRC
CE>>

Verifying the checksum tells me a wrong CRC.

Do I have any chance to rescue the device?

Thanks in advance!

Best regards from Ausrtria
Robert
Re: Bad Data Crc
November 17, 2010 09:15AM
I used this to recover: http://plugapps.com/index.php5?title=Hardware:_Seagate_DockStar_Reflashing

My dockstar arrived with a Bad Data CRC as well. I followed this thread: http://forum.doozan.com/read.php?3,1852



Edited 1 time(s). Last edit at 11/17/2010 09:20AM by jasonp.
Robert
Re: Bad Data Crc
November 17, 2010 04:58PM
Thank you. Works fine :)
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: