Booting to stock Zyxel NSA3xx with 2015.10-tld1 U-Boot Kirkwood February 04, 2016 04:56PM |
Registered: 8 years ago Posts: 46 |
Starting kernel ... Uncompressing Linux................................................................................................................................................................................................................................................................................ done, booting the kernel.
bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000 bootdelay=2 baudrate=115200 loads_echo=0 eth1addr=00:19:CB:00:51:82 ipaddr=10.4.50.165 serverip=10.4.50.5 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 nandEcc=1bit kernel_addr=480000 MODEL_ID=A203 PRODUCT_NAME=NSA-310 FEATURE_BIT=00 CONTRY_TYPE=FF VENDOR_NAME=ZyXEL Communications Corp. run_diag=yes ethaddr=CC:5D:4E:CA:02:64
Re: Booting to stock Zyxel NSA3xx with 2015.10-tld1 U-Boot Kirkwood February 06, 2016 03:02AM |
Registered: 8 years ago Posts: 6 |
Re: Booting to stock Zyxel NSA3xx with 2015.10-tld1 U-Boot Kirkwood February 06, 2016 02:55PM |
Admin Registered: 13 years ago Posts: 18,550 |
yigido
Re: Booting to stock Zyxel NSA3xx with 2015.10-tld1 U-Boot Kirkwood May 18, 2016 07:37AM |
Re: Booting to stock Zyxel NSA3xx with 2015.10-tld1 U-Boot Kirkwood May 18, 2016 08:55AM |
Registered: 8 years ago Posts: 298 |