David Dyer
BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 07:15PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 07:24PM |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 07:28PM |
Admin Registered: 13 years ago Posts: 18,564 |
printenvPlease post the entire serial console log up until this point.
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 08:19PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 08:36PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 08:50PM |
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-pogoplug-pro.dtb ethact=dwmac.40400000 ethaddr=00:25:31:01:ca:aa if_netconsole=ping $serverip ipaddr=192.168.7.18 load_dtb=echo loading DTB $dtb_file ...; ext2load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; ext2load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; ext2load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if ext2load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.7.4 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60500000 uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2747/131068 bytes OX820>run bootcmd
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 09:08PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 09:11PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 09:25PM |
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 10 0 OX820> printenv bootcmd bootcmd=run start_netconsole; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset OX820> setenv bootcmd 'run boot preboot; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset' OX820> printenv bootcmd bootcmd=run preboot; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset OX820> saveenv Saving Environment to NAND... Erasing NAND... Erasing at 0x100000 -- 50% complete. Erasing at 0x120000 -- 100% complete. Writing to NAND... OK OX820> run bootcmd dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! dwmac.40400000: No link. ping failed; host 192.168.7.4 is not alive dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! dwmac.40400000: No link. ping failed; host 192.168.7.4 is not alive dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! dwmac.40400000: No link. ping failed; host 192.168.7.4 is not alive dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! dwmac.40400000: No link. ping failed; host 192.168.7.4 is not alive dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! dwmac.40400000: No link. ping failed; host 192.168.7.4 is not alive starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Reset IDE: SATA PHY not ready for device 0 ide_preinit failed
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 09:27PM |
David Dyer
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 09:38PM |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 10:39PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 10:41PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 17, 2017 10:53PM |
Admin Registered: 13 years ago Posts: 18,564 |
ncat -lup 6666 192.168.7.18 6666
ping 192.168.0.4 printenv boot
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 08:49AM |
Registered: 7 years ago Posts: 366 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 09:00AM |
Registered: 7 years ago Posts: 366 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 09:08AM |
Registered: 7 years ago Posts: 366 |
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 OX820> ping 192.168.7.17 Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.7.17 is alive OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-pogoplug-pro.dtb ethact=dwmac.40400000 ethaddr=00:25:31:01:ca:aa if_netconsole=ping $serverip ipaddr=192.168.7.18 load_dtb=echo loading DTB $dtb_file ...; ext2load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; ext2load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; ext2load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if ext2load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.7.17 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60500000 uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2748/131068 bytes OX820> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Reset IDE: SATA PHY not ready for device 0 ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 51 7335789 00000000-01 83 Boot 2 7335840 485112 00000000-02 82 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 210 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4170064 bytes read in 458 ms (8.7 MiB/s) loading uInitrd ... 2245099 bytes read in 404 ms (5.3 MiB/s) loading DTB /boot/dts/ox820-pogoplug-pro.dtb ... 7029 bytes read in 237 ms (28.3 KiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-3.18.5-oxnas-tld-1 Created: 2015-10-23 2:26:57 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4170000 Bytes = 4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 60e00000 ... Image Name: initramfs-3.18.5-oxnas-tld-1 Created: 2015-10-23 2:29:24 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2245035 Bytes = 2.1 MiB Load Address: 60000000 Entry Point: 60000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 62c00000 Booting using the fdt blob at 0x62c00000 Loading Kernel Image ... OK Loading Ramdisk to 67c07000, end 67e2b1ab ... OK Loading Device Tree to 67c02000, end 67c06b74 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.5-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #2 SMP PREEMPT Thu Feb 12 11:17:40 PST 2015 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 9 pages/cpu @c7ee1000 s6624 r8192 d22048 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119396K/131072K available (5789K kernel code, 294K rwdata, 1704K rodata, 184K init, 236K bss, 11676K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0759918 (7495 kB) [ 0.000000] .init : 0xc075a000 - 0xc0788000 ( 184 kB) [ 0.000000] .data : 0xc0788000 - 0xc07d1800 ( 294 kB) [ 0.000000] .bss : 0xc07d1800 - 0xc080cab8 ( 237 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000181] Console: colour dummy device 80x30 [ 0.000209] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050055] pid_max: default: 32768 minimum: 301 [ 0.050222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050242] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051107] Initializing cgroup subsys net_cls [ 0.051169] CPU: Testing write buffer coherency: ok [ 0.051571] Setting up static identity map for 0x60580b78 - 0x60580bb0 [ 0.110489] CPU1: Booted secondary processor [ 0.170160] Brought up 2 CPUs [ 0.170186] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.171097] devtmpfs: initialized [ 0.174144] prandom: seed boundary self test passed [ 0.178063] prandom: 100 self tests passed [ 0.178083] pinctrl core: initialized pinctrl subsystem [ 0.180902] NET: Registered protocol family 16 [ 0.181440] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.185751] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.186040] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.186590] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.307947] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5 [ 0.308029] oxnas-pcie 47c0: link up [ 0.308249] oxnas-pcie 47c0: PCI host bridge to bus 0000:00 [ 0.308275] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.308295] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.308311] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 0.308331] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.308771] PCI: bus0: Fast back to back transfers disabled [ 0.308851] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.309232] vgaarb: loaded [ 0.309734] SCSI subsystem initialized [ 0.310668] usbcore: registered new interface driver usbfs [ 0.310804] usbcore: registered new interface driver hub [ 0.310960] usbcore: registered new device driver usb [ 0.311101] pps_core: LinuxPPS API ver. 1 registered [ 0.311114] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.311162] PTP clock support registered [ 0.312609] cfg80211: Calling CRDA to update world regulatory domain [ 0.313090] Switched to clocksource rps_clocksource_timer [ 0.327242] NET: Registered protocol family 2 [ 0.328199] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.328243] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.328279] TCP: Hash tables configured (established 1024 bind 1024) [ 0.328360] TCP: reno registered [ 0.328389] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.328430] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.328727] NET: Registered protocol family 1 [ 0.329203] RPC: Registered named UNIX socket transport module. [ 0.329223] RPC: Registered udp transport module. [ 0.329233] RPC: Registered tcp transport module. [ 0.329244] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.329623] Unpacking initramfs... [ 0.560688] Freeing initrd memory: 2196K (c7c07000 - c7e2c000) [ 0.561802] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.561881] Initialise system trusted keyring [ 0.580213] NFS: Registering the id_resolver key type [ 0.580270] Key type id_resolver registered [ 0.580282] Key type id_legacy registered [ 0.580323] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.580341] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.581291] fuse init (API version 7.23) [ 0.582732] msgmni has been set to 237 [ 0.583272] Key type big_key registered [ 0.587077] alg: No test for stdrng (krng) [ 0.653068] Key type asymmetric registered [ 0.653099] Asymmetric key parser 'x509' registered [ 0.653240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.653271] io scheduler noop registered [ 0.653294] io scheduler deadline registered [ 0.653649] io scheduler cfq registered (default) [ 0.654164] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.655472] console [ttyS0] disabled [ 0.655603] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 1.224768] console [ttyS0] enabled [ 1.233909] loop: module loaded [ 1.238338] scsi host0: sata_oxnas [ 1.242401] ata1: SATA max UDMA/133 irq 50 [ 1.246737] ox820sata: reseting SATA core [ 1.247895] nand: Could not find valid ONFI parameter page; aborting [ 1.247938] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.247943] nand: Hynix NAND 128MiB 3,3V 8-bit [ 1.247951] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.247966] Scanning device for bad blocks [ 1.309376] Bad eraseblock 769 at 0x000006020000 [ 1.334243] 2 cmdlinepart partitions found on MTD device 41000000.nand [ 1.340769] Creating 2 MTD partitions on "41000000.nand": [ 1.346147] 0x000000000000-0x000000e00000 : "boot" [ 1.352391] 0x000000e00000-0x000008000000 : "data" [ 1.359144] stmmaceth 40400000.ethernet: no reset control found [ 1.365076] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.370096] Ring mode enabled [ 1.373145] DMA HW capability register supported [ 1.377648] Enhanced/Alternate descriptors [ 1.381990] Enabled extended descriptors [ 1.385973] RX Checksum Offload Engine supported (type 2) [ 1.391439] TX Checksum insertion supported [ 1.395681] Wake-Up On Lan supported [ 1.399319] Enable RX Mitigation via HW Watchdog Timer [ 1.425745] libphy: stmmac: probed [ 1.429143] eth0: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.435517] eth0: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.441405] PPP generic driver version 2.4.2 [ 1.446018] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 1.452387] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 1.463557] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 1.472486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.478999] ehci-pci: EHCI PCI platform driver [ 1.483816] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.489320] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.497118] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100 [ 1.520593] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.526865] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.533657] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540871] usb usb1: Product: EHCI Host Controller [ 1.545728] usb usb1: Manufacturer: Linux 3.18.5-oxnas-tld-1 ehci_hcd [ 1.552156] usb usb1: SerialNumber: 40200100.ehci [ 1.557685] hub 1-0:1.0: USB hub found [ 1.561530] hub 1-0:1.0: 2 ports detected [ 1.566144] usbcore: registered new interface driver cdc_acm [ 1.571809] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.579873] usbcore: registered new interface driver cdc_wdm [ 1.585692] usbcore: registered new interface driver usb-storage [ 1.591933] usbcore: registered new interface driver usbserial [ 1.597803] usbcore: registered new interface driver usbserial_generic [ 1.604392] usbserial: USB Serial support registered for generic [ 1.610728] mousedev: PS/2 mouse device common for all mice [ 1.616294] i2c /dev entries driver [ 1.620938] usbcore: registered new interface driver usbhid [ 1.626485] usbhid: USB HID core driver [ 1.630036] ata1: SATA link down (SStatus 0 SControl 310) [ 1.636006] TCP: cubic registered [ 1.640384] NET: Registered protocol family 10 [ 1.646566] sit: IPv6 over IPv4 tunneling driver [ 1.652190] NET: Registered protocol family 17 [ 1.656765] Key type dns_resolver registered [ 1.662154] Loading compiled-in X.509 certificates [ 1.670814] Freeing unused kernel memory: 184K (c075a000 - c0788000) Loading, please wait... [ 1.807354] udevd[67]: starting version 175 [ 1.880770] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 2.043279] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.049966] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.080688] usb 1-1: Product: USB2.0 Hub [ 2.101235] hub 1-1:1.0: USB hub found [ 2.140129] hub 1-1:1.0: 4 ports detected [ 2.440936] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci [ 2.551674] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5573 [ 2.558528] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.565829] usb 1-1.1: Product: Staples [ 2.569648] usb 1-1.1: Manufacturer: [ 2.575984] usb 1-1.1: SerialNumber: 4C532000011009101052 [ 2.583864] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 2.590650] scsi host1: usb-storage 1-1.1:1.0 [ 2.610388] usbcore: registered new interface driver uas [ 3.591528] scsi 1:0:0:0: Direct-Access Staples 1.22 PQ: 0 ANSI: 5 [ 3.605544] sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB) [ 3.614750] sd 1:0:0:0: [sda] Write Protect is off [ 3.620707] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.638607] sda: sda1 sda2 [ 3.646028] sd 1:0:0:0: [sda] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Checking root file system ... fsck from util-linux 2.20.1 rootfs: clean, 26687/229376 files, 218516/916973 blocks done. [ 12.684154] kjournald starting. Commit interval 5 seconds [ 12.684229] EXT3-fs (sda1): mounted filesystem with ordered data mode done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 14.325422] udevd[275]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [ ok ] Activating swap...done. [....] Checking root file system...[ 16.444500] random: nonblocking pool is initialized fsck from util-linux 2.20.1 rootfs: clean, 26687/229376 files, 218516/916973 blocks done. [ 16.687651] EXT3-fs (sda1): using internal journal [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp /lib/init/rw. [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.20.1 done. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:ca:aa Sending on LPF/eth0/00:25:31:01:ca:aa Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 27.510190] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 192.168.7.1 DHCPACK from 192.168.7.1 bound to 192.168.7.18 -- renewal in 40004 seconds. [ 34.603210] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 34.614799] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 34.880737] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/wlan0/48:5d:60:4b:88:c5 Sending on LPF/wlan0/48:5d:60:4b:88:c5 Sending on Socket/fallback DHCPREQUEST on wlan0 to 255.255.255.255 port 67 [ 37.774430] wlan0: authenticate with 84:1b:5e:2a:6a:d0 [ 37.851258] wlan0: send auth to 84:1b:5e:2a:6a:d0 (try 1/3) [ 37.960593] wlan0: send auth to 84:1b:5e:2a:6a:d0 (try 2/3) [ 37.967641] wlan0: authenticated [ 37.980643] wlan0: associate with 84:1b:5e:2a:6a:d0 (try 1/3) [ 37.989662] wlan0: RX AssocResp from 84:1b:5e:2a:6a:d0 (capab=0x1411 status=0 aid=8) [ 37.997580] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.004193] wlan0: associated [ 38.012285] cfg80211: Calling CRDA to update world regulatory domain [ 38.054376] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:1b:5e:2a:6a:d0 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPOFFER from 192.168.7.1 DHCPACK from 192.168.7.1 bound to 192.168.7.28 -- renewal in 39887 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting NTP server: ntpd. [ ok ] Starting rpcbind daemon...[....] Already running.. [ ok ] Starting system message bus: dbus. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1902 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1900 (klogd) . ok Debian GNU/Linux 8 PogoPro ttyS0 PogoPro login:
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 09:20AM |
Registered: 7 years ago Posts: 366 |
root@PogoPro:~# fw_printenv bootcmd bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset root@PogoPro:~# fw_setenv bootcmd 'run start_netconsole; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset' root@PogoPro:~# fw_printenv bootcmd bootcmd=run start_netconsole; run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset root@PogoPro:~# reboot
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.18.5-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #2 SMP PREEMPT Thu Feb 12 11:17:40 PST 2015 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 9 pages/cpu @c7ee1000 s6624 r8192 d22048 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119396K/131072K available (5789K kernel code, 294K rwdata, 1704K rodata, 184K init, 236K bss, 11676K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0759918 (7495 kB) [ 0.000000] .init : 0xc075a000 - 0xc0788000 ( 184 kB) [ 0.000000] .data : 0xc0788000 - 0xc07d1800 ( 294 kB) [ 0.000000] .bss : 0xc07d1800 - 0xc080cab8 ( 237 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000179] Console: colour dummy device 80x30 [ 0.000209] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050053] pid_max: default: 32768 minimum: 301 [ 0.050222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050242] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051105] Initializing cgroup subsys net_cls [ 0.051166] CPU: Testing write buffer coherency: ok [ 0.051568] Setting up static identity map for 0x60580b78 - 0x60580bb0 [ 0.110487] CPU1: Booted secondary processor [ 0.170158] Brought up 2 CPUs [ 0.170183] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.171092] devtmpfs: initialized [ 0.174146] prandom: seed boundary self test passed [ 0.178063] prandom: 100 self tests passed [ 0.178083] pinctrl core: initialized pinctrl subsystem [ 0.180910] NET: Registered protocol family 16 [ 0.181442] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.185745] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.186042] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.186624] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.308856] oxnas-pcie 47c0: PCIe version/deviceID 0x82510b5 [ 0.308938] oxnas-pcie 47c0: link up [ 0.309153] oxnas-pcie 47c0: PCI host bridge to bus 0000:00 [ 0.309178] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.309196] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.309214] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 0.309232] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.309657] PCI: bus0: Fast back to back transfers disabled [ 0.309734] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.310131] vgaarb: loaded [ 0.310638] SCSI subsystem initialized [ 0.311523] usbcore: registered new interface driver usbfs [ 0.311662] usbcore: registered new interface driver hub [ 0.311815] usbcore: registered new device driver usb [ 0.311948] pps_core: LinuxPPS API ver. 1 registered [ 0.311964] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.312012] PTP clock support registered [ 0.313443] cfg80211: Calling CRDA to update world regulatory domain [ 0.313927] Switched to clocksource rps_clocksource_timer [ 0.328046] NET: Registered protocol family 2 [ 0.328995] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.329036] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.329070] TCP: Hash tables configured (established 1024 bind 1024) [ 0.329152] TCP: reno registered [ 0.329177] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.329216] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.329507] NET: Registered protocol family 1 [ 0.329973] RPC: Registered named UNIX socket transport module. [ 0.330037] RPC: Registered udp transport module. [ 0.330048] RPC: Registered tcp transport module. [ 0.330060] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.330432] Unpacking initramfs... [ 0.561259] Freeing initrd memory: 2196K (c7c07000 - c7e2c000) [ 0.562408] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.562490] Initialise system trusted keyring [ 0.580999] NFS: Registering the id_resolver key type [ 0.581056] Key type id_resolver registered [ 0.581068] Key type id_legacy registered [ 0.581112] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.581135] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.582033] fuse init (API version 7.23) [ 0.583470] msgmni has been set to 237 [ 0.583976] Key type big_key registered [ 0.587768] alg: No test for stdrng (krng) [ 0.654364] Key type asymmetric registered [ 0.654394] Asymmetric key parser 'x509' registered [ 0.654535] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.654566] io scheduler noop registered [ 0.654589] io scheduler deadline registered [ 0.654947] io scheduler cfq registered (default) [ 0.655488] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.656785] console [ttyS0] disabled [ 0.656913] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 1.225943] console [ttyS0] enabled [ 1.235125] loop: module loaded [ 1.239557] scsi host0: sata_oxnas [ 1.243591] ata1: SATA max UDMA/133 irq 50 [ 1.247930] ox820sata: reseting SATA core [ 1.249108] nand: Could not find valid ONFI parameter page; aborting [ 1.249152] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.249154] nand: Hynix NAND 128MiB 3,3V 8-bit [ 1.249164] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 1.249180] Scanning device for bad blocks [ 1.310604] Bad eraseblock 769 at 0x000006020000 [ 1.335462] 2 cmdlinepart partitions found on MTD device 41000000.nand [ 1.341977] Creating 2 MTD partitions on "41000000.nand": [ 1.347353] 0x000000000000-0x000000e00000 : "boot" [ 1.353625] 0x000000e00000-0x000008000000 : "data" [ 1.360384] stmmaceth 40400000.ethernet: no reset control found [ 1.366330] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.371371] Ring mode enabled [ 1.374405] DMA HW capability register supported [ 1.378905] Enhanced/Alternate descriptors [ 1.383247] Enabled extended descriptors [ 1.387230] RX Checksum Offload Engine supported (type 2) [ 1.392696] TX Checksum insertion supported [ 1.396938] Wake-Up On Lan supported [ 1.400588] Enable RX Mitigation via HW Watchdog Timer [ 1.427015] libphy: stmmac: probed [ 1.430407] eth0: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.436797] eth0: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.442693] PPP generic driver version 2.4.2 [ 1.447303] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 1.453672] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 1.464842] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 1.473689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.480199] ehci-pci: EHCI PCI platform driver [ 1.485025] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.490521] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.498314] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100 [ 1.520593] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.526860] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.533649] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.540856] usb usb1: Product: EHCI Host Controller [ 1.545710] usb usb1: Manufacturer: Linux 3.18.5-oxnas-tld-1 ehci_hcd [ 1.552133] usb usb1: SerialNumber: 40200100.ehci [ 1.557665] hub 1-0:1.0: USB hub found [ 1.561510] hub 1-0:1.0: 2 ports detected [ 1.566118] usbcore: registered new interface driver cdc_acm [ 1.571786] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.579850] usbcore: registered new interface driver cdc_wdm [ 1.585666] usbcore: registered new interface driver usb-storage [ 1.591892] usbcore: registered new interface driver usbserial [ 1.597760] usbcore: registered new interface driver usbserial_generic [ 1.604344] usbserial: USB Serial support registered for generic [ 1.610705] mousedev: PS/2 mouse device common for all mice [ 1.616268] i2c /dev entries driver [ 1.620851] usbcore: registered new interface driver usbhid [ 1.626398] usbhid: USB HID core driver [ 1.630036] ata1: SATA link down (SStatus 0 SControl 310) [ 1.635919] TCP: cubic registered [ 1.640363] NET: Registered protocol family 10 [ 1.646597] sit: IPv6 over IPv4 tunneling driver [ 1.652293] NET: Registered protocol family 17 [ 1.656875] Key type dns_resolver registered [ 1.662277] Loading compiled-in X.509 certificates [ 1.670929] Freeing unused kernel memory: 184K (c075a000 - c0788000) Loading, please wait... [ 1.807936] udevd[67]: starting version 175 [ 1.880826] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 2.043087] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.049766] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.075343] usb 1-1: Product: USB2.0 Hub [ 2.094891] hub 1-1:1.0: USB hub found [ 2.151219] hub 1-1:1.0: 4 ports detected [ 2.451013] usb 1-1.1: new high-speed USB device number 3 using oxnas-ehci [ 2.561625] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5573 [ 2.568476] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.575777] usb 1-1.1: Product: Staples [ 2.579599] usb 1-1.1: Manufacturer: [ 2.585935] usb 1-1.1: SerialNumber: 4C532000011009101052 [ 2.593361] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 2.600230] scsi host1: usb-storage 1-1.1:1.0 [ 2.620759] usbcore: registered new interface driver uas [ 3.601971] scsi 1:0:0:0: Direct-Access Staples 1.22 PQ: 0 ANSI: 5 [ 3.612126] sd 1:0:0:0: [sda] 7821312 512-byte logical blocks: (4.00 GB/3.72 GiB) [ 3.621230] sd 1:0:0:0: [sda] Write Protect is off [ 3.626967] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.644554] sda: sda1 sda2 [ 3.651975] sd 1:0:0:0: [sda] Attached SCSI removable disk Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Checking root file system ... fsck from util-linux 2.20.1 rootfs: clean, 26687/229376 files, 218517/916973 blocks done. [ 12.661844] kjournald starting. Commit interval 5 seconds [ 12.661921] EXT3-fs (sda1): mounted filesystem with ordered data mode done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 14.315512] udevd[277]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [....] Activating swap...[ 16.253568] random: nonblocking pool is initialized done. [....] Checking root file system...fsck from util-linux 2.20.1 rootfs: clean, 26687/229376 files, 218517/916973 blocks done. [ 16.657589] EXT3-fs (sda1): using internal journal [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp /lib/init/rw. [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.20.1 done. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:ca:aa Sending on LPF/eth0/00:25:31:01:ca:aa Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 27.310748] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.7.1 bound to 192.168.7.18 -- renewal in 41994 seconds. [ 30.476459] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 30.488005] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 [ 32.691307] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/wlan0/48:5d:60:4b:88:c5 Sending on LPF/wlan0/48:5d:60:4b:88:c5 Sending on Socket/fallback DHCPREQUEST on wlan0 to 255.255.255.255 port 67 [ 35.583255] wlan0: authenticate with 84:1b:5e:2a:6a:d0 [ 35.660997] wlan0: send auth to 84:1b:5e:2a:6a:d0 (try 1/3) [ 35.670169] wlan0: authenticated [ 35.680655] wlan0: associate with 84:1b:5e:2a:6a:d0 (try 1/3) [ 35.689676] wlan0: RX AssocResp from 84:1b:5e:2a:6a:d0 (capab=0x1411 status=0 aid=8) [ 35.697797] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.704222] wlan0: associated [ 35.712401] cfg80211: Calling CRDA to update world regulatory domain [ 35.771217] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 84:1b:5e:2a:6a:d0 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPOFFER from 192.168.7.1 DHCPACK from 192.168.7.1 bound to 192.168.7.28 -- renewal in 36266 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting rpcbind daemon...[....] Already running.. [ ok ] Starting NTP server: ntpd. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1888 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1885 (klogd) . ok Debian GNU/Linux 8 PogoPro ttyS0 PogoPro login:
root@BackUpServer:~# netcat -lup 6666 192.168.7.18 6666 U-Boot 2015.10-tld-1 (Nov 21 2015 - 01:17:59 -0800) OXNAS OX820 gcc (Debian 4.9.2-10) 4.9.2 GNU ld (GNU Binutils for Debian) 2.25 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Reset IDE: SATA PHY not ready for device 0 ide_preinit failed Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 51 7335789 00000000-01 83 Boot 2 7335840 485112 00000000-02 82 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 210 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4170064 bytes read in 457 ms (8.7 MiB/s) loading uInitrd ... 2245099 bytes read in 404 ms (5.3 MiB/s) loading DTB /boot/dts/ox820-pogoplug-pro.dtb ... 7029 bytes read in 237 ms (28.3 KiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-3.18.5-oxnas-tld-1 Created: 2015-10-23 2:26:57 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4170000 Bytes = 4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 60e00000 ... Image Name: initramfs-3.18.5-oxnas-tld-1 Created: 2015-10-23 2:29:24 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2245035 Bytes = 2.1 MiB Load Address: 60000000 Entry Point: 60000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 62c00000 Booting using the fdt blob at 0x62c00000 Starting kernel ...
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 09:22AM |
Registered: 7 years ago Posts: 366 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 09:41AM |
Registered: 7 years ago Posts: 366 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 18, 2017 02:53PM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 21, 2017 05:18AM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 23, 2017 09:08PM |
Registered: 7 years ago Posts: 366 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 24, 2017 06:47AM |
Admin Registered: 13 years ago Posts: 18,564 |
Re: BUG report: Net console for 2015.10 U-Boot for Pogoplug V3 (OXNAS OX820) not working January 25, 2017 06:20PM |
Registered: 7 years ago Posts: 366 |