Pogoplug Series 4 green light keeps flashing March 15, 2017 08:29AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing March 15, 2017 05:10PM |
Admin Registered: 13 years ago Posts: 18,560 |
uboot.2016.05-tld-1.pogo_v4.bodhi.tar md5: 0a16cbc707312d03b07094e4884be48b sha256: bb3b36527fdd76f3ddc130954d5aa47f53dc2f1b387ed623ddd15e33b0ef4c25
Quote
Important Note: If possible, try to test this boot image with UART booting before flashing to NAND. See davygravy's UART booting using kwboot instruction here in this thread. The latest u-boot image released here should be used for UART booting, if your box is the type that supports it (these do not: Dockstar, Pogo E02, iConnect).
To download ARM kwboot binary for UART booting at Dropbox
kwboot-2016.05.tar
md5:
76977c5a61544a5707dfa17ae832a3ad
sha256:
25ee4fa8a94372d2d398cac4704e9ee3ca87585c29e72e18323209b7f163209d
kwboot (this is an older version)
md5:
0efd011bdb244436e432a8de33e639a1
Quote
Updated 20 Feb 2016:
This Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 is to keep in sync with kernel Linux-4.4.0-kirkwood-tld-1.
Basic minimal Debian Kirkwood rootfs for most Kirwood plugs:
- tarball size: 137M
- install size: 398M
- a basic jessie rootfs.
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, and sysvinit-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Re: Pogoplug Series 4 green light keeps flashing March 16, 2017 12:21AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 03:37AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 04:50AM |
Admin Registered: 13 years ago Posts: 18,560 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 07:41AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 11:05AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 05:17PM |
Admin Registered: 13 years ago Posts: 18,560 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 07:20PM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 11, 2018 08:02PM |
Admin Registered: 13 years ago Posts: 18,560 |
Re: Pogoplug Series 4 green light keeps flashing September 19, 2018 07:03AM |
Registered: 7 years ago Posts: 7 |
Re: Pogoplug Series 4 green light keeps flashing September 19, 2018 06:03PM |
Admin Registered: 13 years ago Posts: 18,560 |
Quote
4b. Boot with DTB file embedded in the kernel image (no U-Boot envs changes are needed if your system already booting on USB or HDD)
Again, please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box.
Generate the uImage and uInitrd (the kernel files vmlinuz-4.18.4-kirkwood-tld-1 and initramfs-4.18.4-kirkwood-tld-1 were generated by dpkg in Step 3):
cd /boot
mv uImage uImage.orig
cp -a zImage-4.18.4-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.18.4-kirkwood-tld-1 -d zImage.fdt uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-4.18.4-kirkwood-tld-1 -d initrd.img-4.18.4-kirkwood-tld-1 uInitrd
cd /boot cp -a uImage uImage.dtb_embbedded cp -a uImage.orig uImage