Any luck with the pogoplug pro?

Just curious if there has been any progress on getting the Pogo Pro booting from usb & into debian?

I hope for progress on this also. Even if the old uboot could be tweaked to boot a Debian kernel flashed to NAND, I'm guessing that might suffice.

We had a little offtopic discussion here:
http://forum.doozan.com/read.php?2,3202,page=2

I also have a PPP with serial cable waiting for Debian :-)

I got my SSD yesterday, will test if the PPP will recognize it.

I'm waiting for it too.

Any news on it? Any luck to user Debian on Pogoplug Pro?

I'm waiting with bated breath :-) too.

The simplest method (that works at this time) is to use the NAND environments' /usr/local/cloudengines/bin/blparam to setup to boot from tftp, and point it as the sata, or usb (it generally starts enumeration of usb from ethernet up, and around to the front, at boot.

Here is mine, booting to sata.

load_tftp=tftp 60500000 uImage
boot_tftp=run load_tftp boot
bootargs=root=/dev/sda1 ubi.mtd=2,512 rootfstype=ext3 console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes
bootcmd=run boot_tftp

To boot from usb: add ' rootdelay=10' to the bootargs.