Failed on Install Plugbox Linux with kernel in NAND memory May 13, 2011 01:35AM |
Registered: 12 years ago Posts: 5 |
U-Boot 2010.09 (Feb 16 2011 - 18:43:36) UBIT v0.6 by Jeff Doozan and Peter Carmichael SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Creating 1 MTD partitions on "nand0": 0x000002500000-0x000008000000 : "mtd=3" UBI: attaching mtd1 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd1 to ubi0 UBI: MTD device name: "mtd=3" UBI: MTD device size: 91 MiB UBI: number of good PEBs: 721 UBI: number of bad PEBs: 7 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 710 UBI: total number of reserved PEBs: 11 UBI: number of PEBs reserved for bad PEB handling: 7 UBI: max/mean erase counter: 1/1 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:silent", error -19 Error reading superblock on volume 'ubi:silent'! UBIFS not mounted, use ubifs mount to mount volume first! Using egiga0 device ping failed; host 10.10.10.5 is not alive (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Hit any key to stop autoboot: 0 UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:fast", error -19 Error reading superblock on volume 'ubi:fast'! UBIFS not mounted, use ubifs mount to mount volume first! Loading file "/boot/uImage" from usb device 0:1 (usbda1) ** File not found /boot/uImage Loading file "/uInitrd" from usb device 0:1 (usbda1) ** File not found /uInitrd reading /boot/uImage ** Unable to read "/boot/uImage" from usb 0:1 ** reading /uInitrd ** Unable to read "/uInitrd" from usb 0:1 ** ** Block device usb 1 not supported ** Block device usb 1 not supported ** Invalid boot device ** ** Invalid boot device ** ** Block device usb 2 not supported ** Block device usb 2 not supported ** Invalid boot device ** ** Invalid boot device ** ** Block device usb 3 not supported ** Block device usb 3 not supported ** Invalid boot device ** ** Invalid boot device ** Unknown command 'ide' - try 'help' ** Block device ide 0 not supported ** Block device ide 0 not supported ** Invalid boot device ** ** Invalid boot device ** ** Block device ide 1 not supported ** Block device ide 1 not supported ** Invalid boot device ** ** Invalid boot device ** UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:ramdisk", error -19 Error reading superblock on volume 'ubi:ramdisk'! UBIFS not mounted, use ubifs mount to mount volume first! NAND read: device 0 offset 0x480000, size 0x80000 524288 bytes read: OK ## Starting application at 0x00800200 ...