Forum List Message List New Topic
dolphs
uboot does not fly on pogoplug pink
June 18, 2011 12:26AM
Hi,

I am trying to install uBoot on my freshly bought pink pogoplug.
However I get following error on validating existing uBoot:

# Validating existing uBoot...
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00080000...
Connecting to jeff.doozan.com (69.163.187.226:80)
## Unknown uBoot detected on mtd0: 188602682dada4308e3d9945c3f6b6ed
##
## The installer could not detect the version of your current uBoot
## This may happen if you have installed a different uBoot on
## /dev/mtd0 or if you have bad blocks on /dev/mtd0
##
## If you have bad blocks on mtd0, you should not try to install uBoot.
##
## If you have installed a diffirent uBoot on mtd0, and understand the
## risks, you can re-run the installer with the --no-uboot-check parameter
##
## Installation cancelled.


Please advise. Cheers
Reply Quote
pazos
Re: uboot does not fly on pogoplug pink
June 18, 2011 08:52AM
http://plugapps.com/forum/viewtopic.php?f=18&t=1183

You MUST NOT install jeff's uboot on a pogoplug other than v1/v2. You still be able to install a fully linux distro running from usb if you follow the steps here > http://plugapps.com/index.php5/Install_on_Pogoplug_Pro
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: