Pogoplug V3 (OXNAS OX820) Questions
Posted by echowarrior108
|
Pogoplug V3 (OXNAS OX820) Questions March 21, 2018 11:34PM |
Registered: 6 years ago Posts: 178 |
Bodhi, do you have a list of setenvs? I intend to set this up as a multi-usb cloud for home use and be able to access remotely. I'm running it through a Linksys wrt32x router so speed is no issue and I do have communication ( the router sees it), however I cannot access it from the browser yet, I know there has to be an easy fix but as usual I am still learning, I hope all this helps the next guy:)
thanks Echowarrior108
Edited 1 time(s). Last edit at 03/22/2018 12:07AM by bodhi.
thanks Echowarrior108
Edited 1 time(s). Last edit at 03/22/2018 12:07AM by bodhi.
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 22, 2018 12:10AM |
Admin Registered: 13 years ago Posts: 18,550 |
Echowarrior108,
To set up a home cloud. You need to research about NextCloud, for some similar package.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
To set up a home cloud. You need to research about NextCloud, for some similar package.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 22, 2018 12:12AM |
Registered: 6 years ago Posts: 178 |
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 22, 2018 08:38PM |
Registered: 6 years ago Posts: 178 |
Bodhi,
I checked out nextcloud, it seems ok but I have a bunch of windows based pc's that are not yet compatible, gonna keep searching until I find a good NAS program and software. I may need a bit of help installing but thanks to you and the others here I am getting the hang of it:)
Echowarrior108
I checked out nextcloud, it seems ok but I have a bunch of windows based pc's that are not yet compatible, gonna keep searching until I find a good NAS program and software. I may need a bit of help installing but thanks to you and the others here I am getting the hang of it:)
Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 24, 2018 11:55PM |
Registered: 6 years ago Posts: 178 |
Bodhi, definitely not using nextcloud, I can't even begin to figure out where things went wrong but here is a log of what is going on:
( all scenarios are logging in sudo su, viewing with terminal on Ubuntu 17.10, starting with #picocom -b 115200 /dev/ttyUSB0 )
If i try boot with pogoplug i get:
It then hangs and repeats.....
next I try with USB inserted:
so same thing then with SATA, no usb:
I had to interrupt to stop each of those.
at this point I did the printenv;
also when it starts looping it shows up on my router but i cannot access it via ssh.
I am assuming I have screwed up NAND as I made a duplicate usb with same results.
How do i fix it?
thanks Echowarrior108
( all scenarios are logging in sudo su, viewing with terminal on Ubuntu 17.10, starting with #picocom -b 115200 /dev/ttyUSB0 )
If i try boot with pogoplug i get:
# picocom -b 115200 /dev/ttyUSB0 picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive
It then hangs and repeats.....
next I try with USB inserted:
# picocom -b 115200 /dev/ttyUSB0 picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive
so same thing then with SATA, no usb:
# picocom -b 115200 /dev/ttyUSB0
picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: WDC WD7500BPKT-75PK4T0 Firm: 01.01A01 Ser#: WD-WXD1A61R3456
Type: Hard Disk
Supports 48-bit addressing
Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512)
NAND: 128 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
** Bad device usb 0 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
resetting ...
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: WDC WD7500BPKT-75PK4T0 Firm: 01.01A01 Ser#: WD-WXD1A61R3456
Type: Hard Disk
Supports 48-bit addressing
Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512)
NAND: 128 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
** Bad device usb 0 **
** Bad device usb 0 **
** Bad device usb 0 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
resetting ...
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12)
Boot device: SATA
Attempting to set PLLA to 800 MHz ...
plla_ctrl0 : 0000030a
plla_ctrl1 : 00400000
plla_ctrl2 : 007f0068
plla_ctrl3 : 00000193
PLLA Set
Bus 0: OK
Device 0:
reading bootargs.bin
reading u-boot.img
reading u-boot.img
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: WDC WD7500BPKT-75PK4T0 Firm: 01.01A01 Ser#: WD-WXD1A61R3456
Type: Hard Disk
Supports 48-bit addressing
Capacity: 715404.8 MB = 698.6 GB (1465149168 x 512)
NAND: 128 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
OX820 #
OX820 #
OX820 #
OX820 #
I had to interrupt to stop each of those.
at this point I did the printenv;
OX820 # printenv
SET_dtb=fdt addr ${fdtaddr} ; fdt header
autoload=no
baudrate=115200
bootcmd=run dt_bootcmd_usb
bootcmd_l=set_bootargs_lede
bootdelay=3
bootnew=bootm 60000000 - 61000000
bootold=bootm 60000000
console=console=ttyS0,115200n8
dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset
dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr
dt_load_dtb=ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb
dt_load_initrd=ext2load usb 0:1 $uinitrd_addr /boot/uInitrd
dt_load_uimage=ext2load usb 0:1 $uimage_addr /boot/uImage
dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm
dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot
dtb_addr=0x62c00000
ethact=mii0
ethaddr=00:25:31:01:0C:D5
ext2_dtb=ext2load ide 0:2 61000000 /boot/dts/ox820-pogoplug-classic.dtb
ext2_ideboot=run ext2_uimage ; run ext2_dtb ; run SET_dtb ; run bootnew
ext2_uimage=ext2load ide 0:2 60000000 /boot/uImage
ext4_dtb=ext4load ide 0:2 61000000 /boot/dts/ox820-pogoplug-classic.dtb
ext4_ideboot=run ext4_uimage ; run ext4_dtb ; run SET_dtb ; run bootnew
ext4_uimage=ext4load ide 0:2 60000000 /boot/uImage
fdtaddr=61000000
filesize=1b79
ideboot=run ext4_ideboot
idebootold=${loadold} ;${bootold}
imgaddr=60000000
ipaddr=192.168.5.73
keypressed=1
mtdids=nand0=41000000.nand
mtdparts=mtdparts=orion_nand:0x100000@0x0(u-boot),-@0x100000(ubi)
nand_erasesize=20000
nand_oobsize=40
nand_writesize=800
netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net console
preboot=run safeboot
serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;echo switch to serial console
serverip=192.168.5.72
set_bootargs_lede=setenv bootargs console=ttyS0,115200 $mtdparts
stderr=serial
stdin=serial
stdout=serial
uimage_addr=0x60500000
uinitrd_addr=0x60e00000
updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
Environment size: 2089/16380 bytes
OX820 #
also when it starts looping it shows up on my router but i cannot access it via ssh.
I am assuming I have screwed up NAND as I made a duplicate usb with same results.
How do i fix it?
thanks Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 25, 2018 04:17PM |
Admin Registered: 13 years ago Posts: 18,550 |
If i try boot with pogoplug i get: # picocom -b 115200 /dev/ttyUSB0 picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive
The booting above has some setup problem so you could not see the reason. The reason was most likely the default envs image was not flashed, or the envs were not adjusted correctly after the default envs images was flashed.
Note that the netconsole has started, so output stopped going out to serial console.
Quote
Using dwmac.40400000 device
host 192.168.5.72 is alive
1. Boot with this USB rootfs as before.But change the IP address of the box that you are using for serial console from 192.168.5.72 to some other number. Or just disconnect the Wifi / Ethernet on this laptop(?) so that it is cannot be connected to the Pogo. And then use only serial console to trouble shoot.
2. Interrupt serial console and
printenv bootPlease post the entire serial log here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 25, 2018 05:14PM |
Registered: 6 years ago Posts: 178 |
Bodhi, Ok I disconnected the ethernet cable and here is what comes up:
Thanks Echowarrior108
# picocom -b 115200 /dev/ttyUSB0
picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
Reset IDE: SATA PHY not ready for device 0
ide_preinit failed
Partition Map for USB device 0 -- Partition Type: DOS
Part Start Sector Num Sectors UUID Type
1 2048 15630336 4f02bf5a-01 83 Boot
loading envs from usb 0 ...
** File not found /boot/uEnv.txt **
no IDE devices available
running scan_disk ...
Scan device usb
device usb 0:1
1 bytes read in 264 ms (0 Bytes/s)
Found bootable drive on usb 0
loading uImage ...
4621824 bytes read in 565 ms (7.8 MiB/s)
loading uInitrd ...
0 bytes read in 193 ms (0 Bytes/s)
loading DTB /boot/dts/ox820-pogoplug-pro.dtb ...
7067 bytes read in 258 ms (26.4 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
Image Name: Linux-4.4.54-oxnas-tld-1
Created: 2017-08-01 4:45:36 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4621760 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
Wrong Ramdisk Image Format
Ramdisk image is corrupt or invalid
resetting ...
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
Hit any key to stop autoboot: 0
OX820> printenv
bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dtb_file=/boot/dts/ox820-pogoplug-pro.dtb
ethact=dwmac.40400000
ethaddr=00:25:31:01:0C:D5
if_netconsole=ping $serverip
ipaddr=192.168.5.97
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file
load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd
load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage
mainlineLinux=yes
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
nc_ready=0
preboot=run preboot_nc
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.5.72
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize
uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi
usb_custom_params=zswap.enabled=1
usb_ready_retry=15
Environment size: 2756/131068 bytes
OX820>
Thanks Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 25, 2018 06:14PM |
Admin Registered: 13 years ago Posts: 18,550 |
The envs are OK. But the uInitrd kernel file was bad.
Mount this USB rootfs on your other Linux box and look at that file. Retrace your steps (should keep the log of what you did), to see why that file was touched and in what way!
Assuming your USB drive is mounted as /media/sdb1 on the Linux box.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/25/2018 06:16PM by bodhi.
loading uInitrd ... 0 bytes read in 193 ms (0 Bytes/s) loading DTB /boot/dts/ox820-pogoplug-pro.dtb ... 7067 bytes read in 258 ms (26.4 KiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-4.4.54-oxnas-tld-1 Created: 2017-08-01 4:45:36 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4621760 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK Wrong Ramdisk Image Format Ramdisk image is corrupt or invalid resetting ...
Mount this USB rootfs on your other Linux box and look at that file. Retrace your steps (should keep the log of what you did), to see why that file was touched and in what way!
Assuming your USB drive is mounted as /media/sdb1 on the Linux box.
cd /media/sdb1/boot ls -latrd *And post the output here if you can't see why it was bad.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/25/2018 06:16PM by bodhi.
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 25, 2018 06:25PM |
Registered: 6 years ago Posts: 178 |
root@Alienwar-M17xR4:/media/russ/rootfs# ls -latrd * drwxr-xr-x 11 root root 4096 Dec 31 1969 var drwxr-xr-x 61 root root 4096 Dec 31 1969 etc drwxr-xr-x 2 root root 4096 Jan 1 2011 sys drwxr-xr-x 2 root root 4096 Jan 22 2012 proc drwxr-xr-x 2 root root 4096 Jan 22 2012 home drwx------ 2 root root 16384 Feb 24 2012 lost+found drwxr-xr-x 10 root root 4096 Feb 24 2012 usr drwxr-xr-x 2 root root 4096 Feb 24 2012 srv drwxr-xr-x 2 root root 4096 Feb 24 2012 opt drwxr-xr-x 2 root root 4096 Feb 24 2012 media drwxr-xr-x 5 root root 4096 Feb 24 2012 dev drwxr-xr-x 2 root root 4096 Feb 7 2013 run drwxr-xr-x 2 root root 4096 Aug 1 2017 mnt drwxr-xr-x 13 root root 4096 Aug 1 2017 lib drwxr-xr-x 2 root root 4096 Aug 1 2017 sbin drwxr-xr-x 2 root root 4096 Aug 1 2017 bin drwx------ 5 root root 4096 Aug 1 2017 root drwxrwxrwt 2 root root 4096 Mar 25 19:03 tmp drwxr-xr-x 3 root root 4096 Mar 25 19:06 boot root@Alienwar-M17xR4:/media/russ/rootfs#
oops, you said the boot folder:)
/rootfs/boot$ ls -latrd * -rw-r--r-- 1 root root 111194 Mar 19 2017 config-4.4.54-oxnas-tld-1 -rwxr-xr-x 1 root root 4621760 Mar 19 2017 zImage-4.4.54-oxnas-tld-1 -rw------- 1 root root 4621760 Mar 19 2017 vmlinuz-4.4.54-oxnas-tld-1 -rw------- 1 root root 1712926 Mar 19 2017 System.map-4.4.54-oxnas-tld-1 -rw-r--r-- 1 root root 7378702 Mar 19 2017 linux-headers-4.4.54-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 4621824 Aug 1 2017 uImage -rw-r--r-- 1 root root 4594312 Aug 1 2017 initrd.img-4.4.54-oxnas-tld-1 -rw-r--r-- 1 root root 4594376 Aug 1 2017 uInitrd drwxr-xr-x 2 root root 4096 Oct 5 03:22 dts -rw-r--r-- 1 root root 114431 Mar 22 20:21 config-4.4.123-oxnas-tld-1 -rwxr-xr-x 1 root root 4119232 Mar 22 21:07 zImage-4.4.123-oxnas-tld-1 -rw-r--r-- 1 root root 11371762 Mar 22 22:47 linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 7524336 Mar 22 23:03 linux-headers-4.4.123-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 51200 Mar 22 23:09 linux-dtb-4.4.123-oxnas-tld-1.tar -rw-r--r-- 1 root root 242511 Mar 23 04:26 linux-4.4.123-oxnas-tld-1.patch
Edited 1 time(s). Last edit at 03/25/2018 06:30PM by echowarrior108.
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 25, 2018 07:20PM |
Registered: 6 years ago Posts: 178 |
hey Bodhi, not this is weird, I unplugged and rebooted this plug the same way since last night, I tried it agian and the results are below
so I am back in and just gonna leave it on my terminal as I have to run out for a while.
I am wondering if I have too many files in boot if its getting confused...
thanks Echowarrior108
# picocom -b 115200 /dev/ttyUSB0 picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready �� U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug V3 Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 116204K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14868K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0827e14 (8320 kB) [ 0.000000] .init : 0xc0828000 - 0xc0860000 ( 224 kB) [ 0.000000] .data : 0xc0860000 - 0xc08a8378 ( 289 kB) [ 0.000000] .bss : 0xc08a8378 - 0xc08e6350 ( 248 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000166] Console: colour dummy device 80x30 [ 0.000197] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050017] pid_max: default: 32768 minimum: 301 [ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050201] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051018] Initializing cgroup subsys net_cls [ 0.051100] CPU: Testing write buffer coherency: ok [ 0.051520] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.190131] Brought up 2 CPUs [ 0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.190937] devtmpfs: initialized [ 0.196413] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.196459] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.196764] prandom: seed boundary self test passed [ 0.201182] prandom: 100 self tests passed [ 0.201210] pinctrl core: initialized pinctrl subsystem [ 0.202027] NET: Registered protocol family 16 [ 0.202590] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230018] cpuidle: using governor ladder [ 0.260011] cpuidle: using governor menu [ 0.265077] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.265472] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.266040] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.389076] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5 [ 0.389194] oxnas-pcie 47c00000.pcie-controller: link up [ 0.389524] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00 [ 0.389547] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.389565] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.389580] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 0.389598] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.390205] PCI: bus0: Fast back to back transfers disabled [ 0.390297] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.390768] vgaarb: loaded [ 0.391260] SCSI subsystem initialized [ 0.392135] usbcore: registered new interface driver usbfs [ 0.392245] usbcore: registered new interface driver hub [ 0.392399] usbcore: registered new device driver usb [ 0.392606] pps_core: LinuxPPS API ver. 1 registered [ 0.392622] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.392668] PTP clock support registered [ 0.394831] clocksource: Switched to clocksource rps_clocksource_timer [ 0.413450] NET: Registered protocol family 2 [ 0.414338] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.414379] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.414415] TCP: Hash tables configured (established 1024 bind 1024) [ 0.414512] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.414556] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.414822] NET: Registered protocol family 1 [ 0.415352] RPC: Registered named UNIX socket transport module. [ 0.415372] RPC: Registered udp transport module. [ 0.415383] RPC: Registered tcp transport module. [ 0.415393] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.415795] Unpacking initramfs... [ 0.889684] Freeing initrd memory: 4488K (c79c5000 - c7e27000) [ 0.891361] Initialise system trusted keyring [ 0.905469] zbud: loaded [ 0.911198] NFS: Registering the id_resolver key type [ 0.911262] Key type id_resolver registered [ 0.911278] Key type id_legacy registered [ 0.911324] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.911349] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.912299] fuse init (API version 7.23) [ 0.914329] Key type big_key registered [ 1.000540] Key type asymmetric registered [ 1.000578] Asymmetric key parser 'x509' registered [ 1.000714] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.000739] io scheduler noop registered [ 1.000762] io scheduler deadline registered [ 1.000826] io scheduler cfq registered (default) [ 1.001507] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.003043] console [ttyS0] disabled [ 1.003143] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A [ 1.586227] console [ttyS0] enabled [ 1.601100] loop: module loaded [ 1.606220] scsi host0: sata_oxnas [ 1.610145] ata1: SATA max UDMA/133 irq 7 [ 1.614238] sata_oxnas: resetting SATA core [ 1.615336] nand: Could not find valid ONFI parameter page; aborting [ 1.615380] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.615388] nand: Hynix NAND 128MiB 3,3V 8-bit [ 1.615395] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.615413] Scanning device for bad blocks [ 1.635368] Bad eraseblock 249 at 0x000001f20000 [ 1.697308] 2 cmdlinepart partitions found on MTD device 41000000.nand [ 1.703836] Creating 2 MTD partitions on "41000000.nand": [ 1.709214] 0x000000000000-0x000000e00000 : "boot" [ 1.715983] 0x000000e00000-0x000008000000 : "data" [ 1.723343] oxnas-gmac 40400000.ethernet: no reset control found [ 1.729331] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 1.734402] Ring mode enabled [ 1.737441] DMA HW capability register supported [ 1.741969] Enhanced/Alternate descriptors [ 1.746301] Enabled extended descriptors [ 1.750310] RX Checksum Offload Engine supported (type 2) [ 1.755765] TX Checksum insertion supported [ 1.760028] Wake-Up On Lan supported [ 1.763668] Enable RX Mitigation via HW Watchdog Timer [ 1.795125] libphy: stmmac: probed [ 1.798520] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 1.804986] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 1.811709] PPP generic driver version 2.4.2 [ 1.816391] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 1.822801] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 1.834001] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 1.843230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.849745] ehci-pci: EHCI PCI platform driver [ 1.854635] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.860193] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.868001] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100 [ 1.890004] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.896330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.903134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.910348] usb usb1: Product: EHCI Host Controller [ 1.915205] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd [ 1.921640] usb usb1: SerialNumber: 40200100.ehci [ 1.927311] hub 1-0:1.0: USB hub found [ 1.931166] hub 1-0:1.0: 2 ports detected [ 1.936296] usbcore: registered new interface driver cdc_acm [ 1.941995] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.950097] usbcore: registered new interface driver cdc_wdm [ 1.955893] usbcore: registered new interface driver usb-storage [ 1.962109] usbcore: registered new interface driver usbserial [ 1.967994] usbcore: registered new interface driver usbserial_generic [ 1.974597] usbserial: USB Serial support registered for generic [ 1.981076] mousedev: PS/2 mouse device common for all mice [ 1.986798] i2c /dev entries driver [ 1.991680] hidraw: raw HID events driver (C) Jiri Kosina [ 1.997306] usbcore: registered new interface driver usbhid [ 2.002913] usbhid: USB HID core driver [ 2.008949] NET: Registered protocol family 10 [ 2.014940] sit: IPv6 over IPv4 tunneling driver [ 2.020152] ata1: SATA link down (SStatus 0 SControl 310) [ 2.020684] NET: Registered protocol family 17 [ 2.020851] Key type dns_resolver registered [ 2.031114] registered taskstats version 1 [ 2.031157] Loading compiled-in X.509 certificates [ 2.031280] zswap: loaded using pool lzo/zbud [ 2.061496] Key type encrypted registered [ 2.068669] Freeing unused kernel memory: 224K (c0828000 - c0860000) Loading, please wait... starting version 232 [ 2.250091] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.250165] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 2.251261] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.287912] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.299496] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.309073] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.319434] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.329794] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.343170] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.353405] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.364075] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.451934] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.458613] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.480125] usb 1-1: Product: USB2.0 Hub [ 2.490626] hub 1-1:1.0: USB hub found [ 2.494804] hub 1-1:1.0: 4 ports detected [ 2.726615] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0 [ 2.790169] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci [ 2.901954] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530 [ 2.909762] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.917317] usb 1-1.3: Product: Cruzer [ 2.923630] usb 1-1.3: Manufacturer: SanDisk [ 2.927897] usb 1-1.3: SerialNumber: 20053248121181F0AC47 [ 2.934973] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 2.963589] scsi host1: usb-storage 1-1.3:1.0 [ 3.056496] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 3.971258] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.20 PQ: 0 ANSI: 5 [ 3.987013] sd 1:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3.996876] sd 1:0:0:0: [sda] Write Protect is off [ 4.005847] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.032448] sda: sda1 [ 4.043420] sd 1:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 19658/488640 files, 207202/1953792 blocks done. [ 13.426547] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [ ok ] Activating swap...done. [ 17.484285] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Activating lvm and md swap...done. [....] Checking file systems...[ 18.642600] random: nonblocking pool is initialized fsck from util-linux 2.29.2 done. [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:0c:d5 Sending on LPF/eth0/00:25:31:01:0c:d5 Sending on Socket/fallback DHCPREQUEST of 192.168.0.16 on eth0 to 255.255.255.255 port 67 [ 26.160296] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx DHCPREQUEST of 192.168.0.16 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 No DHCPOFFERS received. Trying recorded lease 192.168.0.16 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1233 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting system message bus: dbus. [ ok ] Starting NTP server: ntpd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1232 (klogd) . ok Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Tue Aug 1 17:15:07 PDT 2017 from 192.168.0.220 on pts/0 Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~#
so I am back in and just gonna leave it on my terminal as I have to run out for a while.
I am wondering if I have too many files in boot if its getting confused...
thanks Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 26, 2018 12:18AM |
Admin Registered: 13 years ago Posts: 18,550 |
It is OK. You are running kernel 4.4.54-oxnas-tld-1.
The files in red showed you've downloaded kernel 4.4.123-oxnas-tld-1 package, and have extracted the tarball, but have not installed this kernel yet.
The files in blue showed that you are running kernel 4.4.54-oxnas-tld-1. Everything looks fine.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
-rw-r--r-- 1 root root 111194 Mar 19 2017 config-4.4.54-oxnas-tld-1 -rwxr-xr-x 1 root root 4621760 Mar 19 2017 zImage-4.4.54-oxnas-tld-1 -rw------- 1 root root 4621760 Mar 19 2017 vmlinuz-4.4.54-oxnas-tld-1 -rw------- 1 root root 1712926 Mar 19 2017 System.map-4.4.54-oxnas-tld-1 -rw-r--r-- 1 root root 7378702 Mar 19 2017 linux-headers-4.4.54-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 4621824 Aug 1 2017 uImage -rw-r--r-- 1 root root 4594312 Aug 1 2017 initrd.img-4.4.54-oxnas-tld-1 -rw-r--r-- 1 root root 4594376 Aug 1 2017 uInitrd drwxr-xr-x 2 root root 4096 Oct 5 03:22 dts -rw-r--r-- 1 root root 114431 Mar 22 20:21 config-4.4.123-oxnas-tld-1 -rwxr-xr-x 1 root root 4119232 Mar 22 21:07 zImage-4.4.123-oxnas-tld-1 -rw-r--r-- 1 root root 11371762 Mar 22 22:47 linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 7524336 Mar 22 23:03 linux-headers-4.4.123-oxnas-tld-1_1.0_armel.deb -rw-r--r-- 1 root root 51200 Mar 22 23:09 linux-dtb-4.4.123-oxnas-tld-1.tar -rw-r--r-- 1 root root 242511 Mar 23 04:26 linux-4.4.123-oxnas-tld-1.patch
The files in red showed you've downloaded kernel 4.4.123-oxnas-tld-1 package, and have extracted the tarball, but have not installed this kernel yet.
The files in blue showed that you are running kernel 4.4.54-oxnas-tld-1. Everything looks fine.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 26, 2018 11:25AM |
Registered: 6 years ago Posts: 178 |
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 26, 2018 12:14PM |
Registered: 6 years ago Posts: 178 |
Bodhi, I think this may be why, dpkg to install the new kernel, I am gonna keep working on it but if you know an easy fix I would really appreciate it:)
Thanks, Echowarrior108
# dpkg -i linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb dpkg: error processing archive linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb (--install): package architecture (armel) does not match system (amd64) Errors were encountered while processing: linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb
Thanks, Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 26, 2018 01:28PM |
Admin Registered: 13 years ago Posts: 18,550 |
echowarrior108,
You are trying installing kernel offline on your Ubuntu while the USB is mounted on it (you can not do that). Note: you could do that with chroot, but it is more advance subject, don't try that yet.
Boot into to the Pogo, and then run dpkg at the Linux shell terminal to install new kernel.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/26/2018 06:12PM by bodhi.
You are trying installing kernel offline on your Ubuntu while the USB is mounted on it (you can not do that). Note: you could do that with chroot, but it is more advance subject, don't try that yet.
Boot into to the Pogo, and then run dpkg at the Linux shell terminal to install new kernel.
root@debian:~#
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 03/26/2018 06:12PM by bodhi.
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 27, 2018 05:58AM |
Registered: 6 years ago Posts: 178 |
Bodhi, I have not been able to get to root@debian:~# to do this however I found that my sandisk drive has been malfunctioning, it actually quit working so that may be part of the problem, I created a new usb drive in my other Sandisk drive and have ran into a new issue:
so I am getting closer to a fix but not quite there yet, have you ran across this before?
Echowarrior108
# picocom -b 115200 /dev/ttyUSB0
picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
4621824 bytes read in 382 ms (11.5 MiB/s)
4594376 bytes read in 353 ms (12.4 MiB/s)
ext4load - load binary file from a Ext4 filesystem
Usage:
ext4load <interface> [<dev[:part]> [addr [filename [bytes [pos]]]]]
- load binary file 'filename' from 'dev' on 'interface'
to address 'addr' from ext4 filesystem
## Booting kernel from Legacy Image at 60500000 ...
Image Name: Linux-4.4.54-oxnas-tld-1
Created: 2017-08-01 4:45:36 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4621760 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
Image Name: initramfs-4.4.54-oxnas-tld-1
Created: 2017-08-01 7:51:04 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4594312 Bytes = 4.4 MiB
Load Address: 60000000
Entry Point: 60000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Error: unrecognized/unsupported machine ID (r1 = 0x00000480).
Available machine support:
ID (hex) NAME
ffffffff PLXTECH NAS782X SoC (Flattened Device Tree)
Please check your kernel config and/or bootloader.
so I am getting closer to a fix but not quite there yet, have you ran across this before?
Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 27, 2018 04:24PM |
Admin Registered: 13 years ago Posts: 18,550 |
echowarrior108,
Your envs are messed up. The DTB was not loaded. If you study the boot log you had before with a successful run, and compare with this one. You will see that loading was missing.
Power up, interrupt serial console and list the envs:
Please post it here if you can't see which env was in error.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Your envs are messed up. The DTB was not loaded. If you study the boot log you had before with a successful run, and compare with this one. You will see that loading was missing.
Power up, interrupt serial console and list the envs:
printenv
Please post it here if you can't see which env was in error.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 28, 2018 04:31PM |
Registered: 6 years ago Posts: 178 |
Bodhi, sorry about wait, still fixing things after Hurricane Irma:) I went ahead and created the new boot usb , I was able to log back into debian:
this is where I am so far:) had an issue with Ubuntu locking my username and password out so I had to re-install that as well, glad I posted most of the logs down as I was able to track down enough to re-install:)
now I should be able to install the new kernel:) I will keep you posted.
Thanks Echowarrior108
root@alienwar-M17xR4:/home/alienwar# picocom -b 115200 /dev/ttyUSB0
picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
Hit any key to stop autoboot: 0
OX820> printenv
bootcmd=run dt_bootcmd_usb
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset
dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr
dt_load_dtb=ext4load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb
dt_load_initrd=ext4load usb 0:1 $uinitrd_addr /boot/uInitrd
dt_load_uimage=ext4load usb 0:1 0x60500000 /boot/uImage
dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm
dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot
dtb_file=/boot/dts/ox820-pogoplug-pro.dtb
ethact=dwmac.40400000
ethaddr=00:25:31:01:0C:D5
if_netconsole=ping $serverip
ipaddr=192.168.5.97
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file
load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd
load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage
mainlineLinux=yes
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
nc_ready=0
preboot=run preboot_nc
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.5.72
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize
uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi
uimage_addr=0x60500000
uinitrd_addr=0x60e00000
usb_custom_params=zswap.enabled=1
usb_ready_retry=15
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand:14m(boot),-(data) earlyprintk=serial
Environment size: 3349/131068 bytes
OX820> setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10'
OX820> setenv uinitrd_addr 0x60e00000
OX820> setenv uimage_addr 0x60500000
OX820> setenv dtb_addr 0x62c00000
OX820> setenv dt_load_dtb 'ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb'
OX820> OX820 # setenv dt_load_initrd 'ext2load usb 0:1 $uinitrd_addr /boot/uInitrd'
Unknown command 'OX820' - try 'help'
OX820> OX820 # setenv dt_load_initrd 'ext2load usb 0:1 $uinitrd_addr /boot/uInitsetenv dt_load_dtb 'ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb'
OX820> setenv dt_load_dtb 'ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb'
OX820> setenv dt_load_uimage 'ext2load usb 0:1 $uimage_addr /boot/uImage'
OX820> setenv dt_bootm 'bootm $uimage_addr $uinitrd_addr $dtb_addr'
OX820> setenv dt_usb_boot 'run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm'
OX820> setenv dt_usb_bootcmd 'run usb_set_bootargs; run dt_usb_boot'
OX820> setenv dt_bootcmd_usb 'usb start; run dt_usb_bootcmd; usb stop; reset'
OX820> setenv bootcmd 'run dt_bootcmd_usb'
OX820> saveenv
Saving Environment to NAND...
Erasing NAND...
Erasing at 0x120000 -- 100% complete.
Writing to NAND... OK
OX820>
OX820>
OX820>
OX820>
OX820>
OX820>
OX820>
OX820>
OX820>
OX820> boot
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
4621824 bytes read in 382 ms (11.5 MiB/s)
4594376 bytes read in 353 ms (12.4 MiB/s)
7067 bytes read in 195 ms (35.2 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
Image Name: Linux-4.4.54-oxnas-tld-1
Created: 2017-08-01 4:45:36 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4621760 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
Image Name: initramfs-4.4.54-oxnas-tld-1
Created: 2017-08-01 7:51:04 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4594312 Bytes = 4.4 MiB
Load Address: 60000000
Entry Point: 60000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 62c00000
Booting using the fdt blob at 0x62c00000
Loading Kernel Image ... OK
Loading Ramdisk to 679c4000, end 67e25a88 ... OK
Loading Device Tree to 679bf000, end 679c3b9a ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 116204K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14868K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0827e14 (8320 kB)
[ 0.000000] .init : 0xc0828000 - 0xc0860000 ( 224 kB)
[ 0.000000] .data : 0xc0860000 - 0xc08a8378 ( 289 kB)
[ 0.000000] .bss : 0xc08a8378 - 0xc08e6350 ( 248 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000163] Console: colour dummy device 80x30
[ 0.000197] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050017] pid_max: default: 32768 minimum: 301
[ 0.050191] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050209] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051013] Initializing cgroup subsys net_cls
[ 0.051095] CPU: Testing write buffer coherency: ok
[ 0.051517] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190131] Brought up 2 CPUs
[ 0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190929] devtmpfs: initialized
[ 0.196344] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.196387] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196705] prandom: seed boundary self test passed
[ 0.201121] prandom: 100 self tests passed
[ 0.201152] pinctrl core: initialized pinctrl subsystem
[ 0.201976] NET: Registered protocol family 16
[ 0.202516] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230013] cpuidle: using governor ladder
[ 0.260008] cpuidle: using governor menu
[ 0.265064] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265466] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.266053] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.389806] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.389926] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.390289] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.390318] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.390336] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.390351] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.390371] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.390927] PCI: bus0: Fast back to back transfers disabled
[ 0.391016] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[ 0.391477] vgaarb: loaded
[ 0.391971] SCSI subsystem initialized
[ 0.392849] usbcore: registered new interface driver usbfs
[ 0.392960] usbcore: registered new interface driver hub
[ 0.393113] usbcore: registered new device driver usb
[ 0.393320] pps_core: LinuxPPS API ver. 1 registered
[ 0.393336] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.393382] PTP clock support registered
[ 0.395512] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.414364] NET: Registered protocol family 2
[ 0.415265] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.415308] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.415342] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.415441] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.415485] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.415754] NET: Registered protocol family 1
[ 0.416291] RPC: Registered named UNIX socket transport module.
[ 0.416312] RPC: Registered udp transport module.
[ 0.416325] RPC: Registered tcp transport module.
[ 0.416335] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.416734] Unpacking initramfs...
[ 0.892336] Freeing initrd memory: 4488K (c79c4000 - c7e26000)
[ 0.893841] Initialise system trusted keyring
[ 0.907409] zbud: loaded
[ 0.912849] NFS: Registering the id_resolver key type
[ 0.912911] Key type id_resolver registered
[ 0.912924] Key type id_legacy registered
[ 0.912967] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.912990] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.913932] fuse init (API version 7.23)
[ 0.915934] Key type big_key registered
[ 0.993958] Key type asymmetric registered
[ 0.993994] Asymmetric key parser 'x509' registered
[ 0.994124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.994150] io scheduler noop registered
[ 0.994170] io scheduler deadline registered
[ 0.994234] io scheduler cfq registered (default)
[ 0.994933] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.996472] console [ttyS0] disabled
[ 0.996572] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.576273] console [ttyS0] enabled
[ 1.591234] loop: module loaded
[ 1.843223] scsi host0: sata_oxnas
[ 1.896473] ata1: SATA max UDMA/133 irq 7
[ 1.900584] sata_oxnas: resetting SATA core
[ 1.901680] nand: Could not find valid ONFI parameter page; aborting
[ 1.901724] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.901731] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.901742] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.901757] Scanning device for bad blocks
[ 1.921804] Bad eraseblock 249 at 0x000001f20000
[ 1.983895] 2 ofpart partitions found on MTD device 41000000.nand
[ 1.989990] Creating 2 MTD partitions on "41000000.nand":
[ 1.995371] 0x000000000000-0x000000e00000 : "boot"
[ 2.002127] 0x000000e00000-0x000008000000 : "data"
[ 2.009438] oxnas-gmac 40400000.ethernet: no reset control found
[ 2.015480] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 2.020523] Ring mode enabled
[ 2.023559] DMA HW capability register supported
[ 2.028060] Enhanced/Alternate descriptors
[ 2.032412] Enabled extended descriptors
[ 2.036403] RX Checksum Offload Engine supported (type 2)
[ 2.041876] TX Checksum insertion supported
[ 2.046120] Wake-Up On Lan supported
[ 2.049758] Enable RX Mitigation via HW Watchdog Timer
[ 2.070220] libphy: stmmac: probed
[ 2.073617] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 2.080069] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.086727] PPP generic driver version 2.4.2
[ 2.091476] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 2.097794] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[ 2.109004] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2.118223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124792] ehci-pci: EHCI PCI platform driver
[ 2.129615] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.135168] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.143024] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.160007] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.166315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.173120] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.180339] usb usb1: Product: EHCI Host Controller
[ 2.185195] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd
[ 2.191633] usb usb1: SerialNumber: 40200100.ehci
[ 2.197286] hub 1-0:1.0: USB hub found
[ 2.201144] hub 1-0:1.0: 2 ports detected
[ 2.206284] usbcore: registered new interface driver cdc_acm
[ 2.211978] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.220080] usbcore: registered new interface driver cdc_wdm
[ 2.225886] usbcore: registered new interface driver usb-storage
[ 2.232102] usbcore: registered new interface driver usbserial
[ 2.237967] usbcore: registered new interface driver usbserial_generic
[ 2.244564] usbserial: USB Serial support registered for generic
[ 2.251043] mousedev: PS/2 mouse device common for all mice
[ 2.256770] i2c /dev entries driver
[ 2.261680] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.267297] usbcore: registered new interface driver usbhid
[ 2.272906] usbhid: USB HID core driver
[ 2.278727] NET: Registered protocol family 10
[ 2.290150] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.300928] sit: IPv6 over IPv4 tunneling driver
[ 2.306572] NET: Registered protocol family 17
[ 2.311272] Key type dns_resolver registered
[ 2.316910] registered taskstats version 1
[ 2.321072] Loading compiled-in X.509 certificates
[ 2.325964] zswap: loaded using pool lzo/zbud
[ 2.345136] Key type encrypted registered
[ 2.352494] Freeing unused kernel memory: 224K (c0828000 - c0860000)
Loading, please wait...
[ 2.520104] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
starting version 232
[ 2.536842] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.548198] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.548679] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.551096] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.551278] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.552424] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.553497] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.557483] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.558499] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.559470] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.722104] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.728793] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.753461] usb 1-1: Product: USB2.0 Hub
[ 2.771361] hub 1-1:1.0: USB hub found
[ 2.780259] hub 1-1:1.0: 4 ports detected
[ 2.898042] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0
[ 3.070123] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci
[ 3.191178] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530
[ 3.198033] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.205404] usb 1-1.3: Product: Cruzer
[ 3.209139] usb 1-1.3: Manufacturer: SanDisk
[ 3.213434] usb 1-1.3: SerialNumber: 4C530001170203104075
[ 3.222922] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 3.229693] scsi host1: usb-storage 1-1.3:1.0
[ 3.249687] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[ 4.231667] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 6
[ 4.248087] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 4.258035] sd 1:0:0:0: [sda] Write Protect is off
[ 4.267919] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.288734] sda: sda1
[ 4.301785] sd 1:0:0:0: [sda] Attached SCSI removable disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 14014/958464 files, 205850/3828224 blocks
done.
[ 13.694909] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[ ok ] Waiting for /dev to be fully populated...done.
[ ok ] Activating swap...done.
[ 17.598540] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.546787] random: nonblocking pool is initialized
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.29.2
done.
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Mounting local filesystems...done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/00:25:31:01:0c:d5
Sending on LPF/eth0/00:25:31:01:0c:d5
Sending on Socket/fallback
DHCPREQUEST of 192.168.0.16 on eth0 to 255.255.255.255 port 67
[ 47.200158] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
DHCPREQUEST of 192.168.0.16 on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
DHCPOFFER of 192.168.5.97 from 192.168.5.72
DHCPACK of 192.168.5.97 from 192.168.5.72
bound to 192.168.5.97 -- renewal in 17070 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1249 (syslogd)
. ok
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting system message bus: dbus.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1244 (klogd)
. ok
[ ok ] Starting NTP server: ntpd.
Debian GNU/Linux 9 debian ttyS0
debian login: root
Password:
Last login: Tue Aug 1 17:15:07 PDT 2017 from 192.168.0.220 on pts/0
Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~#
root@debian:~#
root@debian:~#
root@debian:~#
root@debian:~#
root@debian:~#
root@debian:~#
root@debian:~# printenv
LANG=C
HUSHLOGIN=FALSE
USER=root
PWD=/root
HOME=/root
MAIL=/var/mail/root
SHELL=/bin/bash
TERM=linux
SHLVL=1
LOGNAME=root
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
_=/usr/bin/printenv
root@debian:~#
this is where I am so far:) had an issue with Ubuntu locking my username and password out so I had to re-install that as well, glad I posted most of the logs down as I was able to track down enough to re-install:)
now I should be able to install the new kernel:) I will keep you posted.
Thanks Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 28, 2018 06:06PM |
Admin Registered: 13 years ago Posts: 18,550 |
> I went ahead and created the new
> boot usb , I was able to log back into debian
Cool!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> boot usb , I was able to log back into debian
Cool!
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 28, 2018 06:28PM |
Registered: 6 years ago Posts: 178 |
Bodhi, This went much better, I do have some questions though:
here is one question why does this hang for a long time before uncompressing linux, like below, is that normal?
Thanks I am taking a break for a while, check in later and as always no big hurry,lol....
Echowarrior108
alienwar@alienwar-M17xR4:~$ sudo su [sudo] password for alienwar: root@alienwar-M17xR4:/home/alienwar# picocom -b 115200 /dev/ttyUSB0 picocom v2.2 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no nolock is : no send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.54-oxnas-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug V3 Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17696 r8192 d23264 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 116204K/131072K available (6410K kernel code, 288K rwdata, 1908K rodata, 224K init, 247K bss, 14868K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0827e14 (8320 kB) [ 0.000000] .init : 0xc0828000 - 0xc0860000 ( 224 kB) [ 0.000000] .data : 0xc0860000 - 0xc08a8378 ( 289 kB) [ 0.000000] .bss : 0xc08a8378 - 0xc08e6350 ( 248 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000007] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000163] Console: colour dummy device 80x30 [ 0.000197] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050017] pid_max: default: 32768 minimum: 301 [ 0.050191] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050209] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051020] Initializing cgroup subsys net_cls [ 0.051102] CPU: Testing write buffer coherency: ok [ 0.051525] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.190131] Brought up 2 CPUs [ 0.190154] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.190929] devtmpfs: initialized [ 0.196001] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.196047] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.196364] prandom: seed boundary self test passed [ 0.200783] prandom: 100 self tests passed [ 0.200808] pinctrl core: initialized pinctrl subsystem [ 0.201689] NET: Registered protocol family 16 [ 0.202232] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230013] cpuidle: using governor ladder [ 0.260008] cpuidle: using governor menu [ 0.265064] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.265448] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.266009] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.388807] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5 [ 0.388928] oxnas-pcie 47c00000.pcie-controller: link up [ 0.389253] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00 [ 0.389283] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.389304] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.389322] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 0.389342] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.389882] PCI: bus0: Fast back to back transfers disabled [ 0.390039] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.390517] vgaarb: loaded [ 0.391006] SCSI subsystem initialized [ 0.391879] usbcore: registered new interface driver usbfs [ 0.391987] usbcore: registered new interface driver hub [ 0.392138] usbcore: registered new device driver usb [ 0.392343] pps_core: LinuxPPS API ver. 1 registered [ 0.392358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.392404] PTP clock support registered [ 0.394531] clocksource: Switched to clocksource rps_clocksource_timer [ 0.413350] NET: Registered protocol family 2 [ 0.414248] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.414292] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.414325] TCP: Hash tables configured (established 1024 bind 1024) [ 0.414423] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.414464] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.414727] NET: Registered protocol family 1 [ 0.415257] RPC: Registered named UNIX socket transport module. [ 0.415278] RPC: Registered udp transport module. [ 0.415288] RPC: Registered tcp transport module. [ 0.415298] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.415695] Unpacking initramfs... [ 0.891008] Freeing initrd memory: 4488K (c79c4000 - c7e26000) [ 0.892538] Initialise system trusted keyring [ 0.922754] zbud: loaded [ 0.941365] NFS: Registering the id_resolver key type [ 0.941440] Key type id_resolver registered [ 0.941455] Key type id_legacy registered [ 0.941501] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.941527] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.942430] fuse init (API version 7.23) [ 0.944491] Key type big_key registered [ 1.032829] Key type asymmetric registered [ 1.032862] Asymmetric key parser 'x509' registered [ 1.032988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.033013] io scheduler noop registered [ 1.033031] io scheduler deadline registered [ 1.033093] io scheduler cfq registered (default) [ 1.033745] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.035264] console [ttyS0] disabled [ 1.035358] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A [ 1.614737] console [ttyS0] enabled [ 1.629496] loop: module loaded [ 1.881520] scsi host0: sata_oxnas [ 1.934750] ata1: SATA max UDMA/133 irq 7 [ 1.938841] sata_oxnas: resetting SATA core [ 1.939880] nand: Could not find valid ONFI parameter page; aborting [ 1.939921] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.939929] nand: Hynix NAND 128MiB 3,3V 8-bit [ 1.939937] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.939955] Scanning device for bad blocks [ 1.960133] Bad eraseblock 249 at 0x000001f20000 [ 2.022835] 2 ofpart partitions found on MTD device 41000000.nand [ 2.028902] Creating 2 MTD partitions on "41000000.nand": [ 2.034316] 0x000000000000-0x000000e00000 : "boot" [ 2.041057] 0x000000e00000-0x000008000000 : "data" [ 2.048304] oxnas-gmac 40400000.ethernet: no reset control found [ 2.054328] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 2.059351] Ring mode enabled [ 2.062402] DMA HW capability register supported [ 2.066908] Enhanced/Alternate descriptors [ 2.071252] Enabled extended descriptors [ 2.075238] RX Checksum Offload Engine supported (type 2) [ 2.080704] TX Checksum insertion supported [ 2.084945] Wake-Up On Lan supported [ 2.088586] Enable RX Mitigation via HW Watchdog Timer [ 2.109084] libphy: stmmac: probed [ 2.112527] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 2.118937] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 2.125747] PPP generic driver version 2.4.2 [ 2.130475] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 2.136788] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 2.147985] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [ 2.157104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.163673] ehci-pci: EHCI PCI platform driver [ 2.168488] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 2.174026] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 2.181862] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100 [ 2.200145] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 2.206451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.213245] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.220449] usb usb1: Product: EHCI Host Controller [ 2.225305] usb usb1: Manufacturer: Linux 4.4.54-oxnas-tld-1 ehci_hcd [ 2.231731] usb usb1: SerialNumber: 40200100.ehci [ 2.237399] hub 1-0:1.0: USB hub found [ 2.241256] hub 1-0:1.0: 2 ports detected [ 2.246369] usbcore: registered new interface driver cdc_acm [ 2.252044] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.260160] usbcore: registered new interface driver cdc_wdm [ 2.265966] usbcore: registered new interface driver usb-storage [ 2.272181] usbcore: registered new interface driver usbserial [ 2.278051] usbcore: registered new interface driver usbserial_generic [ 2.284656] usbserial: USB Serial support registered for generic [ 2.291107] mousedev: PS/2 mouse device common for all mice [ 2.296834] i2c /dev entries driver [ 2.301706] hidraw: raw HID events driver (C) Jiri Kosina [ 2.307340] usbcore: registered new interface driver usbhid [ 2.312924] usbhid: USB HID core driver [ 2.318822] NET: Registered protocol family 10 [ 2.330027] ata1: SATA link down (SStatus 0 SControl 300) [ 2.340881] sit: IPv6 over IPv4 tunneling driver [ 2.346521] NET: Registered protocol family 17 [ 2.351480] Key type dns_resolver registered [ 2.357017] registered taskstats version 1 [ 2.361172] Loading compiled-in X.509 certificates [ 2.366056] zswap: loaded using pool lzo/zbud [ 2.385221] Key type encrypted registered [ 2.402864] Freeing unused kernel memory: 224K (c0828000 - c0860000) Loading, please wait... [ 2.570206] usb 1-1: new high-speed USB device number 2 using oxnas-ehci starting version 232 [ 2.593169] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.603837] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.604247] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.624934] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.634439] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.644899] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.655224] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.668431] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.678617] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.688788] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.732165] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.738846] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.760202] usb 1-1: Product: USB2.0 Hub [ 2.770652] hub 1-1:1.0: USB hub found [ 2.774835] hub 1-1:1.0: 4 ports detected [ 3.018022] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0 [ 3.061591] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci [ 3.182056] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530 [ 3.188915] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.202024] usb 1-1.3: Product: Cruzer [ 3.205772] usb 1-1.3: Manufacturer: SanDisk [ 3.210027] usb 1-1.3: SerialNumber: 4C530001170203104075 [ 3.222341] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 3.244963] scsi host1: usb-storage 1-1.3:1.0 [ 3.392358] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 4.241384] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 6 [ 4.257162] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.266490] sd 1:0:0:0: [sda] Write Protect is off [ 4.300838] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.318126] sda: sda1 [ 4.325352] sd 1:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 14105/958464 files, 234731/3828224 blocks done. [ 15.155402] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [ 18.693824] random: nonblocking pool is initialized [ ok ] Activating swap...done. [ 19.097259] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.29.2 done. [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:0c:d5 Sending on LPF/eth0/00:25:31:01:0c:d5 Sending on Socket/fallback DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67 [ 27.700160] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67 DHCPOFFER of 192.168.5.97 from 192.168.5.72 DHCPACK of 192.168.5.97 from 192.168.5.72 bound to 192.168.5.97 -- renewal in 19365 seconds. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1244 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting system message bus: dbus. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1243 (klogd) . ok [ ok ] Starting NTP server: ntpd. Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Wed Mar 28 15:37:42 PDT 2018 on ttyS0 Linux debian 4.4.54-oxnas-tld-1 #2 SMP PREEMPT Sat Mar 18 23:09:58 PDT 2017 armv6l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# cd /boot root@debian:/boot# tar -xjf linux-4.4.123-oxnas-tld-1.bodhi.tar.bz2 root@debian:/boot# root@debian:/boot# ls . .. System.map-4.4.54-oxnas-tld-1 config-4.4.117-oxnas-tld-1 config-4.4.123-oxnas-tld-1 config-4.4.54-oxnas-tld-1 dts initrd.img-4.4.54-oxnas-tld-1 linux-4.4.117-oxnas-tld-1.patch linux-4.4.123-oxnas-tld-1.bodhi.tar.bz2 linux-4.4.123-oxnas-tld-1.patch linux-4.4.54-oxnas-tld-1.patch linux-dtb-4.4.117-oxnas-tld-1.tar linux-dtb-4.4.123-oxnas-tld-1.tar linux-dtb-4.4.54-oxnas-tld-1.tar linux-headers-4.4.117-oxnas-tld-1_1.0_armel.deb linux-headers-4.4.123-oxnas-tld-1_1.0_armel.deb linux-headers-4.4.54-oxnas-tld-1_1.0_armel.deb linux-image-4.4.117-oxnas-tld-1_1.0_armel.deb linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb linux-image-4.4.54-oxnas-tld-1_1.0_armel.deb uImage uInitrd vmlinuz-4.4.54-oxnas-tld-1 zImage-4.4.117-oxnas-tld-1 zImage-4.4.123-oxnas-tld-1 zImage-4.4.54-oxnas-tld-1 root@debian:/boot# apt-get remove flash-kernel Reading package lists... Done Building dependency tree Reading state information... Done Package 'flash-kernel' is not installed, so not removed The following packages were automatically installed and are no longer required: libapt-pkg4.12 libbind9-80 libdb5.1 libdns88 libgcrypt11 libgnutls26 libgssglue1 libisc84 libisccc80 libisccfg82 liblwres80 libprocps0 libssl1.0.0 libsystemd-login0 libtasn1-3 Use 'apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@debian:/boot# dpkg -i linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb Selecting previously unselected package linux-image-4.4.123-oxnas-tld-1. (Reading database ... 12150 files and directories currently installed.) Preparing to unpack linux-image-4.4.123-oxnas-tld-1_1.0_armel.deb ... Examining /etc/kernel/preinst.d/ Done. Unpacking linux-image-4.4.123-oxnas-tld-1 (1.0) ... Setting up linux-image-4.4.123-oxnas-tld-1 (1.0) ... Hmm. There is a symbolic link /lib/modules/4.4.123-oxnas-tld-1/build However, I can not read it: No such file or directory Therefore, I am deleting /lib/modules/4.4.123-oxnas-tld-1/build Hmm. The package shipped with a symbolic link /lib/modules/4.4.123-oxnas-tld-1/source However, I can not read the target: No such file or directory Therefore, I am deleting /lib/modules/4.4.123-oxnas-tld-1/source Running depmod. Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.123-oxnas-tld-1 /boot/vmlinuz-4.4.123-oxnas-tld-1 run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.123-oxnas-tld-1 /boot/vmlinuz-4.4.123-oxnas-tld-1 update-initramfs: Generating /boot/initrd.img-4.4.123-oxnas-tld-1 run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 4.4.123-oxnas-tld-1 /boot/vmlinuz-4.4.123-oxnas-tld-1 root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# root@debian:/boot# mv uImage uImage.bak root@debian:/boot# mv uInitrd uInitrd.bak root@debian:/boot# mkimage -A arm -O linux -T kernel -C none -a 0x60008000 -e 0x60008000 -n Linux-4.4.123-oxnas-tld-1 -d vmlinuz-4.4.123-oxnas-tld-1 uImage Image Name: Linux-4.4.123-oxnas-tld-1 Created: Wed Mar 28 15:55:42 2018 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4119232 Bytes = 4022.69 kB = 3.93 MB Load Address: 60008000 Entry Point: 60008000 root@debian:/boot# mkimage -A arm -O linux -T ramdisk -C gzip -a 0x60000000 -e 0x60000000 -n initramfs-4.4.123-oxnas-tld-1 -d initrd.img-4.4.123-oxnas-tld-1 uInitrd Image Name: initramfs-4.4.123-oxnas-tld-1 Created: Wed Mar 28 15:56:00 2018 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4596357 Bytes = 4488.63 kB = 4.38 MB Load Address: 60000000 Entry Point: 60000000 root@debian:/boot# sync root@debian:/boot# cd .. root@debian:/# sync root@debian:/# fw_printenv bootcmd=run dt_bootcmd_usb bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr dt_load_dtb=ext2load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb dt_load_initrd=ext4load usb 0:1 $uinitrd_addr /boot/uInitrd dt_load_uimage=ext2load usb 0:1 $uimage_addr /boot/uImage dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot dtb_addr=0x62c00000 dtb_file=/boot/dts/ox820-pogoplug-pro.dtb ethact=dwmac.40400000 ethaddr=00:25:31:01:0C:D5 if_netconsole=ping $serverip ipaddr=192.168.5.97 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) nc_ready=0 preboot=run preboot_nc preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.5.72 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uimage_addr=0x60500000 uinitrd_addr=0x60e00000 usb_custom_params=zswap.enabled=1 usb_ready_retry=15 usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 root@debian:/# reboot Broadcast message from root@debian (ttyS0) (Wed Mar 28 15:57:21 2018): The system is going down for reboot NOW! INIT: Switching to runlevel: 6 INIT: Sending processe[info] Using makefile-style concurrent boot in runlevel 6. [....] Stopping busybox' klogd implementation: klogd1243 (klogd) Stopped klogd (pid 1243). . ok [ ok ] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon. [....] Stopping busybox' syslogd implementation: syslogd1244 (syslogd) . ok [ ok ] Stopping NFS kernel daemon: mountd nfsd. [ ok ] Unexporting directories for NFS kernel daemon.... [ ok ] Asking all remaining processes to terminate...done. [ ok ] All processes ended within 1 seconds...done. [ ok ] Stopping RPC port mapper daemon: rpcbind. [ ok ] Stopping NFS common utilities: idmapd statd. [....] Deconfiguring network interfaces...Removed stale PID file Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:0c:d5 Sending on LPF/eth0/00:25:31:01:0c:d5 Sending on Socket/fallback DHCPRELEASE on eth0 to 192.168.5.72 port 67 done. [ ok ] Unmounting temporary filesystems...done. [ ok ] Deactivating swap...done. [ 464.222824] EXT4-fs (sda1): re-mounted. Opts: (null) [info] Will now restart. [ 466.361794] reboot: Restarting system U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.123-oxnas-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Thu Mar 22 18:06:35 PDT 2018 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug V3 Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17612 r8192 d23348 u49152 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 117264K/131072K available (5693K kernel code, 285K rwdata, 1568K rodata, 224K init, 243K bss, 13808K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc071f850 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0758000 ( 224 kB) [ 0.000000] .data : 0xc0758000 - 0xc079f638 ( 286 kB) [ 0.000000] .bss : 0xc079f638 - 0xc07dc4d8 ( 244 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000153] Console: colour dummy device 80x30 [ 0.000184] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050014] pid_max: default: 32768 minimum: 301 [ 0.050183] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050204] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051018] Initializing cgroup subsys net_cls [ 0.051097] CPU: Testing write buffer coherency: ok [ 0.051525] Setting up static identity map for 0x60008220 - 0x60008258 [ 0.190133] Brought up 2 CPUs [ 0.190156] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.190952] devtmpfs: initialized [ 0.195637] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.195681] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.195983] prandom: seed boundary self test passed [ 0.200394] prandom: 100 self tests passed [ 0.200422] pinctrl core: initialized pinctrl subsystem [ 0.201239] NET: Registered protocol family 16 [ 0.201768] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.230021] cpuidle: using governor ladder [ 0.260014] cpuidle: using governor menu [ 0.264939] gpio-oxnas 44000000.gpio: at address c8848000 [ 0.265315] gpio-oxnas 44100000.gpio: at address c884a000 [ 0.265856] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.387420] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5 [ 0.387502] oxnas-pcie 47c00000.pcie-controller: link up [ 0.387822] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00 [ 0.387847] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff] [ 0.387863] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref] [ 0.387878] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] [ 0.387896] pci_bus 0000:00: root bus resource [bus 00-7f] [ 0.388405] PCI: bus0: Fast back to back transfers disabled [ 0.388492] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff] [ 0.388948] vgaarb: loaded [ 0.389429] SCSI subsystem initialized [ 0.390348] usbcore: registered new interface driver usbfs [ 0.390453] usbcore: registered new interface driver hub [ 0.390622] usbcore: registered new device driver usb [ 0.390842] pps_core: LinuxPPS API ver. 1 registered [ 0.390858] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.390901] PTP clock support registered [ 0.392192] clocksource: Switched to clocksource rps_clocksource_timer [ 0.409799] NET: Registered protocol family 2 [ 0.410918] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.410964] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.411000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.411102] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.411146] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.411404] NET: Registered protocol family 1 [ 0.411878] RPC: Registered named UNIX socket transport module. [ 0.411896] RPC: Registered udp transport module. [ 0.411906] RPC: Registered tcp transport module. [ 0.411916] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.412308] Unpacking initramfs... [ 0.885496] Freeing initrd memory: 4492K [ 0.886924] Initialise system trusted keyring [ 0.912655] zbud: loaded [ 0.931351] NFS: Registering the id_resolver key type [ 0.931417] Key type id_resolver registered [ 0.931430] Key type id_legacy registered [ 0.931473] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.931496] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.932377] fuse init (API version 7.23) [ 0.934307] Key type big_key registered [ 1.032862] Key type asymmetric registered [ 1.032896] Asymmetric key parser 'x509' registered [ 1.033024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.033049] io scheduler noop registered [ 1.033070] io scheduler deadline registered [ 1.033126] io scheduler cfq registered (default) [ 1.033784] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 1.035256] console [ttyS0] disabled [ 1.035353] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A [ 1.614233] console [ttyS0] enabled [ 1.628907] loop: module loaded [ 1.880896] scsi host0: sata_oxnas [ 1.934095] ata1: SATA max UDMA/133 irq 7 [ 1.938188] sata_oxnas: resetting SATA core [ 1.939225] nand: Could not find valid ONFI parameter page; aborting [ 1.939269] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 1.939274] nand: Hynix NAND 128MiB 3,3V 8-bit [ 1.939281] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.939317] Scanning device for bad blocks [ 1.959232] Bad eraseblock 249 at 0x000001f20000 [ 2.020999] 2 ofpart partitions found on MTD device 41000000.nand [ 2.027066] Creating 2 MTD partitions on "41000000.nand": [ 2.032476] 0x000000000000-0x000000e00000 : "boot" [ 2.039052] 0x000000e00000-0x000008000000 : "data" [ 2.046310] oxnas-gmac 40400000.ethernet: no reset control found [ 2.052331] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 2.057354] Ring mode enabled [ 2.060408] DMA HW capability register supported [ 2.064911] Enhanced/Alternate descriptors [ 2.069237] Enabled extended descriptors [ 2.073239] RX Checksum Offload Engine supported (type 2) [ 2.078691] TX Checksum insertion supported [ 2.082949] Wake-Up On Lan supported [ 2.086589] Enable RX Mitigation via HW Watchdog Timer [ 2.124554] libphy: stmmac: probed [ 2.127951] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active [ 2.134415] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03) [ 2.141127] PPP generic driver version 2.4.2 [ 2.145704] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.152268] ehci-pci: EHCI PCI platform driver [ 2.157073] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 2.162636] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 2.170470] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100 [ 2.190136] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 2.196431] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.203225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.210429] usb usb1: Product: EHCI Host Controller [ 2.215280] usb usb1: Manufacturer: Linux 4.4.123-oxnas-tld-1 ehci_hcd [ 2.221790] usb usb1: SerialNumber: 40200100.ehci [ 2.227402] hub 1-0:1.0: USB hub found [ 2.231257] hub 1-0:1.0: 2 ports detected [ 2.236244] usbcore: registered new interface driver cdc_wdm [ 2.242112] usbcore: registered new interface driver usb-storage [ 2.248273] usbcore: registered new interface driver usbserial [ 2.254192] usbcore: registered new interface driver usbserial_generic [ 2.260779] usbserial: USB Serial support registered for generic [ 2.267194] mousedev: PS/2 mouse device common for all mice [ 2.272980] i2c /dev entries driver [ 2.277678] hidraw: raw HID events driver (C) Jiri Kosina [ 2.283333] usbcore: registered new interface driver usbhid [ 2.288878] usbhid: USB HID core driver [ 2.294658] NET: Registered protocol family 10 [ 2.300505] sit: IPv6 over IPv4 tunneling driver [ 2.306094] NET: Registered protocol family 17 [ 2.310740] Key type dns_resolver registered [ 2.316239] registered taskstats version 1 [ 2.320412] Loading compiled-in X.509 certificates [ 2.325301] zswap: loaded using pool lzo/zbud [ 2.330012] ata1: SATA link down (SStatus 0 SControl 300) [ 2.348646] Key type encrypted registered [ 2.353633] hctosys: unable to open rtc device (rtc0) [ 2.361098] Freeing unused kernel memory: 224K Loading, please wait... starting version 232 [ 2.533109] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.544442] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.545146] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.547292] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.547589] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.548579] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.549616] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.553687] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.554664] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.555627] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available) [ 2.560163] usb 1-1: new high-speed USB device number 2 using oxnas-ehci [ 2.732198] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.738905] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.778731] usb 1-1: Product: USB2.0 Hub [ 2.811399] hub 1-1:1.0: USB hub found [ 2.817216] hub 1-1:1.0: 4 ports detected [ 3.112225] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci [ 3.231252] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530 [ 3.238105] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.245416] usb 1-1.3: Product: Cruzer [ 3.249146] usb 1-1.3: Manufacturer: SanDisk [ 3.253416] usb 1-1.3: SerialNumber: 4C530001170203104075 [ 3.262842] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 3.269626] scsi host1: usb-storage 1-1.3:1.0 [ 3.292177] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 4.271372] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 6 [ 4.286686] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB) [ 4.297620] sd 1:0:0:0: [sda] Write Protect is off [ 4.307878] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.329538] sda: sda1 [ 4.341716] sd 1:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 rootfs: clean, 15593/958464 files, 252902/3828224 blocks done. [ 13.607377] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [ 16.259171] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142) [ 16.269926] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected [ 16.304875] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected [....] Waiting for /dev to be fully populated...[ 16.643079] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0 done. [ ok ] Activating swap...done. [ 17.591150] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 18.530936] random: nonblocking pool is initialized [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.29.2 done. [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ 23.050283] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:25:31:01:0c:d5 Sending on LPF/eth0/00:25:31:01:0c:d5 Sending on Socket/fallback DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.5.97 from 192.168.5.72 bound to 192.168.5.97 -- renewal in 21204 seconds. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1238 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting system message bus: dbus. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1241 (klogd) . ok [ ok ] Starting NTP server: ntpd. Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Wed Mar 28 15:52:12 PDT 2018 on ttyS0 Linux debian 4.4.123-oxnas-tld-1 #1 SMP PREEMPT Thu Mar 22 18:06:35 PDT 2018 armv6l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# printenv LANG=C HUSHLOGIN=FALSE USER=root PWD=/root HOME=/root MAIL=/var/mail/root SHELL=/bin/bash TERM=linux SHLVL=1 LOGNAME=root PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin _=/usr/bin/printenv root@debian:~#
here is one question why does this hang for a long time before uncompressing linux, like below, is that normal?
Terminal ready U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 dwmac.40400000 Waiting for PHY auto negotiation to complete.. done Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Speed: 1000, full duplex Using dwmac.40400000 device host 192.168.5.72 is alive Uncompressing Linux... done, booting the kernel.
Thanks I am taking a break for a while, check in later and as always no big hurry,lol....
Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions March 28, 2018 06:38PM |
Registered: 6 years ago Posts: 178 |
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 03, 2018 05:12PM |
Registered: 6 years ago Posts: 178 |
Hi Bodhi, Well so far I have loaded Samba and it works quite well on my network, I can see the drives after a lot of setup however when I have to reboot it seems the only way to boot is to first unplug the other usb ports and disconnect the ethernet , and wait until it fully loads then plug them and an mount them all manually again, kinda a pain so my question is how do I set up to reboot without all the drama? :)
I did attach ethernet in progress because it hangs unless I plug it in, I have not at this point plugged in usb devices, now I will attach each device starting with USB 500tb drive (sdb) and it just hangs where it stops:
Also a note, I bored a hole in the back of the unit case to accommodate the sata and serial cables so I don't have to rip it open and leave a mess all over my desk, lol:)
Any suggestions or links would help,
thanks Echowarrior108
# picocom -b 115200 /dev/ttyUSB0picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
dwmac.40400000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
dwmac.40400000: No link.
ping failed; host 192.168.5.72 is not alive
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
4119448 bytes read in 335 ms (11.7 MiB/s)
4596388 bytes read in 387 ms (11.3 MiB/s)
7067 bytes read in 194 ms (35.2 KiB/s)
## Booting kernel from Legacy Image at 60500000 ...
Image Name: Linux-4.4.124-oxnas-tld-1
Created: 2018-03-31 23:59:44 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4119384 Bytes = 3.9 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 60e00000 ...
Image Name: initramfs-4.4.124-oxnas-tld-1
Created: 2018-04-01 0:00:00 UTC
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4596324 Bytes = 4.4 MiB
Load Address: 60000000
Entry Point: 60000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 62c00000
Booting using the fdt blob at 0x62c00000
Loading Kernel Image ... OK
Loading Ramdisk to 679c4000, end 67e26264 ... OK
Loading Device Tree to 679bf000, end 679c3b9a ... OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.124-oxnas-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT Wed Mar 28 22:46:38 PDT 2018
[ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Pogoplug V3 Pro
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
[ 0.000000] PERCPU: Embedded 12 pages/cpu @c7eda000 s17612 r8192 d23348 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 117264K/131072K available (5693K kernel code, 285K rwdata, 1568K rodata, 224K init, 243K bss, 13808K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc071f858 (7263 kB)
[ 0.000000] .init : 0xc0720000 - 0xc0758000 ( 224 kB)
[ 0.000000] .data : 0xc0758000 - 0xc079f638 ( 286 kB)
[ 0.000000] .bss : 0xc079f638 - 0xc07dc4d8 ( 244 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:160
[ 0.000000] clocksource: rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns
[ 0.000010] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns
[ 0.000151] Console: colour dummy device 80x30
[ 0.000181] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744)
[ 0.050019] pid_max: default: 32768 minimum: 301
[ 0.050186] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.050206] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.051020] Initializing cgroup subsys net_cls
[ 0.051100] CPU: Testing write buffer coherency: ok
[ 0.051530] Setting up static identity map for 0x60008220 - 0x60008258
[ 0.190136] Brought up 2 CPUs
[ 0.190159] SMP: Total of 2 processors activated (678.29 BogoMIPS).
[ 0.190955] devtmpfs: initialized
[ 0.195832] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.195875] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.196188] prandom: seed boundary self test passed
[ 0.200599] prandom: 100 self tests passed
[ 0.200627] pinctrl core: initialized pinctrl subsystem
[ 0.201459] NET: Registered protocol family 16
[ 0.201986] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.230018] cpuidle: using governor ladder
[ 0.260011] cpuidle: using governor menu
[ 0.265026] gpio-oxnas 44000000.gpio: at address c8848000
[ 0.265405] gpio-oxnas 44100000.gpio: at address c884a000
[ 0.265950] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver
[ 0.387719] oxnas-pcie 47c00000.pcie-controller: PCIe version/deviceID 0x82510b5
[ 0.387840] oxnas-pcie 47c00000.pcie-controller: link up
[ 0.388165] oxnas-pcie 47c00000.pcie-controller: PCI host bridge to bus 0000:00
[ 0.388190] pci_bus 0000:00: root bus resource [mem 0x48000000-0x49ffffff]
[ 0.388208] pci_bus 0000:00: root bus resource [mem 0x4a000000-0x4bdfffff pref]
[ 0.388226] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
[ 0.388244] pci_bus 0000:00: root bus resource [bus 00-7f]
[ 0.388748] PCI: bus0: Fast back to back transfers disabled
[ 0.388835] pci 0000:00:00.0: BAR 0: assigned [mem 0x48000000-0x4800ffff]
[ 0.389281] vgaarb: loaded
[ 0.389757] SCSI subsystem initialized
[ 0.390686] usbcore: registered new interface driver usbfs
[ 0.390791] usbcore: registered new interface driver hub
[ 0.390958] usbcore: registered new device driver usb
[ 0.391180] pps_core: LinuxPPS API ver. 1 registered
[ 0.391196] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.391239] PTP clock support registered
[ 0.392517] clocksource: Switched to clocksource rps_clocksource_timer
[ 0.410672] NET: Registered protocol family 2
[ 0.411735] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.411776] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.411811] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.411911] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.411952] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.412203] NET: Registered protocol family 1
[ 0.412679] RPC: Registered named UNIX socket transport module.
[ 0.412702] RPC: Registered udp transport module.
[ 0.412712] RPC: Registered tcp transport module.
[ 0.412723] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.413114] Unpacking initramfs...
[ 0.886346] Freeing initrd memory: 4492K
[ 0.887782] Initialise system trusted keyring
[ 0.900748] zbud: loaded
[ 0.921320] NFS: Registering the id_resolver key type
[ 0.921392] Key type id_resolver registered
[ 0.921405] Key type id_legacy registered
[ 0.921451] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.921474] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.922360] fuse init (API version 7.23)
[ 0.924285] Key type big_key registered
[ 1.032990] Key type asymmetric registered
[ 1.033021] Asymmetric key parser 'x509' registered
[ 1.033146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.033175] io scheduler noop registered
[ 1.033192] io scheduler deadline registered
[ 1.033251] io scheduler cfq registered (default)
[ 1.033909] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 1.035404] console [ttyS0] disabled
[ 1.035502] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 6, base_baud = 390625) is a 16550A
[ 1.614497] console [ttyS0] enabled
[ 1.667537] loop: module loaded
[ 1.919454] scsi host0: sata_oxnas
[ 1.972702] ata1: SATA max UDMA/133 irq 7
[ 1.976793] sata_oxnas: resetting SATA core
[ 1.977835] nand: Could not find valid ONFI parameter page; aborting
[ 1.977876] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
[ 1.977881] nand: Hynix NAND 128MiB 3,3V 8-bit
[ 1.977889] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.977917] Scanning device for bad blocks
[ 1.997916] Bad eraseblock 249 at 0x000001f20000
[ 2.059786] 2 ofpart partitions found on MTD device 41000000.nand
[ 2.065876] Creating 2 MTD partitions on "41000000.nand":
[ 2.071283] 0x000000000000-0x000000e00000 : "boot"
[ 2.077900] 0x000000e00000-0x000008000000 : "data"
[ 2.085166] oxnas-gmac 40400000.ethernet: no reset control found
[ 2.091187] stmmac - user ID: 0x12, Synopsys ID: 0x35
[ 2.096207] Ring mode enabled
[ 2.099243] DMA HW capability register supported
[ 2.103774] Enhanced/Alternate descriptors
[ 2.108106] Enabled extended descriptors
[ 2.112107] RX Checksum Offload Engine supported (type 2)
[ 2.117560] TX Checksum insertion supported
[ 2.121820] Wake-Up On Lan supported
[ 2.125460] Enable RX Mitigation via HW Watchdog Timer
[ 2.164428] libphy: stmmac: probed
[ 2.167825] eth%d: PHY ID 001cc914 at 0 IRQ POLL (stmmac-0:00) active
[ 2.174287] eth%d: PHY ID 001cc914 at 3 IRQ POLL (stmmac-0:03)
[ 2.180961] PPP generic driver version 2.4.2
[ 2.185536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.192094] ehci-pci: EHCI PCI platform driver
[ 2.196922] oxnas-ehci 40200100.ehci: EHCI Host Controller
[ 2.202511] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
[ 2.210342] oxnas-ehci 40200100.ehci: irq 10, io mem 0x40200100
[ 2.230136] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
[ 2.236413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.243207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.250414] usb usb1: Product: EHCI Host Controller
[ 2.255270] usb usb1: Manufacturer: Linux 4.4.124-oxnas-tld-1 ehci_hcd
[ 2.261777] usb usb1: SerialNumber: 40200100.ehci
[ 2.267384] hub 1-0:1.0: USB hub found
[ 2.271234] hub 1-0:1.0: 2 ports detected
[ 2.276239] usbcore: registered new interface driver cdc_wdm
[ 2.282099] usbcore: registered new interface driver usb-storage
[ 2.288266] usbcore: registered new interface driver usbserial
[ 2.294187] usbcore: registered new interface driver usbserial_generic
[ 2.300774] usbserial: USB Serial support registered for generic
[ 2.307187] mousedev: PS/2 mouse device common for all mice
[ 2.312970] i2c /dev entries driver
[ 2.317701] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.323358] usbcore: registered new interface driver usbhid
[ 2.328906] usbhid: USB HID core driver
[ 2.334865] NET: Registered protocol family 10
[ 2.360696] sit: IPv6 over IPv4 tunneling driver
[ 2.366289] NET: Registered protocol family 17
[ 2.370007] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.376488] Key type dns_resolver registered
[ 2.382031] registered taskstats version 1
[ 2.386147] Loading compiled-in X.509 certificates
[ 2.391073] zswap: loaded using pool lzo/zbud
[ 2.409702] Key type encrypted registered
[ 2.414620] hctosys: unable to open rtc device (rtc0)
[ 2.421864] Freeing unused kernel memory: 224K
Loading, please wait...
starting version 232
[ 2.590310] usb 1-1: new high-speed USB device number 2 using oxnas-ehci
[ 2.603888] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.614760] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.615119] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.615344] random: systemd-udevd: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.645580] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.655078] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.665338] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.675678] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.688862] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.699082] random: udevadm: uninitialized urandom read (16 bytes read, 0 bits of entropy available)
[ 2.762027] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.768721] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.775889] usb 1-1: Product: USB2.0 Hub
[ 2.787445] hub 1-1:1.0: USB hub found
[ 2.796705] hub 1-1:1.0: 4 ports detected
[ 3.080225] usb 1-1.3: new high-speed USB device number 3 using oxnas-ehci
[ 3.204689] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5530
[ 3.213440] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.223449] usb 1-1.3: Product: Cruzer
[ 3.229706] usb 1-1.3: Manufacturer: SanDisk
[ 3.236462] usb 1-1.3: SerialNumber: 4C530001170203104075
[ 3.245788] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 3.272757] scsi host1: usb-storage 1-1.3:1.0
[ 3.327603] usbcore: registered new interface driver uas
Begin: Loading essential drivers ... done.
[ 4.271354] scsi 1:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 6
[ 4.287500] sd 1:0:0:0: [sda] 30629376 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 4.296862] sd 1:0:0:0: [sda] Write Protect is off
[ 4.307338] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.331361] sda: sda1
[ 4.338869] sd 1:0:0:0: [sda] Attached SCSI removable disk
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.29.2
[/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
rootfs: recovering journal
rootfs: clean, 32982/958464 files, 330764/3828224 blocks
done.
[ 13.868956] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 16.704028] rt2800pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 16.716398] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[ 16.737226] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 16.994293] rt2800pci 0000:00:00.0 wlp0s0: renamed from wlan0
done.
[ ok ] Activating swap...done.
[ 17.936826] random: nonblocking pool is initialized
[ 17.991257] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ ok ] Activating lvm and md swap...done.
[....] Checking file systems...fsck from util-linux 2.29.2
fsck.ext4: No such file or directory while trying to open /dev/sdb
Possibly non-existent device?
fsck.ext4: No such file or directory while trying to open /dev/sdb1
Possibly non-existent device?
fsck exited with status code 8
failed (code 8).
[....] File system check failed. A log is being saved in /var/log/fsck/checkfs i[FAILt location is writable. Please repair the file system manually. ... failed!
[....] A maintenance shell will now be started. CONTROL-D will terminate this sh[warnnd resume system boot. ... (warning).
Give root password for maintenance
(or press Control-D to continue): (note:pressed Control_D)
[ ok ] Loading kernel modules...done.
[ ok ] Cleaning up temporary files... /tmp.
[....] Mounting local filesystems...mount: /dev/sda1 is already mounted or /media busy
/dev/sda1 is already mounted on /
ntfs-3g: Failed to access volume '/dev/sdb2': No such file or directory
ntfs-3g 2016.2.22AR.1 integrated FUSE 28 - Third Generation NTFS Driver
Configuration type 7, XATTRS are on, POSIX ACLS are on
Copyright (C) 2005-2007 Yura Pakhuchiy
Copyright (C) 2006-2009 Szabolcs Szakacsits
Copyright (C) 2007-2016 Jean-Pierre Andre
Copyright (C) 2009 Erik Larsson
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), windows_names, uid=, gid=,
umask=, fmask=, dmask=, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
News, support and information: http://tuxera.com
mount: special device /dev/sdb does not exist
mount: unknown filesystem type 'linux-swap'
mount: special device /dev/sdb1 does not exist
ntfs-3g: Failed to access volume '/dev/sdc1': No such file or directory
ntfs-3g 2016.2.22AR.1 integrated FUSE 28 - Third Generation NTFS Driver
Configuration type 7, XATTRS are on, POSIX ACLS are on
Copyright (C) 2005-2007 Yura Pakhuchiy
Copyright (C) 2006-2009 Szabolcs Szakacsits
Copyright (C) 2007-2016 Jean-Pierre Andre
Copyright (C) 2009 Erik Larsson
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), windows_names, uid=, gid=,
umask=, fmask=, dmask=, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
News, support and information: http://tuxera.com
failed.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables...done.
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/eth0/00:25:31:01:0c:d5
Sending on LPF/eth0/00:25:31:01:0c:d5
Sending on Socket/fallback
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
[ 153.810311] oxnas-gmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10
DHCPREQUEST of 192.168.5.97 on eth0 to 255.255.255.255 port 67
DHCPOFFER of 192.168.5.97 from 192.168.5.72
DHCPACK of 192.168.5.97 from 192.168.5.72
invoke-rc.d: could not determine current runlevel
Reloading /etc/samba/smb.conf: smbd.
bound to 192.168.5.97 -- renewal in 20112 seconds.
done.
[ ok ] Starting RPC port mapper daemon: rpcbind.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
1322 (syslogd)
. ok
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting system message bus: dbus.
[....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
1317 (klogd)
. ok
[ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
[warn] Not starting NFS kernel daemon: no exports. ... (warning).
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Starting NetBIOS name server: nmbd.
[ ok ] Starting NTP server: ntpd.
[ ok ] Starting SMB/CIFS daemon: smbd.
Debian GNU/Linux 9 debian ttyS0
debian login: root
Password:
Last login: Wed Dec 31 16:03:29 PST 1969 on ttyS0
Linux debian 4.4.124-oxnas-tld-1 #1 SMP PREEMPT Wed Mar 28 22:46:38 PDT 2018 armv6l
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@debian:~# printevn
-bash: printevn: command not found
root@debian:~# fw_printenv
bootcmd=run dt_bootcmd_usb
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset
dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr
dt_load_dtb=ext4load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb
dt_load_initrd=ext4load usb 0:1 $uinitrd_addr /boot/uInitrd
dt_load_uimage=ext4load usb 0:1 $uimage_addr /boot/uImage
dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm
dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot
dtb_addr=0x62c00000
dtb_file=/boot/dts/ox820-pogoplug-pro.dtb
ethact=dwmac.40400000
ethaddr=00:25:31:01:0C:D5
if_netconsole=ping $serverip
ipaddr=192.168.5.97
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file
load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd
load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage
mainlineLinux=yes
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
nc_ready=0
preboot=run preboot_nc
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.5.72
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize
uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi
uimage_addr=0x60500000
uinitrd_addr=0x60e00000
usb_custom_params=zswap.enabled=1
usb_ready_retry=15
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
root@debian:~#
I did attach ethernet in progress because it hangs unless I plug it in, I have not at this point plugged in usb devices, now I will attach each device starting with USB 500tb drive (sdb) and it just hangs where it stops:
root@debian:~# [ 369.300080] usb 1-1.2: new high-speed USB device number 4 using oxnas-ehci [ 369.433008] usb 1-1.2: New USB device found, idVendor=0bc2, idProduct=3000 [ 369.439864] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 369.447485] usb 1-1.2: Product: FreeAgentDesktop [ 369.452136] usb 1-1.2: Manufacturer: Seagate [ 369.456391] usb 1-1.2: SerialNumber: 9QG0NYCM [ 369.473515] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 369.500290] scsi host2: usb-storage 1-1.2:1.0 [ 370.521748] scsi 2:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4 [ 370.543083] sd 2:0:0:0: [sdb] Spinning up disk... [ 380.890199] .ready [ 380.894842] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 380.904460] sd 2:0:0:0: [sdb] Write Protect is off [ 380.910968] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 380.945989] sdb: sdb1 [ 380.957335] sd 2:0:0:0: [sdb] Attached SCSI disk
Also a note, I bored a hole in the back of the unit case to accommodate the sata and serial cables so I don't have to rip it open and leave a mess all over my desk, lol:)
Any suggestions or links would help,
thanks Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 03, 2018 05:26PM |
Admin Registered: 13 years ago Posts: 18,550 |
Echowarrior108,
You have serial console so don't need netconsole, and that has slowed down the boot and difficult to troubleshoot. So at Debian shell, remove it.
And then make sure ethernet and all disks are plugged in as they should. Reboot, interrupt serial console at count down and
and go ahead and boot
Post the entire serial console log here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 04/03/2018 05:27PM by bodhi.
You have serial console so don't need netconsole, and that has slowed down the boot and difficult to troubleshoot. So at Debian shell, remove it.
fw_setenv preboot
And then make sure ethernet and all disks are plugged in as they should. Reboot, interrupt serial console at count down and
printenv printenv bootargs
and go ahead and boot
boot
Post the entire serial console log here.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Edited 1 time(s). Last edit at 04/03/2018 05:27PM by bodhi.
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 03, 2018 05:55PM |
Registered: 6 years ago Posts: 178 |
Hi Bodhi, looks like something wrong in the bootargs, I had to interrupt as it just was looping the same problem:
at least i can get it back to debian if I unplug stuff:)
thanks!
Echowarrior108
# picocom -b 115200 /dev/ttyUSB0
picocom v2.2
port is : /dev/ttyUSB0
flowcontrol : none
baudrate is : 115200
parity is : none
databits are : 8
stopbits are : 1
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv -E
imap is :
omap is :
emap is : crcrlf,delbs,
Type [C-a] [C-h] to see available commands
Terminal ready
�
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Hit any key to stop autoboot: 0
OX820> printenv
bootcmd=run dt_bootcmd_usb
bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi
bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi
bootdelay=10
bootdev=usb
device=0:1
devices=usb ide
disks=0 1 2 3
dt_bootcmd_usb=usb start; run dt_usb_bootcmd; usb stop; reset
dt_bootm=bootm $uimage_addr $uinitrd_addr $dtb_addr
dt_load_dtb=ext4load usb 0:1 $dtb_addr /boot/dts/ox820-pogoplug-pro.dtb
dt_load_initrd=ext4load usb 0:1 $uinitrd_addr /boot/uInitrd
dt_load_uimage=ext4load usb 0:1 $uimage_addr /boot/uImage
dt_usb_boot=run dt_load_uimage; run dt_load_initrd; run dt_load_dtb; run dt_bootm
dt_usb_bootcmd=run usb_set_bootargs; run dt_usb_boot
dtb_addr=0x62c00000
dtb_file=/boot/dts/ox820-pogoplug-pro.dtb
ethact=dwmac.40400000
ethaddr=00:25:31:01:0C:D5
if_netconsole=ping $serverip
ipaddr=192.168.5.97
load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file
load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd
load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage
mainlineLinux=yes
mtdids=nand0=41000000.nand
mtdparts=mtdparts=41000000.nand:14m(boot),-(data)
nc_ready=0
preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi
scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done
serverip=192.168.5.72
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
stderr=serial
stdin=serial
stdout=serial
uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize
uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done;
uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done;
uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi
uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi
uimage_addr=0x60500000
uinitrd_addr=0x60e00000
usb_custom_params=zswap.enabled=1
usb_ready_retry=15
usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10
Environment size: 3288/131068 bytes
OX820> printenv bootargs
## Error: "bootargs" not defined
OX820> boot
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
scanning usb for storage devices... EHCI timed out on TD - token=0x800d8d80
EHCI timed out on TD - token=0x80008d80
3 Storage Device(s) found
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
resetting ...
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
scanning usb for storage devices... EHCI timed out on TD - token=0x800d8d80
EHCI timed out on TD - token=0x80008d80
3 Storage Device(s) found
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
resetting ...
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Hit any key to stop autoboot: 0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
scanning usb for storage devices... EHCI timed out on TD - token=0x800d8d80
EHCI timed out on TD - token=0x80008d80
3 Storage Device(s) found
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
GPT: first_usable_lba incorrect: 22 > 0
get_partition_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x1A32D7130EC7D52F != 0x5452415020494645
get_partition_info_efi: *** ERROR: Invalid Backup GPT ***
** Invalid partition 1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
resetting ...
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12)
Boot device: NAND
Attempting to set PLLA to 850 MHz ...
plla_ctrl0 : 0000020a
plla_ctrl1 : 00330000
plla_ctrl2 : 0065008b
plla_ctrl3 : 000000f1
PLLA Set
U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700)
OXNAS OX820
DRAM: 128 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: dwmac.40400000
Hit any key to stop autoboot: 0
OX820>
at least i can get it back to debian if I unplug stuff:)
thanks!
Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 03, 2018 07:19PM |
Admin Registered: 13 years ago Posts: 18,550 |
echowarrior108,
> Hi Bodhi, looks like something wrong in the
> bootargs,
That was OK. It will be set correctly later by the env set_bootargs.
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 5 USB Device(s)
> found
> scanning usb for storage devices... EHCI
> timed out on TD - token=0x800d8d80
> EHCI timed out on TD - token=0x80008d80
> 3 Storage Device(s) found
There are 2 other USB drives other than the boot drive. And at least one of them is not good. I'm guessing the FreeAgentDesktop. What is the other USB drive?
----
Yes, reboot with ethernet, but without those extra USB drives. And after booted into Debian, plug them in.
And then look at the drive and partition.
You might want to reformat them in Linux, especiialy the FreeAgentDesktop. If NTFS is needed, ntfs-3g should allow the disk to be plugged in and accessed in Windows. If NTFS is not needed, then use EXT4, and export it as Samba share.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> Hi Bodhi, looks like something wrong in the
> bootargs,
That was OK. It will be set correctly later by the env set_bootargs.
> starting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... 5 USB Device(s)
> found
> scanning usb for storage devices... EHCI
> timed out on TD - token=0x800d8d80
> EHCI timed out on TD - token=0x80008d80
> 3 Storage Device(s) found
There are 2 other USB drives other than the boot drive. And at least one of them is not good. I'm guessing the FreeAgentDesktop. What is the other USB drive?
----
Yes, reboot with ethernet, but without those extra USB drives. And after booted into Debian, plug them in.
And then look at the drive and partition.
mount df -h fdisk -l lsusb -vvv
You might want to reformat them in Linux, especiialy the FreeAgentDesktop. If NTFS is needed, ntfs-3g should allow the disk to be plugged in and accessed in Windows. If NTFS is not needed, then use EXT4, and export it as Samba share.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 03, 2018 10:26PM |
Registered: 6 years ago Posts: 178 |
Hi Bodhi,
the free agent i can format but will do it on ubuntu as it hangs everytime I plug it in, the other is a seagate 5tb drive its much newer and I cannot format it as I have no drive big enough to store that much data at this time. I will let you know how it goes tomorrow sometime, Thanks!!!! Echowarrior108
the free agent i can format but will do it on ubuntu as it hangs everytime I plug it in, the other is a seagate 5tb drive its much newer and I cannot format it as I have no drive big enough to store that much data at this time. I will let you know how it goes tomorrow sometime, Thanks!!!! Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 04, 2018 12:44AM |
Admin Registered: 13 years ago Posts: 18,550 |
echowarrior108,
> other is a seagate 5tb drive its much newer and I
> cannot format it as I have no drive big enough to
> store that much data at this time.
That probably explained the error! This looks like a hybrid GBT/MBR paritition structure is used currently.
With the new u-boot, this 5TB can be formatted a whole single GPT partition, and then it should work in all OS.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> other is a seagate 5tb drive its much newer and I
> cannot format it as I have no drive big enough to
> store that much data at this time.
That probably explained the error! This looks like a hybrid GBT/MBR paritition structure is used currently.
With the new u-boot, this 5TB can be formatted a whole single GPT partition, and then it should work in all OS.
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 04, 2018 02:31AM |
Registered: 6 years ago Posts: 178 |
Bodhi. I believe you are correct, I will need to purchase another large drive to copy files. I have way too much on this to break it up into other drives, I see the trouble as well, it has a small partition that is for seagate tools and my pogoplug wants to read it but can't so it kinda just hangs on reboot.
This also explains why my WRT32x router which has usb ports cannot read it. Thanks for helping me track down this ghost in the machine!!! Echowarrior108
This also explains why my WRT32x router which has usb ports cannot read it. Thanks for helping me track down this ghost in the machine!!! Echowarrior108
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 06, 2018 02:13PM |
Registered: 6 years ago Posts: 178 |
Hi, bodhi, I received my new usb 5tb drive today, I am going to format it on the pogoplug then copy the other 5tb drive, then when done format the old one to the pogoplug , ntfs seems to work ok with my setup so i will proceed with those drives in that manner.
also my new question,its about the pcie , I am never going to use the wifi card , so I came up with a crazy idea and hope I can make it work, I found a pcie card with 2 micro usb ports , my plan it so install it and put in 2 16 gb sandisk cards and use one as rootfs and the other as linux swap, do you think that this is doable?
I will of course keep my working usb rootfs handy:)
thanks EW
also my new question,its about the pcie , I am never going to use the wifi card , so I came up with a crazy idea and hope I can make it work, I found a pcie card with 2 micro usb ports , my plan it so install it and put in 2 16 gb sandisk cards and use one as rootfs and the other as linux swap, do you think that this is doable?
I will of course keep my working usb rootfs handy:)
thanks EW
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 06, 2018 04:55PM |
Admin Registered: 13 years ago Posts: 18,550 |
echowarrior108,
> also my new question,its about the pcie , I am
> never going to use the wifi card , so I came up
> with a crazy idea and hope I can make it work, I
> found a pcie card with 2 micro usb ports , my plan
> it so install it and put in 2 16 gb sandisk cards
> and use one as rootfs and the other as linux swap,
> do you think that this is doable?
Yes, it would work if the USB interface is 2.0.
USB 3.0 is not working in the mPCIe slot, yet (lack of driver for this box).
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
> also my new question,its about the pcie , I am
> never going to use the wifi card , so I came up
> with a crazy idea and hope I can make it work, I
> found a pcie card with 2 micro usb ports , my plan
> it so install it and put in 2 16 gb sandisk cards
> and use one as rootfs and the other as linux swap,
> do you think that this is doable?
Yes, it would work if the USB interface is 2.0.
USB 3.0 is not working in the mPCIe slot, yet (lack of driver for this box).
-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
|
Re: Pogoplug V3 (OXNAS OX820) Questions April 06, 2018 06:22PM |
Registered: 6 years ago Posts: 178 |
