Bennytheben
Issue booting after uboot update April 14, 2018 10:48AM |
root@stora:~# dmesg | grep -i 'bad' [ 8.151723] Scanning device for bad blocks [ 8.204418] Bad eraseblock 448 at 0x000003800000 [ 8.215826] Bad eraseblock 511 at 0x000003fe0000 [ 8.269987] Bad eraseblock 969 at 0x000007920000 [ 8.283464] Bad eraseblock 1051 at 0x000008360000 [ 8.295284] Bad eraseblock 1117 at 0x000008ba0000 [ 8.342523] Bad eraseblock 1510 at 0x00000bcc0000 [ 8.398180] Bad eraseblock 1979 at 0x00000f760000You say blocks 0 - 7 are the ones to watch out for. I'm not sure if you're referring to the first number (in decimal) or the hex number (which I don't know how to read), but I assumed you meant the decimal number and went ahead to the next step. Maybe you could make the instructions slightly clearer for people who are newbies to this area like me?
root@stora:~# flash_erase /dev/mtd0 0 4 Erasing 128 Kibyte @ 465f5c00000064 -- 4 % complete root@stora:~#
root@stora:/tmp# /usr/sbin/flash_erase /dev/mtd0 0xc0000 1 Erasing 128 Kibyte @ 47af5c00000064 -- 7 % complete...but I completed all of the steps and rebooted and uboot has been upgraded successfully!
[ 10.342612] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 10.350137] Please append a correct "root=" boot option; here are the available partitions: [ 10.358656] 1f00 1024 mtdblock0 [ 10.358662] (driver?) [ 10.365300] 1f01 6144 mtdblock1 [ 10.365305] (driver?) [ 10.371921] 1f02 254976 mtdblock2 [ 10.371926] (driver?) [ 10.378498] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params
$ blkid /dev/sdb1: LABEL="rootfs" UUID="4be089b4-752a-4ea9-b021-b1d88fff3857" SEC_TYPE="ext2" TYPE="ext3" PARTUUID="96dd54ae-01"
Bennytheben
Re: Issue booting after uboot update April 14, 2018 10:52AM |
Netgear Stora> printenv arcNumber=2743 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=3 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000.dtb ethact=egiga0 ethaddr=52:3b:20:9c:11:51 if_netconsole=ping $serverip ipaddr=192.168.1.253 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/kirkwood-netgear_stora_ms2000.dtb load_dtb_addr=0x1c00000 load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=ext2load usb 0:1 0x800000 /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi usb_ready_retry=15 Environment size: 2909/131068 bytes
Re: Issue booting after uboot update April 14, 2018 05:52PM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
4. Be sure there is no bad block in the first 1M of your NAND (check dmesg). This is very important, if there is bad block in the first 1M (8 blocks), don't flash u-boot, because you will almost certainly brick your box. Please post your question here (there is a work around for it).
Example of bad block in mtd0:
dmesg | grep -i 'bad'
[ 2.413231] Scanning device for bad blocks
[ 2.417731] Bad eraseblock 3 at 0x000000060000
This bad block is the 4th block which resides within mtd0 (block 0 to block 7). So u-boot should not be flashed.
> root@stora:~# flash_erase /dev/mtd0 0 4 > Erasing 128 Kibyte @ 465f5c00000064 -- 4 % > complete > root@stora:~# >>
> root@stora:/tmp# /usr/sbin/flash_erase /dev/mtd0 > 0xc0000 1 > Erasing 128 Kibyte @ 47af5c00000064 -- 7 % > complete >> ...but I completed all of the steps and rebooted
Quote
8. Flashing default u-boot envs image (if you are upgrading from 2016.05-tld-1 u-boot, you can skip this step 8).
As described in step 1, u-boot envs must be defined in /etc/fw_env.config as
# MTD device name Device offset Env. size Flash sector size Number of sectors
/dev/mtd0 0xc0000 0x20000 0x20000
This default envs image supports booting with multiple disk drives (and hubs) attached. The disk drives could be any type (usb, sata, sd card). The scanning logic and default envs were set to automatically boot the box with the following required configuration:
For whatever reason, if you can't set up your configuration to satisfy the following 4 requirements, then don't flash this defaut envs image. It might not boot properly. In this case, section C below can be used to tailor the envs to your specific configuration.
r1. There must be only one partition among all partitions from all drives that contains the kernel files. The 2 kernel files are /boot/uImage and /boot/uInitrd.
r2. The partition that contains the 2 kernel files must be partition 1 in a disk drive
r3. The partition that contains the rootfs must be labeled rootfs
r4. The rootfs partition is recommended to be type Ext3 (this is not a hard requirement, ext4 should boot OK, but Ext3 will ensure no problem).
So the bottom line is if you have only one rootfs in a single Ext3 partition, which is labeled as rootfs, then you're all set.
Re: Issue booting after uboot update April 15, 2018 04:52AM |
Registered: 6 years ago Posts: 11 |
ben@xameroth:~$ cat /media/ben/rootfs/etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000
Quote
r1. There must be only one partition among all partitions from all drives that contains the kernel files. The 2 kernel files are /boot/uImage and /boot/uInitrd.
Re: Issue booting after uboot update April 15, 2018 05:44PM |
Admin Registered: 13 years ago Posts: 18,570 |
printenv boot
Re: Issue booting after uboot update April 16, 2018 03:32AM |
Registered: 6 years ago Posts: 11 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:38:05 -0700) Netgear Stora MS2110 SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 3 0 Netgear Stora> printenv arcNumber=2743 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=3 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-netgear_stora_ms2000.dtb ethact=egiga0 ethaddr=52:3b:20:9c:11:51 if_netconsole=ping $serverip ipaddr=192.168.1.253 led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=ext2load usb 0:1 0x1c00000 /boot/dts/kirkwood-netgear_stora_ms2000.dtb load_dtb_addr=0x1c00000 load_initrd=ext2load usb 0:1 0x1100000 /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=ext2load usb 0:1 0x800000 /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) partition=nand0,2 preboot_nc=run if_netconsole start_netconsole scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_boot=run load_dtb; run load_uimage; if run load_initrd; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 - 0x1c00000; fi usb_ready_retry=15 Environment size: 2909/131068 bytes Netgear Stora> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found Reset IDE: Bus 0: OK Bus 1: OK Device 0: Model: ST2000DM001-1ER164 Firm: CC26 Ser#: Z4Z47BDE Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) Device 1: Model: ST2000DM001-9YN164 Firm: CC4H Ser#: Z1E16PM5 Type: Hard Disk Supports 48-bit addressing Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) Unknown command 'mmc' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part[4CStart Sector[4CNum Sectors[5CUUID[4C[8CType 1[5C32 [6C30031218 [6C96dd54ae-01[5C83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** Partition Map for IDE device 0 -- Partition Type: DOS Part[4CStart Sector[4CNum Sectors[5CUUID[4C[8CType 1[5C1 [6C3906250000[6C00091b90-01[5Cfd Partition Map for IDE device 1 -- Partition Type: DOS Part[4CStart Sector[4CNum Sectors[5CUUID[4C[8CType 1[5C1 [6C3906250000[6C00075d10-01[5Cfd Unknown command 'mmc' - try 'help' running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 692 ms (0 Bytes/s) Found bootable drive on usb 0 3937909 bytes read in 911 ms (4.1 MiB/s) 7861543 bytes read in 933 ms (8 MiB/s) 11869 bytes read in 2614 ms (3.9 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.15.2-kirkwood-tld-1 Created: 2018-04-14 12:53:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3937845 Bytes = 3.8 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.15.2-kirkwood-tld-1 Created: 2018-04-14 12:53:16 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7861479 Bytes = 7.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 03880000, end 03fff4e7 ... OK Loading Device Tree to 0387a000, end 0387fe5c ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.15.2-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 PREEMPT Fri Feb 9 01:52:00 PST 2018 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: NETGEAR MS2000 / MS2110 aka Stora [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 116500K/131072K available (8192K kernel code, 750K rwdata, 2068K rodata, 1024K init, 282K bss, 14572K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (9184 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 751 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 283 kB) [ 0.000000] random: get_random_u32 called from cache_alloc_refill+0x368/0x8cc with crng_init=0 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000012] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.007907] Switching to timer-based delay loop, resolution 5ns [ 0.014470] Console: colour dummy device 80x30 [ 0.019027] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.029662] pid_max: default: 32768 minimum: 301 [ 0.034490] Security Framework initialized [ 0.038834] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.045500] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.053797] CPU: Testing write buffer coherency: ok [ 0.060007] Setting up static identity map for 0x100000 - 0x100058 [ 0.066539] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.072075] Hierarchical SRCU implementation. [ 0.080451] devtmpfs: initialized [ 0.089580] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.099578] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.106176] prandom: seed boundary self test passed [ 0.116174] prandom: 100 self tests passed [ 0.120341] pinctrl core: initialized pinctrl subsystem [ 0.126938] NET: Registered protocol family 16 [ 0.131974] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.139648] audit: initializing netlink subsys (disabled) [ 0.146320] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1 [ 0.154264] cpuidle: using governor ladder [ 0.154330] cpuidle: using governor menu [ 0.154839] Feroceon L2: Enabling L2 [ 0.154880] Feroceon L2: Cache support initialised. [ 0.155318] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.161289] No ATAGs? [ 0.198085] vgaarb: loaded [ 0.198461] SCSI subsystem initialized [ 0.198940] usbcore: registered new interface driver usbfs [ 0.199001] usbcore: registered new interface driver hub [ 0.199087] usbcore: registered new device driver usb [ 0.200207] clocksource: Switched to clocksource orion_clocksource [ 0.342602] VFS: Disk quotas dquot_6.6.0 [ 0.346630] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.364427] NET: Registered protocol family 2 [ 0.369683] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.376751] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.383171] TCP: Hash tables configured (established 1024 bind 1024) [ 0.389646] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.395553] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.402105] NET: Registered protocol family 1 [ 0.406981] RPC: Registered named UNIX socket transport module. [ 0.413022] RPC: Registered udp transport module. [ 0.417751] RPC: Registered tcp transport module. [ 0.422517] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.429377] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.437081] Initialise system trusted keyrings [ 0.441692] Key type blacklist registered [ 0.445901] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.452551] zbud: loaded [ 0.456141] NFS: Registering the id_resolver key type [ 0.461320] Key type id_resolver registered [ 0.465519] Key type id_legacy registered [ 0.469562] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.476380] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.483111] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.490456] fuse init (API version 7.26) [ 0.494805] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.501524] orangefs_init: module version upstream loaded [ 0.506948] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.280214] random: fast init done [ 7.657568] Key type asymmetric registered [ 7.662024] Asymmetric key parser 'x509' registered [ 7.666990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 7.674587] io scheduler noop registered [ 7.678530] io scheduler deadline registered [ 7.682993] io scheduler cfq registered (default) [ 7.689198] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 7.699044] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 7.707705] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 7.714036] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 7.720973] pci_bus 0000:00: root bus resource [bus 00-ff] [ 7.726862] PCI: bus0: Fast back to back transfers disabled [ 7.732516] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.740749] PCI: bus1: Fast back to back transfers enabled [ 7.746317] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.752035] mv_xor f1060800.xor: Marvell shared XOR driver [ 7.821168] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 7.828772] mv_xor f1060900.xor: Marvell shared XOR driver [ 7.891163] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 7.898995] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 7.906880] console [ttyS0] disabled [ 7.910618] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 7.919666] console [ttyS0] enabled [ 7.919666] console [ttyS0] enabled [ 7.926728] bootconsole [earlycon0] disabled [ 7.926728] bootconsole [earlycon0] disabled [ 7.942960] loop: module loaded [ 7.946760] sata_mv f1080000.sata: slots 32 ports 2 [ 7.954816] scsi host0: sata_mv [ 7.958445] scsi host1: sata_mv [ 7.961888] ata1: SATA max UDMA/133 irq 33 [ 7.966005] ata2: SATA max UDMA/133 irq 33 [ 7.971051] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda [ 7.977541] nand: Samsung NAND 256MiB 3,3V 8-bit [ 7.982217] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.989836] Scanning device for bad blocks [ 8.042557] Bad eraseblock 448 at 0x000003800000 [ 8.053966] Bad eraseblock 511 at 0x000003fe0000 [ 8.108247] Bad eraseblock 969 at 0x000007920000 [ 8.121747] Bad eraseblock 1051 at 0x000008360000 [ 8.133586] Bad eraseblock 1117 at 0x000008ba0000 [ 8.180814] Bad eraseblock 1510 at 0x00000bcc0000 [ 8.236449] Bad eraseblock 1979 at 0x00000f760000 [ 8.248616] 3 ofpart partitions found on MTD device orion_nand [ 8.254531] Creating 3 MTD partitions on "orion_nand": [ 8.259726] 0x000000000000-0x000000100000 : "u-boot" [ 8.265869] 0x000000100000-0x000000700000 : "uImage" [ 8.272044] 0x000000700000-0x000010000000 : "root" [ 8.281285] libphy: Fixed MDIO Bus: probed [ 8.286326] libphy: orion_mdio_bus: probed [ 8.290542] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@8: Whitelisted compatible string. Please remove [ 8.302465] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 8.470263] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 8.481146] ata1.00: ATA-9: ST2000DM001-1ER164, CC26, max UDMA/133 [ 8.487368] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.527039] ata1.00: configured for UDMA/133 [ 8.550806] scsi 0:0:0:0: Direct-Access ATA ST2000DM001-1ER1 CC26 PQ: 0 ANSI: 5 [ 8.571286] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 8.579076] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 8.600345] sd 0:0:0:0: [sda] Write Protect is off [ 8.605315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.647115] sda: sda1 [ 8.661068] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.080254] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 9.091124] ata2.00: ATA-8: ST2000DM001-9YN164, CC4H, max UDMA/133 [ 9.097340] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 9.134794] ata2.00: configured for UDMA/133 [ 9.140932] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 52:3b:20:9c:11:51 [ 9.150152] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-9YN1 CC4H PQ: 0 ANSI: 5 [ 9.151346] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 9.151357] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 9.151446] sd 1:0:0:0: [sdb] Write Protect is off [ 9.151613] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.179768] sdb: sdb1 [ 9.181397] sd 1:0:0:0: [sdb] Attached SCSI disk [ 9.197747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.204383] ehci-pci: EHCI PCI platform driver [ 9.208907] ehci-orion: EHCI orion driver [ 9.213222] orion-ehci f1050000.ehci: EHCI Host Controller [ 9.218763] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 9.226703] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 9.260249] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 9.266593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 9.273455] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.280734] usb usb1: Product: EHCI Host Controller [ 9.285638] usb usb1: Manufacturer: Linux 4.15.2-kirkwood-tld-1 ehci_hcd [ 9.292392] usb usb1: SerialNumber: f1050000.ehci [ 9.297799] hub 1-0:1.0: USB hub found [ 9.301684] hub 1-0:1.0: 1 port detected [ 9.306396] usbcore: registered new interface driver usb-storage [ 9.312867] mousedev: PS/2 mouse device common for all mice [ 9.670248] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 9.871459] usb 1-1: New USB device found, idVendor=0781, idProduct=5583 [ 9.878214] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.885413] usb 1-1: Product: Ultra Fit [ 9.889289] usb 1-1: Manufacturer: SanDisk [ 9.893428] usb 1-1: SerialNumber: 4C530001310407119045 [ 9.899544] usb-storage 1-1:1.0: USB Mass Storage device detected [ 9.906141] scsi host2: usb-storage 1-1:1.0 [ 10.330251] rtc-mv f1010300.rtc: internal RTC not ticking [ 10.335870] i2c /dev entries driver [ 10.346360] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 10.356342] hidraw: raw HID events driver (C) Jiri Kosina [ 10.362218] drop_monitor: Initializing network drop monitor service [ 10.368848] NET: Registered protocol family 17 [ 10.373456] Key type dns_resolver registered [ 10.378538] registered taskstats version 1 [ 10.382693] Loading compiled-in X.509 certificates [ 10.387581] zswap: loaded using pool lzo/zbud [ 10.399486] Key type big_key registered [ 10.405714] Key type encrypted registered [ 10.412791] rtc-pcf8563 0-0051: setting system clock to 2018-04-16 08:27:56 UTC (1523867276) [ 10.422583] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 10.430108] Please append a correct "root=" boot option; here are the available partitions: [ 10.438626] 1f00 1024 mtdblock0 [ 10.438632] (driver?) [ 10.445272] 1f01 6144 mtdblock1 [ 10.445277] (driver?) [ 10.451892] 1f02 254976 mtdblock2 [ 10.451897] (driver?) [ 10.458471] 0800 1953514584 sda [ 10.458476] driver: sd [ 10.464637] 0801 1953125000 sda1 00091b90-01 [ 10.464641] [ 10.471060] 0810 1953514584 sdb [ 10.471065] driver: sd [ 10.477200] 0811 1953125000 sdb1 00075d10-01 [ 10.477204] [ 10.483628] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 10.491938] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.2-kirkwood-tld-1 #1 [ 10.499014] Hardware name: Marvell Kirkwood (Flattened Device Tree) [ 10.505349] [<c010ee44>] (unwind_backtrace) from [<c010af14>] (show_stack+0x10/0x14) [ 10.513143] [<c010af14>] (show_stack) from [<c0118744>] (panic+0xb0/0x244) [ 10.520068] [<c0118744>] (panic) from [<c0c011ec>] (mount_block_root+0x1a4/0x278) [ 10.527594] [<c0c011ec>] (mount_block_root) from [<c0c01388>] (m
Re: Issue booting after uboot update April 16, 2018 03:55AM |
Admin Registered: 13 years ago Posts: 18,570 |
Quote
4. Create uImage and uInitrd and setup for booting.
I'm using the GoFlex Net booting with USB drive as an example here. Please replace its name (kirkwood-goflexnet.dtb) with the box you are installing on (for example, kirkwood-pogo_e02.dtb). Please look inside /boot/dts/ for the correct DTB file name for your box.
Below are the 2 different alternatives in booting (method 4b is required for booting with older U-Boot that does not support FDT).
- Choose option 4a if you are going to use the current rootfs for many different Kirkwood boxes, as is. It should boot most of the Kirkwood boxes. And with the latest U-Boot for Kirkwood that suports FDT. This is the preferred method.
- Choose option 4b if you only use the current rootfs for the box you're installing on, and don't want to modify u-boot envs. This method is required for booting with older U-Boot that does not support FDT. Note that if you are installing from stock OS, u-boot envs must be modified to boot with USB or HDD (please post questions, since each box has a different flavor in setting up the envs).
4a. Boot with DTB file (standard way to boot FDT kernel). Recommended.
......
4b. Boot with DTB file embedded in the kernel image (no U-Boot envs changes are needed if your system already booting on USB or HDD)
.....
cd /boot cp -a uImage uImage.stora_dtb_embedded mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.15.2-kirkwood-tld-1 -d vmlinuz-4.15.2-kirkwood-tld-1 uImage sync
Re: Issue booting after uboot update April 16, 2018 01:54PM |
Registered: 6 years ago Posts: 11 |
Re: Issue booting after uboot update April 16, 2018 05:31PM |
Admin Registered: 13 years ago Posts: 18,570 |
linux-image-4.16.1-kirkwood-tld-1_1.0_armel.deb linux-headers-4.16.1-kirkwood-tld-1_1.0_armel.deb config-4.16.1-kirkwood-tld-1 zImage-4.16.1-kirkwood-tld-1 linux-dtb-4.16.1-kirkwood-tld-1.tar linux-4.16.1-kirkwood-tld-1.patch