NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 04, 2019 05:08PM |
Registered: 5 years ago Posts: 7 |
$ telnet 192.168.87.253 nsa310 login: root Password: BusyBox v1.17.2 (2016-03-11 17:11:16 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # mount rootfs on / type rootfs (rw) /proc on /proc type proc (rw,relatime) /sys on /sys type sysfs (rw,relatime) none on /proc/bus/usb type usbfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,mode=600) /dev/mtdblock6 on /zyxel/mnt/nand type yaffs2 (ro,relatime) /dev/sda1 on /zyxel/mnt/sysdisk type ext2 (ro,relatime,errors=continue) /dev/loop0 on /ram_bin type ext2 (ro,relatime,errors=continue) /dev/loop0 on /usr type ext2 (ro,relatime,errors=continue) /dev/loop0 on /lib/security type ext2 (ro,relatime,errors=continue) /dev/loop0 on /lib/modules type ext2 (ro,relatime,errors=continue) /dev/ram0 on /tmp/tmpfs type tmpfs (rw,relatime,size=5120k) /dev/ram0 on /usr/local/etc type tmpfs (rw,relatime,size=5120k) /dev/ram0 on /usr/local/var type tmpfs (rw,relatime,size=5120k) /dev/mtdblock4 on /etc/zyxel type yaffs2 (rw,relatime) /dev/md0 on /i-data/ea498e69 type ext4 (rw,noatime,barrier=0,data=writeback,usrquota) /dev/md0 on /usr/local/zy-pkgs type ext4 (rw,noatime,barrier=0,data=writeback,usrquota) /dev/md0 on /etc/zyxel/zy-pkgs type ext4 (rw,noatime,barrier=0,data=writeback,usrquota) /dev/md0 on /usr/local/apache/htdocs/adv,/pkg type ext4 (rw,noatime,barrier=0,data=writeback,usrquota) nfsd on /proc/fs/nfsd type nfsd (rw,relatime) /dev/md0 on /usr/local/apache/web_framework/data/cache type ext4 (rw,noatime,barrier=0,data=writeback,usrquota) /dev/mtdblock4 on /usr/local/apache/web_framework/data/config type yaffs2 (rw,relatime) ~ # cat /etc/fstab /dev/ram0 / ext2 defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 none /dev/pts devpts defaults 0 0 ~ # cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1199.30 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000 ~ # cat /proc/meminfo MemTotal: 247952 kB MemFree: 7704 kB Buffers: 23540 kB Cached: 166952 kB SwapCached: 0 kB Active: 49508 kB Inactive: 157528 kB Active(anon): 6928 kB Inactive(anon): 26376 kB Active(file): 42580 kB Inactive(file): 131152 kB Unevictable: 14812 kB Mlocked: 0 kB SwapTotal: 524280 kB SwapFree: 524280 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 31388 kB Mapped: 12796 kB Slab: 13796 kB SReclaimable: 2984 kB SUnreclaim: 10812 kB PageTables: 1004 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 648256 kB Committed_AS: 315308 kB VmallocTotal: 385024 kB VmallocUsed: 608 kB VmallocChunk: 382828 kB ~ # dmesg Linux version 2.6.31.8 (root@BuildMachine) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #2 Fri Mar 11 17:35:20 CST 2016 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c0849988, node_mem_map c0868000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65024 pages, LIFO batch:15 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024 Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) root=/dev/nfs rw init=/init PID hash table entries: 1024 (order: 10, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB = 256MB total Memory: 244992KB available (5304K code, 300K data, 2804K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 1199.30 BogoMIPS (lpj=5996544) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 256MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PEX1_MEM ....no such PEX1_IO ....no such INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.1.3_patch18)-- RD-88F6281A Soc: 88F6281 A1 LE Detected Tclk 200000000 and SysClk 400000000 Marvell USB EHCI Host controller #0: c8040740 PEX0 interface detected Link X1 pci 0000:00:01.0: reg 10 io port: [0xf0000000-0xf00000ff] pci 0000:00:01.0: reg 18 64bit mmio: [0x40000000-0x40000fff] pci 0000:00:01.0: reg 20 64bit mmio: [0x40004000-0x40007fff] pci 0000:00:01.0: reg 30 32bit mmio: [0x000000-0x00ffff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:01.0: PME# disabled PCI: bus0: Fast back to back transfers disabled mvPexLocalBusNumSet: ERR. Invalid PEX interface 1 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 rtc mv_rtc: rtc core: registered kw-rtc as rtc0 RTC registered cpufreq: Init kirkwood cpufreq driver cpufreq: High frequency: 1200000KHz - Low frequency: 400000KHz cpufreq: Setting CPU Frequency to 1200000 KHz cpufreq: Setting PowerSaveState to off XOR registered 4 channels XOR 2nd invalidate WA enabled mvCesaInit: sessions=640, queue=64, pSram=f0000000 Warning: TS unit is powered off. gpio_dev = fd00000 LED_SET_CTL_IOC_NUM= 6702 High gpio polarity = 50 High gpio polarity = 70 Enable Interrupt mv88f6281_wdt: Watchdog Timer timeout = 8 sec. mv88f6281_wdt: HW Watchdog timeout = 15 sec. VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.12) SGI XFS with security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem yaffs built Mar 11 2016 17:19:52 Installing. YAFFS-WARNING CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED selected. msgmni has been set to 478 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled brd: module loaded loop: module loaded Integrated Sata device found IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs Wake up disk0...... Wake up disk1...... scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi 0:0:0:0: Direct-Access WD5000AVDS-63U7B 01.0 PQ: 0 ANSI: 5 EnablePowerSaving PowerSavingTime = 15 sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] 0-byte physical blocks sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 0 Giga ports supported o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload (TSO) supported o Large Receive offload (LRO) supported o Receive checksum offload supported o Transmit checksum offload supported o Network Fast Processing (Routing) supported - (Disabled) o Driver ERROR statistics enabled o Proc tool API enabled o SKB Reuse supported - (Disabled) o SKB Recycle supported - (Disabled) o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): mvFpRuleDb (c8f5a000): 2048 entries, 8192 bytes Counter=0, opIdx=6, overhead=16 Counter=1, opIdx=2, overhead=0 Counter=2, opIdx=1, overhead=18 Counter=3, opIdx=2, overhead=0 NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 962 at 0x000007840000 9 cmdlinepart partitions found on MTD device nand_mtd Using command line partition definition Creating 9 MTD partitions on "nand_mtd": 0x000000000000-0x000000100000 : "uboot" sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. 0x000000100000-0x000000180000 : "uboot_env" 0x000000180000-0x000000200000 : "key_store" 0x000000200000-0x000000280000 : "info" sda: 0x000000280000-0x000000480000 : "etc" 0x000000480000-0x000000a80000 : "kernel_1" 0x000000a80000-0x000004240000 : "rootfs1" 0x000004240000-0x000004840000 : "kernel_2" sda1 sda2 0x000004840000-0x000008000000 : "rootfs2" sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 sd 0:0:0:0: [sda] Attached SCSI disk ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat mice: PS/2 mouse device common for all mice i2c /dev entries driver hwmon-vid: Unknown VRM version of your CPU md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 cpufreq: Setting CPU Frequency to 1200000 KHz cpufreq: Setting PowerSaveState to off sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions ip6tnl0: Disabled Privacy Extensions NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc mv_rtc: setting system clock to 2019-02-28 17:10:02 UTC (1551373802) Freeing init memory: 2804K usb 1-1: new high speed USB device using ehci_marvell and address 2 In hub_port_init, and number is 0, retry 0, port 1 ..... usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected r8168 Gigabit Ethernet driver 8.023.00-NAPI loaded r8168 0000:00:01.0: no MSI. Back to INTx. Set LED ... eth%d: RTL8168B/8111B at 0xd0900000, 50:67:f0:52:9e:d9, IRQ 9 r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625. eth0: Identified chip type is 'RTL8168D/8111D'. r8168 Copyright (C) 2011 Realtek NIC software team <nicfae@realtek.com> This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. r8168: egiga0: link down ADDRCONF(NETDEV_UP): egiga0: link is not ready yaffs: dev is 32505862 name is "mtdblock6" ro yaffs: passed flags "" yaffs: Attempting MTD mount of 31.6,"mtdblock6" yaffs_read_super: isCheckpointed 0 r8168: egiga0: link up ADDRCONF(NETDEV_CHANGE): egiga0: link becomes ready r8168: egiga0: link up yaffs: dev is 32505860 name is "mtdblock4" rw yaffs: passed flags "" yaffs: Attempting MTD mount of 31.4,"mtdblock4" yaffs_read_super: isCheckpointed 0 NTFS driver 2.1.29 [Flags: R/O MODULE]. tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' taints kernel. Disabling lock debugging due to kernel taint Tuxera NTFS driver 3011.12.23 [Flags: R/W MODULE]. PPP generic driver version 2.4.2 PPP MPPE Compression module registered PPP Deflate Compression module registered NET: Registered protocol family 24 PPP BSD Compression module registered egiga0: no IPv6 routers present md: md0 stopped. md: bind<sda2> md0: detected capacity change from 0 to 499577782784 md0: unknown partition table EXT4-fs (md0): barriers disabled kjournald2 starting: pid 1588, dev md0:8, commit interval 5 seconds EXT4-fs (md0): warning: checktime reached, running e2fsck is recommended EXT4-fs (md0): internal journal on md0:8 EXT4-fs (md0): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (md0): mounted filesystem with writeback data mode DisablePowerSaving TimerState = 1 EnablePowerSaving PowerSavingTime = 15 Adding 524280k swap on /i-data/.zyxel/swap_ul6545p. Priority:-1 extents:4 across:542712k svc: failed to register lockdv1 RPC service (errno 97). Uncached vma c231c5f8 (addr 40b3c000 flags 080000ff phy 04970000) from pid 5286 Uncached vma c231c548 (addr 40b3f000 flags 080000ff phy 04970000) from pid 5286 Uncached vma c231c548 (addr 406fe000 flags 080000ff phy 04970000) from pid 1367 Uncached vma c231c548 (addr 406fe000 flags 080000ff phy 04970000) from pid 1367 nfsd: peername failed (err 107)! // Step 1. ~ # cat /etc/fw_env.config # Configuration file for fw_(printenv/saveenv) utility. # Up to two entries are valid, in this case the redundand # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR. # MTD device name Device offset Env. size Flash sector size Number of sectors # NAND example /dev/mtd1 0x0000 0x20000 0x20000 4 ~ # cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00080000 00020000 "uboot_env" mtd2: 00080000 00020000 "key_store" mtd3: 00080000 00020000 "info" mtd4: 00200000 00020000 "etc" mtd5: 00600000 00020000 "kernel_1" mtd6: 037c0000 00020000 "rootfs1" mtd7: 00600000 00020000 "kernel_2" mtd8: 037c0000 00020000 "rootfs2" // Step 2. /i-data/ea498e69/nfs/nas/uboot-update/tools # ./fw_printenv bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) root=/dev/nfs rw init=/init bootcmd=nand read.e 0x2000000 $(kernel_addr) 0x600000; bootm 0x2000000 bootdelay=2 baudrate=115200 loads_echo=0 eth1addr=00:19:CB:00:51:82 ipaddr=10.4.50.165 serverip=10.4.50.5 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 nandEcc=1bit kernel_addr=480000 PRODUCT_NAME=NSA-310 FEATURE_BIT=00 CONTRY_TYPE=FF VENDOR_NAME=ZyXEL Communications Corp. run_diag=yes ethaddr=50:67:F0:52:9E:D9 MODEL_ID=A203 // Step 3. /i-data/ea498e69/nfs/nas/uboot-update/tools # ./nanddump --noecc --omitoob -l 0x80000 -f mtd0 /dev/mtd0 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... /i-data/ea498e69/nfs/nas/uboot-update/tools # md5sum mtd0 428d03817291278c9cec6468af72f4ff mtd0 /i-data/ea498e69/nfs/nas/uboot-update/dump # # ../tools/nanddump --noecc --omitoob -f mtd2 /dev/mtd2 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd3 /dev/mtd3 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd4 /dev/mtd4 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00200000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd5 /dev/mtd5 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00600000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd6 /dev/mtd6 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x037c0000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd7 /dev/mtd7 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00600000... /i-data/ea498e69/nfs/nas/uboot-update/dump # ../tools/nanddump --noecc --omitoob -f mtd8 /dev/mtd8 Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x037c0000... // Step 4. /tmp # dmesg | grep mtd Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) root=/dev/nfs rw init=/init 9 cmdlinepart partitions found on MTD device nand_mtd Creating 9 MTD partitions on "nand_mtd": yaffs: dev is 32505862 name is "mtdblock6" ro yaffs: Attempting MTD mount of 31.6,"mtdblock6" yaffs: dev is 32505860 name is "mtdblock4" rw yaffs: Attempting MTD mount of 31.4,"mtdblock4" // Step 5./6. /tmp # ./flash_erase /dev/mtd0 0 4 Erasing 128 Kibyte @ 60000 -- 100 % complete /tmp # nandwrite /dev/mtd0 uboot.2017.07-tld-1.nsa310.mtd0.kwb Writing data to block 0 Writing data to block 20000 Writing data to block 40000 Writing data to block 60000 /tmp # fw_printenv Warning: Bad CRC, using default environment bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000 bootdelay=2 baudrate=115200 nandEcc=1bit kernel_addr=480000 MODEL_ID=A203 PRODUCT_NAME=NSA-310 FEATURE_BIT=00 CONTRY_TYPE=FF VENDOR_NAME=ZyXEL Communications Corp. // Step 8. // The guide says 'As described in step 1, u-boot envs must be defined in /etc/fw_env.config as' ..., so I updated /etc/fw_env.config to that: /tmp # cat /etc/fw_env.config # MTD device name Device offset Env. size Flash sector size Number of sectors /dev/mtd0 0xc0000 0x20000 0x20000 /tmp # ./flash_erase /dev/mtd0 0xc0000 1 Erasing 128 Kibyte @ c0000 -- 100 % complete /tmp # nandwrite -s 786432 /dev/mtd0 uboot.2016.05-tld-1.environment.img Writing data to block c0000 /tmp # fw_setenv arcNumber 4022 /tmp # fw_setenv machid /tmp # fw_setenv ethaddr '50:67:F0:52:9E:D9' /tmp # fw_setenv eth1addr '00:19:CB:00:51:82' /tmp # fw_setenv mtdparts 'nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2)' ~ # fw_setenv dtb_file '/boot/dts/kirkwood-nsa310.dtb' /tmp # fw_setenv preboot_nc 'setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole ; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi' /tmp # fw_setenv preboot 'run preboot_nc' /tmp # fw_setenv ipaddr '192.168.11.253' /tmp # fw_setenv serverip '192.168.11.200' ~ # fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $loa d_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 ethact=egiga0 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking load_dtb_addr=0x1c00000 load_initrd_addr=0x1100000 load_uimage_addr=0x800000 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage mainlineLinux=yes mtdids=nand0=orion_nand partition=nand0,2 scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $di sknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi usb_ready_retry=15 arcNumber=4022 ethaddr=50:67:F0:52:9E:D9 eth1addr=00:19:CB:00:51:82 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(r ootfs2) preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_ne tconsole; fi preboot=run preboot_nc ipaddr=192.168.11.253 serverip=192.168.11.200 dtb_file=/boot/dts/kirkwood-nsa310.dtb ~ # reboot
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 04, 2019 06:21PM |
Admin Registered: 13 years ago Posts: 18,560 |
preboot=run preboot_nc ipaddr=192.168.11.253 serverip=192.168.11.200
nc -lup 6666 192.168.11.253 6666
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 05, 2019 11:48AM |
Registered: 5 years ago Posts: 7 |
# fdisk -l /dev/sda Disk /dev/sda: 1.9 GiB, 1967128576 bytes, 3842048 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xb51b2625 Device Boot Start End Sectors Size Id Type /dev/sda1 8 3842047 3842040 1.9G c W95 FAT32 (LBA) # mkfs.ext3 -L rootfs /dev/sda1 mke2fs 1.44.1 (24-Mar-2018) Creating filesystem with 480255 4k blocks and 120240 inodes Filesystem UUID: 1a1e334b-1b17-484d-81b5-88ab6446d56b Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912 Allocating group tables: done Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done # mount /dev/sda1 /mnt/usb # cd /mnt/usb # tar -xjf /path/to/Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2 # ls -la /mnt/usb total 96 drwxr-xr-x 21 root root 4096 Feb 17 2015 . drwxr-xr-x 6 root root 4096 Mar 5 17:58 .. drwxr-xr-x 2 root root 4096 Jul 24 2017 bin drwxr-xr-x 3 root root 4096 Jan 1 1970 boot drwxr-xr-x 5 root root 4096 Feb 24 2012 dev drwxr-xr-x 57 root root 4096 Jan 1 1970 etc drwxr-xr-x 2 root root 4096 Jan 22 2012 home drwxr-xr-x 14 root root 4096 Jul 20 2017 lib drwx------ 2 root root 16384 Feb 24 2012 lost+found drwxr-xr-x 2 root root 4096 Feb 24 2012 media drwxr-xr-x 2 root root 4096 Feb 10 2015 mnt drwxr-xr-x 2 root root 4096 Feb 24 2012 opt drwxr-xr-x 2 root root 4096 Jan 22 2012 proc drwx------ 5 root root 4096 Jul 24 2017 root drwxr-xr-x 2 root root 4096 Feb 8 2013 run drwxr-xr-x 2 root root 4096 Jul 24 2017 sbin drwxr-xr-x 2 root root 4096 Feb 24 2012 srv drwxr-xr-x 2 root root 4096 Jan 1 2011 sys drwxrwxrwt 2 root root 4096 Jan 1 1970 tmp drwxr-xr-x 10 root root 4096 Feb 24 2012 usr drwxr-xr-x 11 root root 4096 Jan 1 1970 var # sync
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 05, 2019 05:01PM |
Admin Registered: 13 years ago Posts: 18,560 |
Quote
Could the original firmware have written something to the flash when I did the graceful reboot? Maybe I should have just pulled the power plug after installing U-boot?
Quote
When I press the power button the following happens with the LEDs:
* A blue one under the power button turns on and stays on.
* A red one underneath some voltage/current symbol turn on, but quickly changes to green.
* A red one underneath what I think is the disk activity symbol, turns on and quickly turns off.
# tar -xjf /path/to/Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 06, 2019 01:26AM |
Registered: 5 years ago Posts: 7 |
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 06, 2019 02:43AM |
Admin Registered: 13 years ago Posts: 18,560 |
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 09, 2019 10:28AM |
Registered: 5 years ago Posts: 7 |
root@debian:~# fw_setenv preboot_nc Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash root@debian:~# uname -a Linux debian 4.12.1-kirkwood-tld-1 #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 armv5tel GNU/Linux root@debian:~# cat /proc/cmdline console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 "uboot" mtd1: 00080000 00020000 "uboot_env" mtd2: 00080000 00020000 "key_store" mtd3: 00080000 00020000 "info" mtd4: 00a00000 00020000 "etc" mtd5: 00a00000 00020000 "kernel_1" mtd6: 02fc0000 00020000 "rootfs1" mtd7: 00a00000 00020000 "kernel_2" mtd8: 02fc0000 00020000 "rootfs2" root@debian:~# dmesg | grep -i mtd [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) [ 7.675968] 9 ofpart partitions found on MTD device orion_nand [ 7.681848] Creating 9 MTD partitions on "orion_nand": root@debian:~# dmesg | grep -i 0x000 [ 6.646732] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 6.646757] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref] [ 6.646776] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 6.647140] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 7.665387] Bad eraseblock 962 at 0x000007840000 [ 7.687037] 0x000000000000-0x000000100000 : "uboot" [ 7.693258] 0x000000100000-0x000000180000 : "uboot_env" [ 7.699866] 0x000000180000-0x000000200000 : "key_store" [ 7.706417] 0x000000200000-0x000000280000 : "info" [ 7.712440] 0x000000280000-0x000000c80000 : "etc" [ 7.718380] 0x000000c80000-0x000001680000 : "kernel_1" [ 7.724740] 0x000001680000-0x000004640000 : "rootfs1" [ 7.731377] 0x000004640000-0x000005040000 : "kernel_2" [ 7.737867] 0x000005040000-0x000008000000 : "rootfs2" root@debian:~# ls -l /dev/mtd* crw------- 1 root root 90, 0 Mar 9 06:49 /dev/mtd0 crw------- 1 root root 90, 1 Mar 9 06:49 /dev/mtd0ro crw------- 1 root root 90, 2 Mar 9 06:49 /dev/mtd1 crw------- 1 root root 90, 3 Mar 9 06:49 /dev/mtd1ro crw------- 1 root root 90, 4 Mar 9 06:49 /dev/mtd2 crw------- 1 root root 90, 5 Mar 9 06:49 /dev/mtd2ro crw------- 1 root root 90, 6 Mar 9 06:49 /dev/mtd3 crw------- 1 root root 90, 7 Mar 9 06:49 /dev/mtd3ro crw------- 1 root root 90, 8 Mar 9 06:49 /dev/mtd4 crw------- 1 root root 90, 9 Mar 9 06:49 /dev/mtd4ro crw------- 1 root root 90, 10 Mar 9 06:49 /dev/mtd5 crw------- 1 root root 90, 11 Mar 9 06:49 /dev/mtd5ro crw------- 1 root root 90, 12 Mar 9 06:49 /dev/mtd6 crw------- 1 root root 90, 13 Mar 9 06:49 /dev/mtd6ro crw------- 1 root root 90, 14 Mar 9 06:49 /dev/mtd7 crw------- 1 root root 90, 15 Mar 9 06:49 /dev/mtd7ro crw------- 1 root root 90, 16 Mar 9 06:49 /dev/mtd8 crw------- 1 root root 90, 17 Mar 9 06:49 /dev/mtd8ro brw-rw---- 1 root disk 31, 0 Mar 9 06:49 /dev/mtdblock0 brw-rw---- 1 root disk 31, 1 Mar 9 06:49 /dev/mtdblock1 brw-rw---- 1 root disk 31, 2 Mar 9 06:49 /dev/mtdblock2 brw-rw---- 1 root disk 31, 3 Mar 9 06:49 /dev/mtdblock3 brw-rw---- 1 root disk 31, 4 Mar 9 06:49 /dev/mtdblock4 brw-rw---- 1 root disk 31, 5 Mar 9 06:49 /dev/mtdblock5 brw-rw---- 1 root disk 31, 6 Mar 9 06:49 /dev/mtdblock6 brw-rw---- 1 root disk 31, 7 Mar 9 06:49 /dev/mtdblock7 brw-rw---- 1 root disk 31, 8 Mar 9 06:49 /dev/mtdblock8 root@debian:~# fw_printenv arcNumber=4022 bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addr $load_initrd_addr $load_dtb_addr; else bootm $load_uimage_addr $load_initrd_addr; fi; else if run load_dtb; then bootm $load_uimage_addr - $load_dtb_addr; else bootm $load_uimage_addr; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmc disks=0 1 2 3 dtb_file=/boot/dts/kirkwood-nsa310.dtb eth1addr=00:19:CB:00:51:82 ethact=egiga0 ethaddr=50:67:F0:52:9E:D9 if_netconsole=ping $serverip led_error=orange blinking led_exit=green off led_init=green blinking load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device $load_dtb_addr $dtb_file load_dtb_addr=0x1c00000 load_initrd=echo loading uInitrd ...; load $bootdev $device $load_initrd_addr /boot/uInitrd load_initrd_addr=0x1100000 load_uimage=echo loading uImage ...; load $bootdev $device $load_uimage_addr /boot/uImage load_uimage_addr=0x800000 mainlineLinux=yes mtdids=nand0=orion_nand mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) nc_ready=0 partition=nand0,2 scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 $load_uimage_addr /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_addr=0x810000 uenv_import=echo importing envs ...; env import -t $uenv_addr $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 $uenv_addr /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_ready_retry=15
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:54:15 -0700) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out MV88E1318 PHY initialized on egiga0 Using egiga0 device ARP Retry count exceeded; starting again ping failed; host 192.168.11.200 is not alive Using egiga0 device ARP Retry count exceeded; starting again ping failed; host 192.168.11.200 is not alive Using egiga0 device ARP Retry count exceeded; starting again ping failed; host 192.168.11.200 is not alive Using egiga0 device ARP Retry count exceeded; starting again ping failed; host 192.168.11.200 is not alive Using egiga0 device ARP Retry count exceeded; starting again ping failed; host 192.168.11.200 is not alive Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found Reset IDE: ide_preinit failed Unknown command 'mmc' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 15685632 3d7b0006-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available Unknown command 'mmc' - try 'help' running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 692 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 3821592 bytes read in 953 ms (3.8 MiB/s) loading uInitrd ... 7245696 bytes read in 988 ms (7 MiB/s) loading DTB /boot/dts/kirkwood-nsa310.dtb ... 13074 bytes read in 892 ms (13.7 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2017-07-20 8:11:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3821528 Bytes = 3.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.12.1-kirkwood-tld-1 Created: 2017-07-24 0:18:23 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7245632 Bytes = 6.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 0f424000, end 0fb0cf40 ... OK Loading Device Tree to 0f41d000, end 0f423311 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ZyXEL NSA310 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 239360K/262144K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 22784K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) [ 0.000000] .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000041] Switching to timer-based delay loop, resolution 5ns [ 0.000501] Console: colour dummy device 80x30 [ 0.000535] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000557] pid_max: default: 32768 minimum: 301 [ 0.000752] Security Framework initialized [ 0.000877] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000897] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001741] CPU: Testing write buffer coherency: ok [ 0.002771] Setting up static identity map for 0x100000 - 0x100058 [ 0.003059] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.006318] devtmpfs: initialized [ 0.011466] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.011492] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.011880] prandom: seed boundary self test passed [ 0.015617] prandom: 100 self tests passed [ 0.015630] pinctrl core: initialized pinctrl subsystem [ 0.016780] NET: Registered protocol family 16 [ 0.017364] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.018968] cpuidle: using governor ladder [ 0.019040] cpuidle: using governor menu [ 0.019636] Feroceon L2: Enabling L2 [ 0.019683] Feroceon L2: Cache support initialised. [ 0.025047] No ATAGs? [ 0.034526] vgaarb: loaded [ 0.034846] SCSI subsystem initialized [ 0.035327] usbcore: registered new interface driver usbfs [ 0.035406] usbcore: registered new interface driver hub [ 0.035488] usbcore: registered new device driver usb [ 0.036768] clocksource: Switched to clocksource orion_clocksource [ 0.125360] VFS: Disk quotas dquot_6.6.0 [ 0.125444] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.135971] NET: Registered protocol family 2 [ 0.136715] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.136755] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.136840] TCP: Hash tables configured (established 2048 bind 2048) [ 0.136933] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.136962] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.137138] NET: Registered protocol family 1 [ 0.137554] RPC: Registered named UNIX socket transport module. [ 0.137567] RPC: Registered udp transport module. [ 0.137574] RPC: Registered tcp transport module. [ 0.137581] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.137822] Unpacking initramfs... [ 0.794732] Freeing initrd memory: 7076K [ 0.795022] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.796026] audit: initializing netlink subsys (disabled) [ 0.796471] Initialise system trusted keyrings [ 0.796522] Key type blacklist registered [ 0.796617] audit: type=2000 audit(0.789:1): state=initialized audit_enabled=0 res=1 [ 0.796710] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.796848] zbud: loaded [ 0.797851] NFS: Registering the id_resolver key type [ 0.797886] Key type id_resolver registered [ 0.797895] Key type id_legacy registered [ 0.797913] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.797924] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.798117] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.798308] fuse init (API version 7.26) [ 0.798654] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.798861] orangefs_init: module version upstream loaded [ 0.798873] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.556779] random: fast init done [ 6.642651] Key type asymmetric registered [ 6.642668] Asymmetric key parser 'x509' registered [ 6.642735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 6.642746] io scheduler noop registered [ 6.642755] io scheduler deadline registered [ 6.642835] io scheduler cfq registered (default) [ 6.644126] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 6.645993] mvebu-pcie mbus@f1000000:pcie-controller@82000000: PCI host bridge to bus 0000:00 [ 6.646015] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 6.646029] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 6.646043] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.646372] PCI: bus0: Fast back to back transfers disabled [ 6.646396] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 6.676844] PCI: bus1: Fast back to back transfers disabled [ 6.677053] pci 0000:00:01.0: BAR 14: assigned [mem 0xe0000000-0xe00fffff] [ 6.677069] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 6.677089] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 6.677105] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref] [ 6.677129] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref] [ 6.677151] pci 0000:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 6.677167] pci 0000:00:01.0: PCI bridge to [bus 01] [ 6.677180] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 6.677196] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff] [ 6.677289] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 6.677814] mv_xor f1060800.xor: Marvell shared XOR driver [ 6.737517] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 6.737745] mv_xor f1060900.xor: Marvell shared XOR driver [ 6.797504] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 6.797957] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.799325] console [ttyS0] disabled [ 6.799396] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 7.510355] console [ttyS0] enabled [ 7.522248] loop: module loaded [ 7.525973] sata_mv f1080000.sata: slots 32 ports 2 [ 7.533712] scsi host0: sata_mv [ 7.537357] scsi host1: sata_mv [ 7.540765] ata1: SATA max UDMA/133 irq 32 [ 7.544882] ata2: SATA max UDMA/133 irq 32 [ 7.549823] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 7.556287] nand: Samsung NAND 128MiB 3,3V 8-bit [ 7.560960] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.568591] Scanning device for bad blocks [ 7.665355] Bad eraseblock 962 at 0x000007840000 [ 7.675937] 9 ofpart partitions found on MTD device orion_nand [ 7.681816] Creating 9 MTD partitions on "orion_nand": [ 7.687003] 0x000000000000-0x000000100000 : "uboot" [ 7.693231] 0x000000100000-0x000000180000 : "uboot_env" [ 7.699851] 0x000000180000-0x000000200000 : "key_store" [ 7.706405] 0x000000200000-0x000000280000 : "info" [ 7.712432] 0x000000280000-0x000000c80000 : "etc" [ 7.718381] 0x000000c80000-0x000001680000 : "kernel_1" [ 7.724743] 0x000001680000-0x000004640000 : "rootfs1" [ 7.731396] 0x000004640000-0x000005040000 : "kernel_2" [ 7.737898] 0x000005040000-0x000008000000 : "rootfs2" [ 7.745747] libphy: Fixed MDIO Bus: probed [ 7.750788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.757402] ehci-pci: EHCI PCI platform driver [ 7.761926] ehci-orion: EHCI orion driver [ 7.766158] orion-ehci f1050000.ehci: EHCI Host Controller [ 7.771767] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 7.779677] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 7.806795] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 7.813099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.819968] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.827266] usb usb1: Product: EHCI Host Controller [ 7.832171] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 7.838941] usb usb1: SerialNumber: f1050000.ehci [ 7.844313] hub 1-0:1.0: USB hub found [ 7.848184] hub 1-0:1.0: 1 port detected [ 7.852738] usbcore: registered new interface driver usb-storage [ 7.859179] mousedev: PS/2 mouse device common for all mice [ 7.865075] rtc-mv f1010300.rtc: invalid RTC date, resetting to January 1st, 2013 [ 7.872942] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 7.879909] ata1: SATA link down (SStatus 0 SControl F300) [ 7.885742] i2c /dev entries driver [ 7.892439] hidraw: raw HID events driver (C) Jiri Kosina [ 7.898284] drop_monitor: Initializing network drop monitor service [ 7.904818] NET: Registered protocol family 17 [ 7.909393] Key type dns_resolver registered [ 7.914600] registered taskstats version 1 [ 7.918749] Loading compiled-in X.509 certificates [ 7.923622] zswap: loaded using pool lzo/zbud [ 7.938071] Key type big_key registered [ 7.951480] Key type encrypted registered [ 7.957225] rtc-mv f1010300.rtc: setting system clock to 2013-01-01 23:15:52 UTC (1357082152) [ 8.206795] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.213563] ata2: SATA link down (SStatus 0 SControl F300) [ 8.216487] Freeing unused kernel memory: 1024K Loading, please wait... starting version 232 [ 8.428699] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 8.435461] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.456898] usb 1-1: Product: USB2.0 Hub [ 8.473978] hub 1-1:1.0: USB hub found [ 8.487344] hub 1-1:1.0: 4 ports detected [ 8.692068] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 8.726975] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 8.733800] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xd0d46000, 00:00:00:00:00:30, XID 083000c0 IRQ 33 [ 8.795944] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 8.816862] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 8.969083] usb 1-1.3: New USB device found, idVendor=0930, idProduct=6545 [ 8.976023] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.996147] usb 1-1.3: Product: DataTraveler 2.0 [ 9.005716] usb 1-1.3: Manufacturer: Kingston [ 9.014719] usb 1-1.3: SerialNumber: 001372997B6DB91095FD035B [ 9.027831] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 9.044180] scsi host2: usb-storage 1-1.3:1.0 [ 9.127999] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 9.135803] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 10.088032] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 10.102878] sd 2:0:0:0: [sda] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 10.117250] sd 2:0:0:0: [sda] Write Protect is off [ 10.126933] sd 2:0:0:0: [sda] No Caching mode page found [ 10.132319] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 10.882203] sda: sda1 [ 10.889382] sd 2:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Warning: fsck not present, so skipping root file system [ 19.269269] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 19.287813] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'debian'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [....] Synthesizing the initial hotplug events...[ 21.658875] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ ok done. [....] Waiting for /dev to be fully populated...[ 22.017380] hwmon_vid: Unknown VRM version of your CPU [ 22.022604] adt7475 0-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 22.140629] adt7475 0-002e: ADT7476 device, revision 1 [ 22.191252] adt7475 0-002e: Optional features: in0 in4 fan4 pwm2 vid [ 22.202615] marvell-cesa f1030000.crypto: CESA device successfully registered [ 22.204008] orion_wdt: Initial timeout 21 sec [ 22.296293] sd 2:0:0:0: Attached scsi generic sg0 type 0 done. [ ok ] Activating swap:. [ 23.569964] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1 e2fsck 1.43.4 (31-Jan-2017) Superblock last mount time (Sat Mar 9 05:19:29 2019, now = Tue Jan 1 15:16:07 2013) is in the future. Fix? yes Superblock last write time (Sat Mar 9 05:19:42 2019, now = Tue Jan 1 15:16:07 2013) is in the future. Fix? yes Pass 1: Checking inodes, blocks, and sizes [ 24.626999] random: crng init done / 8.2% Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information rootfs: 14453/490560 files (7.3% non-contiguous), 171886/1960704 blocks . ok [ 32.410291] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if[ ok location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Failed to get interface index: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. ifup: failed to bring up eth0 failed. [ 35.754088] NET: Registered protocol family 10 [ 35.761201] Segment Routing with IPv6 [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1299 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting NTP server: ntpd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1298 (klogd) . ok [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login:
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:54:15 -0700) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out MV88E1318 PHY initialized on egiga0 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... Use USB retry period from the environment: 15 second(s) 1 Storage Device(s) found Reset IDE: ide_preinit failed Unknown command 'mmc' - try 'help' Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 15685632 3d7b0006-01 83 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 ## Unknown partition table type 0 loading envs from usb 0 ... ** File not found /boot/uEnv.txt ** no IDE devices available Unknown command 'mmc' - try 'help' running scan_disk ... Scan device usb device usb 0:1 1 bytes read in 722 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 4430168 bytes read in 1052 ms (4 MiB/s) loading uInitrd ... 8181391 bytes read in 1208 ms (6.5 MiB/s) loading DTB /boot/dts/kirkwood-nsa310.dtb ... 12568 bytes read in 862 ms (13.7 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-4.20.6-kirkwood-tld-1 Created: 2019-03-09 17:19:43 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4430104 Bytes = 4.2 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs-4.20.6-kirkwood-tld-1 Created: 2019-03-09 17:19:54 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 8181327 Bytes = 7.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Loading Kernel Image ... OK Loading Ramdisk to 0f340000, end 0fb0d64f ... OK Loading Device Tree to 0f339000, end 0f33f117 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.20.6-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Thu Jan 31 21:41:45 PST 2019 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ZyXEL NSA310 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x4e8 with crng_init=0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 236340K/262144K available (9216K kernel code, 806K rwdata, 2912K rodata, 1024K init, 290K bss, 25804K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 807 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 291 kB) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000046] Switching to timer-based delay loop, resolution 5ns [ 0.000813] Console: colour dummy device 80x30 [ 0.000865] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000891] pid_max: default: 32768 minimum: 301 [ 0.001261] LSM: Security Framework initializing [ 0.001429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002534] CPU: Testing write buffer coherency: ok [ 0.004187] Setting up static identity map for 0x100000 - 0x100058 [ 0.004489] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.004768] rcu: Hierarchical SRCU implementation. [ 0.008035] devtmpfs: initialized [ 0.015239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.015269] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.015611] prandom: seed boundary self test passed [ 0.019799] prandom: 100 self tests passed [ 0.019813] pinctrl core: initialized pinctrl subsystem [ 0.021270] NET: Registered protocol family 16 [ 0.021997] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.022759] audit: initializing netlink subsys (disabled) [ 0.024026] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.024147] cpuidle: using governor ladder [ 0.024226] cpuidle: using governor menu [ 0.025000] Feroceon L2: Enabling L2 [ 0.025048] Feroceon L2: Cache support initialised. [ 0.030427] No ATAGs? [ 0.039637] vgaarb: loaded [ 0.040000] SCSI subsystem initialized [ 0.040552] usbcore: registered new interface driver usbfs [ 0.040625] usbcore: registered new interface driver hub [ 0.040686] usbcore: registered new device driver usb [ 0.040872] pps_core: LinuxPPS API ver. 1 registered [ 0.040884] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.040911] PTP clock support registered [ 0.042165] clocksource: Switched to clocksource orion_clocksource [ 0.147121] VFS: Disk quotas dquot_6.6.0 [ 0.147213] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.156854] NET: Registered protocol family 2 [ 0.157702] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.157736] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.157771] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.157803] TCP: Hash tables configured (established 2048 bind 2048) [ 0.157893] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.157918] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.158138] NET: Registered protocol family 1 [ 0.158784] RPC: Registered named UNIX socket transport module. [ 0.158797] RPC: Registered udp transport module. [ 0.158805] RPC: Registered tcp transport module. [ 0.158813] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.159072] Unpacking initramfs... [ 0.890685] Freeing initrd memory: 7992K [ 0.891111] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.892458] Initialise system trusted keyrings [ 0.892519] Key type blacklist registered [ 0.892753] workingset: timestamp_bits=30 max_order=16 bucket_order=0 [ 0.892849] zbud: loaded [ 0.893914] NFS: Registering the id_resolver key type [ 0.893944] Key type id_resolver registered [ 0.893953] Key type id_legacy registered [ 0.893974] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.893984] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.894294] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.894518] fuse init (API version 7.28) [ 0.894915] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.895100] orangefs_init: module version upstream loaded [ 0.895113] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 2.552172] random: fast init done [ 6.971924] Key type asymmetric registered [ 6.971943] Asymmetric key parser 'x509' registered [ 6.972017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 6.972038] io scheduler noop registered [ 6.972048] io scheduler deadline registered [ 6.972292] io scheduler cfq registered (default) [ 6.973744] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 6.975649] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 6.975673] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.975688] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 6.975702] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 6.977305] PCI: bus0: Fast back to back transfers disabled [ 6.977334] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 7.003466] PCI: bus1: Fast back to back transfers disabled [ 7.003705] pci 0000:00:01.0: BAR 15: assigned [mem 0xe0000000-0xe00fffff pref] [ 7.003723] pci 0000:00:01.0: BAR 13: assigned [io 0x10000-0x10fff] [ 7.003739] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0100000-0xe01007ff pref] [ 7.003760] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref] [ 7.003777] pci 0000:01:00.0: BAR 4: assigned [mem 0xe0010000-0xe0013fff 64bit pref] [ 7.003801] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0014000-0xe0014fff 64bit pref] [ 7.003824] pci 0000:01:00.0: BAR 0: assigned [io 0x10000-0x100ff] [ 7.003841] pci 0000:00:01.0: PCI bridge to [bus 01] [ 7.003855] pci 0000:00:01.0: bridge window [io 0x10000-0x10fff] [ 7.003875] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe00fffff pref] [ 7.003987] pcieport 0000:00:01.0: enabling device (0140 -> 0143) [ 7.004569] mv_xor f1060800.xor: Marvell shared XOR driver [ 7.062979] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 7.063224] mv_xor f1060900.xor: Marvell shared XOR driver [ 7.122970] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 7.123442] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 7.124727] printk: console [ttyS0] disabled [ 7.124803] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 7.890506] printk: console [ttyS0] enabled [ 7.901855] loop: module loaded [ 7.905645] sata_mv f1080000.sata: slots 32 ports 2 [ 7.913256] scsi host0: sata_mv [ 7.916879] scsi host1: sata_mv [ 7.920226] ata1: SATA max UDMA/133 irq 32 [ 7.924407] ata2: SATA max UDMA/133 irq 32 [ 7.929326] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 7.935828] nand: Samsung NAND 128MiB 3,3V 8-bit [ 7.940467] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.948101] Scanning device for bad blocks [ 8.045423] Bad eraseblock 962 at 0x000007840000 [ 8.056036] 9 fixed-partitions partitions found on MTD device orion_nand [ 8.062792] Creating 9 MTD partitions on "orion_nand": [ 8.067956] 0x000000000000-0x000000100000 : "uboot" [ 8.074113] 0x000000100000-0x000000180000 : "uboot_env" [ 8.080466] 0x000000180000-0x000000200000 : "key_store" [ 8.087058] 0x000000200000-0x000000280000 : "info" [ 8.093022] 0x000000280000-0x000000c80000 : "etc" [ 8.098922] 0x000000c80000-0x000001680000 : "kernel_1" [ 8.105308] 0x000001680000-0x000004640000 : "rootfs1" [ 8.111822] 0x000004640000-0x000005040000 : "kernel_2" [ 8.118211] 0x000005040000-0x000008000000 : "rootfs2" [ 8.125850] libphy: Fixed MDIO Bus: probed [ 8.130696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.137317] ehci-pci: EHCI PCI platform driver [ 8.141840] ehci-orion: EHCI orion driver [ 8.146089] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.151627] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 8.159580] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 8.192190] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.198535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 [ 8.206888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.214187] usb usb1: Product: EHCI Host Controller [ 8.219089] usb usb1: Manufacturer: Linux 4.20.6-kirkwood-tld-1 ehci_hcd [ 8.225860] usb usb1: SerialNumber: f1050000.ehci [ 8.231208] hub 1-0:1.0: USB hub found [ 8.235072] hub 1-0:1.0: 1 port detected [ 8.239721] usbcore: registered new interface driver usb-storage [ 8.246200] mousedev: PS/2 mouse device common for all mice [ 8.252437] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0 [ 8.259536] i2c /dev entries driver [ 8.264478] ata1: SATA link down (SStatus 0 SControl F300) [ 8.271881] hidraw: raw HID events driver (C) Jiri Kosina [ 8.277707] drop_monitor: Initializing network drop monitor service [ 8.284456] NET: Registered protocol family 17 [ 8.289217] Key type dns_resolver registered [ 8.294608] registered taskstats version 1 [ 8.298725] Loading compiled-in X.509 certificates [ 8.303642] zswap: loaded using pool lzo/zbud [ 8.339096] Key type big_key registered [ 8.357487] Key type encrypted registered [ 8.363623] rtc-mv f1010300.rtc: setting system clock to 2019-03-09 17:24:26 UTC (1552152266) [ 8.602194] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.614037] ata2: SATA link down (SStatus 0 SControl F300) [ 8.632654] Freeing unused kernel memory: 1024K [ 8.637821] Checked W+X mappings: passed, no W+X pages found [ 8.643534] Run /init as init process Loading, please wait... starting version 232 [ 8.749005] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 8.763150] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 8.777148] random: udevadm: uninitialized urandom read (16 bytes read) [ 8.804099] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 8.822298] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 8.829473] usb 1-1: Product: USB2.0 Hub [ 8.849946] hub 1-1:1.0: USB hub found [ 8.864888] hub 1-1:1.0: 4 ports detected [ 9.165130] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 9.171855] r8169 0000:01:00.0 (unnamed net_device) (uninitialized): rtl_phyar_cond == 0 (loop: 20, delay: 25). [ 9.192255] usb 1-1.3: new high-speed USB device number 3 using orion-ehci [ 9.272296] r8169: probe of 0000:01:00.0 failed with error -5 [ 9.354485] usb 1-1.3: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.10 [ 9.370381] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.384169] usb 1-1.3: Product: DataTraveler 2.0 [ 9.388843] usb 1-1.3: Manufacturer: Kingston [ 9.402278] usb 1-1.3: SerialNumber: 001372997B6DB91095FD035B [ 9.415956] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 9.432482] scsi host2: usb-storage 1-1.3:1.0 [ 9.674631] usbcore: registered new interface driver uas Begin: Loading essential drivers ... done. [ 10.483443] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 10.499162] sd 2:0:0:0: [sda] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 10.514782] sd 2:0:0:0: [sda] Write Protect is off [ 10.522277] sd 2:0:0:0: [sda] No Caching mode page found [ 10.527626] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 11.291862] sda: sda1 [ 11.300138] sd 2:0:0:0: [sda] Attached SCSI removable disk Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: clean, 19099/490560 files, 229386/1960704 blocks done. [ 19.958933] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 19.978758] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ ok ] Setting hostname to 'debian'...done. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...[ 22.450272] input: gpio_keys as /devices/platform/gpio_keys/input/input0 done. [....] Waiting for /dev to be fully populated...[ 22.851438] hwmon_vid: Unknown VRM version of your CPU [ 22.878316] orion_wdt: Initial timeout 21 sec [ 22.884490] adt7475 0-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 23.009585] adt7475 0-002e: ADT7476 device, revision 1 [ 23.043619] marvell-cesa f1030000.crypto: CESA device successfully registered [ 23.071985] adt7475 0-002e: Optional features: in0 in4 fan4 pwm2 vid [ 23.124354] sd 2:0:0:0: Attached scsi generic sg0 type 0 done. [ ok ] Activating swap:. [ 24.390693] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable.. [ 25.401424] random: crng init done [ 25.404916] random: 7 urandom warning(s) missed due to ratelimiting [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "enp1s0" Failed to get interface index: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging.. exiting. ifup: failed to bring up enp1s0 failed. [ 28.012576] NET: Registered protocol family 10 [ 28.019894] Segment Routing with IPv6 [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1305 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1308 (klogd) . ok [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login: root Password: Last login: Sat Mar 9 09:21:47 PST 2019 on ttyS0 Linux debian 4.20.6-kirkwood-tld-1 #1 PREEMPT Thu Jan 31 21:41:45 PST 2019 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@debian:~# ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 root@debian:~# ip link set enp1s0 up Cannot find device "enp1s0" root@debian:~# ip link set eth0 up Cannot find device "eth0"
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 09, 2019 05:36PM |
Admin Registered: 13 years ago Posts: 18,560 |
Quote
C. Add uEnv.txt to /boot directory (Optional)
To adjust the default envs to your specific configuration, and not having to permanently alter u-boot envs NAND. Create a text file in /boot directory with the content in the format that u-boot envs are listed.
Examples:
The example below only to demonstrate the syntax in uEnv.txt (they might or might not apply to your current settings):
- Load appropriate DTB file for the kernel to run GoFlex Net box.
- Use SD card, USB and SATA for booting. The kernel and rootfs search order is as they are appeared on the list: mmc, usb, ide.
- Define that there are 8 storage devices (i.e. disk partitions).
cat /boot/uEnv.txt
dtb_file=/boot/dts/kirkwood-goflexnet.dtb
devices=mmc usb ide
disks=0 1 2 3 4 5 6 7
mtdparts=mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2)
fw_setenv mtdparts 'mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2)
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 11, 2019 03:35PM |
Registered: 5 years ago Posts: 7 |
mtdparts=mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0x200000(etc),0x600000(kernel_1),0x37C0000(rootfs1),0x600000(kernel_2),0x37C0000(rootfs2)
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood March 11, 2019 05:04PM |
Admin Registered: 13 years ago Posts: 18,560 |
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood May 17, 2019 04:15AM |
Registered: 5 years ago Posts: 7 |
[ 416.450303] ata2.15: Port Multiplier 1.2, 0x197b:0x575f r0, 15 ports, feat 0x5/0xf
root@debian:~# iperf3 -c 10.42.0.1 Connecting to host 10.42.0.1, port 5201 [ 4] local 10.42.0.58 port 56184 connected to 10.42.0.1 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.02 sec 52.5 MBytes 431 Mbits/sec 0 195 KBytes [ 4] 1.02-2.00 sec 48.8 MBytes 417 Mbits/sec 0 195 KBytes [ 4] 2.00-3.02 sec 52.5 MBytes 432 Mbits/sec 0 195 KBytes [ 4] 3.02-4.02 sec 51.2 MBytes 432 Mbits/sec 0 195 KBytes [ 4] 4.02-5.01 sec 48.8 MBytes 414 Mbits/sec 0 195 KBytes [ 4] 5.01-6.00 sec 51.2 MBytes 432 Mbits/sec 0 195 KBytes [ 4] 6.00-7.02 sec 52.5 MBytes 431 Mbits/sec 0 195 KBytes [ 4] 7.02-8.01 sec 48.8 MBytes 416 Mbits/sec 0 195 KBytes [ 4] 8.01-9.00 sec 51.2 MBytes 432 Mbits/sec 0 195 KBytes [ 4] 9.00-10.00 sec 51.2 MBytes 431 Mbits/sec 0 195 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 509 MBytes 427 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 509 MBytes 427 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 10.42.0.1 Connecting to host 10.42.0.1, port 5201 Reverse mode, remote host 10.42.0.1 is sending [ 4] local 10.42.0.58 port 56188 connected to 10.42.0.1 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 63.0 MBytes 529 Mbits/sec [ 4] 1.00-2.00 sec 67.1 MBytes 562 Mbits/sec [ 4] 2.00-3.00 sec 66.2 MBytes 556 Mbits/sec [ 4] 3.00-4.00 sec 63.2 MBytes 531 Mbits/sec [ 4] 4.00-5.00 sec 67.0 MBytes 562 Mbits/sec [ 4] 5.00-6.00 sec 67.0 MBytes 562 Mbits/sec [ 4] 6.00-7.00 sec 63.2 MBytes 531 Mbits/sec [ 4] 7.00-8.00 sec 66.0 MBytes 554 Mbits/sec [ 4] 8.00-9.00 sec 67.2 MBytes 564 Mbits/sec [ 4] 9.00-10.00 sec 64.6 MBytes 542 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 658 MBytes 552 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 655 MBytes 549 Mbits/sec receiver iperf Done.
root@debian:~# ethtool enp1s0 Settings for enp1s0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes root@debian:~# ethtool -k enp1s0 | grep -v fixed Cannot get device udp-fragmentation-offload settings: Operation not supported Features for enp1s0: rx-checksumming: on tx-checksumming: off tx-checksum-ipv4: off tx-checksum-ipv6: off scatter-gather: off tx-scatter-gather: off tcp-segmentation-offload: off tx-tcp-segmentation: off tx-tcp-mangleid-segmentation: off tx-tcp6-segmentation: off udp-fragmentation-offload: off generic-segmentation-offload: off [requested on] generic-receive-offload: on rx-vlan-offload: on tx-vlan-offload: on tx-nocache-copy: off rx-fcs: off rx-all: off
root@debian:~# ethtool -K enp1s0 tx on sg on tso on Cannot get device udp-fragmentation-offload settings: Operation not supported Cannot get device udp-fragmentation-offload settings: Operation not supported Actual changes: tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ipv6: on scatter-gather: on tx-scatter-gather: on tcp-segmentation-offload: on tx-tcp-segmentation: on tx-tcp-mangleid-segmentation: on tx-tcp6-segmentation: on generic-segmentation-offload: on
root@debian:~# iperf3 -c 10.42.0.1 Connecting to host 10.42.0.1, port 5201 [ 4] local 10.42.0.58 port 56742 connected to 10.42.0.1 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.01 sec 88.8 MBytes 740 Mbits/sec 0 140 KBytes [ 4] 1.01-2.01 sec 88.8 MBytes 739 Mbits/sec 0 156 KBytes [ 4] 2.01-3.01 sec 87.5 MBytes 738 Mbits/sec 0 156 KBytes [ 4] 3.01-4.01 sec 88.8 MBytes 745 Mbits/sec 0 164 KBytes [ 4] 4.01-5.01 sec 88.8 MBytes 740 Mbits/sec 0 164 KBytes [ 4] 5.01-6.00 sec 87.5 MBytes 740 Mbits/sec 0 174 KBytes [ 4] 6.00-7.01 sec 88.8 MBytes 742 Mbits/sec 0 174 KBytes [ 4] 7.01-8.01 sec 88.8 MBytes 744 Mbits/sec 0 266 KBytes [ 4] 8.01-9.00 sec 88.8 MBytes 751 Mbits/sec 0 266 KBytes [ 4] 9.00-10.00 sec 90.0 MBytes 752 Mbits/sec 0 266 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 886 MBytes 743 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 886 MBytes 743 Mbits/sec receiver iperf Done. root@debian:~# iperf3 -R -c 10.42.0.1 Connecting to host 10.42.0.1, port 5201 Reverse mode, remote host 10.42.0.1 is sending [ 4] local 10.42.0.58 port 56746 connected to 10.42.0.1 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 66.8 MBytes 559 Mbits/sec [ 4] 1.00-2.00 sec 68.0 MBytes 571 Mbits/sec [ 4] 2.00-3.00 sec 68.0 MBytes 571 Mbits/sec [ 4] 3.00-4.00 sec 67.5 MBytes 566 Mbits/sec [ 4] 4.00-5.00 sec 67.6 MBytes 568 Mbits/sec [ 4] 5.00-6.00 sec 68.0 MBytes 570 Mbits/sec [ 4] 6.00-7.00 sec 68.0 MBytes 569 Mbits/sec [ 4] 7.00-8.00 sec 67.5 MBytes 567 Mbits/sec [ 4] 8.00-9.00 sec 67.8 MBytes 568 Mbits/sec [ 4] 9.00-10.00 sec 67.9 MBytes 571 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 680 MBytes 570 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 677 MBytes 568 Mbits/sec receiver iperf Done.
root@debian:~# uname -a Linux debian 5.1.0-kirkwood-tld-1 #1 PREEMPT Tue May 7 00:16:02 PDT 2019 armv5tel GNU/Linux
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood May 17, 2019 05:34AM |
Admin Registered: 13 years ago Posts: 18,560 |
> root@debian:~# uname -a > Linux debian 5.1.0-kirkwood-tld-1 #1 PREEMPT Tue > May 7 00:16:02 PDT 2019 armv5tel GNU/Linux >
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood June 15, 2019 05:21AM |
Admin Registered: 13 years ago Posts: 18,560 |
root@HomeBackup:~# iperf -n2000M -i 3 -c homembp.local ------------------------------------------------------------ Client connecting to homembp.local, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.227 port 45010 connected with 192.168.0.234 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 3.0 sec 283 MBytes 792 Mbits/sec [ 3] 3.0- 6.0 sec 283 MBytes 791 Mbits/sec [ 3] 6.0- 9.0 sec 283 MBytes 791 Mbits/sec [ 3] 9.0-12.0 sec 284 MBytes 793 Mbits/sec [ 3] 12.0-15.0 sec 283 MBytes 792 Mbits/sec [ 3] 15.0-18.0 sec 280 MBytes 782 Mbits/sec [ 3] 18.0-21.0 sec 284 MBytes 793 Mbits/sec [ 3] 0.0-21.2 sec 1.95 GBytes 791 Mbits/sec root@HomeMBP:~# iperf -s -i 3 ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.234 port 5001 connected with 192.168.0.227 port 45010 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 3.0 sec 283 MBytes 790 Mbits/sec [ 4] 3.0- 6.0 sec 283 MBytes 791 Mbits/sec [ 4] 6.0- 9.0 sec 283 MBytes 792 Mbits/sec [ 4] 9.0-12.0 sec 284 MBytes 793 Mbits/sec [ 4] 12.0-15.0 sec 283 MBytes 792 Mbits/sec [ 4] 15.0-18.0 sec 280 MBytes 783 Mbits/sec [ 4] 18.0-21.0 sec 284 MBytes 793 Mbits/sec [ 4] 0.0-21.2 sec 1.95 GBytes 790 Mbits/sec
Re: NSA310 not booting after flashing 2017.07 U-Boot Kirkwood June 15, 2019 11:02PM |
Admin Registered: 13 years ago Posts: 18,560 |